I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk
lootjelo said:
You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
(I said that I cant go in Fastboot mode to flash TWRP again.)
OK I am now able to boot in bootloader after much testing I will try it.
I also had the vetlist problem downgrading from b014 to b125. But bootloader still worked. The only thing that worked for me was installing stock recovery jb via bootloader, afterwards a clean install of b014 again via stock recovery. And than I could install b125, also via stock recovery.
In short words:
1. Install stock recovery jb
2. Put (in your case) b506 to sdcard/dload folder
3. Reboot to stock recovery with automatic new installation of b506
4. Put b125 to sdcard/dload
5. Reboot to stock recovery with automatic installation of b125 withoutthe verlist fail.
This is the only way that worked for me from b014 to b125.
Sent from my P6-U00 using xda app-developers app
Install this Original_Recovery
You have to go back to stock recovery mode, do this using adb.
Then install KK Beta and then B125
RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.
Downgrade B506
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks
pave26 said:
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks
Click to expand...
Click to collapse
i have the same problem...
ThePro2014 said:
i have the same problem...
Click to expand...
Click to collapse
and solved it?
pave26 said:
and solved it?
Click to expand...
Click to collapse
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:
ThePro2014 said:
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:
Click to expand...
Click to collapse
thank you, where you downloaded( Emui 2.0) it?
pave26 said:
thank you, where you downloaded( Emui 2.0) it?
Click to expand...
Click to collapse
Look.
1-Firstly With the phone download this:
http://dl.vmall.com/c01l4l4a2y# when you are here press the blue booton and the download are in coursing.
2-then, when the download is finished, you go to download folder and extract the .zip archive, and then put the dload o your external sd!
3-after that,you have to turn off the mobile. and the method of the 3 buttons (vol - and vol + power) the recovery will be updated!
4 - after the end of the flashing restarted again, with that before we get We traveled for updated repair fail.
5-'ll be back on the B506, now just stick a stock with dload on the external card and the 3 buttons you flash the stock rom that you have chosen with JB! regards :good:
Thanks ,,,,, it works :good:
If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
alex.79 said:
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.
Click to expand...
Click to collapse
I can't download from that link. anybody knows another link ?Thank you !
Morar Ioan Cornel said:
I can't download from that link. anybody knows another link ?Thank you !
Click to expand...
Click to collapse
Here has the fast mirror: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
thanks !!!
Falcifer said:
If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
Click to expand...
Click to collapse
I was testing the ART mode on the P6. I replaced the two system files. After some misbehavior of the ROM I wanted to go back to the B125. When doing a factory reset I am stuck on the Startup-Agent when choosing the WLAN(It stops and reverts to Language select -> so loop)
Can I flash this just with TRWP from dload folder on my SD-Card?
RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
I have same problem, after upgrading to B506, mobile network doesnt work!!
Any one else has same problem?
Related
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
mstaskovan said:
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
Click to expand...
Click to collapse
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
mstaskovan said:
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
Click to expand...
Click to collapse
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
richish said:
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
Click to expand...
Click to collapse
sorry i am layman and my english is very bad
I am installed twrp 2.6.3.5 and I am looking STOCK P6 recovery
richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
I actually have the same question. Cannot B118 recovery brick your phone?
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
mstaskovan said:
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Click to expand...
Click to collapse
thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
Thanks
Now I need a phone
Try and write whether it succeeded
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
mstaskovan said:
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
Click to expand...
Click to collapse
As I understand surdu_petru stated that you can flash TWRP 2.6.3.7 only on KK Beta, and 2.6.3.3 only on B118 unlocked firmware.
For flashing any custom ROM you have to read what ROM developer says. If developer of the custom ROM says "you can only flash it on B118", then you must be on B118. I would not try to flash it on B125 unless I was brave/dumb!
want to go back to JellyBean B125 from Kitkat beta
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
I'd advice you to flash HYD52ROM KK. Great performance
Sent from my P6-U06 using XDA Premium 4 mobile app
huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
First, please install stock recovery KitKat, than you are able to flash any firmware you want by : external sdcard/dload/UPDATE.APP method !
Good luck !
unable to go stock recovery
kindly give some elaborated tutorial link as how to go back to stock recover & stock rom
Sorry guys, I'm new to Android and all of this and i'm in a foreign country so i don't know what to do.
