Develop Bugs

Remove TWRP

Hello,
I flashed a stock rom for my zenfone 2 Z00A without any problem but because I have installed TWRP on my phone to test out cm12.1 and cm13 I can no longer do the OTA as they come in. I have searched through the forums and have tried to edit the OTA file as described but it always errors and won't install. I did a backup when I first installed TWRP, if I use that recovery file will it bring back my phone to stock or will I still have TWRP? If i will is there a way to remove TWRP and go back to the stock recovery so I can install the OTA's the normal way?
Thank you,
David

use fastboot to install the stock recovery
Sent from my ASUS_Z00A using Tapatalk

Or edit ota to be compatible with TWRP. It's a 30 second procedure.

Thank you, after searching I finally found on asus's own blog a post that had the link to the proper recovery.IMG file. Thank you both for the help. David

dwaldie said:
Thank you, after searching I finally found on asus's own blog a post that had the link to the proper recovery.IMG file. Thank you both for the help. David
Click to expand...
Click to collapse
Hi David. Can you supply the link to the stock rom that you used and the recovery image please?Did you flash anything else besides these two?

Hello,
What I did was;
1) download the latest full firmware from this site http://www.asus-znfone.com/2016/01/full-firmware-zenfone-2-ze551ml-V2.20.40.160.html and installed it using twrp as I would any custom rom.
2) After I went through all the set up I was alerted to a system update. Before I did the update I replaced TWRP with the restore.img from this link
https://mega.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw!Z1N1EbKa using fastboot flash recovery recovery.img command.
3) After rebooting it is possible to do all the OTA updates.
Hope this helps. David Waldie

dwaldie said:
Hello,
What I did was;
1) download the latest full firmware from this site http://www.asus-znfone.com/2016/01/full-firmware-zenfone-2-ze551ml-V2.20.40.160.html and installed it using twrp as I would any custom rom.
2) After I went through all the set up I was alerted to a system update. Before I did the update I replaced TWRP with the restore.img from this link
https://mega.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw!Z1N1EbKa using fastboot flash recovery recovery.img command.
3) After rebooting it is possible to do all the OTA updates.
Hope this helps. David Waldie
Click to expand...
Click to collapse
Thanks for such a quick reply. I'm going to try it later.

DiGecko said:
Or edit ota to be compatible with TWRP. It's a 30 second procedure.
Click to expand...
Click to collapse
Can you tell me the step to edit ota?
Help plz

HTC M8 cannot update to android 6.0. Please Help

Hello,
I have a HTC M8 rooted (Super SU) with TWRP Recovery and Android ver. 5.0.1, Software ver. 4.19.111.4, Baseband ver. 1.25.2145000021.06G_20.68.4196t.01_F.
Last couple of days, I received a notification to update for android 6.0, but after I downloaded the update and press to "install now", the phone always restarted to TWRP recovery and do not install the update. Any Idea Why ?!!!.
Could any one help me to install the update?
Thanks

moh19814 said:
Hello,
I have a HTC M8 rooted (Super SU) with TWRP Recovery and Android ver. 5.0.1, Software ver. 4.19.111.4, Baseband ver. 1.25.2145000021.06G_20.68.4196t.01_F.
Last couple of days, I received a notification to update for android 6.0, but after I downloaded the update and press to "install now", the phone always restarted to TWRP recovery and do not install the update. Any Idea Why ?!!!.
Could any one help me to install the update?
Thanks
Click to expand...
Click to collapse
Replace the recovery to stock recovery and relock the bootloader. If you installed the modified firmware, reflash the stock firmware, you will be good

Cashreedhar said:
Replace the recovery to stock recovery and relock the bootloader. If you installed the modified firmware, reflash the stock firmware, you will be good
Click to expand...
Click to collapse
how to replace recovery with the stock one. Where I can find it.
Do i lose all my application data doing so.
No, I am using the stock firmware, so I suppose no need to reflash it.
Thnaks

moh19814 said:
how to replace recovery with the stock one. Where I can find it.
Do i lose all my application data doing so.
No, I am using the stock firmware, so I suppose no need to reflash it.
Thnaks
Click to expand...
Click to collapse
Here you should find the stock recoveries: http://www.andromods.com/download-files/htc-one-m8-stock-recovery-verizon-sprint-att-tmobile.html
download the right recovery.img file and follow these instruction on how to flash - http://androiding.how/how-to-install-twrp-recovery-via-fastboot/ - in this just change the twrp recovery.img to the one you downloaded and run the code in command prompt.
It is recommended to do I clean install to avoid any further reported errors. Once you relock the bootloader you will lose all the data (like hard reset).

