Develop Bugs

Downgrade from B506 to B125 failed

I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:

You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk

lootjelo said:
You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
(I said that I cant go in Fastboot mode to flash TWRP again.)
OK I am now able to boot in bootloader after much testing I will try it.

I also had the vetlist problem downgrading from b014 to b125. But bootloader still worked. The only thing that worked for me was installing stock recovery jb via bootloader, afterwards a clean install of b014 again via stock recovery. And than I could install b125, also via stock recovery.
In short words:
1. Install stock recovery jb
2. Put (in your case) b506 to sdcard/dload folder
3. Reboot to stock recovery with automatic new installation of b506
4. Put b125 to sdcard/dload
5. Reboot to stock recovery with automatic installation of b125 withoutthe verlist fail.
This is the only way that worked for me from b014 to b125.
Sent from my P6-U00 using xda app-developers app

Install this Original_Recovery

You have to go back to stock recovery mode, do this using adb.
Then install KK Beta and then B125

RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.

Downgrade B506
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks

pave26 said:
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks
Click to expand...
Click to collapse
i have the same problem...

ThePro2014 said:
i have the same problem...
Click to expand...
Click to collapse
and solved it?

pave26 said:
and solved it?
Click to expand...
Click to collapse
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:

ThePro2014 said:
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:
Click to expand...
Click to collapse
thank you, where you downloaded( Emui 2.0) it?

pave26 said:
thank you, where you downloaded( Emui 2.0) it?
Click to expand...
Click to collapse
Look.
1-Firstly With the phone download this:
http://dl.vmall.com/c01l4l4a2y# when you are here press the blue booton and the download are in coursing.
2-then, when the download is finished, you go to download folder and extract the .zip archive, and then put the dload o your external sd!
3-after that,you have to turn off the mobile. and the method of the 3 buttons (vol - and vol + power) the recovery will be updated!
4 - after the end of the flashing restarted again, with that before we get We traveled for updated repair fail.
5-'ll be back on the B506, now just stick a stock with dload on the external card and the 3 buttons you flash the stock rom that you have chosen with JB! regards :good:

Thanks ,,,,, it works :good:

If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
alex.79 said:
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.
Click to expand...
Click to collapse

I can't download from that link. anybody knows another link ?Thank you !

Morar Ioan Cornel said:
I can't download from that link. anybody knows another link ?Thank you !
Click to expand...
Click to collapse
Here has the fast mirror: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4

thanks !!!

Falcifer said:
If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
Click to expand...
Click to collapse
I was testing the ART mode on the P6. I replaced the two system files. After some misbehavior of the ROM I wanted to go back to the B125. When doing a factory reset I am stuck on the Startup-Agent when choosing the WLAN(It stops and reverts to Language select -> so loop)
Can I flash this just with TRWP from dload folder on my SD-Card?

RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
I have same problem, after upgrading to B506, mobile network doesnt work!!
Any one else has same problem?

Bricked phone with no OS

Today I managed to screw up my phone when I tried to downgrade from the kit kat version to the jellybean one.
The phone currently has no OS , and its stuck at the android ascend logo.
I tried to force update it , but without success.
I've wiped the cache , i've formatted the sd card , but without success.
Yes , i've put the dload folder into the sd card root with the update.app file in it. After the 3 button attempt , it goes into checking the modules , failing at VERLIST.
Any help would be apreciated for a noobie like me.

Vlad Cristea said:
Today I managed to screw up my phone when I tried to downgrade from the kit kat version to the jellybean one.
The phone currently has no OS , and its stuck at the android ascend logo.
I tried to force update it , but without success.
I've wiped the cache , i've formatted the sd card , but without success.
Yes , i've put the dload folder into the sd card root with the update.app file in it. After the 3 button attempt , it goes into checking the modules , failing at VERLIST.
Any help would be apreciated for a noobie like me.
Click to expand...
Click to collapse
Are you able to flash custom recovery? If you are able that try flashing some custom Roms.... one more thing, try flashing B132 with 3 buttons method.
Sent from my HUAWEI P6-U06 using XDA mobile app

AdnanCG said:
Are you able to flash custom recovery? If you are able that try flashing some custom Roms.... one more thing, try flashing B132 with 3 buttons method.
Sent from my HUAWEI P6-U06 using XDA mobile app
Click to expand...
Click to collapse
I flashed the B132 with the 3 buttons method and this happened :
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
The loading bar isn't moving , and its been sitting like this for 25-30 min.
The phone is not connected to a pc or laptop , it's just charging.
How does custom recovery actually work ?