I have a B506 with KitKat, but i want to downgrade to B125, can anyone help me?
I know this question has probably been asked before, but i couldn't find it and i really don't know how to do this, so sorry for being a noob.
AriaE132 said:
Sorry guys, I'm new to Android and all of this and i'm in a foreign country so i don't know what to do.
I have a B506 with KitKat, but i want to downgrade to B125, can anyone help me?
I know this question has probably been asked before, but i couldn't find it and i really don't know how to do this, so sorry for being a noob.
Click to expand...
Click to collapse
Flash through adb stock recovery. Put update.app B125 in dload folder on sdcard and press volume up + volume down + power button until the phone starts updating.
BeyondTheHorizon said:
Flash through adb stock recovery. Put update.app B125 in dload folder on sdcard and press volume up + volume down + power button until the phone starts updating.
Click to expand...
Click to collapse
This will not help.
For downgrade from B506 to B125 you will need a middle step. First flash that: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4 via stock recovery, after that you will able to flash B125.
alex.79 said:
This will not help.
For downgrade from B506 to B125 you will need a middle step. First flash that: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4 via stock recovery, after that you will able to flash B125.
Click to expand...
Click to collapse
Not true. LOL The middle step it's a EMUI ZIP. That's so crazy. Man, don't make people follow your nonsense advice.
BeyondTheHorizon said:
Not true. LOL The middle step it's a EMUI ZIP. That's so crazy. Man, don't make people follow your nonsense advice.
Click to expand...
Click to collapse
alex.79 is right, you can't downgrade directly from B506. That middle step is needed. So the nonsense advice is yours.
primo said:
alex.79 is right, you can't downgrade directly from B506. That middle step is needed. So the nonsense advice is yours.
Click to expand...
Click to collapse
Trust me. I'm right, you're wrong.
BeyondTheHorizon said:
Not true. LOL The middle step it's a EMUI ZIP. That's so crazy. Man, don't make people follow your nonsense advice.
Click to expand...
Click to collapse
My frend don't give advice on things you are not quite clear for you. In this case nonsense advice is yours.
alex.79 said:
My frend don't give advice on things you are not quite clear for you. In this case nonsense advice is yours.
Click to expand...
Click to collapse
No such step needed, you just try to make downloads with that link.
Tested without that step and all went well.
I've downgraded twice but never used that file. What is true (if i remember well) every time, at the firs boot, phone got stuck at logo. Installed the same firmware again and worked. At the second install, i think the script saw that something was not in place and did a factory reset. Maybe a factory reset should be done before downgrading.
BeyondTheHorizon said:
Flash through adb stock recovery. Put update.app B125 in dload folder on sdcard and press volume up + volume down + power button until the phone starts updating.
Click to expand...
Click to collapse
Actually, this method works. I did not need the middle step. Just put the download update.app in the sdCard root AND in the dload folder, and then do a stock recovery boot.
In fact, I used the systems local update and got B125 no problem at all.
Sent from my HUAWEI P7-L10 using XDA Premium HD app
which stock recovery is needed to do a downgrade from kk to jb?
i'm a little confused what stock recovery to take..
there are many possible stock recoverys out there..
Sent from my P6-U06 using XDA Free mobile app
alex.79 said:
This will not help.
For downgrade from B506 to B125 you will need a middle step. First flash that: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4 via stock recovery, after that you will able to flash B125.
Click to expand...
Click to collapse
this is the right way to do
big probelms in a downgrade
i had b507 by recicla .. to b125 and then the prolems started ... my cable disconnects original charger didn't work and the data cable gave me error 43 on compute after sercing for a solutioun returned to official kit kat and a miricle happend everything works can't return to jelly bin without those bugs to reapear .. what might be the problem .. i've wrote eaven the boot and nothing same thing .. so can't go to non of the roms from jelly bean tried b111,b125,b132 and all gave me the same thing .. now i'll stay at b511 till i find a soultion
error details .. on charger disconect after a sec or two , the other chargers work (old huawei one from a sonic a motorola charger and a non-branded one)
on calble one computer disconnects after 3 sec second atemt gabe me error 43
next computer error 43 from start
on b511 everything works
alex.79 said:
This will not help.
For downgrade from B506 to B125 you will need a middle step. First flash that: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4 via stock recovery, after that you will able to flash B125.
