Hello,
I would like to know if there is a way to achieve this behaviour:
Once my HD is connected to my car through bluetooth, the radio swith to bluetooth when a call is incoming. After, the car switch back to the radio. I would like to have this behavious with vocal annoucement in igo8. But i don't know if it's possible.
At this moment, i'm only able to switch my car headset to bluetooth audio all the time.
Here are the details
Honda Odessey 2013
OnePlus One 64GB, running 11.0-XNPH33R and franco kernel r16
Android Wear 1.0.1.1379611
Google Play Service 5.0.89 (1307510-038)
Google Search 3.6.14.1337016.arm
Moto 360 4.4W.1/KGW42N
Without Moto 360/Android Wear, my phone will pair with the car just fine
I can listen to audio (streaming from Tunein Radio)
I can make voice call, and the call will go through car speaker
With Moto 360/Android Wear, my phone will pair with the car just fine
I can still listen to audio (streaming from Tunein Radio)
However, when I make a voice call on my phone, the audio does not go through car speaker
Phone is still connected via bluetooth
On the dialer, there's an icon for directing audio to headset, speaker, or bluetooth. bluetooth option is not dimmed, but I can't select it either
In short, when Moto 360 is paired to the phone, voice call audio only go through phone speaker
As a test, while I am still on the call, with audio going through phone speaker, I goto Android Wear, and disconnect Moto 360. 5 seconds later, voice call audio go through car speaker!
Does anyone have experience with moto 360 and bluetooth voice call over car speake?
I hope this is a bug, and not a feature!
animefans said:
Here are the details
Honda Odessey 2013
OnePlus One 64GB, running 11.0-XNPH33R and franco kernel r16
Android Wear 1.0.1.1379611
Google Play Service 5.0.89 (1307510-038)
Google Search 3.6.14.1337016.arm
Moto 360 4.4W.1/KGW42N
Without Moto 360/Android Wear, my phone will pair with the car just fine
I can listen to audio (streaming from Tunein Radio)
I can make voice call, and the call will go through car speaker
With Moto 360/Android Wear, my phone will pair with the car just fine
I can still listen to audio (streaming from Tunein Radio)
However, when I make a voice call on my phone, the audio does not go through car speaker
Phone is still connected via bluetooth
On the dialer, there's an icon for directing audio to headset, speaker, or bluetooth. bluetooth option is not dimmed, but I can't select it either
In short, when Moto 360 is paired to the phone, voice call audio only go through phone speaker
As a test, while I am still on the call, with audio going through phone speaker, I goto Android Wear, and disconnect Moto 360. 5 seconds later, voice call audio go through car speaker!
Does anyone have experience with moto 360 and bluetooth voice call over car speake?
I hope this is a bug, and not a feature!
Click to expand...
Click to collapse
I have the same exact issue but with a Bluetooth earpiece, the voice call audio will not go through my BT earpiece. I've missed many important calls due to this. It's almost as if the voice audio is being rerouted to the watch!
Same issue
I have the exact same issue. It is with my wife's car, a 2014 MAzda CX-5 and also occasionally in my Nissan LEAF. It bothers me.
Same here with my 2014 Genesis.
For those replying to the OP, you might want to list your phone too, not just your car, since it's more likely the phone that's the issue.
On my Nexus 5, I don't see this issue with my 2004 Acura, nor with my wife's 2014 Jeep. I've received and made calls in both vehicles just fine, although, I will say that I haven't had much luck using the 360 to place the call. It always seems to fail to find the right person, or simply fail to understand my command at all.
I'm having similar issues with my G3 and BMW M4.... If my phone and the watch are connected, the car will *usually* connect normallyl... but if I make a call, the call usually goes fine for a while but then all of a sudden the car will lose the connection randomly. This did not happen before I had the watch. If i disconnect the watch from the phone, the car phone picks right back up and works normally. There have also been a few times where the phone and the car have not automatically paired now that I have the watch. Any fixes? Is there a way to prioritize bluetooth to the car connection? I did notice that one time when my call got kicked off the carphone was when a message was coming through.
Recently my watch started to interfere with my car's Bluetooth audio. I have an iPhone 6S and Infiniti Q50, when a call is paced or received via the OEM BT and the watch has BT turned ON the car audio is heavily distorted. The only solution is to put the watch in airplane mode or to shut it off.
Has anyone run into this?
Hey Guys - I have a Moto360 1st Gen.
Longer story short:
I have my phone paired via BT to my watch, and also to my Cars bluetooth Audio. If im driving in the car and also have my watch on and I receive a call, the in-car bluetooth will notify me and i will answer the call via the car. However any Audio for the call routes through the watch and not the cars audio, AKA i cant hear them and they cant hear me. When I turn my watch off, Obviously, the Cars Bluetooth works fine -- But when both are paired at the same time, my car receives and sends no audio, the watch gets it first.
Is there any way whatsoever I can turn this feature off, so my car gets audio and not the watch? Ive tried a few things and nothing seems to work - other then old school turning my watch off manually when i get in the car and turning it on when i get out of the car
I never turn off my phone and the Bluetooth on it. I have 3 Bluetooth devices:
car stereo - immediately connects after turning on the car
Redmi Airdots TWS headset - immediately connects after turning on the headset
Amazfit Bip watch - can't connect when turning on the watch
The problem is only with the watch, and I can't figure out why. When I'm not using my watch, I turn it off for the night, and turn it back on in the morning. Previously I had a Redmi Note 5 with Android 8 AOSP custom ROM, and as soon as I turned on the watch, the BT connection icon on the watch came back in seconds. However on the A70, when I turn on the watch, it won't connect, not even after 10 minutes. I have to manually turn on and off the Bluetooth on the phone, and then it connects. What could be the problem?
It worked with my other phone fine previously, and I did reset my watch when switching to the A70, so I don't believe it's the watch's fault.