Develop Bugs

lg e975 stuck in clockworkmod boot loop

I recently installed miui from official website for lg e975. My phone is lg f180 so they both are same.
It was working fine till this morning it asked for update. I allowed. It retarted and now it starts shows google logo. Then goes to recovery.
I flashed my original backup rom. Then even flashed miui rom. Nothing changes. I wiped cache. Data dalvik a lot of times.
It just starts shows google logo. Goes to recovery. Please help
Im sorry if this thread doeant belong here. Mods please move

Thought i should add.
I dont have any other access but cwm recovery
I only have a backup of my original rom through cwm. No kdz files.
I have a miui zip rom on phone as well

awais3344 said:
Thought i should add.
I dont have any other access but cwm recovery
I only have a backup of my original rom through cwm. No kdz files.
I have a miui zip rom on phone as well
Click to expand...
Click to collapse
Flash stock zip kernel from artmod thread.

the problem is. I can't upload any files to mobile phone. if i connect to pc, it turns on, goes to recovery, so I click on mount storage, and other mount option, nothing happens. My computer detects phone as F180L with a exclamation mark.
If i go to download mode, and then try to flash any KDZ file from all the f180 KDzs. It gives me errors.
LG Support Tool on entering serial number and model name says "check out serial number and model"
ADB never detects my phone. So I can't upload anything.
No option to upload files via SD Card.

ok, so I have no clue what happened :crying: phone was in download mode. I did nothing, but only installed LG Support Tool USB driver, while the mobile connected.
Then I installed Microsoft .net framework 4.0. And my phone is now qhs_usbdload. it's officially bricked now. I have no clue what happened. This is all that happened before I restarted and selected "reboot to bootloader" and its dead. So there's nothing left to do but throw it out

WTF OKAY! I have no clue!
But, after seeing that qhs usbdload. (i have seen that before with other phones). I complete lost any hope.
So I for feeling contended, downloaded qpst, and emmc software download, and selected MPRG8064.hex and msimage.bin.
Then like I expected it threw an error "image download failed, cookie if present not received"
so I lost hope disconnected my phone and put it there. After a few minutes thought I should try one last time.
so I connect it my pc and VIOLA it turns ON!?
now I have that same rebooting to recovery problem. I have no explanation for whatever has happened to phone in past 3 hours. I have been with phones for years. This is the weirdest thing to happen ever :angel:
Now someone, please help me?

1. Why is this in Development section?
2. You can't mount internal SD as USB storage. Use adb push or adb sideload instead, that will help you to get the files onto your phone.

awais3344 said:
WTF OKAY! I have no clue!
But, after seeing that qhs usbdload. (i have seen that before with other phones). I complete lost any hope.
So I for feeling contended, downloaded qpst, and emmc software download, and selected MPRG8064.hex and msimage.bin.
Then like I expected it threw an error "image download failed, cookie if present not received"
so I lost hope disconnected my phone and put it there. After a few minutes thought I should try one last time.
so I connect it my pc and VIOLA it turns ON!?
now I have that same rebooting to recovery problem. I have no explanation for whatever has happened to phone in past 3 hours. I have been with phones for years. This is the weirdest thing to happen ever :angel:
Now someone, please help me?
Click to expand...
Click to collapse
Some user got that problem before. I am not sure about how they solve it but I guess that they flash their original KDZ back. If your phone can enter download mode, you should try LG Flash tool 2014 and flash your original kdz to restore incorrect system image.
About adb cannot find your phone, try to remove adb driver from device manager and reinstall LG usb driver.

artit said:
Some user got that problem before. I am not sure about how they solve it but I guess that they flash their original KDZ back. If your phone can enter download mode, you should try LG Flash tool 2014 and flash your original kdz to restore incorrect system image.
About adb cannot find your phone, try to remove adb driver from device manager and reinstall LG usb driver.
Click to expand...
Click to collapse
My phone is acting weird. Sometime it would start. Sometime the red light would blink. Sometimes the red light wouldn't blink at all. Then sometimes, it starts. And then it doesn't.
I have no clue what is going on with it.
But it went to download mode many times again, it would go to fastboot, bootloader, recovery etc. Then sometimes it will not respond to any buttons at all! I know its battery is down, but idk if it's charging or not?
I don't know how to know whether the phone is charging or not. I left it charging for 30 minute, and it didn't even buzz. :crying:

awais3344 said:
I know its battery is down, but idk if it's charging or not?
I don't know how to know whether the phone is charging or not. I left it charging for 30 minute, and it didn't even buzz. :crying:
Click to expand...
Click to collapse
One thing you can do (I've done it in the past a couple of times) is to crack your phone open, disconnect the battery, and charge it with an external charger. That would at least give you a full battery to start with...

