Develop Bugs

[KITCHEN][ROM] >-=+ [mu] kitchen +=-<

Placeholder for the [mu] kitchen.
DOs and DON'Ts:
DON'T:
1: DON'T ask about vista support. I'm seriously allergic to that expression. Use WinXP SP2/3 and be happy.
2: If it doesn't suit your needs, don't b**** about it and just use another one.
DOs: if you like it, say thanks.
CONSTRUCTIVE criticism/suggestions: more than welcome via PM.
^.^
### Here's the link (lzma)##############
# http://www.mediafire.com/?oufm4oq9t2v #
##############################
### Here's the link (tar+bzip2)#########
# http://www.mediafire.com/?u4tj1jsnuzt #
#############################
1: .net framework 2.0 at least needed.
2: ms vb runtimes recommended.
3: BEST uncompress with 7zip (or any app supporting lzma) / WinRAR/WinZIP to c:\
4; there is no "readme", so place your RUU_signed.nbh (and Part*.raw) into the "source" folder in the kitchen,.
5: although I tried coding it as noob-proof as possible, the kitchen DOES require some minimal knowledge about the cooking/rebuilding process.
I DON'T intend to spoon-feed you, so if you want additional features, you need to seriously catch up on some reading.
This kitchen DOES need further/extended testing, but I decided to release it after several successful tests on 2 different systems.
Nethertheless, I CAN'T possibly account for the heterogeny of every system in the wild...
I could TRY coding the "perfect" kitchen, but that would be utterly pointless, since experienced chefs use their own kitchen/or don't use frontends.
6: last but not least: even though a cooking process might've been completed, give a few seconds till you move to the next step. HDD/IO bottlenecks tend to do strange things.
^.^
The mirror/kitchen link MAY be inaccessible at times. If you REALLY need access to anything hosted, leave me a PM.
I'll provide you with another (temporary) link.
# # #
20090110 edit
Will be uploading an updated version of the kitchen maybe next week.
# # #

Pre-applaud and Pre-thanking
Thank you...................................

Thanks Cyphol.
I will of course give credit where credit is due.
What's taking me so long is that I'm trying to make the batch as easy to read as possible, all the while trying to give as much control as possible over the entire cooking process.
It should RATHER be "noob-proof".
I don't think I will finish it today, because I only have a windows box at work to test it on.
@ home I'm all unix.
^.^

adwinp said:
Thanks Cyphol.
I will of course give credit where credit is due.
What's taking me so long is that I'm trying to make the batch as easy to read as possible, all the while trying to give as much control as possible over the entire cooking process.
It should RATHER be "noob-proof".
I don't think I will finish it today, because I only have a windows box at work to test it on.
@ home I'm all unix.
^.^
Click to expand...
Click to collapse
(pre)Thanks for sharing a probably great and useful tool !

I think it will be a great kitchen because adwinp is a very hardworking man and he reads and searches a lot.

Thanks Cyphol.
I'm honoured. Though I learned a lot from you guys.
I'm nearly done with the batch file. I'll finish and test it tomorrow.
I tried giving the end user as much control as possible, even though using just one batch.
We'll see if it works.
DOS batch coding sux.
Bash rulez.
^.^

.. [reserved] .. for private use.

The [mu] ROM is coming next.
(It might take some time for me to release a ROM worth sharing with the community. I may want to wait for the next official ROM update since I'm not really satisfied with the 1.93 base).
PLEASE DON'T ask when it might be available.
^.^
Although I respect bepe's and dutty's (DP) great work, I stick with Wally regarding protecting the ROM against disasm/copying.
Meaning: No copying protections. Feel free to do with it as you please.

I won't say thanks for this kind of Kitchen. WHAT HAVE YOU DONE???
I only want to say MARVELOUS! NICE AND CLEAN! CONGRATULATIONS.

Thanks Cyphol!
The real thanks goes to the authors of the various tools this kitchen serves as a frontend to.
I doubt this is bug-free, but I hope it will be a contribution of some sort to the community I have learned so much from.
Maybe somebody will do a much better job than I did.

Sorry,
but WinRAR says the archive is destroyed.

scorpio16v said:
[...]WinRAR says the archive is destroyed.
Click to expand...
Click to collapse
Re-download and make sure your browser doesn't screw with the file extension, it's .tbz2 (tar+bzip2) otherwise your unpacker might have issues reading it.
The Archive is fine, and adwinp: the kitchen looks extremely sexy. I'm completely new to cooking and just trying it because I want a proper JVM, but I've looked at the other kitchens, and this one is the nicest so far.
If your ROM is as hot as the kitchen, I might have found myself a new base rom

cptsunshine said:
.... otherwise your unpacker might have issues reading it.
The Archive is fine...
Click to expand...
Click to collapse
You're right.
Was my WinRAR version.
Sorry for the rumour.

scorpio16v said:
You're right.
Was my WinRAR version.
Sorry for the rumour.
Click to expand...
Click to collapse
Use 7zip for any of the archive versions.
It's a fast and free archive manager, supporting lzma.
You can still uncompress the .tbz2 archive with 7zip/winrar/winzip.

