Develop Bugs

How to revert to stock recovery after install TWRP 2.6.3.5

Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response

mstaskovan said:
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
Click to expand...
Click to collapse
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420

richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542

mstaskovan said:
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
Click to expand...
Click to collapse
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5

richish said:
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
Click to expand...
Click to collapse
sorry i am layman and my english is very bad
I am installed twrp 2.6.3.5 and I am looking STOCK P6 recovery

richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
I actually have the same question. Cannot B118 recovery brick your phone?

Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks

Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
mstaskovan said:
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Click to expand...
Click to collapse

thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
Thanks
Now I need a phone
Try and write whether it succeeded

Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse

mstaskovan said:
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
Click to expand...
Click to collapse
As I understand surdu_petru stated that you can flash TWRP 2.6.3.7 only on KK Beta, and 2.6.3.3 only on B118 unlocked firmware.
For flashing any custom ROM you have to read what ROM developer says. If developer of the custom ROM says "you can only flash it on B118", then you must be on B118. I would not try to flash it on B125 unless I was brave/dumb!

want to go back to JellyBean B125 from Kitkat beta
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware

huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
I'd advice you to flash HYD52ROM KK. Great performance
Sent from my P6-U06 using XDA Premium 4 mobile app

huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
First, please install stock recovery KitKat, than you are able to flash any firmware you want by : external sdcard/dload/UPDATE.APP method !
Good luck !

unable to go stock recovery
kindly give some elaborated tutorial link as how to go back to stock recover & stock rom

Downgrade from B506 to B125 failed

I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:

You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk

lootjelo said:
You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
(I said that I cant go in Fastboot mode to flash TWRP again.)
OK I am now able to boot in bootloader after much testing I will try it.

I also had the vetlist problem downgrading from b014 to b125. But bootloader still worked. The only thing that worked for me was installing stock recovery jb via bootloader, afterwards a clean install of b014 again via stock recovery. And than I could install b125, also via stock recovery.
In short words:
1. Install stock recovery jb
2. Put (in your case) b506 to sdcard/dload folder
3. Reboot to stock recovery with automatic new installation of b506
4. Put b125 to sdcard/dload
5. Reboot to stock recovery with automatic installation of b125 withoutthe verlist fail.
This is the only way that worked for me from b014 to b125.
Sent from my P6-U00 using xda app-developers app

Install this Original_Recovery

You have to go back to stock recovery mode, do this using adb.
Then install KK Beta and then B125

RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.

Downgrade B506
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks

pave26 said:
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks
Click to expand...
Click to collapse
i have the same problem...

ThePro2014 said:
i have the same problem...
Click to expand...
Click to collapse
and solved it?

pave26 said:
and solved it?
Click to expand...
Click to collapse
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:

ThePro2014 said:
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:
Click to expand...
Click to collapse
thank you, where you downloaded( Emui 2.0) it?

pave26 said:
thank you, where you downloaded( Emui 2.0) it?
Click to expand...
Click to collapse
Look.
1-Firstly With the phone download this:
http://dl.vmall.com/c01l4l4a2y# when you are here press the blue booton and the download are in coursing.
2-then, when the download is finished, you go to download folder and extract the .zip archive, and then put the dload o your external sd!
3-after that,you have to turn off the mobile. and the method of the 3 buttons (vol - and vol + power) the recovery will be updated!
4 - after the end of the flashing restarted again, with that before we get We traveled for updated repair fail.
5-'ll be back on the B506, now just stick a stock with dload on the external card and the 3 buttons you flash the stock rom that you have chosen with JB! regards :good:

Thanks ,,,,, it works :good:

If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
alex.79 said:
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.
Click to expand...
Click to collapse

I can't download from that link. anybody knows another link ?Thank you !

Morar Ioan Cornel said:
I can't download from that link. anybody knows another link ?Thank you !
Click to expand...
Click to collapse
Here has the fast mirror: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4

thanks !!!

Falcifer said:
If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
Click to expand...
Click to collapse
I was testing the ART mode on the P6. I replaced the two system files. After some misbehavior of the ROM I wanted to go back to the B125. When doing a factory reset I am stuck on the Startup-Agent when choosing the WLAN(It stops and reverts to Language select -> so loop)
Can I flash this just with TRWP from dload folder on my SD-Card?

RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
I have same problem, after upgrading to B506, mobile network doesnt work!!
Any one else has same problem?

ODIN?

I got failed to start /system/build.prop No such file... when I tried to update... Anyone know if there is way to do it with odin? Or have any solutions?

Odin is only for Samsung devices?

