Mobile Radio Power Not Staying on - OnePlus 3 Questions & Answers

Hi all,
So today I was updating Havoc OS to the latest build on my OnePlus 3, everything went well but it was only later when I either made of received a phone call, I would notice my network signal on both my SIM cards would disconnect then reconnect some time later.
Ive tried rolling back to the previous version I was on and still receiving the same problem.
Ive also tried stock Oxygen OS, Lineage 16 and Resurrection Remix all with the same result.
Just to check to be sure, I removed the back panel and cleaned all the antenna connections and same result.
Ive been into the phone information screen (*#*#4636#*#*) and tried manually turning on and off the radio power and still no joy.
Ive also put both the SIM card into another Duel SIM phone and there working fine.
If anyone has had some sort of experience with this sort of situation, your help would be greatly appreciated. :good:

Did you ever fix this issue?

Related

No SIM card issue

Hi all,
Am running a Galaxy S5 (klte) which I'd been using CM13 on without problem. I moved over to Lineage at the weekend - full factory reset, clear cache/Dalvik, use latest TWRP to install Lineage and re-install everything. So Saturday, Sunday, Monday everything fine. Then switch the phone off overnight (as I had done on the other nights) and switch back on this morning. The phone boots fine, no sign of any issues - but I don't get my usual "Enter your SIM PIN" screen, it boots straight to the desktop.
Can't access anything to do with phone functions and the signal icon sits as a triangle but hollow, a bit like when you get zero signal strength... it's not the SIM card with a line through it (no SIM card) icon, which is odd. Trying to access settings to select a network, or go for auto network detection draws a blank (can't access SIM card/network).
I've gone back into TWRP and cleared the cache and Dalvik again and the problem persists. I took the latest nightly (2017-02-13) and flashed that hoping it might fix it, but also no joy.
Any ideas without me having to factory reset the device and re-install everything again (pain!)
Thanks,
adamchap said:
Hi all,
Am running a Galaxy S5 (klte) which I'd been using CM13 on without problem. I moved over to Lineage at the weekend - full factory reset, clear cache/Dalvik, use latest TWRP to install Lineage and re-install everything. So Saturday, Sunday, Monday everything fine. Then switch the phone off overnight (as I had done on the other nights) and switch back on this morning. The phone boots fine, no sign of any issues - but I don't get my usual "Enter your SIM PIN" screen, it boots straight to the desktop.
Can't access anything to do with phone functions and the signal icon sits as a triangle but hollow, a bit like when you get zero signal strength... it's not the SIM card with a line through it (no SIM card) icon, which is odd. Trying to access settings to select a network, or go for auto network detection draws a blank (can't access SIM card/network).
I've gone back into TWRP and cleared the cache and Dalvik again and the problem persists. I took the latest nightly (2017-02-13) and flashed that hoping it might fix it, but also no joy.
Any ideas without me having to factory reset the device and re-install everything again (pain!)
Thanks,
Click to expand...
Click to collapse
I had this before as well. I was able to fix it using the correct modem and bootloader software. After this, it worked fine until I did a restore with TWRP. All restored but the modem was not working. I discovered a ADB command to easily fix it but I lost the bookmark for this page. ATM I am looking for this command. Something like "ADB SHELL /AUTO ....."
If you find it, please post it here. I do as well.
Regards, Gopher.
Solved not solved
Well I've been playing around a bit more testing to find exactly what it is causing this issue.
It's system profiles. I use these extensively with triggers so my phone connects to my car, goes on vibrate at work etc. With system profiles active (whole menu turned on) the issue occurs. With the profiles off, it's resolved. It does matter how the profiles are configured (I tested with just 1 profile and all settings on "do not change").
So this is something for the Lineage OS team to look at and fix in a later build because as it stands system profiles are broken, at least for klte. Does anyone else have a different experience on their device and what device are you using?
Thanks! It worked!
adamchap said:
Well I've been playing around a bit more testing to find exactly what it is causing this issue.
