im super worried right now, this is my only phone and really need it these days, thing is i tried to flash a kdz to my phone with lg up 1.14 and worked, everything was fine, but it had a may 2019 security patch and didnt want to update via OTA, so i downloaded a more recent kdz and did the same, but now with LG UP 1.15, thing is, this time, when it was supposed to reboot and show a circle that says "erasing" it stayed off.
now it doesnt react to anything, not even the volume down+power or the volume up and conecting to acces download mode it stays at a blank screen with no reaction, not even a vibration.
however, when changing ports, it stared installing a divice, however it said this:
qusb_bulk_cid:0402 _sn:c9aaeafb is set up and ready to go
i sherched and this appears to be a qualcomm brick, please tell me i can recover my phone.
someone help me quick please
ok, i installed qualcomm drivers and now my phone is detected as hs usb qdloader 9008 (COM9), which indeed is a qualcomm brick.
does anyone knows what to do next?
I think you can flash with qfil but I don't have much knowledge about that, sorry ... I hope someone who knows about it will help you soon
Ricky Almonte said:
I think you can flash with qfil but I don't have much knowledge about that, sorry ... I hope someone who knows about it will help you soon
Click to expand...
Click to collapse
yeah, i read that, got the files, even the firehose and did it. but now i have a new problem, im still brick but now my phone cant be recognice, every time it is conected the only thing it happens is the led blinking red, which i read it is the worst possible outcome. (im sure i did the qfile process correctly, i did it very carfully and only after reading like 6 posts so that i could be well informed.... it got quite techy)
why!! :crying::crying:
i read that mostly happens to the t mobile version of the phone, but mine is the cannadian one, i dont get it.
can someone now help me with this red blinking led?? i read a lot but the only thing i found is that ill need to open my phone and use the test points to access qualcomm mode, but it doesnt say more, i dont know where to begin:crying:
did u flash on lgup via cmd or via GUI? if gui, u picked refurbish or other command? Some guys erase their imei mac etc picking other commands in the gui (dl partition is safe), making their smartphone become a thing made of hardware with no identity.
manuhuelva said:
did u flash on lgup via cmd or via GUI? if gui, u picked refurbish or other command? Some guys erase their imei mac etc picking other commands in the gui (dl partition is safe), making their smartphone become a thing made of hardware with no identity.
Click to expand...
Click to collapse
mmmm... i used the lgup version 1.13 via GUI, for my first time, i used refurbish since it was the default, it worked fine.
when i downloaded a more recent kdf for my second install, i also downloaded the version 1.14 for the lgup, i tried to acces the gui like normal but didnt work since it asked me to log in, so i read i could also do it via CMD, so i used CMD for my second test.
Thats when my phone began intalling like normal, but in the reboot section of the install, it turned off to never turn on again
ThePanhead said:
mmmm... i used the lgup version 1.13 via GUI, for my first time, i used refurbish since it was the default, it worked fine.
when i downloaded a more recent kdf for my second install, i also downloaded the version 1.14 for the lgup, i tried to acces the gui like normal but didnt work since it asked me to log in, so i read i could also do it via CMD, so i used CMD for my second test.
Thats when my phone began intalling like normal, but in the reboot section of the install, it turned off to never turn on again
Click to expand...
Click to collapse
I hope u could resolve it. try other lgup versions. If u cant go download mode, hold vol- and power with plugged usb to pc and when the phone restarts u have to release too fast the buttons and hold vol+ until u get into download mode.
Hi, so my phone boots to lg g7 thinq splash screen and gets stuck there. I have a PM flashed to 11g. I can access download mode, edl, fastboot, and I can access all partitions in qfil. Can anyone send a copy of their mpt partition? I think I overwrote it on accident. Thanks.
Try this method...
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
Reyklein said:
Try this method...
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
Click to expand...
Click to collapse
I'm currently trying that out now. Can you backup your mpt partition in qfil so I can download it? Thank you.
I was actually successful in using qfil to flash but sadly it still isn't enough to fix my problem. It still stays stuck at "lg g7 thinq" splash screen. Also lost access to fastboot.
damprobot said:
I was actually successful in using qfil to flash but sadly it still isn't enough to fix my problem. It still stays stuck at "lg g7 thinq" splash screen. Also lost access to fastboot.
