Related
hi guys
my p6 was in 4.4.2 & suddently i had no voice on my phone.caz of this i downgrade to 4.2 b130 but my phone got in black screen after showing huawei logo.now after tested some firmware like b132 b125 b117 b118 & some custom firmware i coudn't bring my phone up.but i understood whenever im using chinnies frimware like 117 & 118 my phone showing android logo and 1 time show android app to process but stuck on it for a long time & battery get hot and died after 30 min.
after 4 days and searching on the internet i coldnt solve this problem.i hope somebody here can help me with this big problem.
asphalt30000 said:
hi guys
my p6 was in 4.4.2 & suddently i had no voice on my phone.caz of this i downgrade to 4.2 b130 but my phone got in black screen after showing huawei logo.now after tested some firmware like b132 b125 b117 b118 & some custom firmware i coudn't bring my phone up.but i understood whenever im using chinnies frimware like 117 & 118 my phone showing android logo and 1 time show android app to process but stuck on it for a long time & battery get hot and died after 30 min.
after 4 days and searching on the internet i coldnt solve this problem.i hope somebody here can help me with this big problem.
Click to expand...
Click to collapse
Someone help me plZzzzzzzZz
asphalt30000 said:
Someone help me plZzzzzzzZz
Click to expand...
Click to collapse
Install B510
FutureIntelligence said:
Install B510
Click to expand...
Click to collapse
tnx for replying but for instaling b510 you have to install from b132. but it cant up in any rom?!!!
asphalt30000 said:
tnx for replying but for instaling b510 you have to install from b132. but it cant up in any rom?!!!
Click to expand...
Click to collapse
is there anybody can help me?
asphalt30000 said:
is there anybody can help me?
Click to expand...
Click to collapse
Before downgrading from KK to JB you have to install this:
http://dl.vmall.com/c01l4l4a2y#
Copy to external sd card to dload folder and use 3 button method to flash. After that you can try JB rom downgrade.
iwtfmcl said:
Before downgrading from KK to JB you have to install this:
http://dl.vmall.com/c01l4l4a2y#
Copy to external sd card to dload folder and use 3 button method to flash. After that you can try JB rom downgrade.
Click to expand...
Click to collapse
tnx my frnd but i already did this way.but it didnt work
I need someone to help . PlzZzZZZZ
asphalt30000 said:
I need someone to help . PlzZzZZZZ
Click to expand...
Click to collapse
Have you tried doing a factory reset?
Remove your SD card, then boot into recovery via the 3-button method.
Select "Data/factory reset", and "clear cache", then reboot system. You can then insert your SD card again.
Hopefully your phone will boot correctly.
I have sucsh problem too... But no sucsess till now
I did all above you said
miz_pimp said:
Have you tried doing a factory reset?
Remove your SD card, then boot into recovery via the 3-button method.
Select "Data/factory reset", and "clear cache", then reboot system. You can then insert your SD card again.
Hopefully your phone will boot correctly.
Click to expand...
Click to collapse
Ya bro i did it. thousand time
asphalt30000 said:
Ya bro i did it. thousand time
Click to expand...
Click to collapse
Then flash the device again using the 3-button method immediately after?
miz_pimp said:
Then flash the device again using the 3-button method immediately after?
Click to expand...
Click to collapse
I know what u mean bro but whenever i want to flash any roms i did it this way
asphalt30000 said:
I know what u mean bro but whenever i want to flash any roms i did it this way
Click to expand...
Click to collapse
Ok, then. Just to make sure, you do have the international version of the p6, right? P6-U06?
I just can't understand how nothing is working for you, although we already know that your system IS able to boot with the Chinese firmware, just not completely.
miz_pimp said:
Ok, then. Just to make sure, you do have the international version of the p6, right? P6-U06?
I just can't understand how nothing is working for you, although we already know that your system IS able to boot with the Chinese firmware, just not completely.
Click to expand...
Click to collapse
Tnx alot bro for replying. Ya i downloaded international rom for p6 u06. All of them was for u06 . As i said b125 b132 b130 b117 b118 & ...
asphalt30000 said:
Tnx alot bro for replying. Ya i downloaded international rom for p6 u06. All of them was for u06 . As i said b125 b132 b130 b117 b118 & ...
Click to expand...
Click to collapse
Yes, but what I was asking is if the device you have is the P6-U06.
Anyway, I'm afraid I don't know how else to help you, except to suggest taking it to a service centre.
Or as a last resort, try installing TWRP. There is a guide in the TWRP thread.