Regarding the charging problems, I had that once. I was able to startup the phone by simply using a 2A charger instead of the LG's 1.2A.

When I had this issue it was charging while in recovery. Please look at this post and flash your kdz.
http://forum.xda-developers.com/showthread.php?p=54934779. This one helped me http://forum.xda-developers.com/showthread.php?p=53728658
Sent from my LG-E975 using XDA Free mobile app

kt-Froggy said:
One thing you can do (I've done it in the past a couple of times) is to crack your phone open, disconnect the battery, and charge it with an external charger. That would at least give you a full battery to start with...
Click to expand...
Click to collapse
thanks. but after charging it. I couldn't turn the screen off because it goes in recovery. I turned off the phone after good 30 minute charging. Then went to sleep. And in the morning I connected it to pc. by holding volume buttons for download mode. It didn't go to download mode. Only it's red light is blinking. and no display.

awais3344 said:
thanks. but after charging it. I couldn't turn the screen off because it goes in recovery. I turned off the phone after good 30 minute charging. Then went to sleep. And in the morning I connected it to pc. by holding volume buttons for download mode. It didn't go to download mode. Only it's red light is blinking. and no display.
Click to expand...
Click to collapse
Hey man. I have exaxt same prolem when update miui. Just do this when you got your recovey. Connect your phone to pc, let your pc update driver. Use adb sideload to flash stock zip kitkat e975 lgviet. Goodluck.

huy_gm said:
Hey man. I have exaxt same prolem when update miui. Just do this when you got your recovey. Connect your phone to pc, let your pc update driver. Use adb sideload to flash stock zip kitkat e975 lgviet. Goodluck.
Click to expand...
Click to collapse
Hi, regarding that. I was able to sideload exitrecovery.zip file. It goes to 100% then nothing happens. Nothing happened on phone screen as well.
And can you send me link to that stock zip kitkat? i have a miui.zip and few other roms that I have not tried. thanks
Edit: also what should I do about adb, am i doing correct?
Becuase in adb devices, my device is displayed with deviceID sideload
And i have only pasted adb folder, with a dll and a zip file, there is nothing else, do I need to install SDK?

I tried lg flash tool 2014 again, and it flashed, I swear yesterday I tried to flash it, and after clicking on it, it never showed me country and language selection menu, so it would sit there and do nothing. now I don't know how but it did it :laugh:
thank you so much you'all

[Q] Weird Bricked please help.

I have really searched and searched whatever i could but could not achieve any thing sorry for opening a new tread but i am really desperate for fixing my G.
So to start i was on Art Mod v7 and i saw that he posted a black theme so i installed it after installing some system stop responding what i guessed that it might be i didn't wipe cache, well i did that and got into soft brick, i am not blaming him for any thing it was all me , so i should have flashed new kdz but i didn't do that i flashed teenybin Files i dont know why i did that but i did resulted in a different kind of brick.
So problem is i have fastboot i have download mode but device some times get detected on download some times it doesn't when it did i tried flashing kdz through lg kdz flasher but resulted in continuous operation break also no driver is detected in fastboot and more over no recovery as it is in secure boot. I am a noob so please do bear my questions.
do kindly help LGOG is in continous bootloop more to add.
some what LGNPST detects phone in download mode the same application given with teenybin.
Kindly do help i know about android i just read silently but this time i am unable to solve it.

What system do you have on the machine that you're trying to flash the KDZ file? Did you install the LG driver?
I had trouble to flash kdz on my device from Windows 8.1 64bit. The flash would freeze after some time and nothing would happen. Try it maybe on another computer but after installing all the needed drivers.
Which software do you use to flash the KDZ file?

thank you for replying
malimukk said:
What system do you have on the machine that you're trying to flash the KDZ file? Did you install the LG driver?
I had trouble to flash kdz on my device from Windows 8.1 64bit. The flash would freeze after some time and nothing would happen. Try it maybe on another computer but after installing all the needed drivers.
Which software do you use to flash the KDZ file?
Click to expand...
Click to collapse
Win 7.1 well i know it freezes and for me it usually unfreezes after the kdz unpacks
well for kdz i used this
http://forum.xda-developers.com/showthread.php?t=2010624
bro please could you link some one to this post who might help ?

