Related
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
sasadeaunty said:
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
Click to expand...
Click to collapse
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
hi
taaeem said:
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
Click to expand...
Click to collapse
Hi, if i reboot without plug-in the usb, it will also fail like (attached photo124)
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
blueIBI said:
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
Click to expand...
Click to collapse
Different stock recovery only can install certain ROM? I tried B125 already cannot. Any other recommend ROM for me to try? I rmb I flashed a quite latest stock recovery
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
blueIBI said:
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
Click to expand...
Click to collapse
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
sasadeaunty said:
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
Click to expand...
Click to collapse
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
miz_pimp said:
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
hi miz_pimp, if i do not plug in the usb cable, it will directly go into fail as showed in the picture124 i attached below, I do not rmb what firmware i installed previously, but I did a full wipe, I do not think thr is still firmware inside beside stock recovery.
Click to expand...
Click to collapse
blueIBI said:
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
Click to expand...
Click to collapse
I tried with different sdcard without usb plugged in, still giving me fail
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
blueIBI said:
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
Click to expand...
Click to collapse
i cant even flash my recovery, when i use adb, it just shows me waiting for device, then no response. I tried most of the ways but no one can help......
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
blueIBI said:
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
Click to expand...
Click to collapse
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
miz_pimp said:
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Click to expand...
Click to collapse
sasadeaunty said:
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
Click to expand...
Click to collapse
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
miz_pimp said:
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
Click to expand...
Click to collapse
hi miz_pimp, thank you so muchhhhhhhhhhhhh, I am able to recover my p6 with the firmware u linked to me. Really thank you and thanks for others too for helping me too. Thanks all.
Glad you got it sorted, and you're very welcome. [emoji2]
After much suffering this was the only release that corrected the freezes, restarts and the camera after unlocking the bootloader.
Instructions
Download and install the latest Intel Android Device USB Drivers from HERE
Dowload the zip from HERE
Post your Zenfone in fastboot mode
Run the .bat
-------------------------------------------This tool works for all custom roms-------------------------------------------
OBS: This first version only unlock the bootloader, the next I add the flash TWRP recovery in the bat and other bat to lock the bootloader
Can i know someone here who is having the No camera problem,have u tried this ?
By the way,is this method unlock bootloader without No camera problem?
Lokcies said:
Can i know someone here who is having the No camera problem,have u tried this ?
By the way,is this method unlock bootloader without No camera problem?
Click to expand...
Click to collapse
I had this problem and this method worked
awesome, I'll try it
XHook said:
I had this problem and this method worked
Click to expand...
Click to collapse
Bro i am realy excited to hear that,but i don't have the access to download the file,can u please confirm my email ?
wanhasniza******@gmail.com
Lokcies said:
Bro i am realy excited to hear that,but i don't have the access to download the file,can u please confirm my email ?
wanhasniza******@gmail.com
Click to expand...
Click to collapse
updated link, sorry for the mistake
I use the STOCK ROM 0.78 ww
I'm with the unlock bootloader problem even in rom stock.
I lock bootloader again, and then use that?
It only works if you use custom rom? Or also in stock?
Sorry my bad English, I am Brazilian.
Zenfone 5 a501cg - 1.6 Ghz
Victor Soares said:
I use the STOCK ROM 0.78 ww
I'm with the unlock bootloader problem even in rom stock.
I lock bootloader again, and then use that?
It only works if you use custom rom? Or also in stock?
Sorry my bad English, I am Brazilian.
Zenfone 5 a501cg - 1.6 Ghz
Click to expand...
Click to collapse
The bat file it blocks before unlocking is only put in fastboot and run the file without fear.
:laugh:
May i know,if.bin and dnx version u use for this UBL Tools?
Sent from my ASUS_T00J using Tapatalk
XHook said:
The bat file it blocks before unlocking is only put in fastboot and run the file without fear.
:laugh:
Click to expand...
Click to collapse
tried this method but my camera is still doesnt work...how do i get my camera back
still freezing
XHook said:
After much suffering this was the only release that corrected the freezes, restarts and the camera after unlocking the bootloader.