It's system profiles. I use these extensively with triggers so my phone connects to my car, goes on vibrate at work etc. With system profiles active (whole menu turned on) the issue occurs. With the profiles off, it's resolved. It does matter how the profiles are configured (I tested with just 1 profile and all settings on "do not change").
So this is something for the Lineage OS team to look at and fix in a later build because as it stands system profiles are broken, at least for klte. Does anyone else have a different experience on their device and what device are you using?
Click to expand...
Click to collapse
In my case I only had to turn off the whole System Profiles general button.
Same for me
I have done exactly as the first post and my sim is also not working now when it was fine. I have a Galaxy s3 i9305 lte. It's just says no sim. I have Lineage 14.1 and have updated to the latest nightly. Any ideas how to get my sim working again?
adamchap said:
Well I've been playing around a bit more testing to find exactly what it is causing this issue.
It's system profiles. I use these extensively with triggers so my phone connects to my car, goes on vibrate at work etc. With system profiles active (whole menu turned on) the issue occurs. With the profiles off, it's resolved. It does matter how the profiles are configured (I tested with just 1 profile and all settings on "do not change").
So this is something for the Lineage OS team to look at and fix in a later build because as it stands system profiles are broken, at least for klte. Does anyone else have a different experience on their device and what device are you using?
Click to expand...
Click to collapse
Same problem here and i don't use profiles Galaxy S4
adamchap said:
Well I've been playing around a bit more testing to find exactly what it is causing this issue.
It's system profiles. I use these extensively with triggers so my phone connects to my car, goes on vibrate at work etc. With system profiles active (whole menu turned on) the issue occurs. With the profiles off, it's resolved. It does matter how the profiles are configured (I tested with just 1 profile and all settings on "do not change").
So this is something for the Lineage OS team to look at and fix in a later build because as it stands system profiles are broken, at least for klte. Does anyone else have a different experience on their device and what device are you using?
Click to expand...
Click to collapse
On my S4 Mini LTE the profiles seem to sometimes stop the home button (long press) pulling up last apps used even though the button works fine as two quick presses gives me split screen. I think it's automotive profile that activates when it connects to my car Bluetooth that is the cause, but not sure as haven't had chance to pull a log.
Same here on Motorola Moto E XT1021, tried getting CyanogenMod 13, but all the mirrors are down and I don't feel like getting Android from not trusted source.
It's definitely a problem with the ROM because everything works fine on different ROMs, but on Lineage there is no SIM card detection at all and nothing seems to help.
I'm trying to get older Lineage ROM hoping it will work.
Consider removing and reassigning the PIN
Mikeyb2k said:
I have done exactly as the first post and my sim is also not working now when it was fine. I have a Galaxy s3 i9305 lte. It's just says no sim. I have Lineage 14.1 and have updated to the latest nightly. Any ideas how to get my sim working again?
Click to expand...
Click to collapse
What software was on the phone you first locked your SIM in?
Sometimes a SIM will respond to a config file that might be absent when you flash a new ROM.
If you can put your SIM in a different device that recognizes it, use that device to disable the PIN.
Then power down and eject it.
Then, re-insert it into the problem device to see if it works.
If it does, re-assign a PIN using that device.
Hey. Yeah that sounds like a good thing to try although I removed Lineage and have a stock KitKat rom now and works faultlessly. Still have root access and the s3 doesn't need a later version really. Tbh I would have been happy staying on kk if it wasn't for the tech industry moving forward with their software development! How dare they!
adamchap said:
Well I've been playing around a bit more testing to find exactly what it is causing this issue.
It's system profiles. I use these extensively with triggers so my phone connects to my car, goes on vibrate at work etc. With system profiles active (whole menu turned on) the issue occurs. With the profiles off, it's resolved. It does matter how the profiles are configured (I tested with just 1 profile and all settings on "do not change").
