Related
hi every one
last night when i wanted to sleep.my phone suddenly restart .when the os wants to load.it reamins at huawei logo
i think i have this os :SelfieP6 by Reyncla
so i decided to install another rom
i found this one interest :
[ROM][4.4.4][ Unofficially Omni ROM
in order to install this rom.it said :ive to first install kk beta .to install kk beta i have to go back to stock recovery.i had twrp.so ive installed these 2 by twrp : Stock Firmware Huawei B506 CN KitKat boot and recovery.zip
first i install boot then recovery.
and now what ever i do .it reamains in huawei logo.my twrp gone,my os gone
i cant do anything with adb commands cuz it says :device not found
am i bricked my phone >?
v.mohamadtaghi said:
hi every one
last night when i wanted to sleep.my phone suddenly restart .when the os wants to load.it reamins at huawei logo
i think i have this os :SelfieP6 by Reyncla
so i decided to install another rom
i found this one interest :
[ROM][4.4.4][ Unofficially Omni ROM
in order to install this rom.it said :ive to first install kk beta .to install kk beta i have to go back to stock recovery.i had twrp.so ive installed these 2 by twrp : Stock Firmware Huawei B506 CN KitKat boot and recovery.zip
first i install boot then recovery.
and now what ever i do .it reamains in huawei logo.my twrp gone,my os gone
i cant do anything with adb commands cuz it says :device not found
am i bricked my phone >?
Click to expand...
Click to collapse
Boot into bootloader and reflash twrp.
1) I dont remember the key combination required to get into fastboot, could anyone help out on this one
2) When in fastboot your phone should get stuck on the huawei screen, then you run fastboot flash recovery recovery_twrp.img
recovery_twrp.img being the twrp file from surdus thread.
3) fastboot restart and you should be able to access twrp
TNX
tauio111 said:
Boot into bootloader and reflash twrp.
1) I dont remember the key combination required to get into fastboot, could anyone help out on this one
2) When in fastboot your phone should get stuck on the huawei screen, then you run fastboot flash recovery recovery_twrp.img
recovery_twrp.img being the twrp file from surdus thread.
3) fastboot restart and you should be able to access twrp
Click to expand...
Click to collapse
hi buddy tanx for your help.thats quite helpful.when i have twrp ,i want to use dlod methode.but i cant .can u help me what to do >?
v.mohamadtaghi said:
hi buddy tanx for your help.thats quite helpful.when i have twrp ,i want to use dlod methode.but i cant .can u help me what to do >?
Click to expand...
Click to collapse
dload method can be used only with stock recovery.
TWRP is for flashing custom ROM's.
install
XDAvatar said:
dload method can be used only with stock recovery.
TWRP is for flashing custom ROM's.
Click to expand...
Click to collapse
how can i install stock recovery ? .in surdu's post .there are 2 types of stock recovery.which one of them should i install?
v.mohamadtaghi said:
how can i install stock recovery ? .in surdu's post .there are 2 types of stock recovery.which one of them should i install?
Click to expand...
Click to collapse
Try both. See which one is working.
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
sasadeaunty said:
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
Click to expand...
Click to collapse
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
hi
taaeem said:
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
Click to expand...
Click to collapse
Hi, if i reboot without plug-in the usb, it will also fail like (attached photo124)
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
blueIBI said:
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
Click to expand...
Click to collapse
Different stock recovery only can install certain ROM? I tried B125 already cannot. Any other recommend ROM for me to try? I rmb I flashed a quite latest stock recovery
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
blueIBI said:
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
Click to expand...
Click to collapse
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
sasadeaunty said:
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
Click to expand...
Click to collapse
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
miz_pimp said:
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
hi miz_pimp, if i do not plug in the usb cable, it will directly go into fail as showed in the picture124 i attached below, I do not rmb what firmware i installed previously, but I did a full wipe, I do not think thr is still firmware inside beside stock recovery.
Click to expand...
Click to collapse
blueIBI said:
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
Click to expand...
Click to collapse
I tried with different sdcard without usb plugged in, still giving me fail
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
blueIBI said:
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
Click to expand...
Click to collapse
i cant even flash my recovery, when i use adb, it just shows me waiting for device, then no response. I tried most of the ways but no one can help......
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
blueIBI said:
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
Click to expand...
Click to collapse
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
miz_pimp said:
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Click to expand...
Click to collapse
sasadeaunty said:
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
Click to expand...
Click to collapse
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
miz_pimp said:
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
Click to expand...
Click to collapse
hi miz_pimp, thank you so muchhhhhhhhhhhhh, I am able to recover my p6 with the firmware u linked to me. Really thank you and thanks for others too for helping me too. Thanks all.