Click to expand...
Click to collapse
In edl mode load xml file 0 and again edl mode load xml1 ......... Repaet till xml6
Baijoosharma said:
In edl mode load xml file 0 and again edl mode load xml1 ......... Repaet till xml6
Click to expand...
Click to collapse
I flashed them one by one this time and still it won't boot completely. If anyone can share their mpt partition from qfil it'd be much appreciated.
damprobot said:
I flashed them one by one this time and still it won't boot completely. If anyone can share their mpt partition from qfil it'd be much appreciated.
Click to expand...
Click to collapse
This is the only option i did it in 4 days repeat and repeat thats it r u usung same ezdextrat file attached in thread ir your own extracted files ? Doenload from here and repeat 0123456 untill monile turn on you will loss imei
I know I'm doing it correctly, as you can see in my screenshot above. The extracted files are not what I need. I need mpt partition, which isn't part of the kdz.
In other words, I messed up a partition the kdz won't fix.
I fixed my issue. Turns out my mpt partition WAS the issue. What I did was wipe mpt in Qfil then reflash everything and it finally booted.
Just an FYI for anyone flashing blindly like me: double check which partition is highlighted in blue before flashing! Lol
Congrats your imei is still there ?
Baijoosharma said:
Congrats your imei is still there ?
Click to expand...
Click to collapse
Yes, everything working well. I'm currently on evolution x now
damprobot said:
Yes, everything working well. I'm currently on evolution x now
Click to expand...
Click to collapse
same issues i faced but lost imei strange
damprobot said:
I fixed my issue. Turns out my mpt partition WAS the issue. What I did was wipe mpt in Qfil then reflash everything and it finally booted.
Just an FYI for anyone flashing blindly like me: double check which partition is highlighted in blue before flashing! Lol
Click to expand...
Click to collapse
would you pls tell that what is mpt partotions. and what if the partitions is blue then whats the case? and what to look at. and 2nd i also unbrick ny phone using 9008 method eith 11g dzextracted. i was then flashed my own stock of eaw but my dual sim phone was now showing single sim. after that i flash many kdzs but no success.
Related
Hello all,
Well, it's here... Unfortunately my phone got bricked last night
Can't boot into main screen and can't go to download mode anymore. The cause is, my phone was stuck when upgrading firmware and there's nothing to do about it except remove the battery, and then, BOOM!... "Secure Booting Error! Cause: boot certification verify"
Any LG G3 users here already experienced this problem?
I followed the solution on LG G2 sub-forum, but my ubuntu doesn't detect the port, although Windows recognized it.
If this happens to your G3 and you solved it, please share your experience
Thanks
haris182 said:
Hello all,
Well, it's here... Unfortunately my phone got bricked last night
Can't boot into main screen and can't go to download mode anymore. The cause is, my phone was stuck when upgrading firmware and there's nothing to do about it except remove the battery, and then, BOOM!... "Secure Booting Error! Cause: boot certification verify"
Any LG G3 users here already experienced this problem?
I followed the solution on LG G2 sub-forum, but my ubuntu doesn't detect the port, although Windows recognized it.
If this happens to your G3 and you solved it, please share your experience
Thanks
Click to expand...
Click to collapse
Help me too
haris182 said:
Hello all,
Well, it's here... Unfortunately my phone got bricked last night
Can't boot into main screen and can't go to download mode anymore. The cause is, my phone was stuck when upgrading firmware and there's nothing to do about it except remove the battery, and then, BOOM!... "Secure Booting Error! Cause: boot certification verify"
Any LG G3 users here already experienced this problem?
I followed the solution on LG G2 sub-forum, but my ubuntu doesn't detect the port, although Windows recognized it.
If this happens to your G3 and you solved it, please share your experience
Thanks
Click to expand...
Click to collapse
If Windows recognizes it then try using LGflashtool again.
Sent from my LG-D851 using Tapatalk
Skizzy034 said:
If Windows recognizes it then try using LGflashtool again.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Windows does not recognize the phone...
Skizzy034 said:
If Windows recognizes it then try using LGflashtool again.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Not at all.
Finally, I claimed my warranty with LG, and the motherboard got replaced.