Cashreedhar said:
Here you should find the stock recoveries: http://www.andromods.com/download-files/htc-one-m8-stock-recovery-verizon-sprint-att-tmobile.html
download the right recovery.img file and follow these instruction on how to flash - http://androiding.how/how-to-install-twrp-recovery-via-fastboot/ - in this just change the twrp recovery.img to the one you downloaded and run the code in command prompt.
It is recommended to do I clean install to avoid any further reported errors. Once you relock the bootloader you will lose all the data (like hard reset).
Click to expand...
Click to collapse
Thanks again for the info.
Unfortunately, I could not find the right stock recovery in the link you provided, so I use another one: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860.
However, I have to ask, if I am on stock firmware; only rooted through SuperSU and with TWRP recovery,
do I need to reinstall (reflash) or restore to sotck firmware as in steps # 7 to 9 in the post (link) I added, or
can I directly flash the stock recovery and then relock the bootloder and start downloading the update 6.0
Thank.

moh19814 said:
Thanks again for the info.
Unfortunately, I could not find the right stock recovery in the link you provided, so I use another one: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860.
However, I have to ask, if I am on stock firmware; only rooted through SuperSU and with TWRP recovery,
do I need to reinstall (reflash) or restore to sotck firmware as in steps # 7 to 9 in the post (link) I added, or
can I directly flash the stock recovery and then relock the bootloder and start downloading the update 6.0
Thank.
Click to expand...
Click to collapse
you can directly flash

moh19814 said:
Thanks again for the info.
Unfortunately, I could not find the right stock recovery in the link you provided, so I use another one: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860.
However, I have to ask, if I am on stock firmware; only rooted through SuperSU and with TWRP recovery,
do I need to reinstall (reflash) or restore to sotck firmware as in steps # 7 to 9 in the post (link) I added, or
can I directly flash the stock recovery and then relock the bootloder and start downloading the update 6.0
Thank.
Click to expand...
Click to collapse
First thing .. you cannot do OTA with a rooted stock ROM, you need a non-rooted ROM.
Secondly .. there is no need to relock bootloader - read the note in my thread.
Just read again post #1 and follow all the 14 steps, you should be fine.
Anything, you can ask in my thread as I'm not following your thread.

ckpv5 said:
First thing .. you cannot do OTA with a rooted stock ROM, you need a non-rooted ROM.
Secondly .. there is no need to relock bootloader - read the note in my thread.
Just read again post #1 and follow all the 14 steps, you should be fine.
Anything, you can ask in my thread as I'm not following your thread.
Click to expand...
Click to collapse
thanks a lot for the info

[GUIDE] OTA Update Rootet(Magisk) H6X (Honor 6X)

