Related
i need your help please , I tried to apply swap partition on my device hoping would give me extra ram. with mini tools partition i used 2 gb for linux swap partition (i have 32 gb class 4 sd card ) ,downloaded and installed swapper2 , run it and checking many options according to this tuto http://forum.xda-developers.com/showthread.php?t=1659231
I turned off my phone, and when i tried to turn it on , nothing happened :crying: my phone was DEAD !!!!!!! or almost , no charging sign (pc or ac adapter),no recovery mode , no download mode, the only signe of life is the QHSUSB_DLOAD driver missin message when i connect it to pc
it seems that im not the only one having this probleme , but i cant find any solution while searching during two hard days , so please , if anyone of you can help , dont hesitate , thank you .
i will wait for your answers with impatience.
anyone can help ?
please , im waiting , anyone who had this probleme before ?
try taking a shot with another device for wt the phone shows you, make sure that ur memory card is inside ur phone before turning it on. try again to check if u can get to recovery or download modes while ur memory card is in ur phone. im a noob so i can't help much but maybe we can figure it out together
Did you tried to turn on your phone without sd card and SIM card?
mosta_9741 said:
try taking a shot with another device for wt the phone shows you, make sure that ur memory card is inside ur phone before turning it on. try again to check if u can get to recovery or download modes while ur memory card is in ur phone. im a noob so i can't help much but maybe we can figure it out together
Click to expand...
Click to collapse
thank you , ive tried a lots of manip with/without sim ; sd card ; even battery while coonecting the device ton pc , but nothing happen except , when i try to get into recovery or download mode , after about 10 seconds of pressing the bouttons , its like the phone is detected and the QHSUSB_DLOAD missing driver message appears again !! thats all
ok let's try to find the file of that driver, which rom wr u using ??
don't mean to be a bearer of bad news, but your phone is hard bricked. Meaning no software will get you out of that. The driver you mentioned is the universal, you screwed something up driver. Youll need JTAG repair
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
MiguelPT said:
Did you tried to turn on your phone without sd card and SIM card?
Click to expand...
Click to collapse
thank you , ive tried a lots of manip with/without sim ; sd card ; even battery while coonecting the device ton pc , but nothing happen except , when i try to get into recovery or download mode , after about 10 seconds of pressing the bouttons , its like the phone is detected and the QHSUSB_DLOAD missing driver message appears again !! thats all
DAMASTAH ,yes , iam aware of that but i still hope finding a software solution , thanks
mosta_9741 said:
ok let's try to find the file of that driver, which rom wr u using ??
Click to expand...
Click to collapse
i use this rom http://forum.xda-developers.com/showthread.php?t=1673875
if ur still in warranty then the easiest way is to let samsung fix it for u
My point is there there isn't a software solution . Your phone won't boot into anything. that's why software isn't a solution. You need JTag. a usb jig MAY solve it, but that's the only option short of JTag
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
mosta_9741 said:
if ur still in warranty then the easiest way is to let samsung fix it for u
Click to expand...
Click to collapse
i have not warranty because i live in TUNISIA and i bought the phone from a person who lives in europe , there is a samsung service in my country but if i take the phone to them , im sure it will cost me a fortune , so i have to find a solution by myself .
damastah said:
My point is there there isn't a software solution . Your phone won't boot into anything. that's why software isn't a solution. You need JTag. a usb jig MAY solve it, but that's the only option short of JTag
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
i see what do you mean , but if we think a little , the phone is not completly dead until my pc detect it as qhsusb-dload ! and im sure tha a software solution does exist (beside te jtag) using linux (ubuntu) ? QPST ? heimdall ?
passager2010 said:
i have not warranty because i live in TUNISIA and i bought the phone from a person who lives in europe , there is a samsung service in my country but if i take the phone to them , im sure it will cost me a fortune , so i have to find a solution by myself .
i see what do you mean , but if we think a little , the phone is not completly dead until my pc detect it as qhsusb-dload ! and im sure tha a software solution does exist (beside te jtag) using linux (ubuntu) ? QPST ? heimdall ?
Click to expand...
Click to collapse
you can try another way beside jtag without using any software..
1. pull out the battery
2. plug the charger/usb charge on pc/laptop
3. hold the vol. down-menu-power(same thing like you do to get to download menu)
4. while you hold those three buttons put the battery again (make sure that you still hold those three buttons)
5. after you put in the battery, download menu will show up (now you can use odin to install which stock rom you like)
gudluck buddy..
Sent from xda app
passager2010 said:
i have not warranty because i live in TUNISIA and i bought the phone from a person who lives in europe , there is a samsung service in my country but if i take the phone to them , im sure it will cost me a fortune , so i have to find a solution by myself .
i see what do you mean , but if we think a little , the phone is not completly dead until my pc detect it as qhsusb-dload ! and im sure tha a software solution does exist (beside te jtag) using linux (ubuntu) ? QPST ? heimdall ?