PulseDroid said:
Odin is only for Samsung devices?
Click to expand...
Click to collapse
so what can I do than, I wiped everythink because of update so I only have flashed B510 recovery which is keeping telling me Huawei SD card update fail if I try to update to B634 , and that there is missing system/build.prop If i try to flash B513

maticex said:
so what can I do than, I wiped everythink because of update so I only have flashed B510 recovery which is keeping telling me Huawei SD card update fail if I try to update to B634 , and that there is missing system/build.prop If i try to flash B513
Click to expand...
Click to collapse
Try to flash B132 first and then install B634. B132 dosnt check build.prop if i remember right (or something), it worked when i got build.prop error last time in kitkat rom...

ADHDDHDA said:
Try to flash B132 first and then install B634. B132 dosnt check build.prop if i remember right (or something), it worked when i got build.prop error last time in kitkat rom...
Click to expand...
Click to collapse
Do you know why is there SD card update fail?

pls pls help my bricked ascend p6 pls pls

I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device

sasadeaunty said:
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
Click to expand...
Click to collapse
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help

hi
taaeem said:
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
Click to expand...
Click to collapse
Hi, if i reboot without plug-in the usb, it will also fail like (attached photo124)

hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery

blueIBI said:
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
Click to expand...
Click to collapse
Different stock recovery only can install certain ROM? I tried B125 already cannot. Any other recommend ROM for me to try? I rmb I flashed a quite latest stock recovery

then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..

blueIBI said:
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
Click to expand...
Click to collapse
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.

sasadeaunty said:
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
Click to expand...
Click to collapse
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4

maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..

miz_pimp said:
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
hi miz_pimp, if i do not plug in the usb cable, it will directly go into fail as showed in the picture124 i attached below, I do not rmb what firmware i installed previously, but I did a full wipe, I do not think thr is still firmware inside beside stock recovery.
Click to expand...
Click to collapse

blueIBI said:
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
Click to expand...
Click to collapse
I tried with different sdcard without usb plugged in, still giving me fail

very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..

blueIBI said:
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
Click to expand...
Click to collapse
i cant even flash my recovery, when i use adb, it just shows me waiting for device, then no response. I tried most of the ways but no one can help......

hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..

blueIBI said:
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
Click to expand...
Click to collapse
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess

miz_pimp said:
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Click to expand...
Click to collapse
sasadeaunty said:
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
Click to expand...
Click to collapse
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.

miz_pimp said:
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
Click to expand...
Click to collapse
hi miz_pimp, thank you so muchhhhhhhhhhhhh, I am able to recover my p6 with the firmware u linked to me. Really thank you and thanks for others too for helping me too. Thanks all.

Glad you got it sorted, and you're very welcome. [emoji2]

Downgrade from B708 to JB error, HELP

Hello,
I upgrade form b118 to b707 and next to b708 my huawei p6, and I don't see I need b508 to go b707. My mistake.
Now my GPS don't work, I think it don't work earlier, but I don't sure.
I want back to b132 and lock bootloader, but I can not downgrade from b708.
I think I tried everythink.
First I try instaled UPDATE.APP which can downgrade from KK to JB, but I have vendorlist fail.
I wiped everyting, instaled recovery and boot.img from b508 and again try instal this downgrade UPDATE but still is vendor list fail.
I instaled custom ROM based on b508 and tried downgrade but again this fail:silly:. Please help, I haven't idea what doing now.
Sorry for my english, I am working at it.

Downgrade
aknorts said:
Hello,
I upgrade form b118 to b707 and next to b708 my huawei p6, and I don't see I need b508 to go b707. My mistake.
Now my GPS don't work, I think it don't work earlier, but I don't sure.
I want back to b132 and lock bootloader, but I can not downgrade from b708.
I think I tried everythink.
First I try instaled UPDATE.APP which can downgrade from KK to JB, but I have vendorlist fail.
I wiped everyting, instaled recovery and boot.img from b508 and again try instal this downgrade UPDATE but still is vendor list fail.
I instaled custom ROM based on b508 and tried downgrade but again this fail:silly:. Please help, I haven't idea what doing now.
Sorry for my english, I am working at it.
Click to expand...
Click to collapse
Hello. try this.
Extract UPDATE.APP of B132 with huawei updateextractor,edit verlist.txt with notepad and add P6-U06V100R001C17B708 to
file and save it.now repack with huawei updateextractor choose folder that you extract UPDATE.APP in previous step.
copy new UPDATE.APP in dload folder of sdcard and update again with dload metod.
this is just an idea and im not sure if it workks.try and seee if it works.

Ok, I did it, and verlist is ok, but stop at CUST. :/ Any idea what do now?

probably same problem here
http://forum.xda-developers.com/ascend-p6/help/b708-root-flash-twrp-downgrade-t2991236
---------- Post added at 08:46 PM ---------- Previous post was at 08:11 PM ----------
try it!
i will test it too
http://forum.xda-developers.com/ascend-p6/general/how-to-downgrade-4-4-4-2-change-chinese-t2951566
give me feedback

I tried it before, I didn't work for me.

aknorts said:
Ok, I did it, and verlist is ok, but stop at CUST. :/ Any idea what do now?
Click to expand...
Click to collapse
Flash cust,img of B132 in fastboot mode ( fastboot flash cust 12.cust.img) then flash UPDATE.APP.if you get error again,
repack without cust.img and flash generated UPDATE.APP,hope this work.