Click to expand...
Click to collapse
@Alex
can u post here a new link i need this file to flash to my phone as well to update!
WBR
ReyTech.
Hello guys i need the recovery img too... can someone please provide i link with it please... !!
Using this http://forum.xda-developers.com/showthread.php?t=2433454 tool can get you any needed .img files from wanted firmware, supposing you have the actual file (update.app) from the firmware.
Sent from my SM-G850F
hi guys
my p6 was in 4.4.2 & suddently i had no voice on my phone.caz of this i downgrade to 4.2 b130 but my phone got in black screen after showing huawei logo.now after tested some firmware like b132 b125 b117 b118 & some custom firmware i coudn't bring my phone up.but i understood whenever im using chinnies frimware like 117 & 118 my phone showing android logo and 1 time show android app to process but stuck on it for a long time & battery get hot and died after 30 min.
after 4 days and searching on the internet i coldnt solve this problem.i hope somebody here can help me with this big problem.
asphalt30000 said:
hi guys
my p6 was in 4.4.2 & suddently i had no voice on my phone.caz of this i downgrade to 4.2 b130 but my phone got in black screen after showing huawei logo.now after tested some firmware like b132 b125 b117 b118 & some custom firmware i coudn't bring my phone up.but i understood whenever im using chinnies frimware like 117 & 118 my phone showing android logo and 1 time show android app to process but stuck on it for a long time & battery get hot and died after 30 min.
after 4 days and searching on the internet i coldnt solve this problem.i hope somebody here can help me with this big problem.
Click to expand...
Click to collapse
Someone help me plZzzzzzzZz
asphalt30000 said:
Someone help me plZzzzzzzZz
Click to expand...
Click to collapse
Install B510
FutureIntelligence said:
Install B510
Click to expand...
Click to collapse
tnx for replying but for instaling b510 you have to install from b132. but it cant up in any rom?!!!
asphalt30000 said:
tnx for replying but for instaling b510 you have to install from b132. but it cant up in any rom?!!!
Click to expand...
Click to collapse
is there anybody can help me?
asphalt30000 said:
is there anybody can help me?
Click to expand...
Click to collapse
Before downgrading from KK to JB you have to install this:
http://dl.vmall.com/c01l4l4a2y#
Copy to external sd card to dload folder and use 3 button method to flash. After that you can try JB rom downgrade.
iwtfmcl said:
Before downgrading from KK to JB you have to install this:
http://dl.vmall.com/c01l4l4a2y#
Copy to external sd card to dload folder and use 3 button method to flash. After that you can try JB rom downgrade.
Click to expand...
Click to collapse
tnx my frnd but i already did this way.but it didnt work
I need someone to help . PlzZzZZZZ
asphalt30000 said:
I need someone to help . PlzZzZZZZ
Click to expand...
Click to collapse
Have you tried doing a factory reset?
Remove your SD card, then boot into recovery via the 3-button method.
Select "Data/factory reset", and "clear cache", then reboot system. You can then insert your SD card again.
Hopefully your phone will boot correctly.
I have sucsh problem too... But no sucsess till now
I did all above you said
miz_pimp said:
Have you tried doing a factory reset?
Remove your SD card, then boot into recovery via the 3-button method.
Select "Data/factory reset", and "clear cache", then reboot system. You can then insert your SD card again.
Hopefully your phone will boot correctly.
Click to expand...
Click to collapse
Ya bro i did it. thousand time
asphalt30000 said:
Ya bro i did it. thousand time
Click to expand...
Click to collapse
Then flash the device again using the 3-button method immediately after?
miz_pimp said:
Then flash the device again using the 3-button method immediately after?
Click to expand...
Click to collapse
I know what u mean bro but whenever i want to flash any roms i did it this way
asphalt30000 said:
I know what u mean bro but whenever i want to flash any roms i did it this way
Click to expand...
Click to collapse
Ok, then. Just to make sure, you do have the international version of the p6, right? P6-U06?
I just can't understand how nothing is working for you, although we already know that your system IS able to boot with the Chinese firmware, just not completely.
miz_pimp said:
Ok, then. Just to make sure, you do have the international version of the p6, right? P6-U06?
I just can't understand how nothing is working for you, although we already know that your system IS able to boot with the Chinese firmware, just not completely.
