Develop Bugs

[Q] Is my Smartphone Canvas 4 Bricked?

I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?

flash stock rom using flash tool
Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
use sp tool and flash coustom rom

raj1988 said:
use sp tool and flash coustom rom
Click to expand...
Click to collapse
Thanksfor taking time to respond.
The problem is im a little less able to be called a developer. I tried searching it but didnt got an original Rom, the one micromax uses. It would be very helpfull if u post a link. I'll manage to download sp flash tools on my own.

you get it from below link
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse

raj1988 said:
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse

try follows option
first you have done little research about the app
if you have cwm try to go to recovery and factory reset device and wipe data
but may be you didn't install than try this you say that canvas 4 logo seen hence may be you are able to get into recovey
press and hold vol up down and power keynow u see recovery mode and factory mode
press vol up key for go to recovery mode now see like this
use only vol up for scrolling and go to recovery mode then press vol downnow u see wipe reset menu hare
go to wipe/reset with vol key's5.to select use options keynow reset finish...............
try it and work for you than tell me

Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
Open your device manager on your pc then plug the phone via USB. After a second or two I new device will pop up on the device manager but will only stay there for a few seconds, right when it appears right click on it and choose properties then drivers, then update driver then (at least on Windows 7) choose browse my computer and use wherever you put the driver files. That will install the driver.
Once the drivers are installed unplug the phone and open the Flash tool on the pc. Click scatter loading. And direct it to the Scatter file of the Rom. Then click download. now plug the phone back in and it should just flash it. When you get the green circle it's done.
---------- Post added at 01:09 PM ---------- Previous post was at 01:04 PM ----------
And no, it's not bricked. Mine did the same thing trying to use Chainfire 3D. If you follow the directions it will work. Oh yeah, the first time you turn it on it may not boot. Just hold the power button and restart again and once the boot screens come up you will see the android is updating apps and it will boot.

help I need help
hi everybody
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery
please help.....
will be great full ( have canvas 4 stock rom downloaded)........?

Great news
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE

Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........

Shikhar122 said:
Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........
Click to expand...
Click to collapse
why not just flash the stock ROM using Sp flash tool
---------- Post added at 05:41 PM ---------- Previous post was at 05:34 PM ----------
Ronald Stefinson said:
raj1988 said:
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse
manually install MTK65xx VCOM driver. see the video tutorial below for a guide
Click to expand...
Click to collapse

boot loop and no recovery Canvas a310 nitro (no forum for nitro)
I have rooted my Micromax Canvas Nitro A310 using Kingoroot and installed TWRP recovery before. Also I had installed a Custom ROM of Coolpad F1 from needrom<dot>com. There wasnt any problem till now except the auto rotation. Today i formated my sd card and switched off my phone and on reboot it came to boot loop. It is not booting the ROM and also the TWRP recovery. Shows only the first screen and goes off and on to the screen again. As it does not boot to recovery for me to wipe cache and dalvik, I tried to install drivers again to flash recovery using fastboot, but as its on a boot loop problem and its not standing by for me to install drivers, I am totally stuck. Please help me ASAP.
Sorry for the bad English.
Thank you

jjwaiting4u said:
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE
Click to expand...
Click to collapse
I need a jtag centre to unbrick my Moto e. My location patna

[Q] plzz help its important........................

thank you all i have restored my phone ..............................

pathak414 said:
plzz help my t2 ultra is stuck on bootloader and does not bootup .when i take my phone to service centre they say my phone is dead . and i cannot install firmware on my t2 ultra plz help plz..........
Click to expand...
Click to collapse
explain more properly i am sure something can be done
try charging the phone overnight

Ashwin Prabhunerurkar said:
explain more properly i am sure something can be done
try charging the phone overnight
Click to expand...
Click to collapse
i have tried it but nothing happen . service centre people asking for money to repair it ..

pathak414 said:
i have tried it but nothing happen . service centre people asking for money to repair it ..
Click to expand...
Click to collapse
no notification light?

So you can't even connect it to flashboot or flashtool right?
Even tried with emma?
Sent from my D5322 using XDA Free mobile app

Can you explain how did you end up have dead phone
So that we can help you better
One more thing put your phone in charging for atleast 4 hrs and then try to connect to flash tool
Report back

chauhanjayc said:
Can you explain how did you end up have dead phone
So that we can help you better
One more thing put your phone in charging for atleast 4 hrs and then try to connect to flash tool
Report back
Click to expand...
Click to collapse
i have tried to restore my phone using twrp but it says no OS installed

pathak414 said:
i have tried to restore my phone using twrp but it says no OS installed
Click to expand...
Click to collapse
if twrp is working then relax
your phone is fine
just flash a ftf via flashtool
Google it
and you will be fine

[Q] Hard bricked micromax a1 plz help!!

Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..

can you at least turn on the phone? if not nothing can do other than going to the service center. but since your phone is rooted ,your warranty is already voided so you might have to pay for repairing.

sunny8p said:
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
Click to expand...
Click to collapse
you don't have to go to download mode to restore stock using sp flash tool right? I've done it without even turning on the phone. I think that's how you supposed to restore. Try like this: http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool if that doesn't work, you probably have to go to a service center.

Dhamithl said:
you don't have to go to download mode to restore stock using sp flash tool right? I've done it without even turning on the phone. I think that's how you supposed to restore. Try like this: http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool if that doesn't work, you probably have to go to a service center.
Click to expand...
Click to collapse
he said
"not detected by pc,"
so I don't think it would work if the phone isn't detected properly.

StormyKnight;5 9 31 47 26 said:
can you at least turn on the phone? if not nothing can do other than going to the service center. but since your phone is rooted ,your warranty is already voided so you might have to pay for repairing.
Click to expand...
Click to collapse
Can't turn on phone
Not detected by pc
Can the service center guys still detect that its rooted?

sunny8p said:
Can't turn on phone
Not detected by pc
Can the service center guys still detect that its rooted?
Click to expand...
Click to collapse
probably yes because when you rooted the phone the super user binary goes to /system/bin or /system/xbin folder
and it won't be deleted unless the phone is updated. so the best way is find someone who repairs the phone with jtag and then you can still keep your warranty.

Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:

Can you help me out?
Can you help me out by telling me the procedure of how you did you turn your phone into life? Because I've same issue with my phone just like yours. So I need your help to turn my phone back into life. :crying:

sunny8p said:
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Click to expand...
Click to collapse
Will the latest version of Sp TOOL help in detecting my phone?

Just remove the battery and try to flash the stock rom through sptools

sunny8p said:
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Click to expand...
Click to collapse
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:

sunny8p said:
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
Click to expand...
Click to collapse
install android one toolkit on your pc. then from there flash a custom recovery to your phone using adb. now download a stock rom and place it in your sd card. then flash the custom rom from custom recovery. i hope it will work.
---------- Post added at 01:58 PM ---------- Previous post was at 01:55 PM ----------
konankiakshay said:
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
Click to expand...
Click to collapse
install android one toolkit on your pc. then from there flash a custom recovery to your phone. now download a stock rom and place it in your sd card. then flash the rom from custom recovery. i hope it will work.

konankiakshay said:
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
Click to expand...
Click to collapse
I am in the same situation of connection and disconnection of my bricked mmx a26 to pc, have you found a way to get out of this? If yes pls. provide to help me

Bricked & USB not recognized
My micromax canvas a1 is bricked and tried flask it using sp flash 5.14 but the phone is not recognised in the flash

I have Canvas A1, it gets detected and SP starts flashing and completes it. Shows Green tick (ok) but the phone doesn't boot up. How the phone got bricked? Well one of my idiot friend tried flashing with SP flash tool, don't know what he did but after that my phone never booted up. The service centre told they don't have motherboard for the device available. Is there any way to fix it. Can someone please list down all the drivers that are needed, the ROM that has to be flashed and all the steps to take to fix the device. It would be really helpful for everyone who have their device bricked.

Accidently deleted my os

PLEASE HELP ME I ACCIDENTLY deleted my os now all i can see is lg logo and it goes and nothing comes after that.the power buttons to boot in to recovery mode is in vain and mypc does not recognise my device .if i could go to boot menu i culd do something but it wont go please help me please please !! :crying:

Enter download mode and install new firmware. It will take about 30 mins.
Sent from my LG-F240K using XDA Free mobile app

akshaybose said:
PLEASE HELP ME I ACCIDENTLY deleted my os now all i can see is lg logo and it goes and nothing comes after that.the power buttons to boot in to recovery mode is in vain and mypc does not recognise my device .if i could go to boot menu i culd do something but it wont go please help me please please !! :crying:
Click to expand...
Click to collapse
Turn on you phone while holding both volumn + power buttons. If that doesn't open the download menu, you need to take out the battery; connect usb cord to your device, while holding all the buttons (volumes and power) plug the other end USB cord to your Pc, and put the battery back in, then let go of the buttons. Keep try both of those methods, and you should be able to get the download menu to flash the firmware. Otherwise you can't do anything.