Thanks, I add b708 to verlist and change cust from 708, repack it and instal. It instaled but dont work..... but I instal clear b118 and everything fine. GPS work too. Thanks for help.

HELP !!!
aknorts said:
Thanks, I add b708 to verlist and change cust from 708, repack it and instal. It instaled but dont work..... but I instal clear b118 and everything fine. GPS work too. Thanks for help.
Click to expand...
Click to collapse
HI,
I am new here and sorry for my bad english.
I update my P6 on b708 and emui 3,0 is great but problem is that font is to small.
I can change font size but not size of menu letters.
i read everything on this forums but still i dont now how to downgrade B708 firm.
Please somebody help do downgrade my P6 from B708 to B512, B520 !!!

Laske1982 said:
HI,
I am new here and sorry for my bad english.
I update my P6 on b708 and emui 3,0 is great but problem is that font is to small.
I can change font size but not size of menu letters.
i read everything on this forums but still i dont now how to downgrade B708 firm.
Please somebody help do downgrade my P6 from B708 to B512, B520 !!!
Click to expand...
Click to collapse
i have downgrade from 708 to B132 as you said the font size is too small and I found the older version is better than the new ones. You have to flash recovery.img and boot.img throught adb procedure which you will find the details in this forum. After that you put the requested image on sd card and flash it

dream_fun said:
i have downgrade from 708 to B132 as you said the font size is too small and I found the older version is better than the new ones. You have to flash recovery.img and boot.img throught adb procedure which you will find the details in this forum. After that you put the requested image on sd card and flash it
Click to expand...
Click to collapse
Can you post the link of that procedure ?

Here are the steps to successfully downgrade from the unofficial international B708 to B132 international :
1. Download and install via local update the B706 official unicom version ( totally necessary!!! )
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
2.Download and install vial local update the Unicom 2.0 Downgrade update.app :
https://mega.co.nz/#!ZYVixBqa!JNMLRB2DUVKlGpZVqPJbIsdbVPijks7r1Mtk46KGrmE
3.Download and install via local update the official B132 :
https://mega.co.nz/#!PdNWyY6I!NT5uVgLIglp_ga5R4BbWBTkT1I9vXjL9_5g7qyfw9_o
Then you can update via OTA to official B520 if you want.

ipred said:
Here are the steps to successfully downgrade from the unofficial international B708 to B132 international :
1. Download and install via local update the B706 official unicom version ( totally necessary!!! )
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
2.Download and install vial local update the Unicom 2.0 Downgrade update.app :
https://mega.co.nz/#!ZYVixBqa!JNMLRB2DUVKlGpZVqPJbIsdbVPijks7r1Mtk46KGrmE
3.Download and install via local update the official B132 :
https://mega.co.nz/#!PdNWyY6I!NT5uVgLIglp_ga5R4BbWBTkT1I9vXjL9_5g7qyfw9_o
Then you can update via OTA to official B520 if you want.
Click to expand...
Click to collapse
This is the only right method to downgrade from B708 to B520 !!!
I tried everything, ROMs, flashing boot.img, recovery.img... nothing, only this is right.
But remember, YUO MUST DO 1. STEP (DOWNLOAD AND INSTALL 706 )
BIGGGGG THANKSSSS !!!

Stuck on Huawei logo
Laske1982 said:
This is the only right method to downgrade from B708 to B520 !!!
I tried everything, ROMs, flashing boot.img, recovery.img... nothing, only this is right.
But remember, YUO MUST DO 1. STEP (DOWNLOAD AND INSTALL 706 )
BIGGGGG THANKSSSS !!!
Click to expand...
Click to collapse
I tried this and now it stuck on the Huawei logo at startup after B132 update!!! please help!!!

Jacquestheron101 said:
I tried this and now it stuck on the Huawei logo at startup after B132 update!!! please help!!!
Click to expand...
Click to collapse
With B132 in dload folder perform a Hard Format
Power Button + Volume up key + Volume down key.

Jacquestheron101 said:
I tried this and now it stuck on the Huawei logo at startup after B132 update!!! please help!!!
Click to expand...
Click to collapse
Hi Jacques
Did you come right with this?

actually this huawei updateextractor thing work with every firmware of p6 just check your current build number and paste in verlist file through notepad

does anyone knows why my phone wont boot with the huawei logo, instead i get the android one, i just downgrade to b706 from b708 and still get the same android logo