Instructions
Download and install the latest Intel Android Device USB Drivers from HERE
Dowload the zip from HERE
Post your Zenfone in fastboot mode
Run the .bat
-------------------------------------------This tool works for all custom roms-------------------------------------------
OBS: This first version only unlock the bootloader, the next I add the flash TWRP recovery in the bat and other bat to lock the bootloader
Click to expand...
Click to collapse
no working for me, plz fix error
Victor Soares said:
still freezing
Click to expand...
Click to collapse
Same here...
XHook said:
After much suffering this was the only release that corrected the freezes, restarts and the camera after unlocking the bootloader.
Instructions
Download and install the latest Intel Android Device USB Drivers from HERE
Dowload the zip from HERE
Post your Zenfone in fastboot mode
Run the .bat
-------------------------------------------This tool works for all custom roms-------------------------------------------
OBS: This first version only unlock the bootloader, the next I add the flash TWRP recovery in the bat and other bat to lock the bootloader
Click to expand...
Click to collapse
After I used it with Lollipop droidboot ww t00j stock .78 I had problems with camera. It works only with kitkat?
@ XHook
have you worked on method to re-lock bootloader..
bricked my bootloader
After flashing this I couldn't access my fastboot. Now I can't even boot to system. I'm stuck at the USB logo, where usually I could reboot to fastboot (via pressing Power & Vol +) to fix this. But now I can't even access fastboot. When I press Power & Volume Up, it shows a battery icon. Please do help @XHook.
Editted:
Sorry for panicking back there. I forgot the reboot to recovery way using Power & Volume down. At least I can still boot to my system. I'll try to find a DIY solution for this. Sorry for panicking, @XHook.
Your tool uses Fastboot of 4.3 version right? Is that the difference?
no more update? camera not found, can this method by xhook solve the problem?
i've tried this version, but make my bootloader missing/bricked, same with ezrawk post
Note : When I installed this version >> 3.24.40.87 latest stock lollipop firmware
@XHook, tell me what your firmware version when you install this UBL method.
Thanks
ezrawk said:
After flashing this I couldn't access my fastboot. Now I can't even boot to system. I'm stuck at the USB logo, where usually I could reboot to fastboot (via pressing Power & Vol +) to fix this. But now I can't even access fastboot. When I press Power & Volume Up, it shows a battery icon. Please do help @XHook.
Editted:
Sorry for panicking back there. I forgot the reboot to recovery way using Power & Volume down. At least I can still boot to my system. I'll try to find a DIY solution for this. Sorry for panicking, @XHook.
Click to expand...
Click to collapse
I have the same problem. How did you fix it?
serihan said:
I have the same problem. How did you fix it?
Click to expand...
Click to collapse
I was using a custom recovery (TWRP) at that time so I flashed a fastboot via install. If you aren't using a custom recovery, you'd probably want to check this out: Zenfone 5 A500CG, Zenfone 6 A600CG Last chance to debrick (This fix youre IMEI) by swiczak
About the flashable fastboot, try searching for it in the Help & Troubleshooting part, I think the user who upload the flashable fastboot zip was tank0412. Try PM-ing him. Sorry can't help you about this 'cause I forgot where I saved mine.
Goodluck!
My phone has unlocked bootloader, TWRP, and is rooted with magisk. Got the OTA for (global) 9.5.4.0 last night - it downloads/de-crypts ok, reboots into TWRP, and then fails to flash. I also tried to flash manually via TWRP by locating the downloaded file, still fails. During the night, it rebooted itself (to try again I suppose), and my alarm didn't go off.
So here I am, late in work, wasting more "work time" to ask you for a possible solution :angel:
Go back to original miui recovery then you can update your miui successfully. After update,reflash twrp and magisk.
jimandy60 said:
Go back to original miui recovery then you can update your miui successfully. After update,reflash twrp and magisk.
Click to expand...