Hi adwinp,
Great tool !
Thank you very much for sharing this tool !!!
I've tried it to rebuild a .nbh with some dump files associated with a RUU_signed.nbh from a stock HTC ROM.
After the first steps, all is OK (my casserole seems to smell good ) until the Build step...
I got an abort 'BuildOS.exe ....'
any idea ?

Could you post a screenshot?
Gimme a link to the stock ROM (or tell me what version it is) and I'll check it out.

OS conflict ?
Hi adwinp,
And thanks for your reply.
So, here is what I've done :
1. Copy my 4 Part0*.raw files in y=the \source folder
2. Copy the stock RUU_signed.nbh in the same folder
Notes :
> Dump files are the parts of a french ROM from Bouygues provider avalaible here : http://dl.free.fr/rkxdkK3bp
> RUU_signed.nbh file becomes from an official HTC ROM 1.37.406.1 avalaible here : http://www.4shared.com/file/5430812...io_Signed_Diamond_5226a2509_1002503_Ship.html
3. Launch mu.bat
4. select "a" to Accept
5. select "r" to Rebuilt
6. select "d" to leave it Dirty
7. select "z" to extract OS from base (OK, new folder 'casserole' with the OS.nb file)
8. select "g" to extract system files (OK, new folder 'imgfs_e' in the casserole)
9. select "y" to extract core files (OK, new folder 'xip_e' in the casserole)
10. select "p" to concatenate system (it seems good)
11. select "o" to rebuild the base...
And then, the error message :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that, I've tried to use the other method with Diamond Kitchen, and I got exactly the same error when building the OS...
plus another message :
Even if I don't really know how the BuildOS step proceeded, it seems there is an OS incompatibility or conflict, right ?

I'll try to rebuild your ROM later.
A quick question though: do you have NET Framework >= 2.0 installed?

adwinp said:
I'll try to rebuild your ROM later.
A quick question though: do you have NET Framework >= 2.0 installed?
Click to expand...
Click to collapse
A quick answer though: .NET framework 3.5
Cheer,

Hello,
@ MonteCristoffOn, you've installed Microsoft Visual C + + 2008 Redistributable Package Download

[Guide] How to Add Arabic / Persian / Hebrew support to your Kaiser

Hi everybody. I will explain the process here, it is fairly easy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is what you’re going to need:
1.Fonts/Language support: this is the most important part. I took the required files for Arabic support from this site
http://code.google.com/p/arabicandroid/downloads/list
all credit goes to Mr. alsanad for his great code
Persian and Hebrew seem to work fine with the font I'm using right now, but I can read both, so I can't say it's 100% working.
Persian: you may want to play with it a little, maybe add newer fonts later by yourself.
Hebrew: when I search Google I found only fonts for Android 1.5. however if you find the fonts, the process should be the same
anyway, the Arabic font package I am using right now apparently can display Hebrew characters...
2.7-Zip or any program that can create “tar” files
Please note that the fonts you get in most of the cases are made for HTC android devices in mind, not for WM devices. And they require recovery mode and other stuff (I can’t explain a lot because I don’t own Android device). So we’re going to convert the file, and make it suitable for our devices.
Steps:
1.Get the fonts file and extract the content to whatever place you like
In the case of Arabic, you should see two folders:
PHP:
META-INF
System
2.Select the folders, and right click on them, them choose 7-Zip > Add to Archive
3.Make sure you choose archive formate as “tar”
4.Name the file “androidupdate” and save
5.Copy the file to you SD card: put in andboot folder
6.Installing the update: I quote this from “How to replace Windows Mobile with Android”
Place the SD card in your phone and power on your Kaiser. When you see text on your screen hold down the D-pad. D-pad is that button in the center of your up, down, left, right buttons. Keep holding down the D-pad until you see something like this appear on your screen.
Click to expand...
Click to collapse
7.Choose install update: you will see then some lines and then word Installing.
8.When finished, choose quite, or soft rest.
9.You’re done
Make sure you choose the right font for your Android. Apparently each version of android requires some modifications.
You might want to add some specific keyboard. I recommend Smart Keyboard... it is super fast, very accurate, and has support for different languages, such as Arabic and Hebrew.
I tried these steps on Kaiser running VaniljEclair RLS7c with the latest kernel.
I know this guide is basically unpacking, renaming, then installing... But it might be a little hard for some people..And I hope it will help them.
Make sure you back up you date or whatever important information you have on your phone and SD card before you start.
I have uploaded the files I used for my device. these fonts are meant for android 2.1
Cheers

Duke that has got to be the best timed guide I've ever seen, just finished making up a hebrew fonts update for shar1r, lol
Excellent guide, this deserves a sticky, since it is a question that has been asked before, and will be again
I usually edit an existing androidupdate.tar using 7zip, but this method is more complete, ( my method is mostly a lazy hack ).

Awesome!! I just posted a question about this - and voila this great tutorial!
Thank you!!