I had trouble updating my Honor 6X (BLN-L21) after I rooted it, so I searched the whole xda to gain some information. Finally I made it, so I thought I could share this information with you guys, hope it helps, but I do not take responsibility if not, as you may have already heard, the Honor 6X (like every Kirin device) is very easy to brick.
- If everything is gone alright you should keep all of your data, apps and settings.
- If there is a big update, like from MM to N you maybe should backup all your stuff and relock the bootloader to update (big updates can relock frp so you can't unlock your bootloader then a rollback is the only way.
Successfully tried from:
B360 to B365
B365 to B367
Short Version (for expert users):
1. uninstall busybox bynaries and the Xposed Framework
2. uninstall magisk (inside the app)
3. flash stock recovery.img (of your actual firmware)
4. flash stock boot.img (of your actual firmware)
5. make OTA update (Reminder: safe update file)
6. flash twrp again and root
7. you are all done
Detailed Version:
#cmd commands#
1. backup your system over TWRP #adb reboot recovery# and do a backup there (for safety reasons)
2. #fastboot reboot#
3. uninstall busybox bynaries and the Xposed Framework(not just the app) (if you have it)
4. uninstall magisk (in app over "complete Uninstall button")
5. restart to bootloader #adb reboot bootloader#
6. flash stock recovery #fastboot flash recovery recovery.img# [use the recovery out of your actual firmware, how to extract is explained in the Forum I added at the end
7. flash stock boot #fastboot flash boot boot.img# [also use the extracted version of your actual package]
8. #fastboot reboot#
9. download update over OTA Update app (System update) in stock system. -> If the "System updater" app does not provide a Full version of the update package, the update could get stopped at 8% saying it could not verify the update, if so, just take the step to the error and reboot, if you then search for an update again, the "System updater" should now show you a Full version of the update package. like "BLN-L21C432B365-FULL"
10. you should safe that update files out of the HwOUC folder, so you can extract the recovery.img and boot.img later before you restart your device to do the update, because the system deletes these files after successful update
11. update over OTA Update app (System update) in stock system
12. restart to bootloader (#adb restart bootloader#)
13. flash twrp again #fastboot flash recovery twrp-3.1.1-0-berlin.img# [use the OpenKirin twrp edition (the official leads to a bootloop] -> [url]https://forum.xda-developers.com/honor-6x/development/twrp-t3583413[/URL]
14. Important is not to boot to system after flashing TWRP, exactly like as you installed it the first time. So you do #fastboot reboot# and then Vol down + lock
15. backup your system over TWRP (for safety reasons)
16. #adb reboot recovery#
17. flash Magisk zip in TWRP again
18. reboot in twrp
19. you are ready to go with the latest stock rom​
How to extract boot.img and recovery.img out of your actual firmware is explained here:
[url]https://forum.xda-developers.com/honor-6x/how-to/extract-stock-recovery-img-boot-img-img-t3676880[/URL] thanks @Khan ubaid​

citizenserious said:
the Honor 6X is very easy to brick.
Click to expand...
Click to collapse
Not just the 6X but every Kirin device.

This work only with packages like "xxxB360-FULL" or even with smaller downloaded packages that just updates some files? And, if I choose to do this with the FULL package do i have to re modify all the settings that i use actually?

RedSkull23 said:
This work only with packages like "xxxB360-FULL" or even with smaller downloaded packages that just updates some files? And, if I choose to do this with the FULL package do i have to re modify all the settings that i use actually?
Click to expand...
Click to collapse
I already tried it with the FULL package (edited the Guide btw.) you keep all your settings and stuff like before.
If it doesn't show you the FULL package just try the update until it fails, the system than will show you a FULL version of the update after the restart and research. That worked for me so far.
Hope I could help

citizenserious said:
I already tried it with the FULL package (edited the Guide btw.) you keep all your settings and stuff like before.
If it doesn't show you the FULL package just try the update until it fails, the system than will show you a FULL version of the update after the restart and research. That worked for me so far.
Hope I could help
Click to expand...
Click to collapse
What a nice notice, thanks dude! I already own the FULL, i only was worried about the fact that i could lose my data with the FULL one, i waa seeing it a clean firmware install but after this i can go straight with the update. I'll do that later today

RedSkull23 said:
What a nice notice, thanks dude! I already own the FULL, i only was worried about the fact that i could lose my data with the FULL one, i waa seeing it a clean firmware install but after this i can go straight with the update. I'll do that later today
Click to expand...
Click to collapse
I have done it that way yesterday, from B365 to B367 with the FULL package.
But nevertheless please back up your data.
edit: please let us know if it worked for you too

Thank for this guide. I might use this when an update comes.

[email protected] said:
Click to expand...
Click to collapse
What's the matter?

citizenserious said:
I have done it that way yesterday, from B365 to B367 with the FULL package.
But nevertheless please back up your data.
edit: please let us know if it worked for you too
Click to expand...
Click to collapse
Finally i found some time to dedicate on updating my phone, and I'm happy to say that it worked. I made from B360 to B365 and from B365 to B367, both worked at first shot. The only thing that i just can't understand is why the OTA package downloaded yesterday worked immediately, while the same B365-FULL package downloaded a month ago, copied on PC before starting it and later started didn't. With stock recovery and boot images obviously. I tried to start it later but nothing, i tried dload method with the update.app but neither that worked. Probably the OTA downloaded creates a sort of signature that can't be recreated that easily, if the same package fails through dload method... But what matters most is that now I'm on B367, protected with the latest security patch. Sorry for the late answer, time is hard to find... Thanks