hawkwind212 said:
Turn on you phone while holding both volumn + power buttons. If that doesn't open the download menu, you need to take out the battery; connect usb cord to your device, while holding all the buttons (volumes and power) plug the other end USB cord to your Pc, and put the battery back in, then let go of the buttons. Keep try both of those methods, and you should be able to get the download menu to flash the firmware. Otherwise you can't do anything.
Click to expand...
Click to collapse
i tried that with lg flash tools but i think i have some prob with it . can you provide a download link for the software to flash the firm ware ?

akshaybose said:
i tried that with lg flash tools but i think i have some prob with it . can you provide a download link for the software to flash the firm ware ?
Click to expand...
Click to collapse
There are 2-3 threads on re-flashing complete stock using flash tools. Here is one: http://forum.xda-developers.com/showthread.php?t=2764076. Search also for others and see which works best for you. The flash back is no big deal, so have no fear! (Turn off internet when using LG Flash tools, or sometime ET calls home !

LG Optimus G Pro E988 Bricked Issue
Hi there my friend I have bought LG Optimus G Pro E988 recently but 4G LTE was not working on it so I tried to update its ROM and while doing it unfortunately it bricked. Now when ever I tried to power on my phone it shows LG logo and reboot again and again and nothing pop up i tried many things with download mode but it does not work and it is also not going in recovery mode and I cant find its bootloader. Could anyone please help me this

Deleted.
---------- Post added at 03:16 AM ---------- Previous post was at 03:07 AM ----------
Adnan323 said:
Hi there my friend I have bought LG Optimus G Pro E988 recently but 4G LTE was not working on it so I tried to update its ROM and while doing it unfortunately it bricked. Now when ever I tried to power on my phone it shows LG logo and reboot again and again and nothing pop up i tried many things with download mode but it does not work and it is also not going in recovery mode and I cant find its bootloader. Could anyone please help me this
Click to expand...
Click to collapse
Ok....for E988 go here http://forum.xda-developers.com/showthread.php?t=2754294
Good luck!
Sent from my GT-N8013 using XDA Free mobile app

chappatti said:
Deleted.
---------- Post added at 03:16 AM ---------- Previous post was at 03:07 AM ----------
Ok....for E988 go here http://forum.xda-developers.com/showthread.php?t=2754294
Good luck!
Sent from my GT-N8013 using XDA Free mobile app
Click to expand...
Click to collapse
Dear Friend KDZ file is not found in the thread

Adnan323 said:
Dear Friend KDZ file is not found in the thread
Click to expand...
Click to collapse
Here it is from hyelton's thread http://storagecow.eu/index.php?dir=Xda/LG+Optimus+G+Pro/Stock/
All stock roms. Explore the website menus....lots of good stuff.
Sent from my GT-N8013 using XDA Free mobile app

chappatti said:
There are 2-3 threads on re-flashing complete stock using flash tools. Here is one: http://forum.xda-developers.com/showthread.php?t=2764076. Search also for others and see which works best for you. The flash back is no big deal, so have no fear! (Turn off internet when using LG Flash tools, or sometime ET calls home !
Click to expand...
Click to collapse
thank you for the thread it really did help me out thanks bro :fingers-crossed:

phone wont switch on
oh something bad happend while flashing my device i used a e980 stock rom to flash and it showed fail , and after that the phone wont switch on like before it wont switch on it seems i tried charging but even if i plug in the device charger the phone wont switch on. now i cant even acces download mode please help me please :crying: :crying: its been a month nd i am not succesful in flashing my device.. anybody please help me