Sure, no problem. glad I can help

first i gotta tell u this thread is cooool
and thank u for ur effort
but i gotta a porblem
which is first of all i couldn't download the file cuz i'm in syria and google doesn't allow to download from it
i tried ultrasurf
but the same thing happened
anyway i found that u uploaded the files that u use
and u use vaniljeclair as i do
i did the update
but it still giving me error and repeat the same lines before boot
i use vaniljeclair too but rls11 not rls7c
does it has anything to do with it??
-sorry for the long speech lol-
i appreciate ur help
and one more thing
i searched for rls7c but i couldn't find it cuz it always reach for the rls11
thank u again
peace..

man_77 said:
first i gotta tell u this thread is cooool
and thank u for ur effort
but i gotta a porblem
which is first of all i couldn't download the file cuz i'm in syria and google doesn't allow to download from it
i tried ultrasurf
but the same thing happened
anyway i found that u uploaded the files that u use
and u use vaniljeclair as i do
i did the update
but it still giving me error and repeat the same lines before boot
i use vaniljeclair too but rls11 not rls7c
does it has anything to do with it??
-sorry for the long speech lol-
i appreciate ur help
and one more thing
i searched for rls7c but i couldn't find it cuz it always reach for the rls11
thank u again
peace..
Click to expand...
Click to collapse
If the guide isn't working for you then you can always try a multi language build. I know both Scoot and I keep our multi language Cyanogen 6.1 based builds updated. You might want to look towards those.

Link in 1st post doesn't seem to be working for me either.
Yet i think you should change the title of the thread, something like:
How to add YOUR language to a build
Also:
man_77 said:
first i gotta tell u this thread is cooool
and thank u for ur effort
but i gotta a porblem
which is first of all i couldn't download the file cuz i'm in syria and google doesn't allow to download from it
i tried ultrasurf
but the same thing happened
anyway i found that u uploaded the files that u use
and u use vaniljeclair as i do
i did the update
but it still giving me error and repeat the same lines before boot
i use vaniljeclair too but rls11 not rls7c
does it has anything to do with it??
-sorry for the long speech lol-
i appreciate ur help
and one more thing
i searched for rls7c but i couldn't find it cuz it always reach for the rls11
thank u again
peace..
Click to expand...
Click to collapse
Avoid return key, learn to use space. For a moment i thought i was reading a poem...

the coder apparently switched from Google code. here is the new website
http://ardoid.com/
I would recommend using generic Froyo libs as they might work. I don't have my TyTN II anymore... all my testings are on HD2.
http://ardoid.com/?p=64
most of the mutlilang builds will have native support for Arabic/Persian fonts, however, they won't look connected.
you migh need to use "libskia.so" and/or "libwebcore.so" only in this case.
Adding language support is trail and error, so give yourself plenty of time before trying this out.
I am using the libs for the Desire HD on my HD2 and they work perfectly fine.
And yeah, you can try a program called Tor www.torproject.org or Hotspot Shield www.hotspotshield.com to change your IP address.

Hacked - socialhub for all CSC region

Hi all,
let us discuss all about the social hub hack and issues over here
Big Thanks to lasentenza and ekhalid
for wave 8500
Here is a firmware S8500XXJL2 taken from samfirmware.
Just socialhub activated.
it's a DBT CSC with KOR et DBT region.
I moved up asphalt5 because was to big to de uploaded, takes too many time.
http://www.multiupload.com/WMGXTWKQH2
Full firmware, will erase all your data.
After install with multiloader, install your CSC region: *#272*HHHH# where HHHH is time (for exemple now *#272*1410#, select DBT if you are in germany and install.
Click to expand...
Click to collapse
for wave 8530
Here is the firmware for S8530, full firmware will erase all your data and contacts so think to make back-up first. Install with multiloader.
http://www.multiupload.com/LO22XYXUX0
Normaly, socialhub is activated for all CSC: DBT, ITV, KOR, XEF, XEO and XEU
Click to expand...
Click to collapse
How to hack SHP
lasentenza said:
How to:
- 1st you have to dump CSC, PFS and APP files with trix
- after dumping go to csc/Customer/your region for example XEF for france and click right modify on customer.xml
- Change
<SocialHub>
<SocialHubType>basic</SocialHubType>
</SocialHub>
by
<SocialHub>
<SocialHubType>premium</SocialHubType>
</SocialHub>
- save the file
- Now app file
go to app/Osp/Applications/2482tqy39g/Data/
Erase clientstrings-en_US.lan and use this one
http://www.multiupload.com/VYQX8PFOG9
- for pfs file (not sure it's necessary but I can confirm, no more wave for testing)
go to pfs/appex/z7update/2482tqy39g/Data/
Erase clientstrings-en_US.lan and use the one downloaded earlier.
All your files are now ready, with trix you have now to upload files and make modified CSC, PFS and APP.
Do not forget to thanks Ekhalid for that.
One more thing, there is only one server for everybody, it works now because we are only a few to use socialhub, but not sure it will works again when more people will use it.
Click to expand...
Click to collapse

Yeah - big thanks!
And now tell me how to alter a non full firmware like jk1

good job!!! I have social premium in Norway now <33
Thanks lasentenza and ekhalid

