Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
can you at least turn on the phone? if not nothing can do other than going to the service center. but since your phone is rooted ,your warranty is already voided so you might have to pay for repairing.
sunny8p said:
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
Click to expand...
Click to collapse
you don't have to go to download mode to restore stock using sp flash tool right? I've done it without even turning on the phone. I think that's how you supposed to restore. Try like this: http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool if that doesn't work, you probably have to go to a service center.
Dhamithl said:
you don't have to go to download mode to restore stock using sp flash tool right? I've done it without even turning on the phone. I think that's how you supposed to restore. Try like this: http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool if that doesn't work, you probably have to go to a service center.
Click to expand...
Click to collapse
he said
"not detected by pc,"
so I don't think it would work if the phone isn't detected properly.
StormyKnight;5 9 31 47 26 said:
can you at least turn on the phone? if not nothing can do other than going to the service center. but since your phone is rooted ,your warranty is already voided so you might have to pay for repairing.
Click to expand...
Click to collapse
Can't turn on phone
Not detected by pc
Can the service center guys still detect that its rooted?
sunny8p said:
Can't turn on phone
Not detected by pc
Can the service center guys still detect that its rooted?
Click to expand...
Click to collapse
probably yes because when you rooted the phone the super user binary goes to /system/bin or /system/xbin folder
and it won't be deleted unless the phone is updated. so the best way is find someone who repairs the phone with jtag and then you can still keep your warranty.
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Can you help me out?
Can you help me out by telling me the procedure of how you did you turn your phone into life? Because I've same issue with my phone just like yours. So I need your help to turn my phone back into life. :crying:
sunny8p said:
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Click to expand...
Click to collapse
Will the latest version of Sp TOOL help in detecting my phone?
Just remove the battery and try to flash the stock rom through sptools
sunny8p said:
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Click to expand...
Click to collapse
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
sunny8p said:
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
Click to expand...
Click to collapse
install android one toolkit on your pc. then from there flash a custom recovery to your phone using adb. now download a stock rom and place it in your sd card. then flash the custom rom from custom recovery. i hope it will work.
---------- Post added at 01:58 PM ---------- Previous post was at 01:55 PM ----------
konankiakshay said:
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
Click to expand...
Click to collapse
install android one toolkit on your pc. then from there flash a custom recovery to your phone. now download a stock rom and place it in your sd card. then flash the rom from custom recovery. i hope it will work.
konankiakshay said:
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
Click to expand...
Click to collapse
I am in the same situation of connection and disconnection of my bricked mmx a26 to pc, have you found a way to get out of this? If yes pls. provide to help me
Bricked & USB not recognized
My micromax canvas a1 is bricked and tried flask it using sp flash 5.14 but the phone is not recognised in the flash
I have Canvas A1, it gets detected and SP starts flashing and completes it. Shows Green tick (ok) but the phone doesn't boot up. How the phone got bricked? Well one of my idiot friend tried flashing with SP flash tool, don't know what he did but after that my phone never booted up. The service centre told they don't have motherboard for the device available. Is there any way to fix it. Can someone please list down all the drivers that are needed, the ROM that has to be flashed and all the steps to take to fix the device. It would be really helpful for everyone who have their device bricked.
Related
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
flash stock rom using flash tool
Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
use sp tool and flash coustom rom
raj1988 said:
use sp tool and flash coustom rom
Click to expand...
Click to collapse
Thanksfor taking time to respond.
The problem is im a little less able to be called a developer. I tried searching it but didnt got an original Rom, the one micromax uses. It would be very helpfull if u post a link. I'll manage to download sp flash tools on my own.
you get it from below link
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse
raj1988 said:
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse
try follows option
first you have done little research about the app
if you have cwm try to go to recovery and factory reset device and wipe data
but may be you didn't install than try this you say that canvas 4 logo seen hence may be you are able to get into recovey
press and hold vol up down and power keynow u see recovery mode and factory mode
press vol up key for go to recovery mode now see like this
use only vol up for scrolling and go to recovery mode then press vol downnow u see wipe reset menu hare
go to wipe/reset with vol key's5.to select use options keynow reset finish...............
try it and work for you than tell me
Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
Open your device manager on your pc then plug the phone via USB. After a second or two I new device will pop up on the device manager but will only stay there for a few seconds, right when it appears right click on it and choose properties then drivers, then update driver then (at least on Windows 7) choose browse my computer and use wherever you put the driver files. That will install the driver.
