I wanted to install the Pyxis OS ROM which needs kernel 4.4 and I read that you need to install ZUI 2.5 / 3.5 to get the kernel. I installed 3.5 two times and for nothing, when I try to install the Pyxis ROM I get a bluescreen. I flashed a baseband which I found on the forum for the ROMs with 4.4 kernel but it also didn't work. Could someone tell me the steps to install properly the ZUI so I can get the kernel ? I installed the ZUI ROM with TWRP because with QFIL I can't select any port to install and I couldn't figure it out how to resolve it.
VladAlex1956 said:
I wanted to install the Pyxis OS ROM which needs kernel 4.4 and I read that you need to install ZUI 2.5 / 3.5 to get the kernel. I installed 3.5 two times and for nothing, when I try to install the Pyxis ROM I get a bluescreen. I flashed a baseband which I found on the forum for the ROMs with 4.4 kernel but it also didn't work. Could someone tell me the steps to install properly the ZUI so I can get the kernel ? I installed the ZUI ROM with TWRP because with QFIL I can't select any port to install and I couldn't figure it out how to resolve it.
Click to expand...
Click to collapse
Qfil zui 1.9 then use update.zip to update to zui 3.5 and the ln OTA update to 4.0.199.. then u have latest bootloader and baseband .. then u can flash 4.4 kernels and ROM
sanjay.2704 said:
Qfil zui 1.9 then use update.zip to update to zui 3.5 and the ln OTA update to 4.0.199.. then u have latest bootloader and baseband .. then u can flash 4.4 kernels and ROM
Click to expand...
Click to collapse
Like I said, I can't use qfil because it doesn't see any port when I try to flash, so can I flash zui 1.9 through twrp?
VladAlex1956 said:
Like I said, I can't use qfil because it doesn't see any port when I try to flash, so can I flash zui 1.9 through twrp?
Click to expand...
Click to collapse
Have you installed all the required drivers and minimal fastboot and ADB?
If you have then uninstall all drivers.. re- install .. then go to developer section and revoke all permission for usb debugging.. connect phone .. select mtp .. open minimal fastboot and check if device is recognised.. then go to fastboot mode.. once device in fastboot open qfil . Device SHLD be visible there
sanjay.2704 said:
Have you installed all the required drivers and minimal fastboot and ADB?
Click to expand...
Click to collapse
I have minimal fastboot, ADB and the drivers for the phone but I can't install the Qualcomm drivers for some reasons, I tried many times and nothing. I guess that's why I don't see any ports in qfil.
VladAlex1956 said:
I have minimal fastboot, ADB and the drivers for the phone but I can't install the Qualcomm drivers for some reasons, I tried many times and nothing. I guess that's why I don't see any ports in qfil.
Click to expand...
Click to collapse
Try installing in this sequence.. uninstall all related drivers.. minimal fastboot.. zuk drivers etc . If you are on windows then disable signature verification and antivirus.. then install the Qualcomm drivers first. Check kuber Sharma guide in guides section.. then install zuk driver and then minimal fastboot and ADB.. u can also use all in one toolbox to status check for all..
sanjay.2704 said:
Qfil zui 1.9 then use update.zip to update to zui 3.5 and the ln OTA update to 4.0.199.. then u have latest bootloader and baseband .. then u can flash 4.4 kernels and ROM
Click to expand...
Click to collapse
Where do I get this update.zip?
After bricking my phone, I'm finally on ZUI_3.1.117_ST_171110_qpst. Can I simply flash this update.zip to be able to do OTA updates?
Thank you!
oliversum said:
Where do I get this update.zip?
After bricking my phone, I'm finally on ZUI_3.1.117_ST_171110_qpst. Can I simply flash this update.zip to be able to do OTA updates?
Thank you!
Click to expand...
Click to collapse
If you have not unlocked bootloader then check for system updates.. you should automatically updated to zui 4.0 step by step
sanjay.2704 said:
If you have not unlocked bootloader then check for system updates.. you should automatically updated to zui 4.0 step by step
Click to expand...
Click to collapse
I unlocked the bootloader before installing this rom via qpst, nonetheless I cannot update: "Your system has been root, we are unable to provide the latest version of the system"
oliversum said:
I unlocked the bootloader before installing this rom via qpst, nonetheless I cannot update: "Your system has been root, we are unable to provide the latest version of the system"
Click to expand...