SSH JK1
puked said:
Yeah - big thanks!
And now tell me how to alter a non full firmware like jk1
Click to expand...
Click to collapse
Hello all,
Here you are: mu/?d=Z4XETJU6 /////////// [email protected] (49.05 MB)
Not a full flash, proceed like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then install your CSC region: *#272*HHHH# where HHHH is the time on your wave (for exemple now *#272*1410#, select DBT if you are in germany and install.)
Not tested, i'm waiting for reply.

why do you need to input the code with the time ? never seen that before ! could this be the cause for my windows live account not working and showing "service not available. try later" ?

well ekhalid thanks for the upload....
but can you just tell the method to patch the files.... So that we can make our own and take some burden off you...?? Or else if you are interested and free can you patch a DDJI2 for me...??
And yeah i had a question.... Why is there no sound notification for the social hub IM...?? I mean like it should have an option to beep when someone makes a chat with us..... Dont u think so guys??

sonalswaroop said:
well ekhalid thanks for the upload....
but can you just tell the method to patch the files.... So that we can make our own and take some burden off you...?? Or else if you are interested and free can you patch a DDJI2 for me...??
And yeah i had a question.... Why is there no sound notification for the social hub IM...?? I mean like it should have an option to beep when someone makes a chat with us..... Dont u think so guys??
Click to expand...
Click to collapse
i had the same doubt but it vibrate when i receive msg..

How to:
- 1st you have to dump CSC, PFS and APP files with trix
- after dumping go to csc/Customer/your region for example XEF for france and click right modify on customer.xml
- Change
<SocialHub>
<SocialHubType>basic</SocialHubType>
</SocialHub>
by
<SocialHub>
<SocialHubType>premium</SocialHubType>
</SocialHub>
- save the file
- Now app file
go to app/Osp/Applications/2482tqy39g/Data/
Erase clientstrings-en_US.lan and use this one
http://www.multiupload.com/VYQX8PFOG9
- for pfs file (not sure it's necessary but I can confirm, no more wave for testing)
go to pfs/appex/z7update/2482tqy39g/Data/
Erase clientstrings-en_US.lan and use the one downloaded earlier.
All your files are now ready, with trix you have now to upload files and make modified CSC, PFS and APP.
Do not forget to thanks Ekhalid for that.
One more thing, there is only one server for everybody, it works now because we are only a few to use socialhub, but not sure it will works again when more people will use it.

sonalswaroop said:
Why is there no sound notification for the social hub IM...?? I mean like it should have an option to beep when someone makes a chat with us..... Dont u think so guys??
Click to expand...
Click to collapse
The social IM was the worst I've ever seen. Bada it's SO unfinished. Who id*** has made IM? It's just so ridiculous. =S

you speak about IM or palringo??

lasentenza said:
you speak about IM or palringo??
Click to expand...
Click to collapse
IM in Social Premium

lasentenza said:
...for pfs file (not sure it's necessary but I can confirm, no more wave for testing)
go to pfs/appex/z7update/2482tqy39g/Data/
Erase clientstrings-en_US.lan and use the one downloaded earlier.
Click to expand...
Click to collapse
I can not find the pfs folder using sTune and I do not know how to use Trix. Will this hack work on Bada 1.0?
Edit: I changed the file in app/Osp/Applications/2482tqy39g/Data/ only due to the fact I couldn't find pfs folder, Social Hub did not work. I guess you need to switch them in both places.

This method does not function with stune.
It's only a way to modify firmware before installing with multiloader.

lasentenza said:
This method does not function with stune.
It's only a way to modify firmware before installing with multiloader.
Click to expand...
Click to collapse
So this will not work without flashing to Bada 1.2? Am I understanding this correctly?

we have flash full firm...for use IM
I want use trix for erase the ducth widget in this firmware with social hub premium...but I don't understand how can do it...
can you help me?
please...thanks...

tibere86 said:
Edit: I changed the file in app/Osp/Applications/2482tqy39g/Data/ only due to the fact I couldn't find pfs folder, Social Hub did not work. I guess you need to switch them in both places.
Click to expand...
Click to collapse
pfs folder it's here: AppEx/z7update/2482tqy39g/Data

christer12 said:
pfs folder it's here: AppEx/z7update/2482tqy39g/Data
Click to expand...
Click to collapse
I do not have that folder I am using an unlocked S8500M from Canada running Bada 1.0. Must only be in Bada 1.2.

What does this mean?
After install with multiloader, install your CSC region: *#272*HHHH# where HHHH is time (for exemple now *#272*1410#, select DBT if you are in germany and install.
Click to expand...
Click to collapse

Thanx a bunch to ekhalid and lasentenza. Now social hub premium is running perfectly. I can get IM as push message even if IM app is not running. Just like push email works. THis works like magic. Thanx again for this wonderful work.
And on other note, for users who dont know how to use trix, go to first post, there is a full firmware posted by these great guys (ekhalid and lasentenza). Install that using multiloader. Its working for me so it should work for you to.

@AbhishekS: dont bother by it very much.because india as preconfig is not available for this fw.This thing just install network settings like APN (GPRS/3g Setting) on your phone which you dont need as they are recieved by service provider through SMS when you take a dataplan. Just flash your phone using multiloader. And when first time your phone boot up select ENG as your language. Everything is working fine i am using this fw in india without ant problem so you shouldn't have any problems with this.