Once the drivers are installed unplug the phone and open the Flash tool on the pc. Click scatter loading. And direct it to the Scatter file of the Rom. Then click download. now plug the phone back in and it should just flash it. When you get the green circle it's done.
---------- Post added at 01:09 PM ---------- Previous post was at 01:04 PM ----------
And no, it's not bricked. Mine did the same thing trying to use Chainfire 3D. If you follow the directions it will work. Oh yeah, the first time you turn it on it may not boot. Just hold the power button and restart again and once the boot screens come up you will see the android is updating apps and it will boot.
help I need help
hi everybody
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery
please help.....
will be great full ( have canvas 4 stock rom downloaded)........?
Great news
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE
Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........
Shikhar122 said:
Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........
Click to expand...
Click to collapse
why not just flash the stock ROM using Sp flash tool
---------- Post added at 05:41 PM ---------- Previous post was at 05:34 PM ----------
Ronald Stefinson said:
raj1988 said:
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse
manually install MTK65xx VCOM driver. see the video tutorial below for a guide
Click to expand...
Click to collapse
boot loop and no recovery Canvas a310 nitro (no forum for nitro)
I have rooted my Micromax Canvas Nitro A310 using Kingoroot and installed TWRP recovery before. Also I had installed a Custom ROM of Coolpad F1 from needrom<dot>com. There wasnt any problem till now except the auto rotation. Today i formated my sd card and switched off my phone and on reboot it came to boot loop. It is not booting the ROM and also the TWRP recovery. Shows only the first screen and goes off and on to the screen again. As it does not boot to recovery for me to wipe cache and dalvik, I tried to install drivers again to flash recovery using fastboot, but as its on a boot loop problem and its not standing by for me to install drivers, I am totally stuck. Please help me ASAP.
Sorry for the bad English.
Thank you
jjwaiting4u said:
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE
Click to expand...
Click to collapse
I need a jtag centre to unbrick my Moto e. My location patna
Hi all
I got a notification of the latest software upgrade available for my device. I downloaded it and installed it. The installation process was shown to have reached 100% and then the phone screen went black and then did not turn back up. When I connect the phone to charger, I do not see any battery charging icon
I had my phone connected to the power outlet while I was upgrading? Is my phone bricked? Any way I can resolve this issue? My phone is out of warranty.
I have never ever rooted the phone. Not sure why would this happen with an official software upgrade.
Any help will be immensely appreciated
Are u able to enter recovery mode!
nick2408 said:
Hi all
I got a notification of the latest software upgrade available for my device. I downloaded it and installed it. The installation process was shown to have reached 100% and then the phone screen went black and then did not turn back up. When I connect the phone to charger, I do not see any battery charging icon
I had my phone connected to the power outlet while I was upgrading? Is my phone bricked? Any way I can resolve this issue? My phone is out of warranty.
I have never ever rooted the phone. Not sure why would this happen with an official software upgrade.
Any help will be immensely appreciated
Click to expand...
Click to collapse
Bro, hava read here....hopefully this will fix for u, FULL UNBRICKING TUT
http://forum.xda-developers.com/showthread.php?t=2725706
bodmar said:
Bro, hava read here....hopefully this will fix for u, FULL UNBRICKING TUT
http://forum.xda-developers.com/showthread.php?t=2725706
Click to expand...
Click to collapse
I was unable to go to recovery or download mode..
I took my phone to samsung service center and they told my motherboard has problems and it needs to be replaced.. huh
nick2408 said:
I was unable to go to recovery or download mode..
I took my phone to samsung service center and they told my motherboard has problems and it needs to be replaced.. huh
Click to expand...
Click to collapse
So its under warranty? Right? Or do u have to pay for the mess samsung created
doctor_droid said:
So its under warranty? Right? Or do u have to pay for the mess samsung created
Click to expand...
Click to collapse
I had to pay for it. It was out of warranty
nick2408 said:
I had to pay for it. It was out of warranty
Click to expand...
Click to collapse
Thats a really bad consumer behavior from an intl oem...
doctor_droid said:
Thats a really bad consumer behavior from an intl oem...
Click to expand...
Click to collapse
Why do you think so. I am quite sure my phone was hard bricked
nick2408 said:
Why do you think so. I am quite sure my phone was hard bricked
Click to expand...