Click to expand...
Click to collapse
Tnx alot bro for replying. Ya i downloaded international rom for p6 u06. All of them was for u06 . As i said b125 b132 b130 b117 b118 & ...
asphalt30000 said:
Tnx alot bro for replying. Ya i downloaded international rom for p6 u06. All of them was for u06 . As i said b125 b132 b130 b117 b118 & ...
Click to expand...
Click to collapse
Yes, but what I was asking is if the device you have is the P6-U06.
Anyway, I'm afraid I don't know how else to help you, except to suggest taking it to a service centre.
Or as a last resort, try installing TWRP. There is a guide in the TWRP thread.
PS. I'm a girl. [emoji4]
miz_pimp said:
Yes, but what I was asking is if the device you have is the P6-U06.
Anyway, I'm afraid I don't know how else to help you, except to suggest taking it to a service centre.
Or as a last resort, try installing TWRP. There is a guide in the TWRP thread.
PS. I'm a girl. [emoji4]
Click to expand...
Click to collapse
Oh sryyyy???my sis
Yeah no one can help me??. I have been searching all of the internet but nothing helps me
I instaled twrp & 3 custom rom but they are like chinnies rom unfortunately.
Again tnx my siiiis
Hi, I had a similar problem last week and here is how I finally could bring my P6 back to life:
1) Install TWRP and wipe system, data and cache
2) Install CM11 ROM and boot with it
3) Put back the B510 stock recovery
4) Install B116 stock rom by putting its Update.app in the dload folder - reboot with the three buttons and it went in recovery and I selected install from external sdcard
5) Boot with this rom, then upgrade to any verstion you like.
I hope this procedure will work for you too.
Martin
sko4a said:
Hi, I had a similar problem last week and here is how I finally could bring my P6 back to life:
1) Install TWRP and wipe system, data and cache
2) Install CM11 ROM and boot with it
3) Put back the B510 stock recovery
4) Install B116 stock rom by putting its Update.app in the dload folder - reboot with the three buttons and it went in recovery and I selected install from external sdcard
5) Boot with this rom, then upgrade to any verstion you like.
I hope this procedure will work for you too.
Martin
Click to expand...
Click to collapse
Tnx alot my frnd . I will do this and i will say the result. I hope sooooo
no its not working for me . still stucking in android logo :crying::crying::crying::crying::crying:
Hello,
I've bot a error when i trie to update my phone to any kk version with the local update methode or three buttons method :
I've tried B132, B512, B634 and the update to downgrade to JB but always the same error, flashing via adb Twrp for KK then reflask stock_B118 recovery but no change
there are no problems flashing a custom rom with twrp (actually i use B513repack, and before i used B510 custom rom).
Don't find a solution for this problem .....
Need help, i want to try the B634....
bab1c said:
Hello,
I've bot a error when i trie to update my phone to any kk version with the local update methode or three buttons method :
I've tried B132, B512, B634 and the update to downgrade to JB but always the same error, flashing via adb Twrp for KK then reflask stock_B118 recovery but no change
there are no problems flashing a custom rom with twrp (actually i use B513repack, and before i used B510 custom rom).
Don't find a solution for this problem .....
Need help, i want to try the B634....
Click to expand...
Click to collapse
Hi
Try to flash your B510 custom and flash with adb the B510 stock recovery in the second post here > http://forum.xda-developers.com/showthread.php?t=2709353 .
flashing via adb Twrp for KK then reflask stock_B118 recovery but no change
Click to expand...
Click to collapse
Because if you flash TWRP (for KK) then a stock recovery B118 (for JB) it's normal it's don't work. And if I don't say something wrong B118 is a chinese version.
Good luck
Ok i'll try this now....
Edit :
Flash recovery.img via fastboot ..... same result trying update B634 ????
bab1c said:
Ok i'll try this now....
Edit :
Flash recovery.img via fastboot ..... same result trying update B634 ????
Click to expand...
Click to collapse
I Don't know anything about this version you can try ..
Skyllery said:
I Don't know anything about this version you can try ..
Click to expand...
Click to collapse
here : http://forum.xda-developers.com/ascend-p6/general/b634-kitkat-t2861981
bab1c said:
here : http://forum.xda-developers.com/ascend-p6/general/b634-kitkat-t2861981
Click to expand...