[APP][Update to any Firmware region via Kies2.0][SpoofFw][Kies2.0]

A new approach!
Spoof the firmware version on the device, to trick Kies2.0.
But as you might understand, messing with system files is always dangerous and the possibility for a brick is always present. Hopefully this will not occur I'm doing my best to avoid that.
You should not use this app if you cannot get into Recovery and/or Download mode! (3 button combo) As always when you modifies system files!
Remember to disable any lagfix before updating!
For everyones safety I would recommend doing a manual backup of /system/build.prop and the complete /efs folder including nv_data.bin
The app does this automatically to the internal SDCARD, but just to be on the safe side I would recommend a manual backup to the computer aswell.
There is three steps where a reboot is required after step 2. The app will tell you what to do.
Step1.
Backup everything. If this fails, step2 is not available.
Step2.
Set the new ProductCode and PDA. Reboot!
Step3.
Set CSC and Phone. Do NOT reboot. Connect to Kies2.0 and update!
This setting is not permanent and will go back to previous setting after reboot.
Remember to disable any lagfix before updating!
Done!
-------------------------------------------------------------
How to Restore
Press restore in the menu. Reboot required.
If something fails, please send me your logcat.
So here it is: SpoofFw - requires ROOT and BusyBox
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Online Market link
If you get problems to connect to Kies after you used this program, try remove the registry key "HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB"
Please let me now if it works out for you.
If you like my work, please consider a small donation.

Thanks a lot for your patch

Hi,
I'm new to the forum and am very interested in your work, at the moment the file to "fool " Kies 2.0 has not worked for me. I have the version 2.2 of Android 9000XWJPB/I9000FOPJP3/I9000XXJPP/I9000XWJPB and product code FOP. Sorry for my english, i'm from Spain.

what is new in this ??

It does'nt entirely work. Tried and it shows me update available.
But when it supposed to start downloading new rom, it say that latest software is already installed in my phone.Then Kies resets and start over offering update again.
So, I guess it detects the real rom in the phone.
Nice patch, though. Maybe you can see what is the problem.
Thanks

Same here - I just posted in the "original" theme about kies registry patcher.
Kies finds update, and when i start upgrading, the phone disconnects, and then after 1s reconects back. I cannot upgrade.

oh crap. didnt try to actually download it. thought it would work. I'll have a look at it. sorry guys.

No panic
Obviously some can upgrade, some cannot. We are the first with this problem.
I have jpx. Could this cause problems?

Those of you who have tried the patch, can you please post your info from the registry and tell me if it worked or not. Include both product code, hidswver, softwarerevision and modelname.

For me, in the registry is still JPY everywhere, after apply patch.
PRODUCT code : GT-I9000HKDXEU
HIDSWVER: I9000XXJPY/I9000OXAJPY/I9000XXJPY/I9000XXJPY
Model Name:GT-I9000
Software Revision: I9000XXJPY/I9000OXAJPY/I9000XXJPY/I9000XXJPY

HTH....
Running Kies 2.0.0.11014_49
HIDSWVER I9000XXJPO/I9000OXAJPO/I9000XXJPP/I9000XXJPO
Product Code GT-I9000HKDTMU
Model Name GT-I9000
Doesn't work unfortunately - it offers me an upgrade, appears to download the file then gives the Disconnected error.
I've also tried manually editing the registry as per kies 1.5 but no more luck.
I've tried on 2 PCs too.

HIDSWVER: I9000BUJP7/I9000GVD2JP5/I9000BUJP5/I9000BUJP7 (SofwareRev is same)
FW: I9000BUJP7/I9000GVD2JP5(CSC)/I9000BUJP5(modem)
PCode: GT-I9000HKDVD2 (VD2)
Kies: v2.0.0.11014_49
OS: Win7 Ultimate 64bit
I checked my registry but to no avail. Also tried deleting DeviceDB key to force kies into reconstructing it. It doesn't offer the fw upgrade option at all.
At least it's good to know someone is trying to develop a way to spoof kies 2.0. Did the patch work with any previous versions of kies 2.0?

I just got some another idea: could we try to hack ProductCode on device instead of on Kies side?
AFAIU ProductCode == CSC. I've googled we can change CSC in following ways:
1) *#272*HHMM# on Android 2.1 and older
2) *#272*IMEI# on Android 2.2 and newer
3) Opening preconfing with ADB
4) Editing /efs/nv_data.bin
Would it make Kies detecting different ProductCode?
There is still one more thing we have to consider: what if Kies detects our changed ProductCode but also firmware versions that were never released for given ProductCode?

Zajec5 said:
I just got some another idea: could we try to hack ProductCode on device instead of on Kies side?
AFAIU ProductCode == CSC. I've googled we can change CSC in following ways:
1) *#272*HHMM# on Android 2.1 and older
2) *#272*IMEI# on Android 2.2 and newer
3) Opening preconfing with ADB
4) Editing /efs/nv_data.bin
Would it make Kies detecting different ProductCode?
There is still one more thing we have to consider: what if Kies detects our changed ProductCode but also firmware versions that were never released for given ProductCode?
Click to expand...
Click to collapse
I have thought about it too. But we still need to change the PDA and PHONE aswell. But I have not yet located where they are stored. My guess is it's hard coded somewhere. Still the drivers need to take it from somewhere, the question is where.