It's all working now
You could have unbricked it... I've done that twice already
im stuck in this, how?
I'm stuck at the same thing since yesterday.
could you tell us the solution @nofait?
I've been researching about this and noticed one thing,
if I hold the lg combo (vol up + usb cable), and keep holding it until it passes the secure boot error and the screen becomes black,
my device (d855) goes to the Qualcomm Download Mode (it's detected as ''Qualcomm HS-USB QDLoader 9008'' on windows 8.1 x64)
Apparently, on that mode we could use Qualcomm tools (QPST) to reflash the bootloader and the matching laf image (the one that brings up the download mode)
so we could then flash any KDZ using LG Flash Tool.
To do so we need to extract the bootloader files, sbl1.bin, aboot.bin, rpm.bin, tz.bin, boot.bin, and laf.bin, from a tot/kdz firmware converting them to mbn format.
Then using QPST eMMC Download Tool, we load the partition table xml and 2 image files: the flash programmer file and the qcom boot image, which I'm still trying to figure out where to get them since I can't dump my own phone, and then we might be able to recover it.
I'm still looking into it and hopefully we can find a way.
I did not send my phone to lg service, yet, because I think they will take too long to fix it.
It happened to me a few days ago, but i had TWRP fully working so i could simply flash a ROM and then recover my things.
That thing about windows recognizing it as a msm8474 was a drivers issue (al least for me), i have a S5 too, i think that when i was tryng to get Heimdall working it changed the drivers (as you may know, s5 and g3 have the same board), so i just simply uninstalled it and then reinstall everything using .exe files from LG's website, after that windows 8.1 recognize it perfectly and i could flash KDZ without problems.
Other experience i had and that may help is what happened to me using an LGOG, couldn't boot, no recovery, no nothing, just trying to turn it on, it managed to get in fastboot mode (but with screen off and red LED all the time),from that point it was just about typing commands and flashing img to get it working
diego-ch said:
I'm stuck at the same thing since yesterday.
could you tell us the solution @nofait?
I've been researching about this and noticed one thing,
if I hold the lg combo (vol up + usb cable), and keep holding it until it passes the secure boot error and the screen becomes black,
my device (d855) goes to the Qualcomm Download Mode (it's detected as ''Qualcomm HS-USB QDLoader 9008'' on windows 8.1 x64)
Apparently, on that mode we could use Qualcomm tools (QPST) to reflash the bootloader and the matching laf image (the one that brings up the download mode)
so we could then flash any KDZ using LG Flash Tool.
To do so we need to extract the bootloader files, sbl1.bin, aboot.bin, rpm.bin, tz.bin, boot.bin, and laf.bin, from a tot/kdz firmware converting them to mbn format.
Then using QPST eMMC Download Tool, we load the partition table xml and 2 image files: the flash programmer file and the qcom boot image, which I'm still trying to figure out where to get them since I can't dump my own phone, and then we might be able to recover it.
I'm still looking into it and hopefully we can find a way.
I did not send my phone to lg service, yet, because I think they will take too long to fix it.
Click to expand...
Click to collapse
Hi,
You'll need to use a Windows 7 machine and the proper LG USB Driver (first post of this message) and change it to the COM41.
Do a BOARD DL and when the screen comes up and tells you to not touch it, ignore and press OK. Then press the power button and at the same type touch the "Normal +power". It should reboot and everything should be fine
Cheers!
nofait said:
Hi,
You'll need to use a Windows 7 machine and the proper LG USB Driver (first post of this message) and change it to the COM41.
Do a BOARD DL and when the screen comes up and tells you to not touch it, ignore and press OK. Then press the power button and at the same type touch the "Normal +power". It should reboot and everything should be fine
Cheers!
Click to expand...
Click to collapse
So,
Should I use windows 7 32 bit or is it fine with 64 bit?
Will I need a .TOT file and a DLL for my model ( D855P 16gb ) or can I use a KDZ file?
EDIT: ok so I tried it, but flash tool failed to get model information from the phone.
were you in download mode? I can't get to download mode here.
diego-ch said:
So,
Should I use windows 7 32 bit or is it fine with 64 bit?
Will I need a .TOT file and a DLL for my model ( D855P 16gb ) or can I use a KDZ file?