Click to collapse
Yeah I have read but i didn't test it. It's quiet strange the two Update.app and the new numeration.
Skyllery said:
Yeah I have read but i didn't test it. It's quiet strange the two Update.app and the new numeration.
Click to expand...
Click to collapse
i've allready seen another update with 2 UPDATE files, doesn't remenber version....
I'm having exactly the same problem cant update to any version. Always says ' Check Module Verlist FAIL'
SOLVED
I found a solution to that problem.
Just use another kitkat recovery image to update. In my case,
https://www.androidfilehost.com/?fid=23329332407568599
did the trick.
benshannon said:
I found a solution to that problem.
Just use another kitkat recovery image to update. In my case,
https://www.androidfilehost.com/?fid=23329332407568599
did the trick.
Click to expand...
Click to collapse
It worked, the system is flashing.
I think i forgot to flash B510 boot.img .....
Thanks
Since everybody knows how to upgrade OTA or from LOCAL UPGRADE and go from 4.2 to 4.4 I've decided to let you know how to easily downgrade from 4.4 to 4.2 AND / OR change from Chinese to International Huawei Firmware!
The method I describe here, I've found in some German forums after long search. It really works! 100% tested on my device Ascend P6-U06!
!!! CAUTION !!!
Before you begin, you must be sure you have STOCK recovery, NOT TWRP one!!! This flashable files work and can be flashed only thru STOCK recovery!
If you have TWRP recovery and don't know how to go back to STOCK one, look the SECOND POST in THIS thread and follow the steps there, before you begin this procedure! ONLY after you're done with turning back your STOCK recovery and you're sure of that, you can continue with the following steps:
To Downgrade from Android 4.4 to Android 4.2 / Switch from Chinese to International ROM, do the following:
1. Download this (Unicom 2.0 Downgrade Flashable ZIP) and flash it thru STOCK RECOVERY - https://mega.co.nz/#!ZYVixBqa!JNMLRB2DUVKlGpZVqPJbIsdbVPijks7r1Mtk46KGrmE
This is a 240MB archive, also known as Unicom 2.0 - something like ROM, but it is not an entire ROM, but just part of it, that must be flashed thru stock recovery. You must unzip it, take the dload folder that is inside and put it on you sdcard. Than you can flash it like a local update thru the updater, or you can forcefully flash it - pres power+ volume down+ volume up and it will take you directly to flashing updates thru stock recovery. When you flashed it, you can once again boot normally into you Android device. Now you must take dload folder from the B132 zip (from the link below), once again put it on your sdcard and flash it again using the same methods again thru stock recovery. The cool thing is that the first little flashable zip allows you not just to downgrade from 4.4 to 4.2, but also change from China to International ROMs. So when you're finished flashing this thru stock recovery, flash the official international B125 or B132, wait for the system to install and boot into android. When it is finally booted, you can flash B510 or B512/513 - whatever you want. In my case when I downgraded to B132, after the first boot the system prompted me, that it can be updated directly to B520 OTA. I've updated and now I am once again with International firmware​
2. Download this (B132 International 4.2 Firmware) and flash it thru STOCK RECOVERY ONLY if you already flashed the file in the step above! - https://mega.co.nz/#!5JkAzKpB!nFqfHIHfWo6EO4XPqjO3Gga6a3XWWnqqZxZDZpzAdWE
3. Boot into Official Huawei Android 4.2 firmware and check for update OTA. If you have one - install it. If you don't - you can flash B510 or B512/513/etc...
Enjoy International firmware line again! This method can also be used just to downgrade form Android 4.4 to Android 4.2!
Files are not flashable thru TWRP - please, use ONLY Stock Recovery!
------------------------------------------------------------------------------------------
Please, hit THANKS, if this thread helped you!
question: which stock recovery should i take if i have b635 (there is no available official b635 rom - only repack)..
i want to downgrade because i want to get the b520 fw..
maybe you have an advice..
thanks in advance..
blueIBI said:
question: which stock recovery should i take if i have b635 (there is no available official b635 rom - only repack)..
i want to downgrade because i want to get the b520 fw..
maybe you have an advice..
thanks in advance..
Click to expand...
