Develop Bugs

pls pls help my bricked ascend p6 pls pls

I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device

sasadeaunty said:
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
Click to expand...
Click to collapse
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help

hi
taaeem said:
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
Click to expand...
Click to collapse
Hi, if i reboot without plug-in the usb, it will also fail like (attached photo124)

hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery

blueIBI said:
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
Click to expand...
Click to collapse
Different stock recovery only can install certain ROM? I tried B125 already cannot. Any other recommend ROM for me to try? I rmb I flashed a quite latest stock recovery

then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..

blueIBI said:
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
Click to expand...
Click to collapse
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.

sasadeaunty said:
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
Click to expand...
Click to collapse
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4

maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..

miz_pimp said:
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
hi miz_pimp, if i do not plug in the usb cable, it will directly go into fail as showed in the picture124 i attached below, I do not rmb what firmware i installed previously, but I did a full wipe, I do not think thr is still firmware inside beside stock recovery.
Click to expand...
Click to collapse

blueIBI said:
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
Click to expand...
Click to collapse
I tried with different sdcard without usb plugged in, still giving me fail

very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..

blueIBI said:
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
Click to expand...
Click to collapse
i cant even flash my recovery, when i use adb, it just shows me waiting for device, then no response. I tried most of the ways but no one can help......

hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..

blueIBI said:
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
Click to expand...
Click to collapse
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess

miz_pimp said:
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Click to expand...
Click to collapse
sasadeaunty said:
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
Click to expand...
Click to collapse
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.

miz_pimp said:
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
Click to expand...
Click to collapse
hi miz_pimp, thank you so muchhhhhhhhhhhhh, I am able to recover my p6 with the firmware u linked to me. Really thank you and thanks for others too for helping me too. Thanks all.

Glad you got it sorted, and you're very welcome. [emoji2]

I lost my official running system

My phone was routed and i tried to install the last update from huawei then it stuck in the recovery mod sp i had to install an unofficial cm13 and now i want to return to huawei official system rui 4.01 what should i do ?

Return to official
Simpro said:
My phone was routed and i tried to install the last update from huawei then it stuck in the recovery mod sp i had to install an unofficial cm13 and now i want to return to huawei official system rui 4.01 what should i do ?
Click to expand...
Click to collapse
If you already downloaded official firmware for your model, put it on root folder on your sdcard or internal memory, in folder named "dload" (without quotes). It should contain two files: recovery.img and UPDATE.APP. Then turn off your phone, and turn it on with holding Power+Volume Up+Volume Down. Wait for install to finish, it will reboot itself when done. You will lose all your data on internal storage and root, so you will need to install TWRP and SuperSU again if needed.

What if it stuck again in twrp like the first time ?

Simpro said:
What if it stuck again in twrp like the first time ?
Click to expand...
Click to collapse
Recovery.img in dload folder will replace TWRP with default Huawei recovery. Also, i was stucked in earlier TWRP recovery, with version 3.0.2-0 it was ok.
If you don`t have need for root, rom will work with default recovery.

Ok thank you i will try it

Where i can find a stock firmware for gx8 (i'am from morocco)

Simpro said:
Where i can find a stock firmware for gx8 (i'am from morocco)
Click to expand...
Click to collapse
Hm, not sure, regional Huawei website for Morocco doesn't list GX8, you could try with rom from this forum: https://forum.xda-developers.com/gx8/how-to/g8-g7-plus-official-roms-europe-t3294362 .

it will be in middle east like my device
http://consumer.huawei.com/kw-en/support/products/downloads/detail/huawei-g8-kwen.htm?id=84325

Roll Back to MarshMallow [BLN-L22]

Hi,
Below are the steps to rollback to Marshmallow from Nougat. I've only tested it on BLN-L22 so I don't know if it works with other variants.
Your bootloader would be locked. However, you can unlock again using the old unlock code.
You can find firmware of your version @ Honor Official Site
Download the Marshmallow firmware from here Honor India Official Support
Unzip it and place the dload folder in the sdcard (internal storage wont work)
Power off the device.
Press Volume Down + Volume Up + Power key to log into Huawei software upgrade
Let it finish. Now installation is done. But now when you will boot, it will bootloop and go to Huawei ercovery. Simply select the shutdown option
Once the device is off, press Volume Up + Power. This will take you to Huawei Recovery
Wipe data and Wipe Cache
Restart. You are back to MarshMallow
Kindly do the above at your own risk. It worked for me, but it may brick for you.
Edit : User @honor6xak was able to rollback after wiping the system using TWRP and following above steps. If there is no system, there would be no firmware for Honor to overwrite. It would be as good as flashing fresh.
Method 2.
1. Make a nandroid backup (complete backup) and save it somewhere safe. Just in case things get messy.
2. Download the official firmware (Marshmallow) from the Honor official site.
3. Extract the dload folder from the firmware and put it into an sdcard (physical one).
4. Reboot to TWRP and wipe data + system. Twrp will warn you about wiping system. Once you do it. Power off the device.
5. Press volume up + volume down + power this will take you to Huawei recovery and will auto install the firmware if the folder is there in sdcard.
This is a tad bit risky but if you have nandroid backup then you can be on a safe side. But still do it only if you are sure. I don't have money to pay if you Sue me