Irazor73 said:
Win 7.1 well i know it freezes and for me it usually unfreezes after the kdz unpacks
well for kdz i used this
http://forum.xda-developers.com/showthread.php?t=2010624
bro please could you link some one to this post who might help ?
Click to expand...
Click to collapse
I used the LG Flash Tool 2014 to flash the KDZ file
here is the link: http://www.mediafire.com/download/b2z1etctmettop3/LG_Flash_Tool_2014.rar
Type: 3GQCT
PhoneMode: CS_Emergency
It took me a few tries to get it working, it always stopped at 10% giving some silly error. I dont remember exactly what it was but after few tries it all went okay.
Hope it will help

Thank you bro for agian replying
malimukk said:
I used the LG Flash Tool 2014 to flash the KDZ file
here is the link: http://www.mediafire.com/download/b2z1etctmettop3/LG_Flash_Tool_2014.rar
Type: 3GQCT
PhoneMode: CS_Emergency
It took me a few tries to get it working, it always stopped at 10% giving some silly error. I dont remember exactly what it was but after few tries it all went okay.
Hope it will help
Click to expand...
Click to collapse
But it didnt help either

i am getting this error
malimukk said:
What system do you have on the machine that you're trying to flash the KDZ file? Did you install the LG driver?
I had trouble to flash kdz on my device from Windows 8.1 64bit. The flash would freeze after some time and nothing would happen. Try it maybe on another computer but after installing all the needed drivers.
Which software do you use to flash the KDZ file?
Click to expand...
Click to collapse
seems to be device is recognized in download mode because its asking for drivers like mako drivers
error what i am getting is
please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu
so shall i do or there is an alternative?

Irazor73 said:
seems to be device is recognized in download mode because its asking for drivers like mako drivers
error what i am getting is
please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu
so shall i do or there is an alternative?
Click to expand...
Click to collapse
I'm sorry but I really have no more ideas on how to help you. I did not have similar problems, I had a problem when my phone didn't want to boot anywhere except download mode. But the flash went through after a few tries.
Maybe you should try to flash it on a different computer? Install drivers and everything again and try to flash again. There may be a problem with drivers or something

I got it, done it
malimukk said:
I'm sorry but I really have no more ideas on how to help you. I did not have similar problems, I had a problem when my phone didn't want to boot anywhere except download mode. But the flash went through after a few tries.
Maybe you should try to flash it on a different computer? Install drivers and everything again and try to flash again. There may be a problem with drivers or something
Click to expand...
Click to collapse
Well i have retrieved my mobile from qusb_dmode means from hardbrick :victory:
alot of info trust me alot of it

Irazor73 said:
seems to be device is recognized in download mode because its asking for drivers like mako drivers
error what i am getting is
please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu
so shall i do or there is an alternative?
Click to expand...
Click to collapse
I have the same problem, at around 10% of flashing i get the same error:
"please disconnect the cable from the phone in order and remove and connect the battery
power on the cell phone and press the restart button to resume update
if lg support tool is stopped abnormally try with (options)-(upgrade recovery) in tool menu "
What did you end up doing? I've been trying for weeks to unbrick my phone i even took it to 3 cellphone repair guys in my town and no one knows how to unbrick it.
Please get back to me! Im stuck.

LGUP unknown model and LG flashtool not working

Hi guys,
i recently use layers for my xenonhd rom (lg f400LL)
and then i reboot then boom it goes bootloop
what i have to do?i hardbrick my phone recently and i fix that by doing the shorwire method
but rightnow i use LGUP but it says that:
http://imgur.com/KTK9Vrb
i can still access download mode but i have problems on accessing the twrp recovery because it always boot on the bootloop,i mean
i have problems on using hardware keys to access twrp.
Sir pls help me

Stiffmeistro said:
Hi guys,
i recently use layers for my xenonhd rom (lg f400LL)
and then i reboot then boom it goes bootloop
what i have to do?i hardbrick my phone recently and i fix that by doing the shorwire method
but rightnow i use LGUP but it says that:
http://imgur.com/KTK9Vrb
i can still access download mode but i have problems on accessing the twrp recovery because it always boot on the bootloop,i mean
i have problems on using hardware keys to access twrp.
Sir pls help me
Click to expand...
Click to collapse
I didn't had the same issue as you, but had a similiar one (phone didn't get discovered neither by LGUP nor LG Flash Tool). Yesterday I fixed it by following this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
In particular the part where you change your device to COM41 in the device manager.
After you get it discovered by LG Flash Tool flash an official KDZ.
Reboot the phone and connect it to your Windows, allow the connection from the phone screen.
It should promt you to install drivers on the computer, do that (they are different from LG Drivers you download from the web mind you)
Now you can change your COM port back to 3 and everything should be fully discoverable by both LGUP and LG Flash Tool.