Click to collapse
Just try with the stock B510 recovery from the second post in the TWRP recovery theme! I think stock recovery is the same for all 4.4 ROMs and it doesn't matter which one. I recommend the one that I told you about! Should work! I was with Chinese B706 ROM and TWRP. To downgrade I've flashed the B510 stock recovery first and then - step by step as I wrote above.
thanks..will try to do that..
blueIBI said:
thanks..will try to do that..
Click to expand...
Click to collapse
I have a question for you - I see that you modified the .prop file for the local channel, to get louder sound in headphones (from your signature). I've tried to do this today, but when I try to modify the file every time it says - cannot save changes, file cannot be modified, changes not saved! I have root and I've mounted / and /system as writable! I can edit build.pro without any problem and save the changes, but this file - I can't! How did you edited it and how can I edit it too?
Thank you!
UP!
Moderators, please consider to make this thread sticky / important! Thank you!
did not work for me..
i made the following:
flashed stock recovery from b510
took a fresh 4gb sdcard with dload folder on it..inside this folder was the update.app from the unicom rom..
then turned off device..
then pressed power,vol + & - together and held it 'til the recovery screen with yellow writing appeared..
it started to flash..but on the point where the verlist check begins it tells me "fail"!!!..
so what to do now???
i know this procedure..did it with the b506 rom and it worked..but with the b635 rom it won't work..
blueIBI said:
did not work for me..
i made the following:
flashed stock recovery from b510
took a fresh 4gb sdcard with dload folder on it..inside this folder was the update.app from the unicom rom..
then turned off device..
then pressed power,vol + & - together and held it 'til the recovery screen with yellow writing appeared..
it started to flash..but on the point where the verlist check begins it tells me "fail"!!!..
so what to do now???
i know this procedure..did it with the b506 rom and it worked..but with the b635 rom it won't work..
Click to expand...
Click to collapse
Try to flash B706 Chinese EMUI 3.0 new Development edition ROM from the official Huawei web site. If you flash it over the B635 successfully, then you must be able to do this procedure to turn back into international line of ROMs and to B132 4.2 ROM. after that you can flash B510 again. Try this method! I'm pretty sure that it will be possible to flash B706 directly over B635, even than that in the official website it is recommended to update only from B508SP02 official chinese rom. I had success with updating directly to B706 from B512, but if you can't go from B635, try to flash B508SP02 first, than B706 and than downgrade! Should work! Good Luck!
got it..
i just had to flash the b125!!!
so easy..i just flashed the stock recovery of b510..made a force update with the b125 (not the p6 unicom 2.0!!!!)..and now i just upgrade my p6 to b520 via OTA!!!
thanks for your help and time!
blueIBI said:
got it..
i just had to flash the b125!!!
so easy..i just flashed the stock recovery of b510..made a force update with the b125 (not the p6 unicom 2.0!!!!)..and now i just upgrade my p6 to b520 via OTA!!!
thanks for your help and time!
Click to expand...
Click to collapse
You're welcome!
ThunderBird891 said:
Try to flash B706 Chinese EMUI 3.0 new Development edition ROM from the official Huawei web site. If you flash it over the B635 successfully, then you must be able to do this procedure to turn back into international line of ROMs and to B132 4.2 ROM. after that you can flash B510 again. Try this method! I'm pretty sure that it will be possible to flash B706 directly over B635, even than that in the official website it is recommended to update only from B508SP02 official chinese rom. I had success with updating directly to B706 from B512, but if you can't go from B635, try to flash B508SP02 first, than B706 and than downgrade! Should work! Good Luck!
Click to expand...
Click to collapse
You installed the b706 on b512 ??
Why did they say that to upgrade only on b508
After installing are you facing any problems
Plz reply
Sent from my HUAWEI P6-U06
macklon said:
You installed the b706 on b512 ??
Why did they say that to upgrade only on b508
After installing are you facing any problems
Plz reply
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
No. No problems at all. I think just the upgrade took a little while that usual but it flashed like charm over the B512 without any problems! I think the flashing from B508 is just a recommendation, because the B508SP02 is the latest chinese ROM, and this B706 is Chinese developers edition...
ThunderBird891 said:
No. No problems at all. I think just the upgrade took a little while that usual but it flashed like charm over the B512 without any problems! I think the flashing from B508 is just a recommendation, because the B508SP02 is the latest chinese ROM, and this B706 is Chinese developers edition...
Click to expand...