So this is something for the Lineage OS team to look at and fix in a later build because as it stands system profiles are broken, at least for klte. Does anyone else have a different experience on their device and what device are you using?
Click to expand...
Click to collapse
The trick with disabling the profiles works nicely on my Xperia T with the CM based Resurrection Remix ROM, android version 7.1.2.
XT has no main Profiles button, so i deleted all the profiles manually and restarted the phone. Now trying to find out which profile caused the problem.
.....
Made several new profiles, restarted the phone after each one, but the problem didn't turn back. I think it has issues only with the built-in profiles.
Thanks for the tip man!:good:
Single Sim Working Dual Sim Not
In my case when I remove both the sims and put in only one at a time regardless which slot or which sim it works but when I put two in together it doesn't, driving me to believe that the lineage is not supporting dual sim and is failing hence when both are inserted.
I am running Lineage OS 15 on my S7, and other than a few glitches, the SIM card issue is the only significant problem I have experienced. I have looked through the settings, and I found out that my baseband version is "Unknown." I tried flashing some files, in an attempt to fix it, but I still have no luck. I hope someone fixes this problem.
Hope this helps...
adamchap said:
Hi all,
Am running a Galaxy S5 (klte) which I'd been using CM13 on without problem. I moved over to Lineage at the weekend - full factory reset, clear cache/Dalvik, use latest TWRP to install Lineage and re-install everything. So Saturday, Sunday, Monday everything fine. Then switch the phone off overnight (as I had done on the other nights) and switch back on this morning. The phone boots fine, no sign of any issues - but I don't get my usual "Enter your SIM PIN" screen, it boots straight to the desktop.
Can't access anything to do with phone functions and the signal icon sits as a triangle but hollow, a bit like when you get zero signal strength... it's not the SIM card with a line through it (no SIM card) icon, which is odd. Trying to access settings to select a network, or go for auto network detection draws a blank (can't access SIM card/network).
I've gone back into TWRP and cleared the cache and Dalvik again and the problem persists. I took the latest nightly (2017-02-13) and flashed that hoping it might fix it, but also no joy.
Any ideas without me having to factory reset the device and re-install everything again (pain!)
Thanks,
Click to expand...
Click to collapse
On the latest Lineage build, I was having the issue with it not reading my SIM, so here's what I did:
-clean install of lineageOS (wipe, install rom, install gapps, and install Kernel)
It wouldn't read my SIM at this point, so I
-factory reset
-installed LG G3 Tekcafe VS985-49A_stock (I'm sure any rom would have worked though)
-installed Lineage over top of this rom and wallah! everything works great!
Download and flash this if you have sim card problem https://forum.xda-developers.com/ga...om-xperia-source-project-galaxy-core-t3616744
Please go to this thread : LINK
No access to sim card contacts
Hi all, first sorry for my english, is not my home lenguage, i have an samsung galaxy s5 SM-G900T with custom room lineage-14.1-20180309-nightly-klte-signed.zip, all fine at the moment, except that i can't wiew my contacts stored in sim card and i can't save new contacts in the sim either, any body have a solution for this issue?. Regards.
It's gapps...
Hola!
I am experiencing the same issue and I relate it to the gapps.
The sim works perfectly fine with normal lineage OS. With gapps the sim doesn't work. Reproduced 3 times.
Hello, I'm using a Grand Prime SM-G530H phone with LineageOS 16.0, and here it says, no SIM card but I have a card running normally, I uninstalled Lineage and installed the stock rom, and it normally worked the SIM card, but when I installed it back Lineage continued the same error, what can be ???
My Galaxy S5 somehow detects a Sim Card which is not even inserted. The signal strength showed at the screen is the same as the wifi strength, but never at zero. But if I try to call someone it says no sim card detected. Of course boy there isn't. The problem is that inserting the sim card changes nothing. Same Problem. I switched from lineage to the original firmware back... HELP

