[Q] odin says" Can't open the serial(COM) port." and fails to flash recovery.tar
hey,...
i am trying to root my tmobile galaxy S2 and i am in downloading mode...put recovery.tar file in PDA section and when i hit start...nothing happens and after a while i get failed notice and says " Can't open the serial(COM) port." what am i doing wrong.
Did you install the usb drivers first? If not here:
http://www.mediafire.com/?6onrjbyd46j4lhj
that could be the only reason i can think of that odin isn't detecting phone. Also try a different usb port on the computer, and if that doesn't work try a different cable.
uninstall Kies if u have ut because the drivers stick i did and now it works lol
hlimbu00 said:
hey,...
i am trying to root my tmobile galaxy S2 and i am in downloading mode...put recovery.tar file in PDA section and when i hit start...nothing happens and after a while i get failed notice and says " Can't open the serial(COM) port." what am i doing wrong.
Click to expand...
Click to collapse
Darkshado said:
Kies could be interfering with Odin ...
Click to expand...
Click to collapse
I too was having "Can't open the Serial COM". Kies was interfering.
Go into Kies, Tools -> Preferences, unselect "Run Samsung Kies automatically when a device is connected", save the change, close out of Kies, and then restart ODIN 3. Try flashing now.
reinstall drivers with KIES. go to troubleshoot and then you should be good to go after. also check the cable too..
hlimbu00 said:
hey,...
i am trying to root my tmobile galaxy S2 and i am in downloading mode...put recovery.tar file in PDA section and when i hit start...nothing happens and after a while i get failed notice and says " Can't open the serial(COM) port." what am i doing wrong.
Click to expand...
Click to collapse
also sometimes you have to try a different version of odin before it works it happens to me alot. one odin wont work but another does. it's crazy.
Can't open the serial(COM) port Error
hlimbu00 said:
hey,...
i am trying to root my tmobile galaxy S2 and i am in downloading mode...put recovery.tar file in PDA section and when i hit start...nothing happens and after a while i get failed notice and says " Can't open the serial(COM) port." what am i doing wrong.
Click to expand...
Click to collapse
I had the same problem and I fixed it by exiting from Kies software. You might get this new error "Complete(Write) operation failed". Then all you should do is just pulling your battery out and restarting odin and phone. I disables the firewall too, but I don't think the problem was firewall. Anyway mine is working well and I did it.
Hi, I'm also having the same problem. The 'Charging paused...' message kept popping up so I tried to flash a different official rom via odin (I was on official ICS). Unfortunately the flash failed and now when I try to turn on the phone the 'Firmware upgrade encountered an isuue......' message comes up. I tried connenting to kies also but can not to do so. I have hope as i can get into download mode but can't flash a rom. I got halfway once then suddenly it failed again. Your help is much appreciated. Thanks in advance.
Thank You.
phi11yphan said:
I too was having "Can't open the Serial COM". Kies was interfering.
Go into Kies, Tools -> Preferences, unselect "Run Samsung Kies automatically when a device is connected", save the change, close out of Kies, and then restart ODIN 3. Try flashing now.
Click to expand...
Click to collapse
Thank You.
disabled Kies and problem solved
iNeedICS said:
uninstall Kies if u have ut because the drivers stick i did and now it works lol
Click to expand...
Click to collapse
Thanks, this is what was causing me this error. I was close to Hulk-smashing expensive things :laugh:
Re: [Q] odin says" Can't open the serial(COM) port." and fails to flash recovery.tar
NomadRip said:
Thanks, this is what was causing me this error. I was close to Hulk-smashing expensive things :laugh:
Click to expand...
Click to collapse
Haha yea don't resort to hulk smashing things lol just send them to me instead of breaking them I'll delightfully take them off your hands! I'll pm you my address so you can ship xD jkjklolol
Sent from Squishy's N⁴!
