Car Bluetooth Audio Garbled when watch is ON - Huawei Watch

Recently my watch started to interfere with my car's Bluetooth audio. I have an iPhone 6S and Infiniti Q50, when a call is paced or received via the OEM BT and the watch has BT turned ON the car audio is heavily distorted. The only solution is to put the watch in airplane mode or to shut it off.
Has anyone run into this?

Related

Can't use speaker phone with G Watch Connected

Hey everyone, I can't seem to use my speaker phone when i have my watch connected with my phone. i have to turn off bluetooth to listen to music over my speakers. anyway to turn off bluetooth audio streaming?

voice call issue when paired with moto360 and car

Here are the details
Honda Odessey 2013
OnePlus One 64GB, running 11.0-XNPH33R and franco kernel r16
Android Wear 1.0.1.1379611
Google Play Service 5.0.89 (1307510-038)
Google Search 3.6.14.1337016.arm
Moto 360 4.4W.1/KGW42N
Without Moto 360/Android Wear, my phone will pair with the car just fine
I can listen to audio (streaming from Tunein Radio)
I can make voice call, and the call will go through car speaker
With Moto 360/Android Wear, my phone will pair with the car just fine
I can still listen to audio (streaming from Tunein Radio)
However, when I make a voice call on my phone, the audio does not go through car speaker
Phone is still connected via bluetooth
On the dialer, there's an icon for directing audio to headset, speaker, or bluetooth. bluetooth option is not dimmed, but I can't select it either
In short, when Moto 360 is paired to the phone, voice call audio only go through phone speaker
As a test, while I am still on the call, with audio going through phone speaker, I goto Android Wear, and disconnect Moto 360. 5 seconds later, voice call audio go through car speaker!
Does anyone have experience with moto 360 and bluetooth voice call over car speake?
I hope this is a bug, and not a feature!
animefans said:
Here are the details
Honda Odessey 2013
OnePlus One 64GB, running 11.0-XNPH33R and franco kernel r16
Android Wear 1.0.1.1379611
Google Play Service 5.0.89 (1307510-038)
Google Search 3.6.14.1337016.arm
Moto 360 4.4W.1/KGW42N
Without Moto 360/Android Wear, my phone will pair with the car just fine
I can listen to audio (streaming from Tunein Radio)
I can make voice call, and the call will go through car speaker
With Moto 360/Android Wear, my phone will pair with the car just fine
I can still listen to audio (streaming from Tunein Radio)
However, when I make a voice call on my phone, the audio does not go through car speaker
Phone is still connected via bluetooth
On the dialer, there's an icon for directing audio to headset, speaker, or bluetooth. bluetooth option is not dimmed, but I can't select it either
In short, when Moto 360 is paired to the phone, voice call audio only go through phone speaker
As a test, while I am still on the call, with audio going through phone speaker, I goto Android Wear, and disconnect Moto 360. 5 seconds later, voice call audio go through car speaker!
Does anyone have experience with moto 360 and bluetooth voice call over car speake?
I hope this is a bug, and not a feature!
Click to expand...
Click to collapse
I have the same exact issue but with a Bluetooth earpiece, the voice call audio will not go through my BT earpiece. I've missed many important calls due to this. It's almost as if the voice audio is being rerouted to the watch!
Same issue
I have the exact same issue. It is with my wife's car, a 2014 MAzda CX-5 and also occasionally in my Nissan LEAF. It bothers me.
Same here with my 2014 Genesis.
For those replying to the OP, you might want to list your phone too, not just your car, since it's more likely the phone that's the issue.
On my Nexus 5, I don't see this issue with my 2004 Acura, nor with my wife's 2014 Jeep. I've received and made calls in both vehicles just fine, although, I will say that I haven't had much luck using the 360 to place the call. It always seems to fail to find the right person, or simply fail to understand my command at all.
I'm having similar issues with my G3 and BMW M4.... If my phone and the watch are connected, the car will *usually* connect normallyl... but if I make a call, the call usually goes fine for a while but then all of a sudden the car will lose the connection randomly. This did not happen before I had the watch. If i disconnect the watch from the phone, the car phone picks right back up and works normally. There have also been a few times where the phone and the car have not automatically paired now that I have the watch. Any fixes? Is there a way to prioritize bluetooth to the car connection? I did notice that one time when my call got kicked off the carphone was when a message was coming through.

Moto360 - One Feature Driving Me Insane

Hey Guys - I have a Moto360 1st Gen.
Longer story short:
I have my phone paired via BT to my watch, and also to my Cars bluetooth Audio. If im driving in the car and also have my watch on and I receive a call, the in-car bluetooth will notify me and i will answer the call via the car. However any Audio for the call routes through the watch and not the cars audio, AKA i cant hear them and they cant hear me. When I turn my watch off, Obviously, the Cars Bluetooth works fine -- But when both are paired at the same time, my car receives and sends no audio, the watch gets it first.
Is there any way whatsoever I can turn this feature off, so my car gets audio and not the watch? Ive tried a few things and nothing seems to work - other then old school turning my watch off manually when i get in the car and turning it on when i get out of the car

Car Bluetooth multimedia audio

Hi,
I just bought this watch, and I have a problem with my car Bluetooth connection.
The problem is that when I enter the car, the multimedia audio is set to car speaker, even if in the Bluetooth properties I disabled multimedia audio for this connection because I want that the audio remains on the phone.
Before this watch, I had an Android Wear watch and the car Bluetooth connection worked fine, the audio remained on the phone.
Since I have this watch the audio goes to the car speakers. If I enable and disable again the multimedia audio for the car connection properties then the audio correctly remains on the phone, but I have to do this every time.
Someone knows how I can make the audio remain on the phone?

HELP: Galaxy Watch Active 2, Doesn't Route Calls to Synced Bluetooth Headset

Hello,
Please help me to solve this, otherwise this Watch thing is useless for my needs.
I have Watch Active 2 LTE [dont use LTE, nor have eSim on my current provider, got it since it was almost same price and had more RAM]
The watch synced with BT to ROG Phone 2.
I have Bluetooth headset that synced to Watch 2, i copied my Aduoibooks to the watch and listen to them from the watch, it works but low volume.
In Watch BT settings the Call Audio and Media Audio is ENABLED
BUT the moment I call to someone from my watch or someone calls me, I get Audio trough Watch speaker and watch microphone used as input.
When I open Bluetooth settings [during the call] the Call Audio and Media Audio automatically got disabled, and it stays disabled until i finish the call and press PLAY on the music player.
Maybe this is NORMAL and smart watches dont route call audio to Bluetooth headsets since audio goes from the phone to the watch and from the watch to the headset?
I tested bunch of different headsets, its all the same behavior
Please help, Thanks
Guy's anyone? Is it even possible?

Categories

Resources