Glad you got it sorted, and you're very welcome. [emoji2]
Hi,
Below are the steps to rollback to Marshmallow from Nougat. I've only tested it on BLN-L22 so I don't know if it works with other variants.
Your bootloader would be locked. However, you can unlock again using the old unlock code.
You can find firmware of your version @ Honor Official Site
Download the Marshmallow firmware from here Honor India Official Support
Unzip it and place the dload folder in the sdcard (internal storage wont work)
Power off the device.
Press Volume Down + Volume Up + Power key to log into Huawei software upgrade
Let it finish. Now installation is done. But now when you will boot, it will bootloop and go to Huawei ercovery. Simply select the shutdown option
Once the device is off, press Volume Up + Power. This will take you to Huawei Recovery
Wipe data and Wipe Cache
Restart. You are back to MarshMallow
Kindly do the above at your own risk. It worked for me, but it may brick for you.
Edit : User @honor6xak was able to rollback after wiping the system using TWRP and following above steps. If there is no system, there would be no firmware for Honor to overwrite. It would be as good as flashing fresh.
Method 2.
1. Make a nandroid backup (complete backup) and save it somewhere safe. Just in case things get messy.
2. Download the official firmware (Marshmallow) from the Honor official site.
3. Extract the dload folder from the firmware and put it into an sdcard (physical one).
4. Reboot to TWRP and wipe data + system. Twrp will warn you about wiping system. Once you do it. Power off the device.
5. Press volume up + volume down + power this will take you to Huawei recovery and will auto install the firmware if the folder is there in sdcard.
This is a tad bit risky but if you have nandroid backup then you can be on a safe side. But still do it only if you are sure. I don't have money to pay if you Sue me
The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.
Ziffnil said:
The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.
Click to expand...
Click to collapse
Yes, that's the reason I specified the BLN number. You don't need to login to have the firmware download. If you can give the link we can update the post.
Edit : I've updated site for Official firmware of various regions in the main post
It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem
eddy7990 said:
It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem
Click to expand...
Click to collapse
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus
So hacky but... you can find the 'rollback package' here http ://www, hihonor, ]com/us/support/details/index,html?[DOC_ID=94205] and the firmware here http ://www, hihonor, [com/us/support/details/index.html?][DOC_ID=94205]
Just remove the spaces, brackets and replace periods with commas.
suhel28 said:
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus
Click to expand...
Click to collapse
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you
Angircy said:
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you
Click to expand...
Click to collapse
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse
Bro it didn't work for me.
Angircy said:
Bro it didn't work for me.
Click to expand...
Click to collapse
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.
suhel28 said:
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.
Click to expand...
Click to collapse
Thanks a lot bro. I'll try that.
It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.
Ziffnil said:
It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.
Click to expand...
Click to collapse
I'd put the dload folder in the sdcard folder but it didn't work. I'd to use a physical sdcard
so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse
honor6xak said:
so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
Click to expand...
Click to collapse
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP
i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not opening and restarting device didnt help .... hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Click to expand...
Click to collapse
honor6xak said:
i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not restarting hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
Click to expand...
Click to collapse
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP
suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP
Click to expand...
Click to collapse
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
the file u mentioned above is it nougat ???
my twrp says there is no os on the device when i head to reboot so my question >>is it posible to install nougat and reboot them or shoould i go back to the marsh...
pls help me out bro
honor6xak said:
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
Click to expand...
Click to collapse
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works
suhel28 said:
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works
Click to expand...
Click to collapse
Both methods didn't work for me though I flashed the 733mb file using TWRP successfully.
DISCLAIMER
This ROM is not my work. It belongs to Askucio Droid (Sorry if I got the spelling wrong) & Team Pixys OS. I am just posting on this section for our devices with detailed instruction.
WARNING
Your warranty is now void. I am not responsible if you brick your device. Please make sure you know what you're doing and don't proceed if you don't meet the requirements. However I will try to help all I can.
REQUIREMENTS
*Unlocked Bootloader
*You must be on Stock EMUI 8
*Honor 6x
*TWRP recovery
*Non-Rooted Device
*Patience
DOWNLOAD
OpenGapps: https://opengapps.org
(Download the nano package for arm64 & Android 9)
ROM: https://sourceforge.net/projects/pixys-os/files/pie/hi6250/
(Download latest zip.)
INSTALLATION
*Boot your device into TWRP recovery.
*Wipe->Format Data->YES->Advanced Wipe.
*Mark Dalvik/ART Cache, Cache, Data, Internal & System.
*Perform the wipes. Only wipe these mentioned and nothing else.
*Now go to install and select Pixys OS zip. Delay: 2-4 min.
*Wipe Cache and then install Gapps. Delay around 3-4 min. Again wipe Cache.
*Now goto Reboot-> Power Off/Shutdown.