I think I replied to you on reddit (same photo) Have you tried plugging the phone in while in download mode ? Did you try installing drivers from the internet ? Coz thats how I fixed the same problem you have.

Fluffywolf said:
I think I replied to you on reddit (same photo) Have you tried plugging the phone in while in download mode ? Did you try installing drivers from the internet ? Coz thats how I fixed the same problem you have.
Click to expand...
Click to collapse
engmia said:
I didn't had the same issue as you, but had a similiar one (phone didn't get discovered neither by LGUP nor LG Flash Tool). Yesterday I fixed it by following this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
In particular the part where you change your device to COM41 in the device manager.
After you get it discovered by LG Flash Tool flash an official KDZ.
Reboot the phone and connect it to your Windows, allow the connection from the phone screen.
It should promt you to install drivers on the computer, do that (they are different from LG Drivers you download from the web mind you)
Now you can change your COM port back to 3 and everything should be fully discoverable by both LGUP and LG Flash Tool.
Click to expand...
Click to collapse
Hey Bro'ssss
now i am stuck on the recovery
i always flash the rom but when i boot it always go to the recovery(twrp)

Stiffmeistro said:
Hey Bro'ssss
now i am stuck on the recovery
i always flash the rom but when i boot it always go to the recovery(twrp)
Click to expand...
Click to collapse
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result

engmia said:
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
Click to expand...
Click to collapse
Thanks man its all ok now
i dont have time to explained what i did but it works
Many thanks to all of you

hey guys, LGUP will not see my phone at all(LGV10) its in download mode , but does not come up. its stuck on LG boot screen and wont go past it. any help would be appreciated... I am, or was rooted anyway, and trying to reflash again. need to in order to fix it now. thanx

1SouthernCanuck said:
hey guys, LGUP will not see my phone at all(LGV10) its in download mode , but does not come up. its stuck on LG boot screen and wont go past it. any help would be appreciated... I am, or was rooted anyway, and trying to reflash again. need to in order to fix it now. thanx
Click to expand...
Click to collapse
Just read over the thread, it's what it's here for.

Stiffmeistro said:
i dont have time to explained what i did but it works
Click to expand...
Click to collapse
You asked for other people's time to help you, but now you don't have time to explain how you made it work?
Yeah... there MIGHT be other people with the same problem, but why would you care to share.
What an as*hole you are. Another typical new buttuser ruining a great dev community.

exactly
leandeganis said:
You asked for other people's time to help you, but now you don't have time to explain how you made it work?
Yeah... there MIGHT be other people with the same problem, but why would you care to share.
What an as*hole you are. Another typical new buttuser ruining a great dev community.
Click to expand...
Click to collapse
Exactly, here I am running around in circles over this BOOST Stylo 2, just got it with MM 6.0.1 out of the box 2 days ago. I caught the 454.4mb update it has been trying to do! Got that baby downloaded! 1.02gb unzipped and renamed to kdz. Got a script for Terminal that will replace Kingroot's temp root with SuperSU but I am not going to attempt any further until I know LGUP will recognize and flash my .zip the bas****s deem not worth enough to put up for download on LG's site!
I got LGUP to recognize it in download mode, reads out LGLS775 but still says it cannot open it...............
His info on how he got it to work would prolly have solved this dillema..............
oh well
zach

ok had a LG G3 that's done this- as long as you can get download mode it should recover, YOU need to use the LG mobile support tool from LG website ( LG UP sees phone as unknown model ) run LG mobile Support tool and in option choose UPGRADE RECOVERY . follow instructions and allow to start process, it took 57 minutes to repair my phone - it will seem frozen anywhere from 0% to about 22% JUST WAIT IT OUT!! lg up / twrp flashes in 5 to 10 mins -- the LG m.s.t writes block by block and takes 1 hour +
so hints and info took 3 goes to find and start upgrade recovery - error on a couple of attempts. phone seems frozen around 10% and 15% of firmware upload -- go make a coffee drink it, go pee then come back and worry! A watched pot never boils!....