The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.

Ziffnil said:
The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.
Click to expand...
Click to collapse
Yes, that's the reason I specified the BLN number. You don't need to login to have the firmware download. If you can give the link we can update the post.
Edit : I've updated site for Official firmware of various regions in the main post

It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem

eddy7990 said:
It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem
Click to expand...
Click to collapse
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus

So hacky but... you can find the 'rollback package' here http ://www, hihonor, ]com/us/support/details/index,html?[DOC_ID=94205] and the firmware here http ://www, hihonor, [com/us/support/details/index.html?][DOC_ID=94205]
Just remove the spaces, brackets and replace periods with commas.

suhel28 said:
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus
Click to expand...
Click to collapse
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you

Angircy said:
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you
Click to expand...
Click to collapse
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.

suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse
Bro it didn't work for me.

Angircy said:
Bro it didn't work for me.
Click to expand...
Click to collapse
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.

suhel28 said:
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.
Click to expand...
Click to collapse
Thanks a lot bro. I'll try that.

It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.

Ziffnil said:
It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.
Click to expand...
Click to collapse
I'd put the dload folder in the sdcard folder but it didn't work. I'd to use a physical sdcard

so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse

honor6xak said:
so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
Click to expand...
Click to collapse
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP

i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not opening and restarting device didnt help .... hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Click to expand...
Click to collapse

honor6xak said:
i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not restarting hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
Click to expand...
Click to collapse
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP

suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP
Click to expand...
Click to collapse
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
the file u mentioned above is it nougat ???
my twrp says there is no os on the device when i head to reboot so my question >>is it posible to install nougat and reboot them or shoould i go back to the marsh...
pls help me out bro

honor6xak said:
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
Click to expand...
Click to collapse
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works

suhel28 said:
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works
Click to expand...
Click to collapse
Both methods didn't work for me though I flashed the 733mb file using TWRP successfully.

Bootloop after flahsing Magisk & no-verity zips

Hi,
I just tried to root my Mi Max 3 but got bootloop, what can I do?
I unlocked the device.
Then I flashed TWRP 3.2.0. nitrogen, devcie was encrypted then.
I flashed Magisk 18.1., rebooted, but bootloop.
I rebooted into TWRP again and flashed no-verity-opt-encrypt-6.0.zip and again Magisk 18.1 and rebooted, but bootloop only.
I did factory reset but bootloop only.
What am I suposed to do? Any help from you guys?
Thanks you very much !

download and install the latest twrp from nijel8. Make a wipe and install only a clean rom and magisk. Nothing more. It must work.

Tried magisk 18.0?
I use magisk 18.0 and official twrp 3.2.3.0.

Hi,
it didnt help unfortunately.
I think I first need to flash a stock firmware completely right? Then try another round with the suggested versions by you guys.
I downloaded stock ROM from Xiao Mi Website here: http://en.miui.com/a-234.html
It is named: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global
But when I try to flash it via fastboot mode and the help of Xiao Mi Flash Tool I get an error like this (attachment)
Any help?
Update: I just flashed official full rom named: miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip via TWRP and it didnt show any errors (but TWRP still installed, I expected stock revoery actually?!). I wiped cache and rebooted but still bootloop.
I am really not sure what to do now.
Update 2: I now was able to flash stock rom (nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global) via fastboot mode (error like on screenshot didnt appear anymore, dont really know why) now phone is only booting into stock MIUI recovery and shows a red noteification: "This MIUI Version cant be installed on this device" -> Can anybode give me help please?
Update 3: Tried to unlock again but it fails due to my device is not bound to my MI Account, but how to add it to account as I cant boot it up anymore and go to the settings in android. Or do I need another FULL Rom? I read smth that this error (Rom cant be installed on this device) appears if one is trying to flash Global Rom instead of China ROM? Where to get this one? Dont know the difference actually But my phone had google services preinstalled
I now even downloaded the chinese full rom: Mi Max 3 China Stable ROM 10.0.6.0 – V10.0.6.0.OEDCNFH / MIUI 9 / fastboot / Android Oreo because I think maybe this was originally i nstalled (purchased phone in Indonesia which is black market)
but once I try to flash it, the mix flash tool tells me now erase is not allowed in locked mode. I need to unlock first? but how? Unlock bootloader is not possible due to device is not bound with my mi-account.