Click to collapse
I meant behavior towards consumer... not ur fault mate...i knw how pathetic it can be to give away hard earned money when its nt our fault
Ridiculous move from Samsung IMO.
nick2408 said:
Hi all
I got a notification of the latest software upgrade available for my device. I downloaded it and installed it. The installation process was shown to have reached 100% and then the phone screen went black and then did not turn back up. When I connect the phone to charger, I do not see any battery charging icon
I had my phone connected to the power outlet while I was upgrading? Is my phone bricked? Any way I can resolve this issue? My phone is out of warranty.
I have never ever rooted the phone. Not sure why would this happen with an official software upgrade.
Any help will be immensely appreciated
Click to expand...
Click to collapse
Dear friend, Did you repair your phone my case is similar to yours.
agsao said:
Dear friend, Did you repair your phone my case is similar to yours.
Click to expand...
Click to collapse
Dear friend, just download your latest firmware at sammobile and flash it thru odin. Its the easiest and safest way to upgrade in my experience.
kaiserlourdes said:
Dear friend, just download your latest firmware at sammobile and flash it thru odin. Its the easiest and safest way to upgrade in my experience.
Click to expand...
Click to collapse
I could not open my phone and PC recognized it as unknown device.
agsao said:
I could not open my phone and PC recognized it as unknown device.
Click to expand...
Click to collapse
Search the forum on how to root and u can find there the Samsung USB drivers link. Download that
kaiserlourdes said:
Search the forum on how to root and u can find there the Samsung USB drivers link. Download that
Click to expand...
Click to collapse
Previously the PC was able to detect the phone (that mean the driver is installed successfully) but after this problem I can't turn on my phone ,and the screen is always blank.
agsao said:
Previously the PC was able to detect the phone (that mean the driver is installed successfully) but after this problem I can't turn on my phone ,and the screen is always blank.
Click to expand...
Click to collapse
can u explain how did you end up with blank screen when plug into PC?
did u go to download mode?
because mine was perfectly fine when plug into the PC.
kaiserlourdes said:
can u explain how did you end up with blank screen when plug into PC?
did u go to download mode?
because mine was perfectly fine when plug into the PC.
Click to expand...
Click to collapse
Dear friend,
My phone was stuck on logo screen.
I tried to full flash it using Odin I chooses all files except PDA files.
The phone accepted the flashing successfully
Phone restated and showing the android robot for updating
During this screen became black.
The result:
No response from phone it cann' be charged nor be turned on
I can't open the phone in any mode even download mode
When I plug my phone to the PC it's recognized as unknown device not as previous.
Thanks
agsao said:
Dear friend,
My phone was stuck on logo screen.
I tried to full flash it using Odin I chooses all files except PDA files.
The phone accepted the flashing successfully
Phone restated and showing the android robot for updating
During this screen became black.
The result:
No response from phone it cann' be charged nor be turned on
I can't open the phone in any mode even download mode
When I plug my phone to the PC it's recognized as unknown device not as previous.
Thanks
Click to expand...
Click to collapse
After successful flash the phone will reboot automatically and will stay on bootloop, while rebooting press and hols home+vol.up+power button. Then factory reset, wipe dalvik, wipe cache. Then reboot system..
Why not PDA? When i flashed stock rom i choose PDA and choose the file.
Auto reboot and f.reset time are the only checked boxes
kaiserlourdes said:
After successful flash the phone will reboot automatically and will stay on bootloop, while rebooting press and hols home+vol.up+power button. Then factory reset, wipe dalvik, wipe cache. Then reboot system..
Why not PDA? When i flashed stock rom i choose PDA and choose the file.
Auto reboot and f.reset time are the only checked boxes
Click to expand...
Click to collapse
Now I cannot flash it any more because the phone can't start in any mode neither download download mode nor recovery mode. ( may be hard bricked)
agsao said:
Now I cannot flash it any more because the phone can't start in any mode neither download download mode nor recovery mode. ( may be hard bricked)
Click to expand...
Click to collapse
one cannot hard bricked thru OTA update of official samsung. because i once update thru OTA and it updated successfully.
maybe it hard bricked when you flashed thru odin, maybe a wrong step.
i cant help you anymore brother, you can search this forum on how to unbricked device, u can try it. goodluck!
please someone help me out from this serious issue. i cannot turn on my xperia m c1904 running on 4.3 andriod bootloader unlocked .while flashing the boot.img file of cyanogen mod using flashtool ,the process was successful on fashtool and gave the command as unplug the device then after that my device is not turning on and not even showing sony logo neither it is charging .i tried to connect it to my windows pc in fastboot mode it is also not working .please give the state of my mobile and assist me in getting back my mobile bacvk to its condition.thanks in advance:good:
Sir,
Please wait until mods will move this thread to the device specific forum.