EDIT: ok so I tried it, but flash tool failed to get model information from the phone.
were you in download mode? I can't get to download mode here.
Click to expand...
Click to collapse
I send my phone to warranty service, where they changed all the motherboard with new IMEI and SN.
Hope that they don't ask for money to repair the phone.
hi all, having this problem as well. anyone resolve this?? Need help!
[/COLOR]
nofait said:
Hi,
You'll need to use a Windows 7 machine and the proper LG USB Driver (first post of this message) and change it to the COM41.
Do a BOARD DL and when the screen comes up and tells you to not touch it, ignore and press OK. Then press the power button and at the same type touch the "Normal +power". It should reboot and everything should be fine
Cheers! .
Click to expand...
Click to collapse
hi thanks for idea but could you explain in detail because is not working on my end. what screen comes up? i get ready in com41 . then download fail! (0 sec)
---------- Post added at 11:29 AM ---------- Previous post was at 11:26 AM ----------
paolotheking said:
I send my phone to warranty service, where they changed all the motherboard with new IMEI and SN.
Hope that they don't ask for money to repair the phone.
Click to expand...
Click to collapse
did you get it back?
prana_Sky said:
did you get it back?
Click to expand...
Click to collapse
Yes, with new mainboard.
prana_Sky said:
hi all, having this problem as well. anyone resolve this?? Need help!
Click to expand...
Click to collapse
I have the same problem did you find any solution ?
edit: solved somehow
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Haven't really got much to say in the way of helping you mate, sounds like you're in a real Pickle :/
I'm sure someone here has a solution, there'd surely be SOME way to resolve it, we've got some pretty talented devs that do some amazing stuff so someone should be able to help ya somewhere.
All the best man, if you need help we're here
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Are you sure you have no recovery access by Power+Vol—
jac10000 said:
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Click to expand...
Click to collapse
I will try as soon as possible and let you know if anything happens!
itsbighead said:
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Click to expand...
Click to collapse
I will keep that in mind as well thank you!
jac10000 said:
Are you sure you have no recovery access by Power+Vol—
Click to expand...
Click to collapse
Yes im sure! my phone is completely dead and the only sign of life as i said is when the driver gets installed on the computer when i plug it in.. Thank you for your reply though.
Try LG mobile support tool (old version) : http://tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe
Even if you have not download mode, you can try. Install the tool
Try to boot on download mode, you have error message
run LG mobile support tool
choose Additional functions then Upgrade of the recovery after error
At one moment the tool will say that there is not of g3 connected, reattempts starting in download mode or presses on the button to power. Try several times both.
If it work, the software is going to download the last one kdz available for your device and him(it) to fall in love by following
You can always try this solution, with a little luck ...
I have tried all your suggestions but i still have no luck..i tried the tot method as well and it comes up with an error message of 'download fails'..there must be some way to fix this!!im left with the driver AndroidNet being installed on the computer and a phone that cannot enter recovery or download mode. however i can hear the phone working on the inside if i listen closely..if you have any other suggestions please share!
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
HELP
PeterGeorgiou said:
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
Click to expand...
Click to collapse
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
li545044579 said:
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
Click to expand...
Click to collapse
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
PeterGeorgiou said:
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Click to expand...
Click to collapse
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Same Problem
PeterGeorgiou said:
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
Click to expand...
Click to collapse
Hi friend, yeah, that was low battery screen pop out. Doesn't help after you charge you phone. And also, i getting theLGE AndroidNet USB driver just like you. i still keep searching up for solution. Hope it can fix it as soon as possible. I am so thankful for your suggestion. Thank you
573v3 said:
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Click to expand...
Click to collapse
thank you for your post but the link is dead..also my phone cannot be recognized in order to use fasttboot. :/
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
li545044579 said:
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
Click to expand...
Click to collapse
Nothing yet..im still searching and trying every possible method there is but no luck
PeterGeorgiou said:
Nothing yet..im still searching and trying every possible method there is but no luck
Click to expand...
Click to collapse
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Don't get it with >>>>Open terminal in ubuntu then type: do i open terminal in computer or in the phone. If open in the phone, its impossible because the problem we had right now is when we connect the phone with PC, the only thing show up on computer is LGE AndroidNet USB Serial Port. but our phone screen still off even the system is boot in.