I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?

tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
What base it has, china or global when you get it?

tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Edit: sorry, just checked. Not possible to select file from stock mi recovery.

Lecterr said:
What base it has, china or global when you get it?
Click to expand...
Click to collapse
I dont really know. AT least all google services were available. does this mean it has been the global base? I bought this phone in Indonesia were it is not available officially, only through some black market sellers in the malls. Maybe they also have used the chinese versions, unlocked and reflashed the global versions and then they sell it. So maybe it has been the chinese base originally but is sold out with the global version? On the devices backside is a sticker with IMEi, IMEI2, MEID and SN, does this say anything about the version?
bobo9900 said:
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Click to expand...
Click to collapse
I think not, in Stock Recovery which is now installed on the phone I only have Reboot, Wipe Data and Connect MIAssistant

How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..

bobo9900 said:
How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..
Click to expand...
Click to collapse
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.

tobyffm said:
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.
Click to expand...
Click to collapse
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.

bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.
Click to expand...
Click to collapse
bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka cina recovery.
Click to expand...
Click to collapse
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.

tobyffm said:
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.
Click to expand...
Click to collapse
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.

bobo9900 said:
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.
Click to expand...
Click to collapse
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?

tobyffm said:
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?
Click to expand...
Click to collapse
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..

bobo9900 said:
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..
Click to expand...
Click to collapse
Thanks anyway bobo9900 for assisting me. And I should not try to flash a MIUI 9 rom, yeah?
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?

tobyffm said:
Thanks anyway bobo9900 for assisting me.
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?
Click to expand...
Click to collapse
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..

bobo9900 said:
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..
Click to expand...
Click to collapse
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?

tobyffm said:
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?
Click to expand...
Click to collapse
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.

bobo9900 said:
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.
Click to expand...
Click to collapse
OK checked. Through fastboot check of ARB I get:
fastboot getvar anti
getvar:anti FAILED (remote: GetVar Variable Not found)
finished. total time: 0.016s
Wondering again why again an error lol
TRhrough opening flash_all.bat file I see:
CURRENT_ANTI_VER=4
fastboot %
which means I cant downgrade, ya?

Question China rom Android 12 ?

If Anyone installed china dev rom Android 12 on your device , give installation guide if possible thank you

drmagesh7 said:
If Anyone installed china dev rom Android 12 on your device , give installation guide if possible thank you
Click to expand...
Click to collapse
Unlock your device. Flash the china rom of 11. Root it and install this module throw magisk. Type 7 times on the miui logo in the update settings. Download the china recoveryy rom beta 12 on the root of your tablet. Select the three dot on the right and choose update from a local package. Choose the rom china beta 12 and wait to install it. You can root the 12 too if you want. You can find the guides of every point in this forum. Root, unlock, how to flash rom ecc...
Edit: there is a fastboot rom from the beta 12. You can install it directly throw xiaomi flash tool or throw the adb command, without to install before the china 11.
Link: https://xiaomirom.com/en/download/xiaomi-pad-5-nabu-weekly-V13.0.0.1.46.DEV/#china-fastboot

Thank you so much

Got stuck on fastboot mode not working falsh all and mi flash says error reading sparse file like that I have downloaded many files, it's again comes like this, help through this thank you

drmagesh7 said:
Got stuck on fastboot mode not working falsh all and mi flash says error reading sparse file like that I have downloaded many files, it's again comes like this, help through this thank you
Click to expand...
Click to collapse
You have to boot in bootloader mode. Adb reboot bootloader

My device totally dead , it's not turning on its completely black screen power button and volume down method it's not working any solution

drmagesh7 said:
My device totally dead , it's not turning on its completely black screen power button and volume down method it's not working any solution
Click to expand...
Click to collapse
are you sure you flashed the correct CN firmware for nabu?

Blanc_WhiteHeart said:
are you sure you flashed the correct CN firmware for nabu?
Click to expand...
Click to collapse
Ya this one