Click to collapse
Sounds easy, but I don't know how to do that. Could you point me in the right direction?
you can't flash an OTA with TWRP
Flash recovery img with fastboot
Code:
fastboot flash recovery recovery.img
then boot your phone
settings->about phone->system update->update
it will get in origin miui recovery and update system automatically
after update finished,reflash twrp and magisk
Thank you very much @jimandy60
With all the respect though, I would prefer downloading the file from a popular location. Is there any way to find this hosted somewhere else, maybe by Xiaomi?
ang3l said:
Thank you very much @jimandy60
With all the respect though, I would prefer downloading the file from a popular location. Is there any way to find this hosted somewhere else, maybe by Xiaomi?
Click to expand...
Click to collapse
maybe try this site?
en.miui.com
Hello!
I got the same problem but instead to come here and ask for help I tried to solve myself. I downloaded the lastest TWRP version and the device was not going into recovering mode. Then I installed again the previous one without results. I downloaded the TWRP app from Play Store and trying to solve I made wipe data, cache and I am not sure but I think also choose wipe system. Now my phone is stuck on the fastboot screen. Does not start. Using ADB I installed back the stck recovery but the problem remains. Somebody can help me please?
reflash the full rom?
download&unzip full rom package,get in fastboot mode and run flash_all.bat
Check out my guide here:
https://forum.xda-developers.com/mi-mix-2/how-to/guide-mi-mix-2-unroot-restore-recovery-t3770690
It has all the steps and files you will need to go from rooted stock MIUI Nougat to rooted stock MIUI Oreo applying the OTA update
colorado_al said:
Check out my guide here:
https://forum.xda-developers.com/mi-mix-2/how-to/guide-mi-mix-2-unroot-restore-recovery-t3770690
It has all the steps and files you will need to go from rooted stock MIUI Nougat to rooted stock MIUI Oreo applying the OTA update
Click to expand...
Click to collapse
Thanks, I'll take a look.
Hi I was on Pixel Experience ROM then I flashed MIUI 9.5.17 via Recovery TWRP 3.2.2.0 with clean flash (i.e. dalvik cache, data, system and internal storage wiped)
but Now mobile is dead its not even turning on. What should I do please help
Flash lazyflasher.
I think this thread provide a compatible version.
https://forum.xda-developers.com/an...zip-lazyflasher-tool-flashing-custom-t3549210
Or from here: -
https://forum.xda-developers.com/showpost.php?p=76904750&postcount=146
Device Manager is showing this
1
corkiejp said:
Flash lazyflasher.
I think this thread provide a compatible version.
https://forum.xda-developers.com/an...zip-lazyflasher-tool-flashing-custom-t3549210
Or from here: -
https://forum.xda-developers.com/showpost.php?p=76904750&postcount=146
Click to expand...
Click to collapse
Qualcomm HS-USB QDLoader 9008 (COM3)
follow this guide:
https://forum.xda-developers.com/redmi-note-5-pro/how-to/guide-redmi-note-5-pro-unbrick-t3816178
huttui said:
Hi I was on Pixel Experience ROM then I flashed MIUI 9.5.17 via Recovery TWRP 3.2.2.0 with clean flash (i.e. dalvik cache, data, system and internal storage wiped)
but Now mobile is dead its not even turning on. What should I do please help
Click to expand...
Click to collapse
huttui said:
1
Qualcomm HS-USB QDLoader 9008 (COM3)
Click to expand...
Click to collapse
mmhuseyni said:
follow this guide:
https://forum.xda-developers.com/redmi-note-5-pro/how-to/guide-redmi-note-5-pro-unbrick-t3816178
Click to expand...
Click to collapse
He flashed a safe MIUI version, so should have not triggered ARP!
Solution needed
corkiejp said:
He flashed a safe MIUI version, so should have not triggered ARP!
Click to expand...
Click to collapse
Please provide solution asap
huttui said:
1
Qualcomm HS-USB QDLoader 9008 (COM3)
Click to expand...
Click to collapse
I think you are in edl mode right now. You can try to flash the 9.5.17 ROM (use the fastboot ROM, not recovery ROM) with MiFlash tool.
edit: If you are not in edl mode, try to enter fastboot and put this code "fastboot oem edl" to enter edl mode.