Click to collapse
Update.zip is official OTA update.. it won't work in unlocked bootloader.. if you want to update to zui 4.0 flash 3.5 qpst and OTA update to 4.0
sanjay.2704 said:
Update.zip is official OTA update.. it won't work in unlocked bootloader.. if you want to update to zui 4.0 flash 3.5 qpst and OTA update to 4.0
Click to expand...
Click to collapse
thansk! I will follow this guideline then.
VladAlex1956 said:
I wanted to install the Pyxis OS ROM which needs kernel 4.4 and I read that you need to install ZUI 2.5 / 3.5 to get the kernel. I installed 3.5 two times and for nothing, when I try to install the Pyxis ROM I get a bluescreen. I flashed a baseband which I found on the forum for the ROMs with 4.4 kernel but it also didn't work. Could someone tell me the steps to install properly the ZUI so I can get the kernel ? I installed the ZUI ROM with TWRP because with QFIL I can't select any port to install and I couldn't figure it out how to resolve it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?p=78693170
Z2 Plus cihazımdan Tapatalk kullanılarak gönderildi
Related
Currently it's my daily driver so I don't want to risk bricking the phone. How would I go about doing this?
Latest LineageOS build with TRWP v 3.0.2
551ML Z00A
WhiteOreoCookie said:
Currently it's my daily driver so I don't want to risk bricking the phone. How would I go about doing this?
Latest LineageOS build with TRWP v 3.0.2
Click to expand...
Click to collapse
well when you flashed custom Rom you risked it..
any ways. reboot your device in fastboot mode. if you want to flash MM then flash latest MM bootloader, boot, recovery,fastboot, ifwi. if want to flash LP then LP bootloader.
then reboot to recovery mode factory reset and sideload the firmware for which you flashed bootloader..
you haven't mentioned your device model number.
sukhwant717 said:
you haven't mentioned your device model number.
Click to expand...
Click to collapse
Forgot to mention its a z00ad model
WhiteOreoCookie said:
Forgot to mention its a z00ad model
Click to expand...
Click to collapse
you want to flash stock marshmallow or lolipop?
please guide me, currently using P8 lite having MM.
i am going to install LineageOS.
how i can go back to stock firmware? i have not stock firmware flashable.zip, just have update.app downloaded from Huawei.
sukhwant717 said:
you want to flash stock marshmallow or lolipop?
Click to expand...
Click to collapse
Sorry for the late reply. I want to flash stock marshmallow.
p8 lite dual sim, stock MM B185C525.
About Stock MM
hello，my zenfone ze551ml might be going to upgrade to mm 6.0， please tell me is it marshmallow stock rom camera better than 5.0？ is it 6.0 have setting sd card become internal storage？ is it 6.0 have mass big storage not just mtp when connected to pc ？
Hello from Fred for i prefer 5.x even 7.x(low bar command added on os) camera is the same and between different 5.,x i had tried no problem to connect with pc after i don t specially use mtp.
As u want
curtis91 said:
Hello from Fred for i prefer 5.x even 7.x(low bar command added on os) camera is the same and between different 5.,x i had tried no problem to connect with pc after i don t specially use mtp.
As u want
Click to expand...
Click to collapse
thank u friend，how about mm or 7.0 is it default can set sd card to internal storage？
Sent from my Lenovo K860i using xda premium
Hi, I need help about relock bootloader and restoring stock rom with QFIL, basically I need to go back to full stock to enable VoLTE.
I read in many threads to flash a version prior to the ZUI 3.5 with QFIL and next to flash the 3.5 version with QFIL, why?
Why I need to flash a previous version than 3.5 QFIL? Can I flash directly the 3.5 QFIL file?
Thank you.
-totonio- said:
Hi, I need help about relock bootloader and restoring stock rom with QFIL, basically I need to go back to full stock to enable VoLTE.
I read in many threads to flash a version prior to the ZUI 3.5 with QFIL and next to flash the 3.5 version with QFIL, why?
Why I need to flash a previous version than 3.5 QFIL? Can I flash directly the 3.5 QFIL file?
Thank you.
Click to expand...
Click to collapse
because 3.5 qfil not available???
PrincE.. said:
because 3.5 qfil not available???
Click to expand...