This worked for me
I had the same exact problem (but this was on my Galaxy Y )
What I had was an old version of KIES (~ 2011 ).
Steps :
1) Uninstall the old Kies
2) Download the latest Kies (2013)
I have installed drivers but i cant connect my phone to pc when odin mode is on in phone but i can connect phone to pc when bootloader is on or recovery mode is on . However, when i boot into recovery mode and connect phone to pc and open odin and start it ,it shoes cant open the serial (com) port.
what to do
I'm flashing stock software to phone as my phone got bricked, hurry please help me to unbrick
ttffjioo said:
I have installed drivers but i cant connect my phone to pc when odin mode is on in phone but i can connect phone to pc when bootloader is on or recovery mode is on . However, when i boot into recovery mode and connect phone to pc and open odin and start it ,it shoes cant open the serial (com) port.
what to do
I'm flashing stock software to phone as my phone got bricked, hurry please help me to unbrick
Click to expand...
Click to collapse
The phone needs to be in download mode for Odin. And kies shouldn't be running on your PC. Go to task manager and kill any kies processes.
Download mode on the phone as I remember is power button and volume down.
?
If anyone is using Odin to flash 4.1.2, I found either Odin 3.04 or to be the only ones that worked for me.
Darth said:
The phone needs to be in download mode for Odin. And kies shouldn't be running on your PC. Go to task manager and kill any kies processes.
Download mode on the phone as I remember is power button and volume down.
Click to expand...
Click to collapse
when my phone is on download mode for odin, it cant connect to pc as yellow border line is not showing on odin . I have uninstalled my kies.
tell me what to do
ttffjioo said:
when my phone is on download mode for odin, it cant connect to pc as yellow border line is not showing on odin . I have uninstalled my kies.
tell me what to do
Click to expand...
Click to collapse
Try different Odin versions perhaps. Uninstall Samsung drivers and install the newest kies again to reinstall them. Don't need to uninstall kies , just be sure all its processes are killed in your PC task manager.
There's nothing you can do until your phone and Odin are communicating. Try another cable, try another USB port on your computer. Last, try another computer.
Darth said:
Try different Odin versions perhaps. Uninstall Samsung drivers and install the newest kies again to reinstall them. Don't need to uninstall kies , just be sure all its processes are killed in your PC task manager.
There's nothing you can do until your phone and Odin are communicating. Try another cable, try another USB port on your computer. Last, try another computer.
Click to expand...
Click to collapse
I have downloaded latest kies 3 from official website with latest drivers
I uses cable of my tab 4 (which easily get connects with pc with its cable) to connect my y duos to pc.
Am i doing any thing wrong?
ttffjioo said:
I have downloaded latest kies 3 from official website with latest drivers
I uses cable of my tab 4 (which easily get connects with pc with its cable) to connect my y duos to pc.
Am i doing any thing wrong?
Click to expand...
Click to collapse
Try everything I suggested. Otherwise, I'm out of ideas unfortunately.
I'm curious, what does your phone show as in device manager in pc when connected? Or is it not being seen at all?
And Y Duos? You know this is the Tmobile S2 section, right? ?
Lots of Y Duos bricked talk here as well as other links in this thread to review.
http://forum.xda-developers.com/showthread.php?t=2275057
Hello everybody.
I've bought a new Galaxy Note 2 today, and I want to transfer the contacts from my iPhone to the Galaxy Note 2. I know I need to use it through Kies, but it won't recognize it! What should I do??
raied115 said:
Hello everybody.
I've bought a new Galaxy Note 2 today, and I want to transfer the contacts from my iPhone to the Galaxy Note 2. I know I need to use it through Kies, but it won't recognize it! What should I do??
Click to expand...
Click to collapse
First try another usb port, then reboot the pc and try again. If all fails completely uninstall Kies, reinstall it and try again.
i have same problem, kies doesnt recognise my device.
gee2012 said:
First try another usb port, then reboot the pc and try again. If all fails completely uninstall Kies, reinstall it and try again.