Click to collapse
So from b512 to b706 with dload and update
Sent from my HUAWEI P6-U06
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
Which Rom are you using pltl
Sent from my HUAWEI P6-U06
macklon said:
So from b512 to b706 with dload and update
Sent from my HUAWEI P6-U06
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
Which Rom are you using pltl
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
That's right! Download the official B706 from Huawei EMUI website, unzip it, put the dload folder in you sdcard and then i recomend to make Local update first. If it doesn't want to update thru local update option in the Update Application, then try with forceful update - press and hold power + volume up + volume down and wait until phone boots into stock recovery mode! The update can only be done with stock recovery! If you're on TWRP, that you must go back to stock!
**** uc browser sucks
I kept to download b508 due to some problem I have to pause it only 36mb was remaining and when I resumed it showed a error was not able to resume the download so I re downloaded the b508 it got downloaded now
So kept to download b706 the same thing happened only 50mb was remaining for the download to complete it showed a error again but this time I did even pause ****
And now someone told me we can update b706 on b512 no need of b508 ****
Today ill download b706 on chrome
Sent from my HUAWEI P6-U06
Hi,in my Huawei Ascend P6-U06 i installed firmware B513+EMUI 2.3.
I tried to downgrade with this method but it fails when i flash Unicom 2.0 (i follow the instructions:download it..unzip then put UPDATE.app in dload folder of my sdcard).When i flash it,itfails(i have Stock Recovery,never installed TWRP).
Is this method valid also for B513+EMUI2.3?Or maybe i've done something wrong?
Any help is very appreciate..Thanks
gabrymed said:
Hi,in my Huawei Ascend P6-U06 i installed firmware B513+EMUI 2.3.
I tried to downgrade with this method but it fails when i flash Unicom 2.0 (i follow the instructions:download it..unzip then put UPDATE.app in dload folder of my sdcard).When i flash it,itfails(i have Stock Recovery,never installed TWRP).
Is this method valid also for B513+EMUI2.3?Or maybe i've done something wrong?
Any help is very appreciate..Thanks
Click to expand...
Click to collapse
Try to flash it forceful with holding all buttons together, or try to copy not only the update.app, but the whole dload folder from the archive. If it's not working, just try to flash B510 or B512 on top of B513 - this should work. After that you can try to downgrade to 4.2 again with the same method!
ThunderBird891 said:
Try to flash it forceful with holding all buttons together, or try to copy not only the update.app, but the whole dload folder from the archive. If it's not working, just try to flash B510 or B512 on top of B513 - this should work. After that you can try to downgrade to 4.2 again with the same method!
Click to expand...
Click to collapse
Thanks for your help!
Cause i'm a newbie,i explain you step by step what i've done:
I follow carefully your instructions(part 1),i try to flash it with local update,but i get message "fail"
After that,in stock recovery,i didn't reboot,but i move to option "apply update from external storage" and after a few seconds i have messages:
-wiping cache (at package request)...
-formatting cache
-cache wipe complete
-install from sd card complete
-cust copying files
-copy cust files successed!
It means that the process has been successful ??? If yes then i proceed to downgrade...
If no,i'll try with your advice to flash B510 or B512 on top of B513...
gabrymed said:
Thanks for your help!
Cause i'm a newbie,i explain you step by step what i've done:
I follow carefully your instructions(part 1),i try to flash it with local update,but i get message "fail"
After that,in stock recovery,i didn't reboot,but i move to option "apply update from external storage" and after a few seconds i have messages:
-wiping cache (at package request)...
-formatting cache
-cache wipe complete
-install from sd card complete
-cust copying files
-copy cust files successed!
It means that the process has been successful ??? If yes then i proceed to downgrade...
If no,i'll try with your advice to flash B510 or B512 on top of B513...
Click to expand...
Click to collapse
The process is successful! You must now reboot an go in your android. Now you can copy the other firmware (b510) to your dload folder in sdcard and then try to downgrade! It should work fine!!!
ThunderBird891 said:
The process is successful! You must now reboot an go in your android. Now you can copy the other firmware (b510) to your dload folder in sdcard and then try to downgrade! It should work fine!!!
Click to expand...
Click to collapse
Ok,downgraded with success! Now i receive an OTA upgrade to western europe B520 but i think i'll wait for the moment...
Thanks ThunderBird for your help,very appreciate!