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
PeterGeorgiou said:
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
Click to expand...
Click to collapse
Here the same method on Windows : http://forum.xda-developers.com/lg-g2/general/choise-unbrick-qhsusbbulk-qualcomm-9006-t3093844
Yes if you can establish a connection between the phone with the Terminal (linux) or AOMEI Partition Assistant (windows) , you can flash the partitions (aboot, boot, laf) to have after download mode and then apply a kdz
other method ... http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
and can be ... : http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Hi guys,
i recently use layers for my xenonhd rom (lg f400LL)
and then i reboot then boom it goes bootloop
what i have to do?i hardbrick my phone recently and i fix that by doing the shorwire method
but rightnow i use LGUP but it says that:
http://imgur.com/KTK9Vrb
i can still access download mode but i have problems on accessing the twrp recovery because it always boot on the bootloop,i mean
i have problems on using hardware keys to access twrp.
Sir pls help me
Stiffmeistro said:
Hi guys,
i recently use layers for my xenonhd rom (lg f400LL)
and then i reboot then boom it goes bootloop
what i have to do?i hardbrick my phone recently and i fix that by doing the shorwire method
but rightnow i use LGUP but it says that:
http://imgur.com/KTK9Vrb
i can still access download mode but i have problems on accessing the twrp recovery because it always boot on the bootloop,i mean
i have problems on using hardware keys to access twrp.
Sir pls help me
Click to expand...
Click to collapse
I didn't had the same issue as you, but had a similiar one (phone didn't get discovered neither by LGUP nor LG Flash Tool). Yesterday I fixed it by following this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
In particular the part where you change your device to COM41 in the device manager.
After you get it discovered by LG Flash Tool flash an official KDZ.
Reboot the phone and connect it to your Windows, allow the connection from the phone screen.
It should promt you to install drivers on the computer, do that (they are different from LG Drivers you download from the web mind you)
Now you can change your COM port back to 3 and everything should be fully discoverable by both LGUP and LG Flash Tool.
I think I replied to you on reddit (same photo) Have you tried plugging the phone in while in download mode ? Did you try installing drivers from the internet ? Coz thats how I fixed the same problem you have.
Fluffywolf said:
I think I replied to you on reddit (same photo) Have you tried plugging the phone in while in download mode ? Did you try installing drivers from the internet ? Coz thats how I fixed the same problem you have.
Click to expand...
Click to collapse
engmia said:
I didn't had the same issue as you, but had a similiar one (phone didn't get discovered neither by LGUP nor LG Flash Tool). Yesterday I fixed it by following this guide:
http://forum.xda-developers.com/showthread.php?t=2785089
In particular the part where you change your device to COM41 in the device manager.
After you get it discovered by LG Flash Tool flash an official KDZ.
Reboot the phone and connect it to your Windows, allow the connection from the phone screen.
It should promt you to install drivers on the computer, do that (they are different from LG Drivers you download from the web mind you)
Now you can change your COM port back to 3 and everything should be fully discoverable by both LGUP and LG Flash Tool.
Click to expand...
Click to collapse
Hey Bro'ssss
now i am stuck on the recovery
i always flash the rom but when i boot it always go to the recovery(twrp)
Stiffmeistro said:
Hey Bro'ssss
now i am stuck on the recovery
i always flash the rom but when i boot it always go to the recovery(twrp)
Click to expand...
Click to collapse
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
engmia said:
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
Click to expand...
Click to collapse
Thanks man its all ok now
i dont have time to explained what i did but it works
Many thanks to all of you
hey guys, LGUP will not see my phone at all(LGV10) its in download mode , but does not come up. its stuck on LG boot screen and wont go past it. any help would be appreciated... I am, or was rooted anyway, and trying to reflash again. need to in order to fix it now. thanx
1SouthernCanuck said:
hey guys, LGUP will not see my phone at all(LGV10) its in download mode , but does not come up. its stuck on LG boot screen and wont go past it. any help would be appreciated... I am, or was rooted anyway, and trying to reflash again. need to in order to fix it now. thanx
Click to expand...
Click to collapse
Just read over the thread, it's what it's here for.