Click to collapse
what is this?
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/oreo-zuio3-5-099dev-z2-t3719682
Here I see a 3.5 QFIL(QPST) and in the instructions is written to flash 2.5 previous, why?
If you did this already, have you flashed 2.5 first?
-totonio- said:
what is this?
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/oreo-zuio3-5-099dev-z2-t3719682
Here I see a 3.5 QFIL(QPST) and in the instructions is written to flash 2.5 previous, why?
If you did this already, have you flashed 2.5 first?
Click to expand...
Click to collapse
this is Not the stable version, actually its a ota Of dev version but flashable with qpst if you directly flash this version your device will not boot or you may bricked your device.
PrincE.. said:
this is Not the stable version, actually its a ota Of dev version but flashable with qpst if you directly flash this version your device will not boot or you may bricked your device.
Click to expand...
Click to collapse
Oh, now I undestrand, so in my case I just need to install 2.5 and next re-unlock and flash a TWRP (I guess).
Many thanks
For going back to stock, following is what I do.
1. Flashing that vendor to factory ZIP for becoming non treble in case I am running AEX or such treble ROM.
2. Flashing 1.9 Chinese ROM first via QFIL
3. Flashing latest Indian (2.5) or Chinese (3.5) via QFIL.
Works for me.
Gives me locked bootloader, stock recovery and ROM. Basically back to bone stock phone.
NaXal said:
For going back to stock, following is what I do.
1. Flashing that vendor to factory ZIP for becoming non treble in case I am running AEX or such treble ROM.
2. Flashing 1.9 Chinese ROM first via QFIL
3. Flashing latest Indian (2.5) or Chinese (3.5) via QFIL.
Works for me.
Gives me locked bootloader, stock recovery and ROM. Basically back to bone stock phone.
Click to expand...
Click to collapse
Yes, you're right, to lock bootloader the 1.9 rom must be flashed first.
And next if you don't want to use QFIL you can install an OTA package directly from phone.
I've unlocked bootloader of my chinese redmi note 5 pro and flashed a global rom on it then updated to global v9.6.3.0, after that I installed twrp thru adb and root with magisk. Now, will I be able to update this to a new global version thru ota?
No. You can not
kotobodj said:
No. You can not
Click to expand...
Click to collapse
Is there a workaround to do so?
You can comeback to recovery stock or download update file to storage , boot to twrp then flash update zip. After update , masgik will not work
kotobodj said:
You can comeback to recovery stock or download update file to storage , boot to twrp then flash update zip. After update , masgik will not work
Click to expand...
Click to collapse
So the official update zip will work on twrp? I thought it's not possible on a custom recovery. Anyway I'll try that, thanks.
Work fine. But if you flash full rom , not update pack, all data will be earse , mi recovery comeback.
I had unlocked the bootloader and then, flashed global stable, but unfortunately, the mtp (and by the way, fastboot and adb access from a pc) was somehow disabled, and to complete the disgrace package, i have just the original mi recovery. I'm currently at the lastest global stable rom, 10.2, without any hope. What can i do?
jvictor852 said:
I had unlocked the bootloader and then, flashed global stable, but unfortunately, the mtp (and by the way, fastboot and adb access from a pc) was somehow disabled, and to complete the disgrace package, i have just the original mi recovery. I'm currently at the lastest global stable rom, 10.2, without any hope. What can i do?
Click to expand...
Click to collapse
can you enter fastboot. if so then
flash a fstboot rom same ARB as your last .. using miflash tools.
raptorddd said:
can you enter fastboot. if so then
flash a fstboot rom same ARB as your last .. using miflash tools.
Click to expand...
Click to collapse
No, i can surely enter on fastboot but it wont connect to pc. By the way it just dont works.
is your problem solved? Because I'm also facing this same issue and i have tried almost everything which i could.
I'm on MIUI latest version and I'm trying to downgrade miui verision to 10.2 through OTA updates in order to fix it but it's showing downgrading is not allowed and I'm completely stucked.
Plz if anyone know to solv this out kindly let me know.
As issue says MTP not working i also can't flash TWRP recovery from fastboot and since i'm on stock rom, my phone can't be rooted and i can't edit build.prop file to enable mtp.
Thanks.
TheDeaDKiLLer said:
is your problem solved? Because I'm also facing this same issue and i have tried almost everything which i could.