Tried it
finsx said:
I think you are in edl mode right now. You can try to flash the 9.5.17 ROM (use the fastboot ROM, not recovery ROM) with MiFlash tool.
edit: If you are not in edl mode, try to enter fastboot and put this code "fastboot oem edl" to enter edl mode.
Click to expand...
Click to collapse
Everytime I flash With MIFLASH Tool i end up with this
I have tried this methods on fastboot rom version 9.5.17, 9.5.14 and global beta 8.7.12
but nothing works results are same
huttui said:
Everytime I flash With MIFLASH Tool i end up with this
I have tried this methods on fastboot rom version 9.5.17, 9.5.14 and global beta 8.7.12
but nothing works results are same
Click to expand...
Click to collapse
Never faced something like that so i looked at google and found some solutions.
1. Try to use test point, flash the ROM.
2. Unplug the battery and charge it with wall charger to get some juices, then plug it again, enter edl, then flash the ROM.
3. Just unplug the battery, enter edl mode, flash the ROM.
4. The worst solution and also the last, take it to the service center, hope they could help you fix your device.
I still have to wait 10 days to unlock bootloader, so i have not tried to enter edl mode with this Whyred yet. Don't know if the edl mode even works in Whyred.
edit:
5. Try to use beta version of MiFlash, because i have tried to unlock bootloader before, the newest version cannot detect my phone, so i used the old one.
6. Use the 64 bit version of windows.
huttui said:
Hi I was on Pixel Experience ROM then I flashed MIUI 9.5.17 via Recovery TWRP 3.2.2.0 with clean flash (i.e. dalvik cache, data, system and internal storage wiped)
but Now mobile is dead its not even turning on. What should I do please help
Click to expand...
Click to collapse
Hii...bro am in exact same situation right now. Did u solve it? Did u find any method to do?
What version of miui you had installed before pixel?
have you flashed any beta versions after 8.7.5 like 8.7.12, 8.7.26, 8.8.2 etc? If yes, then your device has triggered anti rollback and can only be resurrected using authorized mi account or change of motherboard.
EDL mode is disabled in whyred through fastboot command. You'll have to proceed with test point method to enable edl (I've seen in many threads which points to only test point method for edl) and then flash the rom which was there before you flashed PE.
Or, you should take help from service center.
If you can remember ARB3 before PE, then 9.5.17 will work but if you are not sure (like miui used to download the 9.5.19 rom automatically in wifi and a single reboot will upgrade you to ARB4 without your consent and then you wouldn't know it before it's too late and to avoid that, revoking updater authorization in the settings would be the only way to disable downloading ota in wifi ) , then you should flash 9.5.19 otherwise downgrade arb will brick your phone. Also, it s not clear whether you have bricked it while flashing 9.5.17 after PE which was a common reason when people downgraded from 9.5.19 to 9.5.17.
animeshsahood6 said:
Hii...bro am in exact same situation right now. Did u solve it? Did u find any method to do?
Click to expand...
Click to collapse
You have bricked your device by downgrading from arb4 to arb3. go to mi service center to get your mother board replaced as soon as possible..
epicwarlock said:
You have bricked your device by downgrading from arb4 to arb3. go to mi service center to get your mother board replaced as soon as possible..
Click to expand...
Click to collapse
Its covered under warranty r8?
animeshsahood6 said:
Its covered under warranty r8?
Click to expand...
Click to collapse
If you go to xiaomi authorised service centre then it is covered under warranty..
Lucky
animeshsahood6 said:
Hii...bro am in exact same situation right now. Did u solve it? Did u find any method to do?
Click to expand...
Click to collapse
Luckily for me mi service centre replaced the board for free as it was in warranty. try your luck. i told them it stuck during miui10 update.
Hi,
I just tried to root my Mi Max 3 but got bootloop, what can I do?
I unlocked the device.
Then I flashed TWRP 3.2.0. nitrogen, devcie was encrypted then.
I flashed Magisk 18.1., rebooted, but bootloop.
I rebooted into TWRP again and flashed no-verity-opt-encrypt-6.0.zip and again Magisk 18.1 and rebooted, but bootloop only.