Stiffmeistro said:
Thanks man its all ok now
i dont have time to explained what i did but it works
Many thanks to all of you
Click to expand...
Click to collapse
please tell me how to solved your problem my D682 deivce is always opening on recovery but there is no recovery menu just android robot

I have same issue as op described .After unbrick my g3 f400s by short wire method i get error at 94% in tot method and red screen show these word error wrong qem =0 .After remove and put battery again mobile runing but without baseband and null imei .Plz help i need really help

Same here. LGUP Says it is not recognized, even if it says it's a LG G3 855... Trying the LG Mobile Support Tools -> UPGRADE RECOVERY using my Model/serial.
Downloading right now...
Hope it works.
I will tell you when/if I got it to work
Also: Stiffmeistro you're a ****...
---------- Post added at 03:33 AM ---------- Previous post was at 03:22 AM ----------
Sedado77 said:
Same here. LGUP Says it is not recognized, even if it says it's a LG G3 855... Trying the LG Mobile Support Tools -> UPGRADE RECOVERY using my Model/serial.
Downloading right now...
Hope it works.
I will tell you when/if I got it to work
Also: Stiffmeistro you're a ****...
Click to expand...
Click to collapse
It didn't. It's EVEN MORE broken :'(

I figured out how to get my PC to recognize my D851. Apparently all the LG software didn't like how many COM ports I have. As soon as I unplugged everything else from my PC, the software worked. In this case, it was LG Flash Tool 2014, but I couldn't get any of them to work before.

Try running LGUP as Admin!!! For me it worked!
Try running LGUP as Admin!!! For me it worked!

Thankx Bro Its Work
engmia said:
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
Click to expand...
Click to collapse

Hope someone can help me. I flashed a rom for a d855, d855g30 I think, and although I can access download mode all aps for flashing fail saying it's the wrong model number. Even the generic DLL file cant trick it. It still starts booting the rom but boot loops before entering. I no longer have twrp and when I try to do safe mode or factory reset I get a boot validation error or something similar. Just seem to be stuck. Im using a VS985.

One cause of LGUP "UNKNOWN"
While an old thread, it'll be found in searches. For anybody who gets "UNKNOWN" device with LGUP for the LG G3, I found that LGUP for the G3 is often distributed with the wrong DLL file. See the details here, post #11. After installing LGUP, make sure that the "model" subdirectory in the LGUP program directory is the same number as the processor in your phone, in my case c:\Program Files (x86)\LG Electronics\LGUP\model\8974 (was 8994 with the "LGUP for G3" I downloaded).
HTH

Bricked lg g3 need help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

so i wanted to flash fulmics rom on my brand new lg g3 (p.s my old one wouldnt charge) but when i flashed my d852 bell firmware on it via LGUP my went back from getting a drink and my lg g3 was stuck on an android with a thing in its chest spinning and its just stuck there i tried all programs even with a bell marshmallow kdz and it says (lg flash tool and LGUP tot method) communication fail with device and on lg flash tool 2014 kdz method it just fails and i did confirm that nothing was wrong with my hardware and software and is there an alternative my goal is to flash twrp with download mode, wipe the system and flash a rom but how? i also dont want to take it back or take it to a shop i want to do this all on my own and i need your guys help. god bless you if you help me fix this. thanks
-moreogthanu p.s its a very old name

does anything show up in device manager when you plug it in?

yes its hows up lgeandroid net usb something... the normal stuff

moreogthanu said:
yes its hows up lgeandroid net usb something... the normal stuff
Click to expand...
Click to collapse
i meant LGE mobile usb serial port (com7) and in portable devices its says LGE android MTP device and its has a yellow trangle

so does anything show up when you turn it on? how far does it get in booting? it goes to DL mode everytime? and that's what is in device manager in DL mode?