Stand by
Good luck
Moved!
It think your motherboard is destroyed. Its best to bring it to a nearby service center, sorry bud
It only takes 2 taps to thank somebody here.
saikishore said:
please someone help me out from this serious issue. i cannot turn on my xperia m c1904 running on 4.3 andriod bootloader unlocked .while flashing the boot.img file of cyanogen mod using flashtool ,the process was successful on fashtool and gave the command as unplug the device then after that my device is not turning on and not even showing sony logo neither it is charging .i tried to connect it to my windows pc in fastboot mode it is also not working .please give the state of my mobile and assist me in getting back my mobile bacvk to its condition.thanks in advance:good:
Click to expand...
Click to collapse
i had same problem a few days ago, try to remove your battery, cards, and everything is attached to your phone, wait for a while, 5 min or so, then put it all together again, see if it can enter fastboot mode, thenflash boot.img from archidroid using cmd prompt. and flash the rom. Tell me if it works
RedLedLight said:
It think your motherboard is destroyed. Its best to bring it to a nearby service center, sorry bud
It only takes 2 taps to thank somebody here.
Click to expand...
Click to collapse
thnaks for replying .can u say how much it costs to repair my mobile and make it back to original state
saikishore said:
thnaks for replying .can u say how much it costs to repair my mobile and make it back to original state
Click to expand...
Click to collapse
I am in no means an expert in this but I think 30-70€.
It only takes 2 taps to thank somebody here.
Guys my phone isn't working now so I went to the service center.They said to replace the motherboard which will be costing around 2000-3000. And I m not gonna do it,
So its better to scrap it. If anyone needs it let me know .
Thanks
what u did exactly ... with ur phone
a new android one, same model is available at 3000. You can either save up or buy a refurbished phone I suppose
Sold.
guys I sold the dead phone in Olx for 700 rupees..
just bought a new one Xiaomi Redmi2 prime
great but I am eager to know what happened with your phone
Ohk so it all started last month when i started noticing that few apps began to stop working n i kept getting messages "unfortunately #### has stopped working "
So i went to recovery. Mode did a system restore .n the problem became much worse..now the system.apk stopped. So i went to the service center they flashed it n it seemed to work normally..atleast fr somedays..
Now again the same problem started.. But when i did a restore from recovery mode. The phone didn't boot up it was stuck in the manufacturers logo. I went to the service center thy tried software flashing but it didnt work. They said the phones motherboard is dead .
M very happy with my Xiaomi Now..
The service center was a money sucker... And you were a bit stupid bro *kidding**no offense*.. 890mb download and 10 mins could gave ur Android one a new life... The fresh one.
Tathyajit said:
The service center was a money sucker... And you were a bit stupid bro *kidding**no offense*.. 890mb download and 10 mins could gave ur Android one a new life... The fresh one.
Click to expand...
Click to collapse
Bro can you give me that 890mb file links my phone is also dead..need you hel in this...thanx
Yes i can
---------- Post added at 02:20 AM ---------- Previous post was at 02:12 AM ----------
Bigg_Boss said:
Bro can you give me that 890mb file links my phone is also dead..need you hel in this...thanx
Click to expand...
Click to collapse
Bro you will be back to kitkat or lolipop stock rom if u wanna go back to kitkat then plz download kitkat flash file from http://www.mediafire.com/download/vgcbhv4vcy4ps22/AQ4501_FlashFile_Mirror.zip or of u wanna go back to lolipop then download lolipop flash file http://www.mediafire.com/download/wg6p42scc114ep5/AQ4501+L+Official+Update.zip ***i used kitkat flash file, didn't use lolipop flash file... Now download drivers from http://www.mediafire.com/download/442x2y4c14qu5r0/AQ4501_USBdriver.zip ... now download sp flash tool from http://www.mediafire.com/download/s...Tool_SP_Flash_Tool_exe_windows_v5.1424.00.zip
---------- Post added at 02:25 AM ---------- Previous post was at 02:20 AM ----------
Bigg_Boss said:
Bro can you give me that 890mb file links my phone is also dead..need you hel in this...thanx
Click to expand...