LuffarJoh said:
I have thought about it too. But we still need to change the PDA and PHONE aswell. But I have not yet located where they are stored. My guess is it's hard coded somewhere. Still the drivers need to take it from somewhere, the question is where.
Click to expand...
Click to collapse
There is something like
getBasebandVersion, but I can't track RILRequest, how is is reading RIL_REQUEST_BASEBAND_VERSION... That could show us some file with baseband version maybe.

I have had some progress.
I have managed to change all necessary codes in the phone to be able to spoof Kies. This time I passed the step that the patch didnt!
Unfortunately it's not that simple, it requires root and changes system properties. But it's all reversible. I think I'll try to make an app of it during next week. First is a final exam on Monday.
watch this space.

well, it's much more fun to develop android application then study for an exam
I have successfully switched from XEN to XEE and to DBT.
I'm almost done, just some more bug testing. I'll probably release it tonight

Good news, wait for your release tonight.

luffarjoh said:
well, it's much more fun to develop android application then study for an exam
i have successfully switched from xen to xee and to dbt.
I'm almost done, just some more bug testing. I'll probably release it tonight
Click to expand...
Click to collapse
great news!!!

I have to push the release until tomorrow, I still have some fine tuning to do! Overall is works very well

About SHW-M410K Flash

Sorry For Interupting.
I'm Having Problem With SHW-M410K Firmware.
It is not Full, but able to Part Flash.
However I had a problem
ERR : NAK_BAD_SEC_CODE 0
Error : Apps Write [0.2s]
Click to expand...
Click to collapse
I've Got Mr. Adfree's Reply
I can confirm M410K nor M410S apps_compressed.bin work in XXLD1 S8600 Firmware.
So again Question.
Boot changed??
Did you used Bootfiles from S8600 ?
Thanx.
Best Regards
Click to expand...
Click to collapse
I'm confused with reply. You mean that Wave 3 which has XXLD1 can assume SHW-M410K Firmware?

Hello.
We have same result.
NO sucess with flashing apps_compressed.bin from M410K or M410S.
Code:
Download Start Ch[0]
ERR : NAK_BAD_SEC_CODE 0
Error : Apps Write [0.2s]
Other user tested... same result:
http://www.handy-faq.de/forum/samsu...fragen_diskussion_firmware-7.html#post2288269
Die apps_compressed.bin lässt sich im übrigen bei beiden Firmwares nicht flashen.
Click to expand...
Click to collapse
Short translation:
NO apps_compressed working from M410S nor M410K
:crying:
Only reason for not working is M410K and M410S need Bootfiles.
So I think you have now Bootfiles from XXLD1 on your M410K ?
Is this correct ?
Best Regards

adfree said:
Hello.
We have same result.
NO sucess with flashing apps_compressed.bin from M410K or M410S.
Code:
Download Start Ch[0]
ERR : NAK_BAD_SEC_CODE 0
Error : Apps Write [0.2s]
Other user tested... same result:
http://www.handy-faq.de/forum/samsu...fragen_diskussion_firmware-7.html#post2288269
Short translation:
NO apps_compressed working from M410S nor M410K
:crying:
Only reason for not working is M410K and M410S need Bootfiles.
So I think you have now Bootfiles from XXLD1 on your M410K ?
Is this correct ?
Best Regards
Click to expand...
Click to collapse
Nope.
I've saw your posts(about XXLD1) carefully at yesterday.
So I was founding XXLD1 INCLUDING Bootfiles from yesterday.
However... I can't find firmware that including Bootfiles.
In Sam Mobile, I can't find Firmware INCLUDING Bootfiles, there are only excluding BootFiles
And, I'm unavailable to access Check Fus Downloader.
(Whether GUI, Non-GUI)
Can Help Me :crying:
(I'm tired of waiting HotFile 20 minutes. Uh)
/Current State
S8600XXKJC ->Turko CFW V2->S8600XXKJC(Currently Flashed)

/Current State
S8600XXKJC ->Turko CFW V2->S8600XXKJC(Currently Flashed)
Click to expand...
Click to collapse
XXKJC has folder BOOTFILES
Contain these files:
Code:
appsboot.mbn
dbl.bin
osbl.bin
partition.bin
We need these files for M410K and/or M410S...
Other ideas...
1.
Last 1024 Bytes from apps_compressed.bin...
Decrypt
replace last 1024 Bytes... from XXLD1 for instance...
Encrypt...
I can NOT try yet, because my S8600 is at Repair Service...
2.
Maybe Kies can restore M410K Original state...
http://forum.xda-developers.com/showpost.php?p=34037278&postcount=303
Now newer Version of Kies... not tested again.
3.
Sorry, I was long time not on Sam...
Sorry For Late Reply
Yes I used S8600XXKJC bootfiles for emergence flashing..
Then.. It doesn't Work?
Thanks.
Click to expand...
Click to collapse
4.
I will write PM...
Thanx in advance.
Best Regards
P.S.:
http://forum.xda-developers.com/showpost.php?p=35097338&postcount=335
CheckFusDownloader "Offline" for now...
Samsung increased Security...