Click to expand...
Click to collapse
im in the business of unbricking phones. QPST has nothing to do with the phone's operating system. Heimdall needs your phone to be partly functional ( download mode) . Odin, same thing. Have you found any drivers yet? You need drivers to talk to your phone at all.
stpdkid said:
you can try another way beside jtag without using any software..
1. pull out the battery
2. plug the charger/usb charge on pc/laptop
3. hold the vol. down-menu-power(same thing like you do to get to download menu)
4. while you hold those three buttons put the battery again (make sure that you still hold those three buttons)
5. after you put in the battery, download menu will show up (now you can use odin to install which stock rom you like)
gudluck buddy..
Sent from xda app
Click to expand...
Click to collapse
i have seen a video on youtube explaining this manip , and i have try it with no success but , the good news , i have my phone bach to life with JTAG , thanks .
damastah said:
im in the business of unbricking phones. QPST has nothing to do with the phone's operating system. Heimdall needs your phone to be partly functional ( download mode) . Odin, same thing. Have you found any drivers yet? You need drivers to talk to your phone at all.
Click to expand...
Click to collapse
i took the phone to a phone store where they repair a multitude of phones , i found what i look for when i spook to the technicien there, after a while , i returned to the store and found my phone back to life and im very happy , so let me say this , thank you all of you xda members , if this forum does not exist , i will never figure out the solution :good:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
flash stock rom using flash tool
Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
use sp tool and flash coustom rom
raj1988 said:
use sp tool and flash coustom rom
Click to expand...
Click to collapse
Thanksfor taking time to respond.
The problem is im a little less able to be called a developer. I tried searching it but didnt got an original Rom, the one micromax uses. It would be very helpfull if u post a link. I'll manage to download sp flash tools on my own.
you get it from below link
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse
raj1988 said:
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse
try follows option
first you have done little research about the app
if you have cwm try to go to recovery and factory reset device and wipe data
but may be you didn't install than try this you say that canvas 4 logo seen hence may be you are able to get into recovey
press and hold vol up down and power keynow u see recovery mode and factory mode
press vol up key for go to recovery mode now see like this
use only vol up for scrolling and go to recovery mode then press vol downnow u see wipe reset menu hare
go to wipe/reset with vol key's5.to select use options keynow reset finish...............
try it and work for you than tell me
Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
Open your device manager on your pc then plug the phone via USB. After a second or two I new device will pop up on the device manager but will only stay there for a few seconds, right when it appears right click on it and choose properties then drivers, then update driver then (at least on Windows 7) choose browse my computer and use wherever you put the driver files. That will install the driver.
Once the drivers are installed unplug the phone and open the Flash tool on the pc. Click scatter loading. And direct it to the Scatter file of the Rom. Then click download. now plug the phone back in and it should just flash it. When you get the green circle it's done.
---------- Post added at 01:09 PM ---------- Previous post was at 01:04 PM ----------
And no, it's not bricked. Mine did the same thing trying to use Chainfire 3D. If you follow the directions it will work. Oh yeah, the first time you turn it on it may not boot. Just hold the power button and restart again and once the boot screens come up you will see the android is updating apps and it will boot.
help I need help
hi everybody
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery
please help.....
will be great full ( have canvas 4 stock rom downloaded)........?
Great news
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE
Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........
Shikhar122 said:
Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........
Click to expand...
Click to collapse
why not just flash the stock ROM using Sp flash tool
---------- Post added at 05:41 PM ---------- Previous post was at 05:34 PM ----------
Ronald Stefinson said:
raj1988 said:
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse
manually install MTK65xx VCOM driver. see the video tutorial below for a guide
Click to expand...
Click to collapse
boot loop and no recovery Canvas a310 nitro (no forum for nitro)
I have rooted my Micromax Canvas Nitro A310 using Kingoroot and installed TWRP recovery before. Also I had installed a Custom ROM of Coolpad F1 from needrom<dot>com. There wasnt any problem till now except the auto rotation. Today i formated my sd card and switched off my phone and on reboot it came to boot loop. It is not booting the ROM and also the TWRP recovery. Shows only the first screen and goes off and on to the screen again. As it does not boot to recovery for me to wipe cache and dalvik, I tried to install drivers again to flash recovery using fastboot, but as its on a boot loop problem and its not standing by for me to install drivers, I am totally stuck. Please help me ASAP.
Sorry for the bad English.
Thank you
jjwaiting4u said:
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE
Click to expand...