Hi
Can someone upload the boot.img and and recovery.img from B367
Thanks in advance

Archerous said:
Hi
Can someone upload the boot.img and and recovery.img from B367
Thanks in advance
Click to expand...
Click to collapse
B367 of which model BLN-LXXCXXX?

shashank1320 said:
B367 of which model BLN-LXXCXXX?
Click to expand...
Click to collapse
I forgot sorry
BLN-L21C432B367

Archerous said:
I forgot sorry
BLN-L21C432B367
Click to expand...
Click to collapse
Check repository thread. Redskull23 has updated there. You may find in OP also in that thread. Link to the thread in my signature

shashank1320 said:
Check repository thread. Redskull23 has updated there. You may find in OP also in that thread. Link to the thread in my signature
Click to expand...
Click to collapse
There is no B367 in the Repository,no boot.img or recovery. thanks for you help
I wait for the next update,and i will not forget to save the update.app to pc. And extract the files

Archerous said:
There is no B367 in the Repository,no boot.img or recovery. thanks for you help
I wait for the next update,and i will not forget to save the update.app to pc. And extract the files
Click to expand...
Click to collapse
@RedSkull23, please see bro. You have updated to this and may be able to share :good:

shashank1320 said:
@RedSkull23, please see bro. You have updated to this and may be able to share :good:
Click to expand...
Click to collapse
I share ist,with the next update :good:

shashank1320 said:
@RedSkull23, please see bro. You have updated to this and may be able to share :good:
Click to expand...
Click to collapse
If we find the B367 package I'll upload everything from it!

I was on rooted BLN-L24C5678B360, and I want to take the OTA 365, so I flashed stock recovery and boot, reboot into system and started the update, but it failed, afterwards the phone stuck at booting up screen.
I have to boot into fastboot and run "fastboot oem relock [my unlock code]" to relock it, then followed by a factory reset. But when it comes to update, it failed again. Upon reboot, it stuck again with the message "Your device has failed verification and may not work properly."
What did I do wrong?
Update: recovered with the official rollback software to 6.0.

shadowcliffs said:
I was on rooted BLN-L24C5678B360, and I want to take the OTA 365, so I flashed stock recovery and boot, reboot into system and started the update, but it failed, afterwards the phone stuck at booting up screen.
I have to boot into fastboot and run "fastboot oem relock [my unlock code]" to relock it, then followed by a factory reset. But when it comes to update, it failed again. Upon reboot, it stuck again with the message "Your device has failed verification and may not work properly."
What did I do wrong?
Click to expand...
Click to collapse
You can try full firmware for b365 if available via dload.
Unlock your bootloader and it will boot to twrp and then boot normally.

[DISCONTINUED]Stock ROM VER:WW-15.0410.1803.51_ROM 4/12 Update TWRP Flashable!

Hey guys since i dint see any stock roms here, i decided to make one thats possible to flash from twrp, its 100% stock nothing added nothing taken from original rom, no firmaware files in rom zip.
I have the the US Asus Zenfone 4 pro , tested ONLY ON THIS DEVICE DO NOT FLASH IT ON ANY OTHER ZENFONE YOU HAVE BEEN WARN!!
How to Flash:
1.Unlock Bootloader Via Official App
2.Flash TWRP
3:Swipe to allow modifications to system VERY IMPORTANT! flash noverity.zip just incase you get stuck in a bootlooop.
4lace zip on your sdcard/internal Storage
5:Wipe Data/System
6:Flash rom zip (Ignore "unknow command error" after flashing, i need to cleanup the update script )
7.Reboot to system
I followed these step and rom flashed fine.
I might try and do some other things with this phone, be advised i haven't tinker with android in a very very long time.
ROM Download LINKS:
OREO-WW-15.0410.1803.51.zip
Change log:
1.Security patch update
2.Improve touch sensitivity
3.Fix launcher home page folder cannot be changed
4.Fix play to/MI Box porject not full screen issue
5.Fix randomly auto reboot issue
6.Fix status bar icon to show more obviously
7.Fix audio issue in 3rd party APPs
OREO-WW-15.0410.1802.34 If you flash this you will need to flash 15.0410.1803.51 right after or you wont have audio and videos will lag.
WW-14.2610.1801.51_ROM
Change Log: January Security Updates
WW-14.2610.1712.45_ROM

Thanks Dude! Now I cant root it safe, without worrying about not having a recovery

No problem!, This will also allow people that unlocked bootloader before getting the latest ota, to be on the latest software update, il keep making these as asus releases future updates for our phones.