*Now plug your USB cable into computer and other end into phone while holding Volume Down and boot into Bootloader.
*Flash Stock Recovery for your device.
*Power off by holding power button. Once phone restarts hold Volume Up to enter into erecovery and Wipe Data/Factory Reset.
*Wipe Cache and Reboot.
*Initial Configuration and Start.
Rooting
Boot your device into Bootloader and flash TWRP from Elemental ROM thread (Be sure to thank KingOfMezi). After that flash latest Magisk for root goodies.
If you face any problem feel free to ask. ROM is not mine. I simply make the guide to flash on Honor 6x. All credit goes to Askucio Droid and Pixys OS Team.
Great post!
I still have to rebrand and update to emui8.
Looks like a huge job.
I'm using this rom since 3 weeks ago and is so smooth and daily driver.
PD: Would be nice if you reference the original post of @Askuccio_DROID on P8 Lite forum:
[ROM] [PIE 9.0.0_r10] [OFFICIAL] PixysOS for Huawei Hi6250
Thanks for sharing here
After installing the ROM, you can easily get into bootloader by selecting bootloader during the reboot option in twrp. It's a bit easier than trying to get the buttons & timing right to get into bootloader to flash the stock recovery.
Hi sir thank you for this guide always wanted to flash this pixy os but no detailed instructions for pur device..
Im just a newbie here..
Can you help me find the link for the recovery for my device.
im on BLL-L22?
anyone pls help me
BLL-L22 ? You mean stock recovery? Are you on stock EMUI 8? India? If you have update.app u can easily extract it. But if you can't then I will do it for you once the download finishes.
galapagos said:
After installing the ROM, you can easily get into bootloader by selecting bootloader during the reboot option in twrp. It's a bit easier than trying to get the buttons & timing right to get into bootloader to flash the stock recovery.
Click to expand...
Click to collapse
I always find buttons easy. But yeah you can do that as well. I guess whatever suits you.
Alex19Gam said:
I'm using this rom since 3 weeks ago and is so smooth and daily driver.
PD: Would be nice if you reference the original post of @Askuccio_DROID on P8 Lite forum:
[ROM] [PIE 9.0.0_r10] [OFFICIAL] PixysOS for Huawei Hi6250
Thanks for sharing here
Click to expand...
Click to collapse
No idea how to do that but thanks for doing that. I can't even spell the name right LOL :silly:
Mannan Qamar said:
BLL-L22 ? You mean stock recovery? Are you on stock EMUI 8? India? If you have update.app u can easily extract it. But if you can't then I will do it for you once the download finishes.
Click to expand...
Click to collapse
Oh man....I think I need to rebrand first for this then get the emui 8 im still running on emui 5...im from the Philippines..
so the stock recovery should be on the updater.app the ill just extract that file then I need to look for "recovery.img"?
is that how its done?
Well first you need to update to EMUI 8. You will probably have to download Indian or China version of EMUI 8 from Firmware Finder. I suggest China. Once downloaded just rebrand/update. Now in the update.zip you will find an update.app it is around 2-3 GB. Download Huawei Firmware Extractor and then extract Recovery_ramdis.img That's it. Now flash it normally.
Reading your post I conclude you are on EMUI 5 correct? What is your model number? It might help with the rebranding.
Is the moble metwork standby battery drain bug in this rom?
Mannan Qamar said:
Well first you need to update to EMUI 8. You will probably have to download Indian or China version of EMUI 8 from Firmware Finder. I suggest China. Once downloaded just rebrand/update. Now in the update.zip you will find an update.app it is around 2-3 GB. Download Huawei Firmware Extractor and then extract Recovery_ramdis.img That's it. Now flash it normally.
Reading your post I conclude you are on EMUI 5 correct? What is your model number? It might help with the rebranding.
Click to expand...
Click to collapse
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning
Can I upgrade from EMUI 5.x ???
ubaidpks said:
Can I upgrade from EMUI 5.x ???
Click to expand...
Click to collapse
No. You will brick your phone. First upgrade to EMUI 8
jhorne917 said:
Is the moble metwork standby battery drain bug in this rom?
Click to expand...
Click to collapse
No. Battery Life is awesome. No drain on standby.
jlan007 said:
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning
Click to expand...
Click to collapse
Sure. Just follow this guide and you will be up and running in no time.
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Also recovery is flashed through fastboot using either powershell or command prompt through your PC
Go-to the above link and download HWOTA and the three update files. Extract HWOTA to the C Drive of your PC. Rename them as suggested in thread. Now transfer the files to Download folder inside HWOTA 7 folder. Now boot your phone into Bootloader and connect to the PC. Now run update.bat it will flash TWRP recovery. Once it says waiting for device to boot into TWRP, disconnect the device and hold Power & Volume Up to boot into TWRP. Once in there reconnect to Computer and press enter twice.