HTC ONE M8 SIM/Radio problem?

Got this phone from a friend and immediately flashed the last CM 14 Rom before they shut down. Flashed the experimental Lineage Rom then started the Nightlies. It's on the most recent Nightly now. The issue I'm having involves the SIM card, and now bluetooth (though that only happened once). I can't get it to connect to the network. It was an AT&T phone originally, and yesterday I finally got it unlocked to use on T-Mobile. The card is registering, I see the triangle in the status bar, but none of the solutions I've found can make it connect (the card works in another phone). When trying to connect to the network it eventually just times out. I can't even add APN settings as they won't save. This morning it forgot previous bluetooth connections as soon as I clicked on them. I'm thinking I need to flash an older radio.img but I can't find anything that isn't almost 3 years old. In addition, I can't keep the SIM unlocked. It asks for the SIM unlock PIN every time the phone boots, and the Security setting option is grayed out so I can't even turn it off. Any ideas? Is this all related to being S-on? Based on what I've read, I was under the impression that didn't matter anymore.

Airplane mode on, network problem ZUK Z2

Hello, I'm having problem with my zuk z2. I've had phone for more than a month and it worked fine. I flashed mokee rom and was working excellent. After one update it couldn't connect to network and phone was stuck in airplane mode. It's not showing that airplane mode is on, only when I press power button it says it's on, but nothing happend when pressed. It detects both sim cards but can't get registered on network. Also in secret menu (*#*#4636#*#*) shows Radio off and can't turn it on, or change anything in that menu. I changed a lot of custom and stock roms, with locked and unlocked bootloader, nothing solved the problem. When flash fresh rom it has network (not after every flash), but after some times it just gets disconnected. Please, help me. If someone have solved this problem or have any idea what problem could be.
Edit: I found out that my sim slots IMEI change places, IMEI1 goes to slot 2.
i got the same problem
Same problem here with offician Indian ZUI
damn.. i thought this happened only with china rom.
didn't know it got same issue here.
Same problem
Same problem here. 2.0.133 ST official indian ROM. Any news about this problem?
I have the same issue running Slim 6 on zuk z2
i installed mokee os and the signal comeback again but actually not worked
Yes, I also installed mokee nightly 4/22 and its been working great. Signal is back
me too
Same problem Here.... bought on banggood and after one month network signal disappeared. Today I've unlocked the bootloader and installed Mokee stable ( 13-4-2017) and Lineage 14.1 of 16-01-2017 .... nothing! Still not working.
I suppose it is a failed lot from ZUK delivered from banggood/gearbest/ali ...
I've just wrote an email to zuk support in order to complain about it ...
Yes, because, right now I cannot send back in china at my expenses the equipment and pay for a substitution with another defective terminal.
I've just asked them hoto behave....
I suppose we need to start a class action like the one against samsung for S7 note
However, I'm very disappointed, 1 month and it was looking like a wonderful terminal ...fooooook.
Same problem here. Anybody please share the QCN backup (or valid link to download this) to try repair QCN and IMEIS ?
Same problem here:
I tested different roms and different baseband-versions still no network.
Edit: I also tried flashing it via an external tool - still does not work
http://www.androidbrick.com/zuk-z2-z2-pro-qpst-qfil-miflash-rom-flashing-guide/
I install the Z2plus_MIUI8_6.12.1_zukkati.zip ROM and recover the radios. I feel good!!!!!
Then I installed 2.5.334ST via Qfil, installed TWRP and install other ROMs and everything works fine.
Any Luck guys? Please help if anyone manage to resolve this issue.
Thank you!
Same with me
I had this problem also one month ago, bricked the phone and endly I could it get working again with lingeage on it. Was working perfect.
Today the problem is there again.
When I start the phone without the simcard airplane mode is off (when I touched the power button) with the simcard in the phone it starts with airplane mode on.
Is there a possibility to disable airplane mode complete?
Anyone any idea?
This problem has been around for ages, and no apparent solution to it. Sent it back to warranty and it got flashed frm Custom ROM and back to stock ROM with same results. Useless. Dead.
Got a partial refund instead .
Guys there is any solution?? I have this problem with my Zuk Z2.. Plz help me
Problem Solved
I also had same problem tried all methods described here and in zukfans.eu, but failed. At last discharging(shorting) some capacitor related to network IC did the job.
murtoz said:
I also had same problem tried all methods described here and in zukfans.eu, but failed. At last discharging(shorting) some capacitor related to network IC did the job.
Click to expand...
Click to collapse
hey, could you provide some more info? is it hard?
Same problem
I got the same problem, could someone help me with repairing this? Flashing roms didn't help
Could you say more information about discharging capacitor? Is it possible to do in home?