For Other ideas...
1.
Last 1024 Bytes from apps_compressed.bin...
Decrypt
replace last 1024 Bytes... from XXLD1 for instance...
Encrypt...
I can NOT try yet, because my S8600 is at Repair Service...
Click to expand...
Click to collapse
You mean decrypt the LF2 apps_compressed.bin and then change last 1024 bytes, and encrypt, flash? Right?
2.
Maybe Kies can restore M410K Original state...
http://forum.xda-developers.com/showpost.php?p=34037278&postcount=303
Now newer Version of Kies... not tested again.
Click to expand...
Click to collapse
You mean downloading firmware with S/N don't you? However, I'm unable to decrypt any files. There is only M410KLF2. No .tar or .zip.
Want files?
3.
Sorry, I was long time not on Sam...
Click to expand...
Click to collapse
It's OK. I thank you You gave me hope.
4.
I will write PM...
Thanx in advance.
Best Regards
P.S.:
http://forum.xda-developers.com/showpost.php?p=35097338&postcount=335
CheckFusDownloader "Offline" for now...
Samsung increased Security...
Click to expand...
Click to collapse
Too Bad Even I had no chance to work with it.

You mean decrypt the LF2 apps_compressed.bin and then change last 1024 bytes, and encrypt, flash? Right?
Click to expand...
Click to collapse
Yes. But this could be not so easy...
I will ask some user to test it... as I can't do this without S8600...
Best Regards

adfree said:
XXKJC has folder BOOTFILES
Contain these files:
Code:
appsboot.mbn
dbl.bin
osbl.bin
partition.bin
We need these files for M410K and/or M410S...
Other ideas...
1.
Last 1024 Bytes from apps_compressed.bin...
Decrypt
replace last 1024 Bytes... from XXLD1 for instance...
Encrypt...
I can NOT try yet, because my S8600 is at Repair Service...
2.
Maybe Kies can restore M410K Original state...
http://forum.xda-developers.com/showpost.php?p=34037278&postcount=303
Now newer Version of Kies... not tested again.
3.
Sorry, I was long time not on Sam...
4.
I will write PM...
Thanx in advance.
Best Regards
P.S.:
http://forum.xda-developers.com/showpost.php?p=35097338&postcount=335
CheckFusDownloader "Offline" for now...
Samsung increased Security...
Click to expand...
Click to collapse
I wish good result, I'll wait for your result post.
FOR REAL
BEST REGARDS

adfree just you can tell what can I do

http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2357346
I have asked Gunter33, maybe he could try... as he has S8600 for test.
Best Regards

I don't Know This File? What's this?
I copied form :
Code:
C:\Users\User Name*\AppData\Local\Temp\Binary\SHW-M410K\KTF\KR
http://goo.gl/q7I2k
And.. It is Only 136mb. And No .zip or .tar
http://goo.gl/FcjXu
http://goo.gl/WTc4Z
Other that is Decrypted Or Non-Decrypted are about 200mb.
Some How, I thought It is FAKE Files.
But In Kies,(I mean I downloaded with S/N)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Meaning :
Code:
Predownloading firmware for SHW-M410K succeeded.
Please confirm your model, and click here to upgrade.
In addition.. My Kies Hates My SHW-M410K.:crying:
Code:
No Reset For GT-S8600

KRLF2KTFLF2
First 140 MB is ZIP but not complete...
Will download file 2 and 3...
But it looks it is what we have, without Bootfiles...
About playing with apps_compressed.bin and last 1024 Bytes...
http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2358591
and
http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2358960
Code:
Download Start Ch[0]
Apps 29622.3KB OK[43.5s]
Error : CMD_USB_LOCK fail
Will check later...
Best Regards

Little progress...
http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2359107
Maybe if we combine TriX Script...
DisableBadaIntegrity_v0.23.zip and/or
DisableBadaIntegrity_v0.24.zip
http://forum.xda-developers.com/showpost.php?p=34287581&postcount=249
I have "forgotten" if CheckAppIntegrity is the mandatory part...
Best Regards

If combining DisableBadaIntegrity,
can be able to run apps_compressed on GT-S8600?
CheckAppIntegrity not found (skippinG)
If there is any program that extracts firmware from phone, I will be delighted because
my father is pure bada2.0M410KKRLF2. But It is just a dream..isn't it? Impossible.