Stiffmeistro said:
i dont have time to explained what i did but it works
Click to expand...
Click to collapse
You asked for other people's time to help you, but now you don't have time to explain how you made it work?
Yeah... there MIGHT be other people with the same problem, but why would you care to share.
What an as*hole you are. Another typical new buttuser ruining a great dev community.
exactly
leandeganis said:
You asked for other people's time to help you, but now you don't have time to explain how you made it work?
Yeah... there MIGHT be other people with the same problem, but why would you care to share.
What an as*hole you are. Another typical new buttuser ruining a great dev community.
Click to expand...
Click to collapse
Exactly, here I am running around in circles over this BOOST Stylo 2, just got it with MM 6.0.1 out of the box 2 days ago. I caught the 454.4mb update it has been trying to do! Got that baby downloaded! 1.02gb unzipped and renamed to kdz. Got a script for Terminal that will replace Kingroot's temp root with SuperSU but I am not going to attempt any further until I know LGUP will recognize and flash my .zip the bas****s deem not worth enough to put up for download on LG's site!
I got LGUP to recognize it in download mode, reads out LGLS775 but still says it cannot open it...............
His info on how he got it to work would prolly have solved this dillema..............
oh well
zach
ok had a LG G3 that's done this- as long as you can get download mode it should recover, YOU need to use the LG mobile support tool from LG website ( LG UP sees phone as unknown model ) run LG mobile Support tool and in option choose UPGRADE RECOVERY . follow instructions and allow to start process, it took 57 minutes to repair my phone - it will seem frozen anywhere from 0% to about 22% JUST WAIT IT OUT!! lg up / twrp flashes in 5 to 10 mins -- the LG m.s.t writes block by block and takes 1 hour +
so hints and info took 3 goes to find and start upgrade recovery - error on a couple of attempts. phone seems frozen around 10% and 15% of firmware upload -- go make a coffee drink it, go pee then come back and worry! A watched pot never boils!....
Stiffmeistro said:
Thanks man its all ok now
i dont have time to explained what i did but it works
Many thanks to all of you
Click to expand...
Click to collapse
please tell me how to solved your problem my D682 deivce is always opening on recovery but there is no recovery menu just android robot
I have same issue as op described .After unbrick my g3 f400s by short wire method i get error at 94% in tot method and red screen show these word error wrong qem =0 .After remove and put battery again mobile runing but without baseband and null imei .Plz help i need really help
Same here. LGUP Says it is not recognized, even if it says it's a LG G3 855... Trying the LG Mobile Support Tools -> UPGRADE RECOVERY using my Model/serial.
Downloading right now...
Hope it works.
I will tell you when/if I got it to work
Also: Stiffmeistro you're a ****...
---------- Post added at 03:33 AM ---------- Previous post was at 03:22 AM ----------
Sedado77 said:
Same here. LGUP Says it is not recognized, even if it says it's a LG G3 855... Trying the LG Mobile Support Tools -> UPGRADE RECOVERY using my Model/serial.
Downloading right now...
Hope it works.
I will tell you when/if I got it to work
Also: Stiffmeistro you're a ****...
Click to expand...
Click to collapse
It didn't. It's EVEN MORE broken :'(
I figured out how to get my PC to recognize my D851. Apparently all the LG software didn't like how many COM ports I have. As soon as I unplugged everything else from my PC, the software worked. In this case, it was LG Flash Tool 2014, but I couldn't get any of them to work before.
Try running LGUP as Admin!!! For me it worked!
Try running LGUP as Admin!!! For me it worked!
Thankx Bro Its Work
engmia said:
The method I'm describing uses Download Mode so it should work for you.. Try it and tell us the result
Click to expand...
Click to collapse
Hope someone can help me. I flashed a rom for a d855, d855g30 I think, and although I can access download mode all aps for flashing fail saying it's the wrong model number. Even the generic DLL file cant trick it. It still starts booting the rom but boot loops before entering. I no longer have twrp and when I try to do safe mode or factory reset I get a boot validation error or something similar. Just seem to be stuck. Im using a VS985.