Click to expand...
Click to collapse
thx. it worked, but then it won't recognize the phone again...
need to uninstall it, again. this is frustrating...
I had the same problem, Samsung are still in denial! it happens to my GS3 as well. (windows 7)
A workaround is: uninstall Kies and all previous settings. (Uninstall USB driver if it isn't automatically uninstalled. )
Restart the PC, ( then check everything has uninstalled)
Download and install the latest Kies. Run the setup and (it always works with the first sync.)
But when prompted to update firmware components click cancel - Keys will prompt you to every time you connect, click cancel ( if I update it stops working )
did you try installing samsung drivers?
I have a friend he has a gt-n7100 it's a nee but kies says firmware is unsupported what can he do?
I'm running Windows 8 and after installing Kies for the first time on this laptop, it didn't find my Note 2, had to reinstall Kies and after a new reboot it finally found my phone and after that it hasn't caused any problems, it find the phone every single time when I connect it to my laptop.
Remember that you can also try right-click on the Kies icon and try run it as "Administrator" and see if that helps.
I tried to install new software with odin but my pc shut down during the process. Now the phone shows a message to recover with kies but I can`t connect with computer. When I try with odin I get a message "can not connect with stock COM port". Can someone help me to recover the phone and get it working? Thanks!
I SUCCEEDED TO FLASH PHIL`S RECOVERY AND IT`S FIXED
Hi, I recently tried using a stock image with odin for my galaxy tab pro 8.4. Odin started flashing but failed when sending system.img.
I tried this process twice and got the same result even using a different USB port in may computer and a different cable but, after the second try (and as the first one I disconnected the computer and restarted into download mode), the tablet usb stopped working.
When I connected it in my first two tries, I got the typical windows sound when you connect anything in the usb, now I dont get anything and not even in the device manager. I tried with another computer and got the same problem, no usb connected sound and nothing in device manager.
My device is now stuck in odin mode. If I try to reboot normally I get into download mode but with the message "Firmware upgrade encounterd an issue. Please select recovery mode in Kies & try again".
I have tried deleteing de drivers and installing kies but still nothing.
Can you help me please?
Nevermind
MarcoZM1978 said:
Hi, I recently tried using a stock image with odin for my galaxy tab pro 8.4. Odin started flashing but failed when sending system.img.
I tried this process twice and got the same result even using a different USB port in may computer and a different cable but, after the second try (and as the first one I disconnected the computer and restarted into download mode), the tablet usb stopped working.
When I connected it in my first two tries, I got the typical windows sound when you connect anything in the usb, now I dont get anything and not even in the device manager. I tried with another computer and got the same problem, no usb connected sound and nothing in device manager.
My device is now stuck in odin mode. If I try to reboot normally I get into download mode but with the message "Firmware upgrade encounterd an issue. Please select recovery mode in Kies & try again".
I have tried deleteing de drivers and installing kies but still nothing.
Can you help me please?
Click to expand...
Click to collapse
For anyone facing this, you have to wait for the tablet to run out of battery and then connect it again to the computer. It will be detected as before.
hey guys
i know it's late for this question but please help me
i have samsung wave and installed badadroid years ago and reset to factory settings so zimage deleted now my phone doesn't boot and can't reach recovery and when i connect it to pc can't recognize it so multiloader does not find it
is there a way to recover my phone?
can i somehow put zimage back?
You turn on the download mode, before connecting multiloader ?
Union_Jack said:
You turn on the download mode, before connecting multiloader ?
Click to expand...
Click to collapse
yes i do that but nothing happens i installed Kies and drivers but my pc does not recognize it
escexception said:
yes i do that but nothing happens i installed Kies and drivers but my pc does not recognize it
Click to expand...
Click to collapse
Try to complete the KIES processes in the task manager.
Use another cable, other USB ports, or another computer.