Added Latest WW-14.2610.1801.51 update enjoy guys.

rafyvitto said:
Added Latest WW-14.2610.1801.51 update enjoy guys.
Click to expand...
Click to collapse
Thanks dude...and sorry to ask...but can you do one with the oreo update? Thank

As soon as someone posts the oreo ota zip i will, haven't gotten the update on my phone yet ;/.

ok guys i have a working flashable OREO! but videos are lagging because i havent been able to flash the firmware files need to dig deeper into this, before releasing it, give me some time guys, also twrp is unable to decrypt OREO internal data so thats another issue, but this one si out of my league shakalaca will need to update our recovery to decryot oreo data, il upload the current rom if anyone is willinf to flash it with the current issues, let me know.

Here's a screenshot of about screen.

Proof of root on oreo

Hi.Can I update my firmware if bootloader is unlocked and root is installed?If so, how?

You want to upgrade to oreo? Or just update your current firmware?

Just wondering.Are phones updated when the bootloader is unlocked?

Yes you can update phones with unlock bootloader's, if you want official updates you need the stock recovery, the twrp flashable roms i made will give you stock recovery.

Where is the stock recovery to take?

Flash any of the twrp stock roms i made and it will give you stock recovery.

Download firmware from the official website of asus, install it via twrp
and I get stock recovery with the new firmware???You don't know when to do an unofficial unlock of the bootloader?

rafyvitto said:
ok guys i have a working flashable OREO! but videos are lagging because i havent been able to flash the firmware files need to dig deeper into this, before releasing it, give me some time guys, also twrp is unable to decrypt OREO internal data so thats another issue, but this one si out of my league shakalaca will need to update our recovery to decryot oreo data, il upload the current rom if anyone is willinf to flash it with the current issues, let me know.
Click to expand...
Click to collapse
Hi. I flashed the stock rom you uploaded because I accidentally lost mine... aside from audio/video lag issues, audio from calls were also unable to hear. Will patiently wait for your stock rom with firmware files. thaaaaanks

Go into recovery and flash the official oreo zip this will flash firmware files and fix no audio/video lag issues.

rafyvitto said:
Go into recovery and flash the official oreo zip this will flash firmware files and fix no audio/video lag issues.
Click to expand...
Click to collapse
:'(

Groundz said:
:'(
Click to expand...
Click to collapse
If you flash my oreo zip with no firmware and boot it up, this will give you stock recovery, which you will need to flash the stock oreo zip , and ofcourse you will need to reflash twrp after.

Question Going back to CN Rom from Global

hey guys, successfully flashed the global rom over my redmagic 6 pro CN version but decided to go back to the CN rom, but when I try to install it via local update it results in a recovery boot loop and the only option is to do a factory reset, but when I do a factory reset, for some reason it goes back to the Global Rom. Any tips on what I need to do? thanks

auerick said:
hey guys, successfully flashed the global rom over my redmagic 6 pro CN version but decided to go back to the CN rom, but when I try to install it via local update it results in a recovery boot loop and the only option is to do a factory reset, but when I do a factory reset, for some reason it goes back to the Global Rom. Any tips on what I need to do? thanks
Click to expand...
Click to collapse
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.

bob24260 said:
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
Click to expand...
Click to collapse
I actually tried that but then it get's stuck on the Nubia logo, so something must have gone wrong somewhere, and one odd thing is if I try installing the latest V2.63 CN rom via local update it tells me that the package is not compatible with the phone. At least the Redmagic 5G had the local update option on its recovery. Nothing at all on the Redmagic 6 Pro. Isn't recovery.img included in the payload.bin? doesn't seem to be there when I dumped the payload

auerick said:
hey guys, successfully flashed the global rom over my redmagic 6 pro CN version but decided to go back to the CN rom, but when I try to install it via local update it results in a recovery boot loop and the only option is to do a factory reset, but when I do a factory reset, for some reason it goes back to the Global Rom. Any tips on what I need to do? thanks
Click to expand...
Click to collapse
Hi there, can you describe the whole steps to flash your RM6 pro from CN to global?
Which rom did you use? EU or non-EU?
Thanks for the reply.