Click to collapse
I need a jtag centre to unbrick my Moto e. My location patna
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
can you at least turn on the phone? if not nothing can do other than going to the service center. but since your phone is rooted ,your warranty is already voided so you might have to pay for repairing.
sunny8p said:
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
Click to expand...
Click to collapse
you don't have to go to download mode to restore stock using sp flash tool right? I've done it without even turning on the phone. I think that's how you supposed to restore. Try like this: http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool if that doesn't work, you probably have to go to a service center.
Dhamithl said:
you don't have to go to download mode to restore stock using sp flash tool right? I've done it without even turning on the phone. I think that's how you supposed to restore. Try like this: http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool if that doesn't work, you probably have to go to a service center.
Click to expand...
Click to collapse
he said
"not detected by pc,"
so I don't think it would work if the phone isn't detected properly.
StormyKnight;5 9 31 47 26 said:
can you at least turn on the phone? if not nothing can do other than going to the service center. but since your phone is rooted ,your warranty is already voided so you might have to pay for repairing.
Click to expand...
Click to collapse
Can't turn on phone
Not detected by pc
Can the service center guys still detect that its rooted?
sunny8p said:
Can't turn on phone
Not detected by pc
Can the service center guys still detect that its rooted?
Click to expand...
Click to collapse
probably yes because when you rooted the phone the super user binary goes to /system/bin or /system/xbin folder
and it won't be deleted unless the phone is updated. so the best way is find someone who repairs the phone with jtag and then you can still keep your warranty.
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Can you help me out?
Can you help me out by telling me the procedure of how you did you turn your phone into life? Because I've same issue with my phone just like yours. So I need your help to turn my phone back into life. :crying:
sunny8p said:
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Click to expand...
Click to collapse
Will the latest version of Sp TOOL help in detecting my phone?
Just remove the battery and try to flash the stock rom through sptools
sunny8p said:
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Click to expand...
Click to collapse
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
sunny8p said:
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
Click to expand...
Click to collapse
install android one toolkit on your pc. then from there flash a custom recovery to your phone using adb. now download a stock rom and place it in your sd card. then flash the custom rom from custom recovery. i hope it will work.
---------- Post added at 01:58 PM ---------- Previous post was at 01:55 PM ----------
konankiakshay said:
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
Click to expand...
Click to collapse
install android one toolkit on your pc. then from there flash a custom recovery to your phone. now download a stock rom and place it in your sd card. then flash the rom from custom recovery. i hope it will work.
konankiakshay said:
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
Click to expand...
Click to collapse
I am in the same situation of connection and disconnection of my bricked mmx a26 to pc, have you found a way to get out of this? If yes pls. provide to help me
Bricked & USB not recognized
My micromax canvas a1 is bricked and tried flask it using sp flash 5.14 but the phone is not recognised in the flash
I have Canvas A1, it gets detected and SP starts flashing and completes it. Shows Green tick (ok) but the phone doesn't boot up. How the phone got bricked? Well one of my idiot friend tried flashing with SP flash tool, don't know what he did but after that my phone never booted up. The service centre told they don't have motherboard for the device available. Is there any way to fix it. Can someone please list down all the drivers that are needed, the ROM that has to be flashed and all the steps to take to fix the device. It would be really helpful for everyone who have their device bricked.
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Haven't really got much to say in the way of helping you mate, sounds like you're in a real Pickle :/
I'm sure someone here has a solution, there'd surely be SOME way to resolve it, we've got some pretty talented devs that do some amazing stuff so someone should be able to help ya somewhere.
All the best man, if you need help we're here
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Are you sure you have no recovery access by Power+Vol—
jac10000 said:
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Click to expand...
Click to collapse
I will try as soon as possible and let you know if anything happens!
itsbighead said:
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Click to expand...
Click to collapse
I will keep that in mind as well thank you!
jac10000 said:
Are you sure you have no recovery access by Power+Vol—
Click to expand...
Click to collapse
Yes im sure! my phone is completely dead and the only sign of life as i said is when the driver gets installed on the computer when i plug it in.. Thank you for your reply though.
Try LG mobile support tool (old version) : http://tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe
Even if you have not download mode, you can try. Install the tool
Try to boot on download mode, you have error message
run LG mobile support tool
choose Additional functions then Upgrade of the recovery after error
At one moment the tool will say that there is not of g3 connected, reattempts starting in download mode or presses on the button to power. Try several times both.
If it work, the software is going to download the last one kdz available for your device and him(it) to fall in love by following
You can always try this solution, with a little luck ...
I have tried all your suggestions but i still have no luck..i tried the tot method as well and it comes up with an error message of 'download fails'..there must be some way to fix this!!im left with the driver AndroidNet being installed on the computer and a phone that cannot enter recovery or download mode. however i can hear the phone working on the inside if i listen closely..if you have any other suggestions please share!