Have you tried all the methods I mentioned in earlier post to turn on the download mode? Try them first, and if those methods don't work, then you can plug your phone to a PC and look under the device manager what your phone appears as. If it's recognize as a lg device, then you should keep trying those methods I've mentioned until you get the download mode. However, if your phone is not recognize at all, or it's been seen as something that has word Qualcomm qdhs something in it, then phone is hard bricked. If that is the case, then I can only suggest you try the following link, get the jtag service, else get yourself another phone. Because hard brick, if you have never heard the word before, it means just how it sounds, you got a hard brick on your hand.
http://forum.xda-developers.com/showthread.php?t=2829684

hawkwind212 said:
Have you tried all the methods I mentioned in earlier post to turn on the download mode? Try them first, and if those methods don't work, then you can plug your phone to a PC and look under the device manager what your phone appears as. If it's recognize as a lg device, then you should keep trying those methods I've mentioned until you get the download mode. However, if your phone is not recognize at all, or it's been seen as something that has word Qualcomm qdhs something in it, then phone is hard bricked. If that is the case, then I can only suggest you try the following link, get the jtag service, else get yourself another phone. Because hard brick, if you have never heard the word before, it means just how it sounds, you got a hard brick on your hand.
http://forum.xda-developers.com/showthread.php?t=2829684
Click to expand...
Click to collapse
yea it got hard bricked :crying: ill try my bestits been a month n i have lost all my hope

[/COLOR]
akshaybose said:
yea it got hard bricked :crying: ill try my bestits been a month n i have lost all my hope
Click to expand...
Click to collapse
Dud you try the hard brick fix link post from hakwind? You need Ubuntu but you can easily install it on any pc....
Sent from my GT-N8013 using XDA Free mobile app

chappatti said:
[/COLOR]
Dud you try the hard brick fix link post from hakwind? You need Ubuntu but you can easily install it on any pc....
Sent from my GT-N8013 using XDA Free mobile app
Click to expand...
Click to collapse
yea but i ve been tryin to download the india e988 kdz file from storagecow but its soo slow that it shows it takes almost 2 days to download nd am not at home am residing in hostel so i can only download thru college wifi .so first i have to download ! but it takes a hell a lot of time

akshaybose said:
yea but i ve been tryin to download the india e988 kdz file from storagecow but its soo slow that it shows it takes almost 2 days to download nd am not at home am residing in hostel so i can only download thru college wifi .so first i have to download ! but it takes a hell a lot of time
Click to expand...
Click to collapse
Yes, in India the speed barely goes above -80 Kbps. Just bad....?
Sent from my GT-N8013 using XDA Free mobile app

chappatti said:
Yes, in India the speed barely goes above -80 Kbps. Just bad....?
Sent from my GT-N8013 using XDA Free mobile app[/QUOTE
do you have any alternate download link still i am not sucessful in downloading it. am using an e988 korean made . if you bychance find any google drive files please let me know thank you
Click to expand...
Click to collapse

chappatti said:
Yes, in India the speed barely goes above -80 Kbps. Just bad....?
Sent from my GT-N8013 using XDA Free mobile app
Click to expand...
Click to collapse
i cannot extract my kdz file using the software mentioned in the earlier thread
i gave my phone to service centre they told they wont repair coz its a korean made e988 ! can you post any link that has a korean e988 stock kdz pleaze :crying:

signature verification failed

guys i cant get inside of phone idk somehow i messed up now when i switch on the mobile the android sign is running and i cant get inside.So i got stucked then after some google research finally reached xda and then i download Android A1 rom file.Now the new problem araises is that "signature verifiaction failed"... is there any method to solve this problem?
p.s: i cant get inside of phone so dont tell me to download some recovery software
is there any method which involving computer which magically insert new o.s in the phone huh

hanish8 said:
guys i cant get inside of phone idk somehow i messed up now when i switch on the mobile the android sign is running and i cant get inside.So i got stucked then after some google research finally reached xda and then i download Android A1 rom file.Now the new problem araises is that "signature verifiaction failed"... is there any method to solve this problem?
p.s: i cant get inside of phone so dont tell me to download some recovery software
is there any method which involving computer which magically insert new o.s in the phone huh
Click to expand...
Click to collapse
Bro download sp flash tools and stock rom canvas a1 from xda then flash it through ur pc

dsbhai said:
Bro download sp flash tools and stock rom canvas a1 from xda then flash it through ur pc
Click to expand...
Click to collapse
Bro I download this software which I found in YouTube video the problem is phone is not detecting by computer I even downloaded new drivers too.I don't know wat to do I had given to service centre they can't even solve the problem they are saying they have to sent to micromax company it would take more than 45 days

hanish8 said:
Bro I download this software which I found in YouTube video the problem is phone is not detecting by computer I even downloaded new drivers too.I don't know wat to do I had given to service centre they can't even solve the problem they are saying they have to sent to micromax company it would take more than 45 days
Click to expand...
Click to collapse
Are u on stock or costum recovery