Hello everyone!!!
To start, I offer an apology for my English ... XD
I tell you my situation ... I sent my Moto G6 Play to repair, only hardware, when I received my phone it started without problem, but after hours, I noticed that the battery did not charge, the workshop that repaired it did not take the responsability (different history) then I searched a little bit in internet and found that could be a problem with the batery load control drivers, I found a video on youtube and I started to play the technical role, when I did the reinstallation of the dirvers, the phone started in the Bootloop and from there I get stuck, I tried flashing the ROM again, but the bootloader is not unlocked, so my phone still stuck in the bootloop, I already tried with a lot of ROMs, found all the information I could on the PowerShell screen, but I still can't flash the ROM, during the flashing commands, approximately in the second or third command I get a message from:
(Bootloader) Securtity version downgrade
I am installing the most recent version of my phone's ROM, with the correct update channel, but still, I can't repair my phone ...
Does anyone have any advice??
Related
Hello,
I recently just got the unlocked LG G3, used to have an iphone so pretty new to the Android software itself. It froze while I was playing music so I did a hard reset and with that the firmware was updated to Lollipop. Calling, messaging, and music didn't work so I attempted to downgrade my LG G3 using Flashtool (Followed exact steps on here androidexplained/howtodowngradeLgG3, can't put URL because I'm a new user) and I used the Bell firmware (I'm sure the phone is originally from Bell because they had pre-installed apps). Everything went smoothly to the very end, however it got stuck on the screen where the LED light is flashing and the logo of LG continously shines (is this boot-loop?). I've tried using PC Suite to reset the software however it doesn't recognize my phone. Is there any suggestions you would recommend me?
Thank you for the help
federer13 said:
Hello,
I recently just got the unlocked LG G3, used to have an iphone so pretty new to the Android software itself. It froze while I was playing music so I did a hard reset and with that the firmware was updated to Lollipop. Calling, messaging, and music didn't work so I attempted to downgrade my LG G3 using Flashtool (Followed exact steps on here androidexplained/howtodowngradeLgG3, can't put URL because I'm a new user) and I used the Bell firmware (I'm sure the phone is originally from Bell because they had pre-installed apps). Everything went smoothly to the very end, however it got stuck on the screen where the LED light is flashing and the logo of LG continously shines (is this boot-loop?). I've tried using PC Suite to reset the software however it doesn't recognize my phone. Is there any suggestions you would recommend me?
Thank you for the help
Click to expand...
Click to collapse
Does it boot into download mode still?
this same thing has happened to me while trying to flash twrp i guess i didnt notice that there is a d852g as well as 852 (the one i used) now its stuck on logo and i cant flash a rom so what do i do now?
federer13 said:
Hello,
I recently just got the unlocked LG G3, used to have an iphone so pretty new to the Android software itself. It froze while I was playing music so I did a hard reset and with that the firmware was updated to Lollipop. Calling, messaging, and music didn't work so I attempted to downgrade my LG G3 using Flashtool (Followed exact steps on here androidexplained/howtodowngradeLgG3, can't put URL because I'm a new user) and I used the Bell firmware (I'm sure the phone is originally from Bell because they had pre-installed apps). Everything went smoothly to the very end, however it got stuck on the screen where the LED light is flashing and the logo of LG continously shines (is this boot-loop?). I've tried using PC Suite to reset the software however it doesn't recognize my phone. Is there any suggestions you would recommend me?
Thank you for the help
Click to expand...
Click to collapse
Try to re-flash it again with the LG Flashtool and be sure to follow all steps correctly. It should work. Don't disconnect the phone until the process is finished. If the process freezes at 85% it's ok, it means the phone is rebooting and wait until you see a blue screen with a "3" on it. Then disconnect the phone and take out the phone's battery and put it in again. It should boot correctly. The first time to boot is always a bit longer. Just be patience.
Greeting from Turkey,
I couldn't get some LG updates because i rooted my phone a few months ago, so i decided to install a stock rom. I am from Turkey, and the G3 Beat is D723.
I found the right KDZ file and tried to install it with "LG Flash Tool 2014" but i was getting stucked at %2 all the time, i searched a bit and found some related topics about getting stucked at %2, according to those guides i had to install TWRP.
But unfortunately i've made a mistake here and installed TWRP for D722 via Flashify. The app asked for a reset.
After the reset the screen went full white and it slowly faded and became grey/black, like it is overvoltaged or something but later, at some point while i was trying to fix the brick i saw a USB image at the screen for half a second somehow, so the LCD is working.
The phone is working on background, i called myself and i was able to answer the phone, my alarm rang at morning, I can lock and unlock via double tap ( Screen goes white and black with lock/unlock ) etc. the touch screen is working, but totally no display.