Click to collapse
Should i help you with the process?
hard bricked canvas A1
i bricked my phone while flashing a new rom using sp flash tools and now its not powering on nor going into recovery mode and the good thing is that the phone's preloader is working but sp flash tool is not working its hard bricked.
what should i do?
anubhavrj2 said:
i bricked my phone while flashing a new rom using sp flash tools and now its not powering on nor going into recovery mode and the good thing is that the phone's preloader is working but sp flash tool is not working its hard bricked.
what should i do?
Click to expand...
Click to collapse
Bro, what do u mean by sp flash tool isnt working? U tried it?
Tathyajit said:
Bro, what do u mean by sp flash tool isnt working? U tried it?
Click to expand...
Click to collapse
my phone is not being detected by the sp flash tool , it gets detected for a few seconds then again the connection is lost.
anubhavrj2 said:
my phone is not being detected by the sp flash tool , it gets detected for a few seconds then again the connection is lost.
Click to expand...
Click to collapse
Mmmmm... I would like to suggest you to click on download then connect your phone
Tathyajit said:
Mmmmm... I would like to suggest you to click on download then connect your phone
Click to expand...
Click to collapse
i tried everything but it doesn't work!
anubhavrj2 said:
i tried everything but it doesn't work!
Click to expand...
Click to collapse
Can you collect another same phone.?? I mean aq4501
Tathyajit said:
Can you collect another same phone.?? I mean aq4501
Click to expand...
Click to collapse
yeah i can
anubhavrj2 said:
yeah i can
Click to expand...
Click to collapse
Then i can fix ur phone.. For steps whatsapp me in 8759164468 bro
Bhai I want this
MMx aq4501 bricked deleted preloader
i done all things for flashing. nothing is going to work. sp tool not detecting adb drivers not detecting. MMX service centre said you have to replace board worth Rs.2500... what should i do. plz help.
lets try
alizohair said:
Guys my phone isn't working now so I went to the service center.They said to replace the motherboard which will be costing around 2000-3000. And I m not gonna do it,
So its better to scrap it. If anyone needs it let me know .
Thanks
Click to expand...
Click to collapse
tell us what exactly happened to your mobile. Lets see if we can help you out in any possible way
Hello. I was recently trying to install a custom rom on my Lenovo vibe p1. First I tried to root the device and did is successfully. Then I tried to flash the custom Rom but couldn't do even after several attempts. Then I tried to install my ota update to 6.0 but every time my phone restarted it have an error saying I need to access through fastboot. but then I decided to unroot the device and I also did that successfully. But then an issue happened as my phone turned black. It's not powering on only Blue led light is showing continuously. I've tried pressing the volume keys and power button simultaneously but the phone is not switching on. Then I tried to use qfil tool and whenever I try to connect my phone to the computer it is showing multiple disks (f, g, h, k, j) and it is asking to format it. I'm not able to find my phone in the device manager but all these disks are showing.
Please suggest what can I do. I'll be grateful to you. Thank u
David95120 said:
Hello. I was recently trying to install a custom rom on my Lenovo vibe p1. First I tried to root the device and did is successfully. Then I tried to flash the custom Rom but couldn't do even after several attempts. Then I tried to install my ota update to 6.0 but every time my phone restarted it have an error saying I need to access through fastboot. but then I decided to unroot the device and I also did that successfully. But then an issue happened as my phone turned black. It's not powering on only Blue led light is showing continuously. I've tried pressing the volume keys and power button simultaneously but the phone is not switching on. Then I tried to use qfil tool and whenever I try to connect my phone to the computer it is showing multiple disks (f, g, h, k, j) and it is asking to format it. I'm not able to find my phone in the device manager but all these disks are showing.
Please suggest what can I do. I'll be grateful to you. Thank u
Click to expand...
Click to collapse
download mini partition tool, then format your device to ext4 primary disk and dont give label name.
then apply the settings and reconnect your phone.
Then press thanks for me.
Starchm said:
download mini partition tool, then format your device to ext4 primary disk and dont give label name.
then apply the settings and reconnect your phone.
Then press thanks for me.
Click to expand...
Click to collapse
I tried what you said but it didn't work. Now my phone is not showing the led light, still not powering on and when I'm connenting it to the computer a sound comes that the phone gets connected to the computer but I can't see any new drive. Please help.
Latest update is that I tried the qfil and the phone started but it is stuck in recovery mode. Tired everything. It's still stuck. Please suggest
David95120 said:
Latest update is that I tried the qfil and the phone started but it is stuck in recovery mode. Tired everything. It's still stuck. Please suggest
Click to expand...
