Hi,
I just bought this watch, and I have a problem with my car Bluetooth connection.
The problem is that when I enter the car, the multimedia audio is set to car speaker, even if in the Bluetooth properties I disabled multimedia audio for this connection because I want that the audio remains on the phone.
Before this watch, I had an Android Wear watch and the car Bluetooth connection worked fine, the audio remained on the phone.
Since I have this watch the audio goes to the car speakers. If I enable and disable again the multimedia audio for the car connection properties then the audio correctly remains on the phone, but I have to do this every time.
Someone knows how I can make the audio remain on the phone?
Related
A2DP Blueooth Car Stereo won't reconnect to mobile
I have the Pioneer DEH-P9800BT Bluetooth Head Unit in my car, which supports stereo BT music streaming from any A2DP device.
I also have the HTC TyTN II Mobile which supports the same.
I have paired the two devices, and on the initial pairing successfully played music from the HTC through the Pioneer. When that worked, the BT Audio icon appears in the title bar of the mobile (headphones with a musical note in the middle).
However, after switching off the car and later returning, I have 2 issues:
1) It is impossible to reconnect the BT stereo music playback, unless I delete the Pioneer device from the list of BT devices within the mobile phone, then pair them again. Nothing else seems to work. Simply, I just want all music to be routed through the Pioneer whenever it is in range of the mobile.
2) I have set the mobile phone as "Phone 1" in the Pioneer, and have enabled "Auto Connect", yet it does not auto connect. Every time I get in the car I have to manually scroll to Telephone>Function>Connect Phone>Phone 1. You can imagine what a laborious pain that is compared to my previous 5 year old Nokia Bluetooth Car Kit which just auto-connects whenever my mobile is in range.
Are you able to solve either problem?
Im having the same problems with my sony DR-BT10CX and Moto HT820 whenever i turned either devices off. But whenever i turned them back on, i usually uncheck and recheck the headset whenever i want to use A2DP. It's a pain but i never had to re-pair my device with my tilt.
Try unchecking/checking the bluetooth device instead of re-pairing them (although in your case, its a PITA).
Have you tried updating the firmware on the Pioneer (if its possible anyways).
I have an ATT Tilt w/ the my customized HTC rom. But my JVC BT1 never has any problem to reconnect to my phone.
1) I found a program called A2DPToggle which provides an on/off button on the home page to solve this
2) I found I have to leave the phone in 'visible' Bluetooth mode for auto-connect to work. Less secure, but solves the problem
While this may not help, while messing with my Audio linking between my pda and pc , The PC BT adaptor would freeze if I tried to stream an AAC file or a non mp3 file. It would play it for 10-15 seconds then freeze. I imagine not all mp3
s are created equal for BT purposes either.
Is there any sort of app that can redirect phone calls through a2dp. I can get a gadget that will allow me to contorol my media player and stream music over bt to an iphone dock but I also need to calls to come throuhg those speaker. A microphone isnt a problem as the phone has one that will work fine. What I need to do is have phone calls,if an a2dp device is present and connected use that instead of the phones speaker. Otherwise I have to go buy a BT radio for my car. (which comes with an ipod dock but no bt)
you might could just use an auxiliary input to get just the audio out. Pretty sure you can't use a2dp for phone calls.
Sent from my PC36100 using XDA App
If the BT device has the headset profile you should be able to receive calls on it, many BT enabled car stereos and BT headphones are able to carry A2DP, AVCR and the headset profile.
I want the same for my Blackberry A2DP gateway in car
I have a blacberry A2DP gateway in my car that connects ipads, htc phone and iphone to the stereo input of my car sound system. The sound quality is excellent for all uses but the incoming phone calls are routed via the phone internal speaker unless I plug a second stereo cable into the car input jack.
Can I get htc hd2 windows mobile 6.5 phone mono into this gateway device to avoid having to connect a stereo cable to my phone output? It connects to the HTC as stereo audio only.
fenixjn said:
If the BT device has the headset profile you should be able to receive calls on it, many BT enabled car stereos and BT headphones are able to carry A2DP, AVCR and the headset profile.
Click to expand...
Click to collapse
So in other words,the answer is no,there IS no such app. As I said,I can buy a gadget that will connect A2DP to a I-Pod interface. It does NOT have headset profile.
Hi
I'm just wondering what would happen if I have the phone playing podcasts through the car stereo, but also connect a Bluetooth headset? Will I just get the audio through both the car speakers and the headset?
I don't particularly want to listen just on the headset, but I need it in case of calls on a long journey sometimes!
It's probably going to depend on the particulars, what Bluetooth profiles they use, etc.
In my situation, I have my GNexus plugged into my Car Stereo with an audio cable, and Podcasts, etc. play through it just fine.
I have a visor-mounted Blueant S4 device paired to the phone. When a call comes in, my GNexus actually pauses the Podcast, and the phone call is routed through my Blueant S4, just as I would like it. When the call ends, the Podcast resumes, playing through my car stereo.
Works just perfectly for me, but I imagine the behavior will vary depending on the particular hardware, profiles used, etc.
Hmmm.... maybe I need a visor-mounted system, then... especially given my headset hurts my ear after about half an hour anyway!
!!11oneone said:
Hi
I'm just wondering what would happen if I have the phone playing podcasts through the car stereo, but also connect a Bluetooth headset? Will I just get the audio through both the car speakers and the headset?
I don't particularly want to listen just on the headset, but I need it in case of calls on a long journey sometimes!
Click to expand...
Click to collapse
You can define what profile the device uses, Media and/or Phone audio. Just untick Phone on the stereo if it auto pairs that way and allow the headset to connect to phone. The actual audio content is routed to the appropriate stream.
Sorry if I was unclear. The phone would be connected to the car stereo via headphone, not Bluetooth...
I've looked in the phone but haven't found out if it's possible. I have a Bluetooth head unit in my car (Pioneer AVH-P8400BH) and am wondering if it's possible to have apps (specifically Navigation) have the audio output through the phone instead of the HU. I use an ipod for music and as such as soon as I'm in the car I can't hear the nav prompts unless I have the HU set to bluetooth audio.
Not sure if this has been covered or not, but I recently found that a cheap AUX cable plugged into my headphone jack and into my car AUX jack didn't produce any music through my car speakers
The car "recognized" the phone and went into AUX mode, but the phone didn't recognize the car and produced sound from the phne external speaker.
I found some threads somewhere that talked about cables and impedance, but I found an easy fix: Force headset mode.
There seem to be lots of apps that will toggle your phone to force it in and out of headset mode. I picked one at random from the googleplay store which allowed me to create a widget that toggles forced headset on and off (toggleheadset2 by ddubtech.com).
I also use a Garmin Nuvi 660 as a bluetooth speaker.
When my phone is connected to the Nuvi via bluetooth I can make and receive calls through the Nuvi. When I toggle the forced headset mode on and plug into the car AUX port, I can listen to music using the car audio.
I wasn't sure what would happen if you had somthing plugged into the headset jack of the phone, but also had a bluetooth connection to a mic and speakers (the Nuvi). Turns out they work together smoothly; music through AUX pauses when an incomming call starts, then switches automatically to the Nuvi mic and speakers for the duration of the call, then automatically switches back to playing music through the car AUX audio.