paujmos said:
so does anything show up when you turn it on? how far does it get in booting? it goes to DL mode everytime? and that's what is in device manager in DL mode?
Click to expand...
Click to collapse
it boots into dl mode but i cant flash firmware yesterday i recorded it. it boots to lg logo and after 29 seconds it boot to the android guy i did find something in yellow text but it flickers and that says. in short
E: failed to mount /cache (no such file or directory) then can't mount /cache/recovery/log
can't open /cache/recovery/log
and it repeats that text 3 times from what i saw

did you install twrp? i would check your drivers or the cable for the communication failure in dl mode

paujmos said:
did you install twrp? i would check your drivers or the cable for the communication failure in dl mode
Click to expand...
Click to collapse
My goal is to try and install TWRP my phone fully stock I checked everything even my charging port. I'm using the lg cable... My main goals are to get this fixed before March 3 and all I need is an alternative. Get TWRP or return back to stock

at least give me a script to boot to stock android recovery without adb. cause obviously i cant use adb and i hope anybody reading this can remember that with lg flash tool 2014 kdz method it goes to 4 and stops unless you guys find fix to that. all i need is to get this thing fixed before march 3rd. so if you guys help me find any kind of fix this is all i need
here is info but my phone
model: lg-d852 (don't really need it though)
status: stock unrooted device and has never booted into the system
android version: 4.4.2 kitkat
main problem that needs to be fixed: it cant mount cache cause apparently there is no file or directory according to my phone
that's it. if you guys need anymore info about my phone let me know (except imei or serial number cause that's all private stuff) thanks
-moreogthanu it's a very old name

use the tot method. never seen it not work assuming youre in download mode and have working drivers/cable

paujmos said:
use the tot method. never seen it not work assuming youre in download mode and have working drivers/cable
Click to expand...
Click to collapse
I used every method

then you must force it into the 9008 mode using the following guide. I would check the dll you are using, drivers, or cable first through. I would be EXTREMELY SUPRISED of a g3 in DL mode that is non-responsive.
https://forum.xda-developers.com/verizon-lg-g3/general/how-to-hardbrick-guide-using-test-t3276928

paujmos said:
use the tot method. never seen it not work assuming youre in download mode and have working drivers/cable
Click to expand...
Click to collapse
girlfriend took my phone somewhere to fix it if she comes back with no results i'll update you

moreogthanu said:
girlfriend took my phone somewhere to fix it if she comes back with no results i'll update you
Click to expand...
Click to collapse
i'm surprised that my lg g3 in download mode with the correct dll, tot, kdz. every single program with a fully working charging port and an lg cable is that unresponsive. although at one point the arrows in download mode started spinning an then it stopped and on the monitor it said on lg flash tool (tot method). CAUTION: Primary gpt has invalid value there must be something blocking the connection
oh and my phone is still getting fixed soooooooooo no updates just yet. but like i said if there are no results i'll update you

HEEEEEEEELLLPP!!! i think i bricked my G7! QUICK!!

im super worried right now, this is my only phone and really need it these days, thing is i tried to flash a kdz to my phone with lg up 1.14 and worked, everything was fine, but it had a may 2019 security patch and didnt want to update via OTA, so i downloaded a more recent kdz and did the same, but now with LG UP 1.15, thing is, this time, when it was supposed to reboot and show a circle that says "erasing" it stayed off.
now it doesnt react to anything, not even the volume down+power or the volume up and conecting to acces download mode it stays at a blank screen with no reaction, not even a vibration.
however, when changing ports, it stared installing a divice, however it said this:
qusb_bulk_cid:0402 _sn:c9aaeafb is set up and ready to go
i sherched and this appears to be a qualcomm brick, please tell me i can recover my phone.
someone help me quick please

ok, i installed qualcomm drivers and now my phone is detected as hs usb qdloader 9008 (COM9), which indeed is a qualcomm brick.
does anyone knows what to do next?

I think you can flash with qfil but I don't have much knowledge about that, sorry ... I hope someone who knows about it will help you soon

Ricky Almonte said:
I think you can flash with qfil but I don't have much knowledge about that, sorry ... I hope someone who knows about it will help you soon
Click to expand...
Click to collapse
yeah, i read that, got the files, even the firehose and did it. but now i have a new problem, im still brick but now my phone cant be recognice, every time it is conected the only thing it happens is the led blinking red, which i read it is the worst possible outcome. (im sure i did the qfile process correctly, i did it very carfully and only after reading like 6 posts so that i could be well informed.... it got quite techy)
why!! :crying::crying:
i read that mostly happens to the t mobile version of the phone, but mine is the cannadian one, i dont get it.
can someone now help me with this red blinking led?? i read a lot but the only thing i found is that ill need to open my phone and use the test points to access qualcomm mode, but it doesnt say more, i dont know where to begin:crying:

did u flash on lgup via cmd or via GUI? if gui, u picked refurbish or other command? Some guys erase their imei mac etc picking other commands in the gui (dl partition is safe), making their smartphone become a thing made of hardware with no identity.

