Hello,
I would like to know if there is a way to achieve this behaviour:
Once my HD is connected to my car through bluetooth, the radio swith to bluetooth when a call is incoming. After, the car switch back to the radio. I would like to have this behavious with vocal annoucement in igo8. But i don't know if it's possible.
At this moment, i'm only able to switch my car headset to bluetooth audio all the time.
Related
does anyone know if you can send the google navigation voice over BT to a BT speaker/car kit?
Yep, works for me - it interrupts any music you may be playing from the phone.
And how do you do it? I have a Nokia Bluetooth carkit which works fine for phone calls but I don't know how I can play music or have the navigation voice speaking through the car speakers?
@thewebface
What make of car kit do you have thewebface? I suspect a lot of the bluetooth features depend on the carkit.
thanks
LM
It's an original Nokia CK-7W.
I've got a Motorola T505 bluetooth carkit / FM transmitter and Desire does work fine with it for both navigation and music. Out of the box configuration, no parameter setup needed.
The feature I liked most was that I could set up individual volume levels for each application running in parallel (i.e. max volume for calls, 2/3 for navigation, 1/3 for music) and then control the general volume from the car stereo.
I've got Bluetooth built in to my car, will this do the same thing?
Didn't even know you could do that! I bought Co-Pilot, is it possible with that too?
Would be great if it was as at the moment Im using Front Aux on the head unit which is cutting out all the music!
Has anyone else paired a headset to their slide and had media audio come through it?
I paired my old jawbone2 to my slide and when I was playing a game, game audio came through the ear piece. It only happened ONCE and now everything (except calls and the genius button) is back to the phone speaker.
Is that normal? Should audio be routed through my BT Headset like that? I was pretty certain only calls should go through to a non a2dp device.
I don't know anything about the jawbone2, but I have no problems. For regular phone use, I have a Motorola H500 and I always play Pandora in the car, and have never had music come through the H500, just voice like it should be. (I've used the H500 on the G1 I ordered on launch day, on a Motorola Droid, a Sprint EVO 4G, and the 3G Slide on a variety of stock and non-stock ROMs.) I also have a Motorola S9 A2DP headset, and the audio works as you would expect on it also on all of those devices. Maybe the Slide detects the Jawbone2 in a funky way somehow. What does it say when you go to Settings->Wireless & Networks->Bluetooth Settings->Jawbone2 (press & hold then select options.) If it's not a A2DP headset, it should just say "Phone, Use for phone audio." An A2DP headset will also say "Media, use for media audio." If you are lucky, the phone is just detecting it wrong and you can uncheck the Media option.
It only did it once and then went back to acting like a normal BT headset.
I am going to chalk it up as a fluke from initial pairing.
And under options it says phone audio only which is ok.
I'm replacing it with a Jawbone Icon tomorrow which supports a2dp and a whole slew of other nifty features for a single ear headset.
Don't deal with much bluetooth headsets but i do hook it up to my car stereo and i know there are settings in the bluetooth of that specific device. have you had a chance to look in there?
Bluetooth Pairing problems
I have similar problems when pairing to my truck stereo. It auto pairs when I get into the truck and works perfectly well the first time I make a call. But after that it doesnt disconnect properly AND it will disconnect but will stay paired.
I am able to go into BT setting and have it reconnect.
Works once then bam not connected again.
I have Android version 2.3.3
Baseband 47.3201.35.06U_7.07.35.025
Kernel 2.6.32.17 -Cyanogenmod-g501281a
Mem Info
183MB /418MB
Build GRI40
Connecting to a Kenwood Receiver
DNX9140
It worked fine for my Nexus Not sure why this is happening.
Thanks
Hi!,
I have a HTC Touch Pro 2 that I usually pair, via bluetooth, with my car. When this connection is made, a message shows up on the HTC’s screen informing that the connection does not assure some sound functions. Nevertheless, all the phone functions work great.
The problem is the gps. I bought a few days ago the gps software NDrive v10, and after a few tests I realised that when the HTC is paired with the car, there is no sound from the NDrive. I open NDrive and I can’t hear a single instruction!
The solution is turning off the bluetooth so I can hear the instructions from the NDrive, but this way I have no handsfree system for the phone…
Is there any way of solving this problem, having the HTC paired with the car, and at the same time, hearing the instructions from the NDrive?
Thanks!
MM
Are you pairing both Hands-free and Stereo BT profiles when you connect to the car? Maybe that program requires the Stereo profile to route sound through your system. Otherwise, only phone functions will be routed. My phone automatically pairs the Hands-free profile when I get in the car, but if I want to stream music from the phone to my car stereo I have to manually start the Stereo BT profile.
when you mentioned the car's BT profile I went and check the car menus, and I found one (that I missed previously) that gives the option of listening to the sounds from the HTC. Whether it is music or gps!
But I still have a small question. When the menu that I mentioned above is select I can only listen to sounds from the HTC. This means that when I'm listening to the gps I can't hear radio or cd player from the car...
Nevertheless, thanks for the help!
MM
On the HTC you can pair the phone and the stereo. If you disable the stereo on the HTC, that may get you what you are after.
marcom said:
when you mentioned the car's BT profile I went and check the car menus, and I found one (that I missed previously) that gives the option of listening to the sounds from the HTC. Whether it is music or gps!
But I still have a small question. When the menu that I mentioned above is select I can only listen to sounds from the HTC. This means that when I'm listening to the gps I can't hear radio or cd player from the car...
Nevertheless, thanks for the help!
MM
Click to expand...
Click to collapse
That's because the radio can only have one input active at a time, and when the phone is connec ted via BT in stereo mode, that's all it can handle. It doesn't matter if you're streaming music or GPS directions from the phone.
Hi,
I have several bluetooth questions.
1. On my old TP2, once paired with BT in my car, as long as I would leave phone bluetooth on, it would auto connect every time I started my car. Nothing had to be done unless I reset the phone or turn BT off.
With ET4G, I have to manually go to BT settings and clique on my car BT to have it paired every single time I get into my car. Is that the way it works for everyone or is there a problem? It finds the car BT when I start the car, but does not auto pair.
2. I know officially Skype and Gtalk do not support BT audio out. Is there a way around? I use those apps to video chat while on the road, and on highway, speakerphone is too weak. Besides, it is located on the back of the phone, right against the windshield holder. Any ideas???
Thanks.
Mike
My BT connects every time I start my car or truck. I have a Pioneer Navigation Radio in the Car and Ford Sync in the Truck. BT has been pretty good for me so far. If you have not done so, maybe try and un-pair and re-pair it and see if that helps.
No problem here with car BT connecting automatically.
If you want Skype BT, use this: http://forum.xda-developers.com/showthread.php?t=1148708 (bonus: you can turn off annoying start up/exit sound)
I've looked in the phone but haven't found out if it's possible. I have a Bluetooth head unit in my car (Pioneer AVH-P8400BH) and am wondering if it's possible to have apps (specifically Navigation) have the audio output through the phone instead of the HU. I use an ipod for music and as such as soon as I'm in the car I can't hear the nav prompts unless I have the HU set to bluetooth audio.