I'm on MIUI latest version and I'm trying to downgrade miui verision to 10.2 through OTA updates in order to fix it but it's showing downgrading is not allowed and I'm completely stucked.
Plz if anyone know to solv this out kindly let me know.
As issue says MTP not working i also can't flash TWRP recovery from fastboot and since i'm on stock rom, my phone can't be rooted and i can't edit build.prop file to enable mtp.
Thanks.
Click to expand...
Click to collapse
Lol win10 is a bad joke... use usb2.0 hub or search for reg fix on xda forum. Or use win7 or linux.
And there is few versions of fastboot.
Hi there, i need android 10 stock recovery . img file , cant find it anywhere on internet, please post link if someone has extracted from rom? the reason for asking is that i just got my 2nd android 10 Indonesian rom update but i cant update it manually via LR twrp , the update script fails, so i think i can update it via stock recovery.. thanks
you can update it via update center. Go to check for updates in setting and tap to the MIUI logo 3 times. After that click 3 dots on right top select custom update package.
Nihat2003lol said:
you can update it via update center. Go to check for updates in setting and tap to the MIUI logo 3 times. After that click 3 dots on right top select custom update package.
Click to expand...
Click to collapse
thats what i explained, i have LR twrp installed, and its not allowing me to install the update, the update script fails in twrp,, so i need stock recovery for that
n70shan said:
thats what i explained, i have LR twrp installed, and its not allowing me to install the update, the update script fails in twrp,, so i need stock recovery for that
Click to expand...
Click to collapse
Oh sorry for misunderstanding. Download fastboot rom, extract it, and flash recovery.img via platform-tools(command to flash "fastboot flash recovery recovery.img"). I dont know if it will brick ur device or not. Best thing I can say try to flash fastboot rom with Mi Flash Tool(make sure select the clean all option(not the clean all and lock)).
Nihat2003lol said:
Oh sorry for misunderstanding. Download fastboot rom, extract it, and flash recovery.img via platform-tools(command to flash "fastboot flash recovery recovery.img"). I dont know if it will brick ur device or not. Best thing I can say try to flash fastboot rom with Mi Flash Tool(make sure select the clean all option(not the clean all and lock)).
Click to expand...
Click to collapse
cant find any fastboot rom for android 10 indonessian
n70shan said:
cant find any fastboot rom for android 10 indonessian
Click to expand...
Click to collapse
https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-note-8-pro-all-miui-firmwares/
Download Indonesian 11.0.2 Android 10.
Nihat2003lol said:
https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-note-8-pro-all-miui-firmwares/
Download Indonesian 11.0.2 Android 10.
Click to expand...
Click to collapse
only android 9 fastboot available , android 10 fastboot download links are broken
n70shan said:
Hi there, i need android 10 stock recovery . img file , cant find it anywhere on internet, please post link if someone has extracted from rom? the reason for asking is that i just got my 2nd android 10 Indonesian rom update but i cant update it manually via LR twrp , the update script fails, so i think i can update it via stock recovery.. thanks
Click to expand...
Click to collapse
You can install orange fox recovery because it support ota update and then you never need to worry about ota updates.:laugh:
n70shan said:
Hi there, i need android 10 stock recovery . img file , cant find it anywhere on internet, please post link if someone has extracted from rom? the reason for asking is that i just got my 2nd android 10 Indonesian rom update but i cant update it manually via LR twrp , the update script fails, so i think i can update it via stock recovery.. thanks
Click to expand...
Click to collapse
Download & flash this within LR.TWRP bro: https://bigota.d.miui.com/V11.0.2.0...DGlobal_V11.0.2.0.QGGIDXM_b57de5267e_10.0.zip
https://forum.xda-developers.com/re...tock-recovery-redmi-note-8-pro-t4089033#login
Also check the comments section you will found both Android 9 & 10 stock Recovery of REDMI NOTE 8 PRO Device Indian Varient device .
Rakesh Mahto said:
https://forum.xda-developers.com/re...tock-recovery-redmi-note-8-pro-t4089033#login
Also check the comments section you will found both Android 9 & 10 stock Recovery of REDMI NOTE 8 PRO Device Indian Varient device .
Click to expand...
Click to collapse
is that possible to use stock recovery from indian device for Indonesian device?
.