cannon3025 said:
Hi there, can you describe the whole steps to flash your RM6 pro from CN to global?
Which rom did you use? EU or non-EU?
Thanks for the reply.
Click to expand...
Click to collapse
I installed both just to see if I cam go back to CN rom once I'm on either Rom
Basically just downloaded the Global ROM file from the Nubia website, put it on my phones root folder, then did a local update, using the system update local update setting

auerick said:
I actually tried that but then it get's stuck on the Nubia logo, so something must have gone wrong somewhere, and one odd thing is if I try installing the latest V2.63 CN rom via local update it tells me that the package is not compatible with the phone. At least the Redmagic 5G had the local update option on its recovery. Nothing at all on the Redmagic 6 Pro. Isn't recovery.img included in the payload.bin? doesn't seem to be there when I dumped the payload
Click to expand...
Click to collapse
I believe the recovery is part of the boot image now. I've dumped the payload too and I'll have a quick look and see if it's present. I have all the files for the US, global version. It's 4.1.2 I believe. I'll be happy to help any way I can. I just had a bad experience today... I've had my 6 Pro a week and already the cord has quit working. Not a good sign. I'm starting to regret my purchase.

auerick said:
I actually tried that but then it get's stuck on the Nubia logo, so something must have gone wrong somewhere, and one odd thing is if I try installing the latest V2.63 CN rom via local update it tells me that the package is not compatible with the phone. At least the Redmagic 5G had the local update option on its recovery. Nothing at all on the Redmagic 6 Pro. Isn't recovery.img included in the payload.bin? doesn't seem to be there when I dumped the payload
Click to expand...
Click to collapse
I checked and sure enough no recovery image. Pretty sure it's baked into the boot image. Perhaps try the 4.1.2 boot image? That may boot it. Seems like you've rebranded it global version by flashing the global rom. That's a possibility anyways

bob24260 said:
I checked and sure enough no recovery image. Pretty sure it's baked into the boot image. Perhaps try the 4.1.2 boot image? That may boot it. Seems like you've rebranded it global version by flashing the global rom. That's a possibility anyways
Click to expand...
Click to collapse
ok I'll try to play around with it, won't flashing the 4.1.2 boot.img cause a brick?

auerick said:
ok I'll try to play around with it, won't flashing the 4.1.2 boot.img cause a brick?
Click to expand...
Click to collapse
Shouldn't cause a brick. If you've already flashed global before there shouldn't be any problem. But to be sure instead of flashing just fastboot boot the image.
Fastboot boot boot.img
This will allow you the luxury of trying it without actually flashing it. If it hangs up simply reboot by holding power.

bob24260 said:
Shouldn't cause a brick. If you've already flashed global before there shouldn't be any problem. But to be sure instead of flashing just fastboot boot the image.
Fastboot boot boot.img
This will allow you the luxury of trying it without actually flashing it. If it hangs up simply reboot by holding power.
Click to expand...
Click to collapse
cool didn't know I could do that, thanks for the tip

bob24260 said:
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
Click to expand...
Click to collapse
i tried this and it work but i forgot to wipe ..now i cant save images, files etc. but it doesnt matter.. anyway can you plese tell me how to relock my bootloader? some commands i think? im not familiar with relocking ..only unlocking xD this is my first time relocking bootloader

kittyshik said:
i tried this and it work but i forgot to wipe ..now i cant save images, files etc. but it doesnt matter.. anyway can you plese tell me how to relock my bootloader? some commands i think? im not familiar with relocking ..only unlocking xD this is my first time relocking bootloader
Click to expand...
Click to collapse
fastboot flashing lock
though this will prompt another factory reset

auerick said:
fastboot flashing lock
though this will prompt another factory reset
Click to expand...
Click to collapse
thanks man appreciated!

where did you get the CN rom? can you share here?

here bro https://ui.nubia.cn/rom/detail/68

kittyshik said:
here bro https://ui.nubia.cn/rom/detail/68
Click to expand...
Click to collapse
thanks

Hello what are the steps and commands to go back to the CN rom? I cannot get it from all your comments here :'(

bob24260 said:
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
Click to expand...
Click to collapse
hmm i tried this method, it seems like my phone just went back to global rom even after cn boot image flashed

China rom is faster than global