Vlad Cristea said:
I flashed the B132 with the 3 buttons method and this happened :
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
The loading bar isn't moving , and its been sitting like this for 25-30 min.
The phone is not connected to a pc or laptop , it's just charging.
How does custom recovery actually work ?
Click to expand...
Click to collapse
Remove the charger. It thinks that it's connected with a USB cable.

miz_pimp said:
Remove the charger. It thinks that it's connected with a USB cable.
Click to expand...
Click to collapse
I tried that , and its back to the VERLIST error.
So far I have tried B112 , B132 and B520 . All of them via 3 button method.

Vlad Cristea said:
I tried that , and its back to the VERLIST error.
So far I have tried B112 , B132 and B520 . All of them via 3 button method.
Click to expand...
Click to collapse
Which firmware did you have on your device before? If it was any of the B7xx firmwares, then you need to follow the downgrade method for those firmwares. You'll just need to search for the guide.

miz_pimp said:
Which firmware did you have on your device before? If it was any of the B7xx firmwares, then you need to follow the downgrade method for those firmwares. You'll just need to search for the guide.
Click to expand...
Click to collapse
I can't remember exactly which one , it was the latest kit kat version that came preinstalled with some chinese apps ( I had to install google play store myself ).

Vlad Cristea said:
I can't remember exactly which one , it was the latest kit kat version that came preinstalled with some chinese apps ( I had to install google play store myself ).
Click to expand...
Click to collapse
My suggestion is that if you still have stock recovery that you try to flash B708 firmware (chinese) one, through update.app process and see if it turns up the error again.
Sent from my SM-G850F

Vlad Cristea said:
I can't remember exactly which one , it was the latest kit kat version that came preinstalled with some chinese apps ( I had to install google play store myself ).
Click to expand...
Click to collapse
Ok, I'm assuming you had B708 installed.
You say that you don't have an OS installed, but that can't be if you only had the stock recovery on your device. You say that you've wiped cache, and SD card, but have you done a factory reset?
I've had my device stuck on the ascend logo before, and wiping data worked for me. Please try that, and let me know if your phone boots up. Then you should find the downgrade method from B708 back to either Jelly Bean or the international Kit Kat firmware.

tileeq said:
My suggestion is that if you still have stock recovery that you try to flash B708 firmware (chinese) one, through update.app process and see if it turns up the error again.
Sent from my SM-G850F
Click to expand...
Click to collapse
Took me 4 bloody hours to download it from Huawei's website...Those chinese servers are incredible sometimes.
miz_pimp said:
Ok, I'm assuming you had B708 installed.
You say that you don't have an OS installed, but that can't be if you only had the stock recovery on your device. You say that you've wiped cache, and SD card, but have you done a factory reset?
I've had my device stuck on the ascend logo before, and wiping data worked for me. Please try that, and let me know if your phone boots up. Then you should find the downgrade method from B708 back to either Jelly Bean or the international Kit Kat firmware.
Click to expand...
Click to collapse
I forgot to mention I tried a factory reset too , but without success.
It seems that version worked ! It passed every module and installed. I'd like to thank you both for your help , you'd been epic !

Im glad that ive been of any help.
Sent from my SM-G850F

How to downgrade from WW4.21.40.223 to WW_2.12.40.11?

Hi,
I have the flickering screen problem with my phone and it is out of warranty so i can't send it back to repair.
I tried upgrading to the latest firmware, tried factory reset, wipe cache, installing google launcher, enabling the HW thing in developer mode and nothing worked.
I read that WW_2.12.40.11 version doesn't have the screen problem and i want to try it, but i wanna be sure i'm doing it the right way.
1) I read that i can't just put the wanted firmware in my phone and install the update but i must also flash the matching recovery to flash the wanted version - is it true?
2) Can i downgrade straight from my version to the lower one because i think the other way around, i need to have higher version for upgrading to the higher version i now have.
3) Where can i find the adb driver for this?
Thanks