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
HELP
PeterGeorgiou said:
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
Click to expand...
Click to collapse
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
li545044579 said:
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
Click to expand...
Click to collapse
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
PeterGeorgiou said:
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Click to expand...
Click to collapse
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Same Problem
PeterGeorgiou said:
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
Click to expand...
Click to collapse
Hi friend, yeah, that was low battery screen pop out. Doesn't help after you charge you phone. And also, i getting theLGE AndroidNet USB driver just like you. i still keep searching up for solution. Hope it can fix it as soon as possible. I am so thankful for your suggestion. Thank you
573v3 said:
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Click to expand...
Click to collapse
thank you for your post but the link is dead..also my phone cannot be recognized in order to use fasttboot. :/
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
li545044579 said:
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
Click to expand...
Click to collapse
Nothing yet..im still searching and trying every possible method there is but no luck
PeterGeorgiou said:
Nothing yet..im still searching and trying every possible method there is but no luck
Click to expand...
Click to collapse
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Don't get it with >>>>Open terminal in ubuntu then type: do i open terminal in computer or in the phone. If open in the phone, its impossible because the problem we had right now is when we connect the phone with PC, the only thing show up on computer is LGE AndroidNet USB Serial Port. but our phone screen still off even the system is boot in.
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
PeterGeorgiou said:
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
Click to expand...
Click to collapse
Here the same method on Windows : http://forum.xda-developers.com/lg-g2/general/choise-unbrick-qhsusbbulk-qualcomm-9006-t3093844
Yes if you can establish a connection between the phone with the Terminal (linux) or AOMEI Partition Assistant (windows) , you can flash the partitions (aboot, boot, laf) to have after download mode and then apply a kdz
other method ... http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
and can be ... : http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Dear all. I have a note II that has gone wild. The phone was working fine but then I received a note 4 and put the note 2 aside. Then I was trying to install root and was able to do so by installing TWRP V2.8.3 and everything went smooth and the phone was rooted. I then used the phone for a while but switched to the note 4 after. Now, 5 months after, I wanted to check something on my olde note II. I charged the phone and switched it on but it was stuck on the Galaxy note II screen I rebooted then rebooted but still the same. I went in the TWRP recovery to try to do something but I was not able to because it says that it cant mount storage, cant mount efs, cant mount data, cant mount cache and cant mount system.
Then I have decided to install the firmware image from zipped file but that did not work as it sees that the internal and external storags are 0 and cant mount them.
Then I opted to try and install the firmware PDA through Odin but that also did not work as Odin was not able to detect the phone. Now I'm clueless and not sure what to do the only thing I'm able to do is boot in TWRP recovery and that is all. Can any one help.
My phone had the latest official rom from samsung the 4.4.2
Please help
classic, just search. there is a thread with tutorial how to get your n2 back to life. you could also have sds, but try different odin and flash with pit
Ok now I'm in a worse situation. I have managed to get to the download mode and connected it to ODIN and tried to flash with the stock rom but at the end of the writing process it failed and started to get a message on the phone to connect my device to kies and try again. I tried that but did not do anything. Then I tried Odin again but this time I unticked the auto reboot. then clicked start. The same thing happened as before and writing failed now though my phone is blank it does not show anything and it does not want to turn on and no LED that is turning on nor the charging icon. I searched the net and someone suggested that the battery is damaged. I replaced the battery but still no go. Please I really need to get that phone back alive. I think I bricked it. any ideas or directions to help me with this annoying case. I cant even boot to recovery nor download please help
No one can help
sambosat said:
No one can help
Click to expand...
Click to collapse
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
sambosat said:
No one can help
Click to expand...
Click to collapse
sambosat said:
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
Click to expand...
Click to collapse
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Christopher11 said:
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Click to expand...
Click to collapse
As I said when I remove the battery and insert it back the phone remains blank no response to any button pressed.
What I did is that my phone was stuck on opening screen samsung screen. Then someone suggested to flash it with the stock rom. So I went to Sammobile site and downloaded the latest firmware. I tried to install it to my phone using ODIN and just before the end. ODIN failed. I tried it the second time and the same happened. then the third time I read that I have to untick auto reboot. I did and tried ODIN for the 3rd time and on the third trial I got the same fail message and then I wanted to boot into download mode for the forth time but this time the phone went dead and not responding to any button press. I hope that this explains the situation
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Christopher11 said:
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Click to expand...
Click to collapse
No worries bro. At least you are trying. I have never seen this before either and I'm stumped and where I'm I dont think I can find any samsung pro shop. All what they are going to say is the motherboard is dead and you need to change it. I do have another phone but I hate it when a devise does this to me