I did factory reset but bootloop only.
What am I suposed to do? Any help from you guys?
Thanks you very much !
download and install the latest twrp from nijel8. Make a wipe and install only a clean rom and magisk. Nothing more. It must work.
Tried magisk 18.0?
I use magisk 18.0 and official twrp 3.2.3.0.
Hi,
it didnt help unfortunately.
I think I first need to flash a stock firmware completely right? Then try another round with the suggested versions by you guys.
I downloaded stock ROM from Xiao Mi Website here: http://en.miui.com/a-234.html
It is named: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global
But when I try to flash it via fastboot mode and the help of Xiao Mi Flash Tool I get an error like this (attachment)
Any help?
Update: I just flashed official full rom named: miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip via TWRP and it didnt show any errors (but TWRP still installed, I expected stock revoery actually?!). I wiped cache and rebooted but still bootloop.
I am really not sure what to do now.
Update 2: I now was able to flash stock rom (nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global) via fastboot mode (error like on screenshot didnt appear anymore, dont really know why) now phone is only booting into stock MIUI recovery and shows a red noteification: "This MIUI Version cant be installed on this device" -> Can anybode give me help please?
Update 3: Tried to unlock again but it fails due to my device is not bound to my MI Account, but how to add it to account as I cant boot it up anymore and go to the settings in android. Or do I need another FULL Rom? I read smth that this error (Rom cant be installed on this device) appears if one is trying to flash Global Rom instead of China ROM? Where to get this one? Dont know the difference actually But my phone had google services preinstalled
I now even downloaded the chinese full rom: Mi Max 3 China Stable ROM 10.0.6.0 – V10.0.6.0.OEDCNFH / MIUI 9 / fastboot / Android Oreo because I think maybe this was originally i nstalled (purchased phone in Indonesia which is black market)
but once I try to flash it, the mix flash tool tells me now erase is not allowed in locked mode. I need to unlock first? but how? Unlock bootloader is not possible due to device is not bound with my mi-account.
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
What base it has, china or global when you get it?
tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Edit: sorry, just checked. Not possible to select file from stock mi recovery.
Lecterr said:
What base it has, china or global when you get it?
Click to expand...
Click to collapse
I dont really know. AT least all google services were available. does this mean it has been the global base? I bought this phone in Indonesia were it is not available officially, only through some black market sellers in the malls. Maybe they also have used the chinese versions, unlocked and reflashed the global versions and then they sell it. So maybe it has been the chinese base originally but is sold out with the global version? On the devices backside is a sticker with IMEi, IMEI2, MEID and SN, does this say anything about the version?
bobo9900 said:
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Click to expand...
Click to collapse
I think not, in Stock Recovery which is now installed on the phone I only have Reboot, Wipe Data and Connect MIAssistant
How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..
bobo9900 said:
How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..
Click to expand...
Click to collapse
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.
tobyffm said:
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.
Click to expand...
Click to collapse
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.
bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.
Click to expand...
Click to collapse
bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka cina recovery.
Click to expand...
Click to collapse
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.
tobyffm said:
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.
Click to expand...
Click to collapse
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.
bobo9900 said:
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.
Click to expand...
Click to collapse
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?
tobyffm said:
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?
Click to expand...
Click to collapse
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..
bobo9900 said:
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..
Click to expand...
Click to collapse
Thanks anyway bobo9900 for assisting me. And I should not try to flash a MIUI 9 rom, yeah?
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?
tobyffm said:
Thanks anyway bobo9900 for assisting me.
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?
Click to expand...
Click to collapse
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..
bobo9900 said:
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..
Click to expand...
Click to collapse
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?
tobyffm said:
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?
Click to expand...
Click to collapse
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.
bobo9900 said:
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.
Click to expand...
Click to collapse
OK checked. Through fastboot check of ARB I get:
fastboot getvar anti
getvar:anti FAILED (remote: GetVar Variable Not found)
finished. total time: 0.016s
Wondering again why again an error lol
TRhrough opening flash_all.bat file I see:
CURRENT_ANTI_VER=4
fastboot %
which means I cant downgrade, ya?