You can downgrade via ext sd card using the downgrade version from asus > 52.20.40.196 LP which when installed , reboots to 2.20.40.196LP
When putting WW-UL- 52.20.40.196.zip.zip ,make sure to put an extra .zip on the end in file manager or in sd from pc first and reboot.
If you then put WW-UL-2.12.40.11-user.zip.zip (extra .zip) on sd or in file manager . You might get that to give you notification after a reboot too. Although i have not tested to downgrade that far .
You must use the first 52.20 blah blah fw to initially downgrade first though. Ignore this and you are liable to brick. Here >
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-52.20.40.196-user.zip
See my downgrade via ext sd video and thread , familiarise yourself with the process first !
https://forum.xda-developers.com/zenfone2/help/success-downgrade-mm-to-lp-via-sd-card-t3520642
Any questions , just ask

timbernot said:
You can downgrade via ext sd card using the downgrade version from asus > 52.20.40.196 LP which when installed , reboots to 2.20.40.196LP
When putting WW-UL- 52.20.40.196.zip.zip ,make sure to put an extra .zip on the end in file manager or in sd from pc first and reboot.
If you then put WW-UL-2.12.40.11-user.zip.zip (extra .zip) on sd or in file manager . You might get that to give you notification after a reboot too. Although i have not tested to downgrade that far .
You must use the first 52.20 blah blah fw to initially downgrade first though. Ignore this and you are liable to brick. Here >
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-52.20.40.196-user.zip
See my downgrade via ext sd video and thread , familiarise yourself with the process first !
https://forum.xda-developers.com/zenfone2/help/success-downgrade-mm-to-lp-via-sd-card-t3520642
Any questions , just ask
Click to expand...
Click to collapse
Thanks alot
Just a question before i try your method: I already installed 2.12.40.11 recovery.img into the phone. can i still use your method or should i first flash 4.21.40.223 recovery.img back to the phone?

gifnooky said:
Thanks alot
Just a question before i try your method: I already installed 2.12.40.11 recovery.img into the phone. can i still use your method or should i first flash 4.21.40.223 recovery.img back to the phone?
Click to expand...
Click to collapse
OK, it's weird, i did flash the 2.12.40.11 recovery.img to the phone using adb and it was said in the console that the process completed, but now when i enter recovery mode it still shows me 4.21.40.223 version.

OK, I did downgrade with your method and it works great, but when i try to downgrade fro that version to the version i want to try i get error that i cant install the package over the existing newer version.
Just to inform.

gifnooky said:
OK, I did downgrade with your method and it works great, but when i try to downgrade fro that version to the version i want to try i get error that i cant install the package over the existing newer version.
Just to inform.
Click to expand...
Click to collapse
If you want to downgrade to such an old version, find the .raw file of that version (search here on XDA) and flash it via Asus Flash Tool.

JBolho said:
If you want to downgrade to such an old version, find the .raw file of that version (search here on XDA) and flash it via Asus Flash Tool.
Click to expand...
Click to collapse
Thanks for the advice.
I searched and found raw firmware versions but no the one i'm looking for.
Is there any way i can install the official firmware i have? i also found recovery.img, boot.img, droidboot.img of the version i want.

gifnooky said:
Thanks for the advice.
I searched and found raw firmware versions but no the one i'm looking for.
Is there any way i can install the official firmware i have? i also found recovery.img, boot.img, droidboot.img of the version i want.
Click to expand...
Click to collapse
If you have all the img partitions you can always try installing via fastboot commands but i really recommend using a raw with Asus Flash Tool...

Hai friend try flash 3 file of boot.img recovery.img and droidboot.img version 40.11.. and then flash rom with adb sideload.. its work for me... and solve my prob flicker display..
Sent from my ASUS_Z00AD using Tapatalk

savve said:
Hai friend try flash 3 file of boot.img recovery.img and droidboot.img version 40.11.. and then flash rom with adb sideload.. its work for me... and solve my prob flicker display..
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Hi, thanks i'l try that.
does it matter in what order i flash this 3 files?
Edit: If i already flashed the ROM can i just flash the boot.img and droidboot.img or do i need to do the whole process including flashing the ROM again?

Is your screen flickering problem like this: https://www.youtube.com/watch?v=kRuxTefNcKw
If its like that I was told its a LCD hardware problem which gets fixed by replacing LCD.

Update:
Well, I installed firmware 2.12.40.11 and it worked fine for several days but then the screen started to flicker again.
i started to update the devices with OTA updates and then i saw that in firmware WW_2.20.40.174 the screen didn't flicker.
i had further updates and then the screen started to flicker again.
i tried to flash recovery.img, boot.img and droidboot.img but not the device only enters fastboot mode but when i try to enter normal boot or recovery mode, it only comes back to fast boot mode.
any suggestion what should i do to unbrick the phone?
Thanks

Roll Back to MarshMallow [BLN-L22]