I am able to load to download mode as well ( still no display ) but i still can't install kdz rom, it is getting stucked at %2. And this seems the only way because i can't find tot file for D723, and can't install TWRP.
There needs to be some fix for this. I really need to bring this back to life Any help counts.
Help!
XErTuX said:
Greeting from Turkey,
I couldn't get some LG updates because i rooted my phone a few months ago, so i decided to install a stock rom. I am from Turkey, and the G3 Beat is D723.
I found the right KDZ file and tried to install it with "LG Flash Tool 2014" but i was getting stucked at %2 all the time, i searched a bit and found some related topics about getting stucked at %2, according to those guides i had to install TWRP.
But unfortunately i've made a mistake here and installed TWRP for D722 via Flashify. The app asked for a reset.
After the reset the screen went full white and it slowly faded and became grey/black, like it is overvoltaged or something but later, at some point while i was trying to fix the brick i saw a USB image at the screen for half a second somehow, so the LCD is working.
The phone is working on background, i called myself and i was able to answer the phone, my alarm rang at morning, I can lock and unlock via double tap ( Screen goes white and black with lock/unlock ) etc. the touch screen is working, but totally no display.
I am able to load to download mode as well ( still no display ) but i still can't install kdz rom, it is getting stucked at %2. And this seems the only way because i can't find tot file for D723, and can't install TWRP.
There needs to be some fix for this. I really need to bring this back to life Any help counts.
Click to expand...
Click to collapse
I also have the same problem, did you get any solutions ??
Sorry, I'm using Google Translate
Hello dear friends
I'm from Brazil is have a cell phone from Sony brand model D5106
my phone was great until one day I resolve root do it is to unlock the Bootloader, right so far so good, plus my device after all not been the same anymore, because after all he came presenting problems in the system, type I reinstall the rom using FlashTool, zero start, ta all well rom ta everything perfect more dai spends a few days at most two days the system begins to shut down system processes, known is ending there cell system applications restarts, this restart he already enters an infinite loop mode, hence it is necessary I reistalar the rom again, most know the process of having to do it almost every day already is annoying is tiring already contacted the sony system they showed me use the sony pC companion the system recovery mode already done that nothing solves my problem then resolves came here for help to you because it is already very boring, I'm already thinking about breaking my phone because it is giving me a lot of headaches so thank someone get me hints on how to solve this problem, I also installed rom D5103 on my phone more still the same error a few days rom end processes and enters an infinite loop, I thank those who could help me.
So, some time ago I finally gave up on LG providing official nougat update for LG G4 so I decided to flash it and I found an official flash v29a, and everything went well.. except for my GPS. The GPS was not locking on and would take more than 100 seconds sometimes to lock on, I did not had this issue before so I decided to flash my device again hoping it would fix it, but it bricked my phone.
Now I can't reinstall or downgrade, since it would get stuck at 16% when flashing again and downgrade wont work at all. I get error 0x2000 "Invalid command Response". I have been trying to fix it for more than 6 hours now, downloading different KDZ's but it just won't work. I really need help here, I cannot afford a new phone right now. I have LG H818p version. And yes, I was using the correct version for upgrade/downgrade. I tried to hard reset it but it is still stuck on Firmware update. Urgent help is needed, since I don't have another phone to use and I really need this phone, been up all night trying to fix it..
Edit: Fixed it, don't know how tho
Hello, I would like to ask if my LG G3 is softbricked or hardbricked. It has been a long while since it decided to boot loop. I tried to fix it but got no results. I tried to factory reset it, but the next day it didn't turn on anymore and got stuck in the logo. Note : the phone was experiencing some heating issue before it decided to screw itself up. I tried numerous troubleshooting from the net, none worked. I also did try to reinstall the firmware to stock again, it did boot but it can't get to the home screen. I then factory reset it again and tried using another firmware also built for my phone (it's LG G3 D855). It failed again at 33% while it was in the firmware update mode. Now that I have left it for a solid year, I thought that it would be nice to try again. Which I did, but it couldn't charge anymore and it cannot boot to the logo. I tried to go to the download mode but no response. I tried connecting it to my computer, but it only detects my phone as a charge only device, it also detects it on only several random occasion. I hope this is a softbrick and it can be fixed at home so I don't need to go to the store to repair it.
I'm sorry for the long explanation, I had been trying to revive it for months now and had no luck. How do I fix this, at least how do I get to the firmware update download mode again? I really really hope that anyone can help. Thankyou so much in advance.
Use my guide in this thread
https://forum.xda-developers.com/lg...w-d855-30b-t3286268/post72875603#post72875603