Now select:
Update from-> using script-> change location-> BLN-AL20. It will flash OEM-Info and then ask for your bootloader unlock code and continue. Now wait patiently for it to finish. Once flashing is complete select to keep Bootloader unlocked.
Upon first boot you won't have network signal. Solution is in the linked thread but Don't ignore it and fix signal first then after that flash Pixys OS by following OP.
Now to extract Stock Recovery follow these:
Extract the main update.zip
Download Huawei Update Extractor from XDA. Search for it.
Launch Huawei Update Extractor and go to Settings and disable first option. Now press three dots to browse and navigate to extracted folder and select Update.app
Double click on Recovery_Ramdis.img and extract it to desktop. You will get animage file and another one. Delete the other one. Now flash image file as you would flash TWRP. If you need more help, Just ask.
One question, can I transition from Resurrection Remix Oreo? Or do I have to flash EMUI 8 again?
Hello,
I am using an Honor 6X model number BLN-L21 running Emui 5.0.1.
Phone has unlocked bootloader and is rooted.
Since is unlocked OTA updates are no longer working so I am stuck on 5.0.1.
If I understood correctly I have first to upgrade to Emui 8.0 stock fw and then pass to this custom rom.
Could you please write me a small recap/tutorial I can follow to jump my phone in Emui 8?
Thanks,
Andrea.
jasonalejandro507 said:
One question, can I transition from Resurrection Remix Oreo? Or do I have to flash EMUI 8 again?
Click to expand...
Click to collapse
Yes you can but to be on the safe side I would advise to restore EMUI 8 first. Though you can go directly if you wish.
Sephiroth79 said:
Hello,
I am using an Honor 6X model number BLN-L21 running Emui 5.0.1.
Phone has unlocked bootloader and is rooted.
Since is unlocked OTA updates are no longer working so I am stuck on 5.0.1.
If I understood correctly I have first to upgrade to Emui 8.0 stock fw and then pass to this custom rom.
Could you please write me a small recap/tutorial I can follow to jump my phone in Emui 8?
Thanks,
Andrea.
Click to expand...
Click to collapse
jlan007 said:
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning
Click to expand...
Click to collapse
Sure. Just follow this guide and you will be up and running in no time.
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Also recovery is flashed through fastboot using either powershell or command prompt through your PC
Go-to the above link and download HWOTA and the three update files. Extract HWOTA to the C Drive of your PC. Rename them as suggested in thread. Now transfer the files to Download folder inside HWOTA 7 folder. Now boot your phone into Bootloader and connect to the PC. Now run update.bat it will flash TWRP recovery. Once it says waiting for device to boot into TWRP, disconnect the device and hold Power & Volume Up to boot into TWRP. Once in there reconnect to Computer and press enter twice.
Now select:
Update from-> using script-> change location-> BLN-AL20. It will flash OEM-Info and then ask for your bootloader unlock code and continue. Now wait patiently for it to finish. Once flashing is complete select to keep Bootloader unlocked.
Upon first boot you won't have network signal. Solution is in the linked thread but dont ignore it fix it first and after that flash Pixys OS by following OP.
Now to extract Stock Recovery follow these:
Extract the main update.zip
Download Huawei Update Extractor from XDA. Search for it.
Launch Huawei Update Extractor and go to Settings and disable first option. Now press three dots to browse and navigate to extracted folder and select Update.app
Double click on Recovery_Ramdis.img and extract it to desktop. You will get animage file and another one. Delete the other one. Now flash image file as you would flash TWRP. If you need more help, Just ask.
Follow along. You're both in the same boat.
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Salim0900 said:
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Click to expand...
Click to collapse
Shows you which error?
Did you try to install it via local update?
Anyway, your best bet is to install TWRP and flash the CN ROM through TWRP.
Alternatively, use miflash tool in the unofficial unbrick tool to flash the CN firmware via edl mode
Nubia package error
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Salim0900 said:
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Click to expand...
Click to collapse
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
zayidhs said:
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
Click to expand...
Click to collapse
Sorry brother but I can't see any link
Salim0900 said:
Sorry brother but I can't see any link
Click to expand...
Click to collapse
http://romdownload.nubia.com/红魔5G/V6.23/NX659J-update.zip
There you are. Its the 6.23 version of the cn rom
This directs to the 5s version but both the 5s and 5g versions of this rom are identical. ( Md5 checksum proves its the same file)
Flash from recovery. Or through TWRP
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Salim0900 said:
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Click to expand...
Click to collapse
Otg refers to a external usb device you connect to the phone. If you have the update.zip on the root of the internal memory it should show up.
If it does not. You should use the root without unlocking bootloader tutorial to install TWRP. The zip will flash from there with no problems.