Sim not detecting

Hello Guys
With unlocked bootloader, I have been to China and used local sim over there.
Now I am back to India and none of Indian SIM cards are getting detected by phone.
I tried all possible options, did reset..downgraded to Oreo also..but no luck. What ever sim card I try, it's not getting detected.
In device info, it's showing mobile radio is off, tried switching on several times..but no luck.
Can someone pls help me ASAP.
Regards
Pavan
Try resetting network settings or hard reset the device and also try flashing factory image if previous doesn't work.
If your bootloader is locked then try reaching customer support. Else, you can try restoring some efs/modem backup using twrp.
Do you get any notification when you insert the sim tray?
I may be wrong just sharing my 2 cents.
Same problem here (or similar, at least).
My 5z recognized the SIM card on both slots, but no signal.
Tried all of the four carriers from Brazil, tried a hard reset, tried the Android Q beta, switched back to Pie, nothing works.
BTW, I've seen three devices with similar problems recently. One Samsung, and two Motorolas. All of them was updated to Pie. Could be some update bug?
My problem was fixed after the May update that was released a few days ago.
Everything working fine, 4G, LTE, etc.
JNRois12 said:
Same problem here (or similar, at least).
My 5z recognized the SIM card on both slots, but no signal.
Tried all of the four carriers from Brazil, tried a hard reset, tried the Android Q beta, switched back to Pie, nothing works.
BTW, I've seen three devices with similar problems recently. One Samsung, and two Motorolas. All of them was updated to Pie. Could be some update bug?
Click to expand...
Click to collapse
Hey man, i'm from brazil too, and i'm having the same problem here.
I made root, i tried other rom, but is not working the signal...
Nothing works
LeonardoLimaMH said:
Hey man, i'm from brazil too, and i'm having the same problem here.
I made root, i tried other rom, but is not working the signal...
Nothing works
Click to expand...
Click to collapse
Like I said yesterday, I just updated to the May security patch, I now everything is working smoothly. Have you tried that?
JNRois12 said:
Like I said yesterday, I just updated to the May security patch, I now everything is working smoothly. Have you tried that?
Click to expand...
Click to collapse
Yes, I tried and do not work too :/
Still the same problem
All i get is , Device id is null, no Sim card getting detected. can't even flash any custom rom as none available.

Xiaomi Mi Mix 2 has no service and WiFi constantly drops.

Bought this phone last year. Rooted and installed Havoc OS. I used it about 6 months then got a Oneplus 6t so took it out of service. This week I decided to pop the SIM card in it and after reboot I have service for about 3 seconds then it stops and the Wifi keeps toggling on and off. Tried changing the APN.
Any help is appreciated.
update: WiFi works without the SIM card in. updated Havoc and still nothing.
cornbread624 said:
Bought this phone last year. Rooted and installed Havoc OS. I used it about 6 months then got a Oneplus 6t so took it out of service. This week I decided to pop the SIM card in it and after reboot I have service for about 3 seconds then it stops and the Wifi keeps toggling on and off. Tried changing the APN.
Any help is appreciated.
update: WiFi works without the SIM card in. updated Havoc and still nothing.
Click to expand...
Click to collapse
I have the same issue with any Android 10 or 9 I tried so far. All network and Wifi works totally fine with LineageOS 15.1, but with 16 or 17.1 I get the same problem you described. Tried Havoc as well, but it's just the same
Tried to download Pixel Experience but the download is too slow and fails at some point. As soon as I manage to install it I'll update this post!
I tried to install the carrier service (read somewhere it might help) as well, but it didn't solve the problem either. Changed the APN and the preferred network type (LTE/GSM etc). Nothing.
I also tried it with different GApps (Open Gapps, Mind the GApps, MicroG) or none at all. Same issue.
I ordered a new SIM card which again works fine with android 8.1 (LineageOS 15.1) on the same phone, but not with higher versions of android. As soon as the SIM is removed Wifi works just fine.
Ran out of ideas and will have to switch back to LineageOS 15.1, I guess...
[update] what seems to have done the trick for me was to update the firmware. I just downloaded the most recent one following this post and flashed it using TWRP (v3.3.1-1). No problems with dropping Wifi so far, network connection seems low (2 of 4 bars) but stable.

Categories

Resources