Click to collapse
Download s288 rom and flash via qfil
Starchm said:
Download s288 rom and flash via qfil
Click to expand...
Click to collapse
Hi.. so I did what you told me to do and voila, the phone is now functional. Thank you very much for all your help. I appreciate it.
David95120 said:
Hi.. so I did what you told me to do and voila, the phone is now functional. Thank you very much for all your help. I appreciate it.
Click to expand...
Click to collapse
Hit thanks please.
Hit thanks... But one more often.. The phone is running smoothly but my sim card is not being detected. Any suggestion??? The error message is Sim Card Not Ready
Please suggest.. Asap
David95120 said:
Please suggest.. Asap
Click to expand...
Click to collapse
U have imei and baseband in setting about phone? if not then it is the problem, u have to get a qcn backup from someone, and restore it, then edit the imei and sn to your official. / no i cant make backup /
Starchm said:
U have imei and baseband in setting about phone? if not then it is the problem, u have to get a qcn backup from someone, and restore it, then edit the imei and sn to your official. / no i cant make backup /
Click to expand...
Click to collapse
i found a qcn backup from gsmdevelopers... can you please suggest the steps to use this.... i do not have the necessary knowledge.. Would really appreciate it
David95120 said:
i found a qcn backup from gsmdevelopers... can you please suggest the steps to use this.... i do not have the necessary knowledge.. Would really appreciate it
Click to expand...
Click to collapse
Root your rom then connect your phone to pc via usb, then select phone to diagnostic mode. Then open qfil on pc select tool and qcn backup, select your file then restore it.
Starchm said:
Root your rom then connect your phone to pc via usb, then select phone to diagnostic mode. Then open qfil on pc select tool and qcn backup, select your file then restore it.
Click to expand...
Click to collapse
Hello, i tried the whole day to root my phone.. I tried various methods including Kingroot but nothing happened... I know im taking ur time but can u please help me with rooting the phone.... plz can u tell me what app do i need and the step by step method of rooting the device. thanks in advance.
the rom im using is P1a42_S288_160721_ROW_RAW_QFIL
David95120 said:
Hello, i tried the whole day to root my phone.. I tried various methods including Kingroot but nothing happened... I know im taking ur time but can u please help me with rooting the phone.... plz can u tell me what app do i need and the step by step method of rooting the device. thanks in advance.
the rom im using is P1a42_S288_160721_ROW_RAW_QFIL
Click to expand...
Click to collapse
Go and read the guides section, there u will find my guide.
Starchm said:
download mini partition tool, then format your device to ext4 primary disk and dont give label name.
then apply the settings and reconnect your phone.
Then press thanks for me.
Click to expand...
Click to collapse
I read ur guide.. But the rom that u provided included twrp and super su needed to be installed through that... But whenever I tried to install that rom I received errors stating the nfc had stopped, notification has stopped etc... Can u please suggest what else can I do.. Below is the link I referred to
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
PLEASE HELP ME
David95120 said:
I read ur guide.. But the rom that u provided included twrp and super su needed to be installed through that... But whenever I tried to install that rom I received errors stating the nfc had stopped, notification has stopped etc... Can u please suggest what else can I do.. Below is the link I referred to
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
PLEASE HELP ME
Click to expand...
Click to collapse
Why u flash rom? U have to flasg on twrp with qfil..
Where is the twrp file?? Isn't it embedded in the rom? also if u are saying that i only need to select build (content xml) then it is not working. as the download button is not functional then.
Please suggest
Hi bro, I haven't heard from you. So the latest news is that I rooted my phone, then flashed the qcn file but still I'm not able to get the network. I've gotten my old imei back but the SN number is different.
Can you please suggest how can I get the network back and the SN number too. Please note I'm using an Airtel 4g sim
David95120 said:
Hi bro, I haven't heard from you. So the latest news is that I rooted my phone, then flashed the qcn file but still I'm not able to get the network. I've gotten my old imei back but the SN number is different.
Can you please suggest how can I get the network back and the SN number too. Please note I'm using an Airtel 4g sim
Click to expand...
Click to collapse
Do u have baseband in settings? The S/n number is notobery cares about it. Im not using airtel 4g so cant say anything specific for that.
Yes I have baseband in settings.... It is " MPSS.DPM.2.0.2.c1-00131 " In lock screen I'm seeing the message " No Sim card "
So what do u suggest??