One cause of LGUP "UNKNOWN"
While an old thread, it'll be found in searches. For anybody who gets "UNKNOWN" device with LGUP for the LG G3, I found that LGUP for the G3 is often distributed with the wrong DLL file. See the details here, post #11. After installing LGUP, make sure that the "model" subdirectory in the LGUP program directory is the same number as the processor in your phone, in my case c:\Program Files (x86)\LG Electronics\LGUP\model\8974 (was 8994 with the "LGUP for G3" I downloaded).
HTH
Hello community members,
TL;DR no adb, no fastboot, no flashmode, no QDloader (or similar) ... how to unbrick it?
I was trying to force Android to allow lower lcd backlight brightness levels by patching framework-res.apk and I had the edited zip file ready to flash. Then I realized that my Android 7 Ressurection remix ROM (thread) flashed Cyanogenmod recovery, which I don't like. So I decided to reflash TWRP 3.0.2 (link) ( edit: using "fastboot flash boot twrp.img", which was almost fatal mistake) and it has gone almost well. The phone started to boot into recovery mode everytime (and took a long time doing so). So I googled a bit and found this thread which lead me to this thread. I was looking forward to seeing my display brightness at lower than default values, so I probably skipped some security checks and texts with red color, so I flashed the zip with the boot.img replaced. After flashing I chose reboot and nothing happened since.
The problem is I flashed something that was not for my device (extracted boot.img to wrong mmcblk). The command that bricked my phone is (from META-INF/com/google/android/updater-script):
Code:
package_extract_file("boot.img", "/dev/block/mmcblk0p6");
After that it doesn't boot, doesn't light up LED (even when charging), doesn't get detected by PC in any state.
So I have no adb, no fastboot and no flashmode and not even a QDloader or similar mode.
Is there a way to unbrick it?
EDIT: How to unbrick it using JTAG interface? If I find somebody that has the required equipment, what data do I need to give them?
Hey there! Did you manage to solve the issue, because I just got into the same situation after the zip didn't save the corrected partitions but the initial ones... So i ended up without any signs of life in my phone
valkata752 said:
Hey there! Did you manage to solve the issue, because I just got into the same situation after the zip didn't save the corrected partitions but the initial ones... So i ended up without any signs of life in my phone
Click to expand...
Click to collapse
Nope, I found no solution ... even some kind of Qualcomm flashing mode via COM (serial port over USB) does not show up nowhere. I gave up and bought a used S5 mini, which is full of features I appreciate.
I'm gonna keep this Xperia M for some time if some solution comes up.
hi , can you boot into recovery ? ..if yes, i can maybe help
olibub said:
hi , can you boot into recovery ? ..if yes, i can maybe help
Click to expand...
Click to collapse
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
mik13ST said:
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
Click to expand...
Click to collapse
:/ this will be a problem... try look here http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
and find this article "Unbrick any android device with Once Click Unbrick tool"
mik13ST said:
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
Click to expand...
Click to collapse
can you still access fastboot mode? anyway you need to know first what is exactly partition that you overwrite with boot.img :/
. That was really critical -_-
olibub said:
:/ this will be a problem... try look here http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
and find this article "Unbrick any android device with Once Click Unbrick tool"
Click to expand...
Click to collapse
Nice looking tutorial, but I cannot find any download link for that One Click Unbrick Tool in that article. I doubt it would work, they are not explaining what it does.
Nicklas Van Dam said:
can you still access fastboot mode? anyway you need to know first what is exactly partition that you overwrite with boot.img :/
. That was really critical -_-
Click to expand...
Click to collapse
No, as I said. The partition that got overwritten was /dev/block/mmcblk0p6. It was overwritten by boot.img from LG OPTIMUS 3D that I link to in the main post.
here you can download unbrick tool https://forum.xda-developers.com/showthread.php?t=1153310
olibub said:
here you can download unbrick tool https://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
I don't think this has any chance that it will work.
"This Software:
Will work on all Samsung devices which use Odin3"
Do you know how to use Flashtool?
If so, did you already attempt flashing a ftf via Flashmode (Hold VolDown)?
PhoenixTwoFive said:
Do you know how to use Flashtool?
If so, did you already attempt flashing a ftf via Flashmode (Hold VolDown)?
Click to expand...
Click to collapse
I know what Flashtool is. I know what ftf is. I used it once I think.
But the phone does not boot into flashmode as I mention in the main post.