If there is any program that extracts firmware from phone
Click to expand...
Click to collapse
It is not impossible, but NOT much easier...
1.
bTerm for instance...
http://forum.xda-developers.com/showthread.php?t=1298950
But only tested/confirmed for S8500... because FOTA file...
2.
JTAG Hardware like RIFF Box for instance...
http://forum.xda-developers.com/showpost.php?p=35626872&postcount=88
If you follow Link you can find Fulldump of S8600
SAMSUNG_GTS8600_FullFlash.bin.rar
BUT this is hard to extract files and make them Multiloader compatible...
3.
Why not go Service Point or to your Provider/Operator or Shop/Saler where you buy M410K...
Best Regards

adfree said:
It is not impossible, but NOT much easier...
1.
bTerm for instance...
http://forum.xda-developers.com/showthread.php?t=1298950
But only tested/confirmed for S8500... because FOTA file...
2.
JTAG Hardware like RIFF Box for instance...
http://forum.xda-developers.com/showpost.php?p=35626872&postcount=88
If you follow Link you can find Fulldump of S8600
SAMSUNG_GTS8600_FullFlash.bin.rar
BUT this is hard to extract files and make them Multiloader compatible...
Click to expand...
Click to collapse
Will be attempted Today.
3.
Why not go Service Point or to your Provider/Operator or Shop/Saler where you buy M410K...
Click to expand...
Click to collapse
The reason why I needed firmware was to Flash my phone to original state. Yes. It can be fast.
It can be better to go Service.. But I have no time now. I have to go School Dormitory for Study start from 1, January.
Only having about 3 days.
I will attempt 2 ways that you gave, on 3days, and have 3 years good bye after.
Best Regards.

adfree said:
It is not impossible, but NOT much easier...
1.
bTerm for instance...
http://forum.xda-developers.com/showthread.php?t=1298950
But only tested/confirmed for S8500... because FOTA file...
Click to expand...
Click to collapse
Having Problem
bTerm : Able to Open
-> Check : Not Connected?

Having Problem
bTerm : Able to Open
-> Check : Not Connected?
Click to expand...
Click to collapse
Sorry.
But only tested/confirmed for S8500... because FOTA file...
Click to expand...
Click to collapse
Only in theory...
Not tested, because not enough S8600 User nor M410K or M410S User.
Sorry.
In 1 year I have seen maybe 10 S8600 user.
0 M410S User
You are the ONLY User I know with M410K...
I have tried really many things.
http://forum.gsmhosting.com/vbb/f352/korean-bada-handsets-1443940/
http://developer.bada.com/badaforum...neral-1&messageId=45758&startPage=1&curPage=1
You can see how many answers I got...
Sorry.
Best Regards

After several hours because Kies Server for this was yesterday offline...
I was able to Download few S8600 Firmware via Serial Number and also M410K Firmware...
I can confirm your KRLF2KTFLF2 for ENC3.tar is identical what I have...
1:1 same file... under Win7
...\AppData\Local\Temp\Binary\SHW-M410K\KTF\KR\KRLF2KTFLF2
File is ZIP and contain encrypted *.enc3 files... but it is NO FULL nor Bootfiles included...
Same with S8600 files I have now...
So this is what we know from CheckFusDownloader allready...
So Kies is no help.
Best Regards

adfree said:
After several hours because Kies Server for this was yesterday offline...
I was able to Download few S8600 Firmware via Serial Number and also M410K Firmware...
I can confirm your KRLF2KTFLF2 for ENC3.tar is identical what I have...
1:1 same file... under Win7
...\AppData\Local\Temp\Binary\SHW-M410K\KTF\KR\KRLF2KTFLF2
File is ZIP and contain encrypted *.enc3 files... but it is NO FULL nor Bootfiles included...
Same with S8600 files I have now...
So this is what we know from CheckFusDownloader allready...
So Kies is no help.
Best Regards
Click to expand...
Click to collapse
Meaning :
1. bTerm is only tested on S8500. So Less Possibe for S8600. Can Open but Error in Check.
2. No hope On Kies. Exact Firmware as we got. No For First(that includes OSP application files+BOOTFILES) Firmware.
3. Full Flash Bin needs progress. Less Possible.
There are many people on Korea Using SHW-M410K or S but not interested at all.
I think this is the final result ; can't find. Unabled.
I have to just use; S8600XXLD1. Bootfiles Found. But you was right. APPS_COMPRESSED.BIN IS only for SHW-M410K BOOTFILES.
Thank you for any help.
I think I have to wait for Tizen Development OR Badadroid Development On Wave3.
Or someday..will find..

There are many people on Korea Using SHW-M410K or S but not interested at all.
Click to expand...
Click to collapse
1.
Higher chance if advanced korean user with M410K and RIFF Box (JTAG) for instance...
http://forum.gsmhosting.com/vbb/f634/korean-handset-shw-xxxx-1591087/#post9062492
I have created new request, but less/low chance...
If I search for M201S or M410x nearly no posts...
2.
Maybe some friendly M410K Tester leak Bootfiles...
Low Chance...
3.
About reading Bootfiles from handset WITHOUT Hardware...
bTerm is not the only Tool...
Problem is to find the correct Tool + procedure to use...
We will see what happens in 2013...
But not count on Tizen...
For Android Porting FOTA Modificaton is missing... and as you can see.
For S8600 no ELF files leaked for "easier" Reverse Engineering...
So not expect in near future Android for S8600... nor M410x...
See here:
http://forum.xda-developers.com/showthread.php?t=1020444
Request for Boot ELFs unanswered/unsolved yet...
http://forum.xda-developers.com/showpost.php?p=32426571&postcount=68
So FOTA Developement is slow down for S8600...
Don't forget the Hardcore Display Settings... and other different Hardware...
Anyway.
We will see what happens... in 2013...
Best Regards