Hi,
Below are the steps to rollback to Marshmallow from Nougat. I've only tested it on BLN-L22 so I don't know if it works with other variants.
Your bootloader would be locked. However, you can unlock again using the old unlock code.
You can find firmware of your version @ Honor Official Site
Download the Marshmallow firmware from here Honor India Official Support
Unzip it and place the dload folder in the sdcard (internal storage wont work)
Power off the device.
Press Volume Down + Volume Up + Power key to log into Huawei software upgrade
Let it finish. Now installation is done. But now when you will boot, it will bootloop and go to Huawei ercovery. Simply select the shutdown option
Once the device is off, press Volume Up + Power. This will take you to Huawei Recovery
Wipe data and Wipe Cache
Restart. You are back to MarshMallow
Kindly do the above at your own risk. It worked for me, but it may brick for you.
Edit : User @honor6xak was able to rollback after wiping the system using TWRP and following above steps. If there is no system, there would be no firmware for Honor to overwrite. It would be as good as flashing fresh.
Method 2.
1. Make a nandroid backup (complete backup) and save it somewhere safe. Just in case things get messy.
2. Download the official firmware (Marshmallow) from the Honor official site.
3. Extract the dload folder from the firmware and put it into an sdcard (physical one).
4. Reboot to TWRP and wipe data + system. Twrp will warn you about wiping system. Once you do it. Power off the device.
5. Press volume up + volume down + power this will take you to Huawei recovery and will auto install the firmware if the folder is there in sdcard.
This is a tad bit risky but if you have nandroid backup then you can be on a safe side. But still do it only if you are sure. I don't have money to pay if you Sue me

The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.

Ziffnil said:
The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.
Click to expand...
Click to collapse
Yes, that's the reason I specified the BLN number. You don't need to login to have the firmware download. If you can give the link we can update the post.
Edit : I've updated site for Official firmware of various regions in the main post

It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem

eddy7990 said:
It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem
Click to expand...
Click to collapse
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus

So hacky but... you can find the 'rollback package' here http ://www, hihonor, ]com/us/support/details/index,html?[DOC_ID=94205] and the firmware here http ://www, hihonor, [com/us/support/details/index.html?][DOC_ID=94205]
Just remove the spaces, brackets and replace periods with commas.

suhel28 said:
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus
Click to expand...
Click to collapse
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you

Angircy said:
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you
Click to expand...
Click to collapse
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.

suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse
Bro it didn't work for me.

Angircy said:
Bro it didn't work for me.
Click to expand...
Click to collapse
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.

suhel28 said:
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.
Click to expand...
Click to collapse
Thanks a lot bro. I'll try that.

It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.

Ziffnil said:
It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.
Click to expand...
Click to collapse
I'd put the dload folder in the sdcard folder but it didn't work. I'd to use a physical sdcard

so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse

honor6xak said:
so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
Click to expand...
Click to collapse
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP

i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not opening and restarting device didnt help .... hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Click to expand...
Click to collapse

honor6xak said:
i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not restarting hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
Click to expand...
Click to collapse
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP

suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP
Click to expand...
Click to collapse
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
the file u mentioned above is it nougat ???
my twrp says there is no os on the device when i head to reboot so my question >>is it posible to install nougat and reboot them or shoould i go back to the marsh...
pls help me out bro

honor6xak said:
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
Click to expand...
Click to collapse
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works

suhel28 said:
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works
Click to expand...
Click to collapse
Both methods didn't work for me though I flashed the 733mb file using TWRP successfully.

Please someone help mep

Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me

Salim0900 said:
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Click to expand...
Click to collapse
Shows you which error?
Did you try to install it via local update?
Anyway, your best bet is to install TWRP and flash the CN ROM through TWRP.
Alternatively, use miflash tool in the unofficial unbrick tool to flash the CN firmware via edl mode

Nubia package error
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good

Salim0900 said:
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Click to expand...
Click to collapse
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best

zayidhs said:
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
Click to expand...
Click to collapse
Sorry brother but I can't see any link

Salim0900 said:
Sorry brother but I can't see any link
Click to expand...
Click to collapse
http://romdownload.nubia.com/红魔5G/V6.23/NX659J-update.zip
There you are. Its the 6.23 version of the cn rom
This directs to the 5s version but both the 5s and 5g versions of this rom are identical. ( Md5 checksum proves its the same file)
Flash from recovery. Or through TWRP

Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device

Salim0900 said:
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Click to expand...
Click to collapse
Otg refers to a external usb device you connect to the phone. If you have the update.zip on the root of the internal memory it should show up.
If it does not. You should use the root without unlocking bootloader tutorial to install TWRP. The zip will flash from there with no problems.