manuhuelva said:
did u flash on lgup via cmd or via GUI? if gui, u picked refurbish or other command? Some guys erase their imei mac etc picking other commands in the gui (dl partition is safe), making their smartphone become a thing made of hardware with no identity.
Click to expand...
Click to collapse
mmmm... i used the lgup version 1.13 via GUI, for my first time, i used refurbish since it was the default, it worked fine.
when i downloaded a more recent kdf for my second install, i also downloaded the version 1.14 for the lgup, i tried to acces the gui like normal but didnt work since it asked me to log in, so i read i could also do it via CMD, so i used CMD for my second test.
Thats when my phone began intalling like normal, but in the reboot section of the install, it turned off to never turn on again

ThePanhead said:
mmmm... i used the lgup version 1.13 via GUI, for my first time, i used refurbish since it was the default, it worked fine.
when i downloaded a more recent kdf for my second install, i also downloaded the version 1.14 for the lgup, i tried to acces the gui like normal but didnt work since it asked me to log in, so i read i could also do it via CMD, so i used CMD for my second test.
Thats when my phone began intalling like normal, but in the reboot section of the install, it turned off to never turn on again
Click to expand...
Click to collapse
I hope u could resolve it. try other lgup versions. If u cant go download mode, hold vol- and power with plugged usb to pc and when the phone restarts u have to release too fast the buttons and hold vol+ until u get into download mode.

Hi, so my phone boots to lg g7 thinq splash screen and gets stuck there. I have a PM flashed to 11g. I can access download mode, edl, fastboot, and I can access all partitions in qfil. Can anyone send a copy of their mpt partition? I think I overwrote it on accident. Thanks.

Try this method...
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841

Reyklein said:
Try this method...
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
Click to expand...
Click to collapse
I'm currently trying that out now. Can you backup your mpt partition in qfil so I can download it? Thank you.

I was actually successful in using qfil to flash but sadly it still isn't enough to fix my problem. It still stays stuck at "lg g7 thinq" splash screen. Also lost access to fastboot.

damprobot said:
I was actually successful in using qfil to flash but sadly it still isn't enough to fix my problem. It still stays stuck at "lg g7 thinq" splash screen. Also lost access to fastboot.
Click to expand...
Click to collapse
In edl mode load xml file 0 and again edl mode load xml1 ......... Repaet till xml6

Baijoosharma said:
In edl mode load xml file 0 and again edl mode load xml1 ......... Repaet till xml6
Click to expand...
Click to collapse
I flashed them one by one this time and still it won't boot completely. If anyone can share their mpt partition from qfil it'd be much appreciated.

damprobot said:
I flashed them one by one this time and still it won't boot completely. If anyone can share their mpt partition from qfil it'd be much appreciated.
Click to expand...
Click to collapse
This is the only option i did it in 4 days repeat and repeat thats it r u usung same ezdextrat file attached in thread ir your own extracted files ? Doenload from here and repeat 0123456 untill monile turn on you will loss imei

I know I'm doing it correctly, as you can see in my screenshot above. The extracted files are not what I need. I need mpt partition, which isn't part of the kdz.
In other words, I messed up a partition the kdz won't fix.

I fixed my issue. Turns out my mpt partition WAS the issue. What I did was wipe mpt in Qfil then reflash everything and it finally booted.
Just an FYI for anyone flashing blindly like me: double check which partition is highlighted in blue before flashing! Lol

Congrats your imei is still there ?

Baijoosharma said:
Congrats your imei is still there ?
Click to expand...
Click to collapse
Yes, everything working well. I'm currently on evolution x now

damprobot said:
Yes, everything working well. I'm currently on evolution x now
Click to expand...
Click to collapse
same issues i faced but lost imei strange

damprobot said:
I fixed my issue. Turns out my mpt partition WAS the issue. What I did was wipe mpt in Qfil then reflash everything and it finally booted.
Just an FYI for anyone flashing blindly like me: double check which partition is highlighted in blue before flashing! Lol
Click to expand...
Click to collapse
would you pls tell that what is mpt partotions. and what if the partitions is blue then whats the case? and what to look at. and 2nd i also unbrick ny phone using 9008 method eith 11g dzextracted. i was then flashed my own stock of eaw but my dual sim phone was now showing single sim. after that i flash many kdzs but no success.