Hi guys!
I tried to put the android 10 korean beta on my LG G7 ThinQ g710TM T-Mobile, and now it doesn't turn on, the laptop recognizes it as QUALCOMM 9008 MODE I just need to know if its trash already or there's a way that can unbrick the phone (really stupid I know)
Thank you in advance!
If the phone wasn't a T-Mobile:
May be able to flash v35.eng img onto the phone's abl_a partition (make sure this is backed up), then use fastboot commands to copy over the laf_a/_b files of the stock img. Then use download mode to revert back to Android 8/oreo.
May need to use, fastboot boot laf.img, to get onto download mode, as suggested here.
It was a t mobile damn never go for a t mobile again REALLY
paxar331 said:
If the phone wasn't a T-Mobile:
May be able to flash v35.eng img onto the phone's abl_a partition (make sure this is backed up), then use fastboot commands to copy over the laf_a/_b files of the stock img. Then use download mode to revert back to Android 8/oreo.
May need to use, fastboot boot laf.img, to get onto download mode, as suggested here.
Click to expand...
Click to collapse
It was a t mobile damn never go for a t mobile again REALLY
Pocketjam347 said:
It was a t mobile damn never go for a t mobile again REALLY
Click to expand...
Click to collapse
You can try my method to fix it?
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
I
I don't understand one part
Awesomeslayerg said:
You can try my method to fix it?
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
I
Click to expand...
Click to collapse
I tried this method 2 days ago but for some reason when I try STEP 7: It says "Extracting kdz to ..." so I tried to wait a WHILE but after 4 hours of wait nothing happened so I was unable to do the next steps
Does it matter if the Phyton says that it was the end of its life?
Thank you so much for your post tho I believe you helped other people
Don't throw it away, I think there's a fix with QFIL.
I'm having a similar problem, but in my case I managed to accidentally erase laf_b from QFIL and this has corrupted my GPT. Now the QFIL partitioner can't see my partitions. Can you help? I may need a flat pack or something? I'm stuck in 9008 mode. The bootloader was unlocked but I couldn't get into fastboot to install TWRP and Lineage OS, so I ended up trying to erase laf_a and laf_b like it says to do in the V40 Qfil guide. Big mistake. Qfil and windows both recognize it as a 9008 device on Com3, but can't access the partitions.
I got the phone from a friend and i'm in the same position. The method from Awesomeslayerg just gives me sahara error
THE KHAMELEON said:
I got the phone from a friend and i'm in the same position. The method from Awesomeslayerg just gives me sahara error
Click to expand...
Click to collapse
See the FAQ in that guide.
Restart edl when connected to qfil or try different USB port or different PC.
lefttobleed said:
See the FAQ in that guide.
Restart edl when connected to qfil or try different USB port or different PC.
Click to expand...
Click to collapse
I don't have another PC to try it on. I been trying other ports and nothing. As I use my tweezers to put the phone in EDL I press download and still the error.
I don't know if this phone is T-Mobile or not. The IMEI shows T-Mobile but inside the phone shows numbers for Verizon
THE KHAMELEON said:
I don't have another PC to try it on. I been trying other ports and nothing. As I use my tweezers to put the phone in EDL I press download and still the error.
I don't know if this phone is T-Mobile or not. The IMEI shows T-Mobile but inside the phone shows numbers for Verizon
Click to expand...
Click to collapse
Not sure what's wrong with your phone...
Once I got out of this error by quickly pressing download when phone enters edl. Need to be fast.
Try that.
lefttobleed said:
Not sure what's wrong with your phone...
Once I got out of this error by quickly pressing download when phone enters edl. Need to be fast.
Try that.
Click to expand...
Click to collapse
To be honest I think it could be me just having the files in the wrong place or something else I'm doing wrong. All I get is Sahara error
Pocketjam347 said:
Hi guys!
I tried to put the android 10 korean beta on my LG G7 ThinQ g710TM T-Mobile, and now it doesn't turn on, the laptop recognizes it as QUALCOMM 9008 MODE I just need to know if its trash already or there's a way that can unbrick the phone (really stupid I know)
Thank you in advance!
Click to expand...
Click to collapse
Same problem with my phone.
I also try these things.
If you solved that problem then please share with me.