PS. I'm a girl. [emoji4]
miz_pimp said:
Yes, but what I was asking is if the device you have is the P6-U06.
Anyway, I'm afraid I don't know how else to help you, except to suggest taking it to a service centre.
Or as a last resort, try installing TWRP. There is a guide in the TWRP thread.
PS. I'm a girl. [emoji4]
Click to expand...
Click to collapse
Oh sryyyy???my sis
Yeah no one can help me??. I have been searching all of the internet but nothing helps me
I instaled twrp & 3 custom rom but they are like chinnies rom unfortunately.
Again tnx my siiiis
Hi, I had a similar problem last week and here is how I finally could bring my P6 back to life:
1) Install TWRP and wipe system, data and cache
2) Install CM11 ROM and boot with it
3) Put back the B510 stock recovery
4) Install B116 stock rom by putting its Update.app in the dload folder - reboot with the three buttons and it went in recovery and I selected install from external sdcard
5) Boot with this rom, then upgrade to any verstion you like.
I hope this procedure will work for you too.
Martin
sko4a said:
Hi, I had a similar problem last week and here is how I finally could bring my P6 back to life:
1) Install TWRP and wipe system, data and cache
2) Install CM11 ROM and boot with it
3) Put back the B510 stock recovery
4) Install B116 stock rom by putting its Update.app in the dload folder - reboot with the three buttons and it went in recovery and I selected install from external sdcard
5) Boot with this rom, then upgrade to any verstion you like.
I hope this procedure will work for you too.
Martin
Click to expand...
Click to collapse
Tnx alot my frnd . I will do this and i will say the result. I hope sooooo
no its not working for me . still stucking in android logo :crying::crying::crying::crying::crying:
Hello,
I've bot a error when i trie to update my phone to any kk version with the local update methode or three buttons method :
I've tried B132, B512, B634 and the update to downgrade to JB but always the same error, flashing via adb Twrp for KK then reflask stock_B118 recovery but no change
there are no problems flashing a custom rom with twrp (actually i use B513repack, and before i used B510 custom rom).
Don't find a solution for this problem .....
Need help, i want to try the B634....
bab1c said:
Hello,
I've bot a error when i trie to update my phone to any kk version with the local update methode or three buttons method :
I've tried B132, B512, B634 and the update to downgrade to JB but always the same error, flashing via adb Twrp for KK then reflask stock_B118 recovery but no change
there are no problems flashing a custom rom with twrp (actually i use B513repack, and before i used B510 custom rom).
Don't find a solution for this problem .....
Need help, i want to try the B634....
Click to expand...
Click to collapse
Hi
Try to flash your B510 custom and flash with adb the B510 stock recovery in the second post here > http://forum.xda-developers.com/showthread.php?t=2709353 .
flashing via adb Twrp for KK then reflask stock_B118 recovery but no change
Click to expand...
Click to collapse
Because if you flash TWRP (for KK) then a stock recovery B118 (for JB) it's normal it's don't work. And if I don't say something wrong B118 is a chinese version.
Good luck
Ok i'll try this now....
Edit :
Flash recovery.img via fastboot ..... same result trying update B634 ????
bab1c said:
Ok i'll try this now....
Edit :
Flash recovery.img via fastboot ..... same result trying update B634 ????
Click to expand...
Click to collapse
I Don't know anything about this version you can try ..
Skyllery said:
I Don't know anything about this version you can try ..
Click to expand...
Click to collapse
here : http://forum.xda-developers.com/ascend-p6/general/b634-kitkat-t2861981
bab1c said:
here : http://forum.xda-developers.com/ascend-p6/general/b634-kitkat-t2861981
Click to expand...
Click to collapse
Yeah I have read but i didn't test it. It's quiet strange the two Update.app and the new numeration.
Skyllery said:
Yeah I have read but i didn't test it. It's quiet strange the two Update.app and the new numeration.
Click to expand...
Click to collapse
i've allready seen another update with 2 UPDATE files, doesn't remenber version....
I'm having exactly the same problem cant update to any version. Always says ' Check Module Verlist FAIL'
SOLVED
I found a solution to that problem.
Just use another kitkat recovery image to update. In my case,
https://www.androidfilehost.com/?fid=23329332407568599
did the trick.
benshannon said:
I found a solution to that problem.
Just use another kitkat recovery image to update. In my case,
https://www.androidfilehost.com/?fid=23329332407568599
did the trick.
Click to expand...
Click to collapse
It worked, the system is flashing.
I think i forgot to flash B510 boot.img .....
Thanks
Since everybody knows how to upgrade OTA or from LOCAL UPGRADE and go from 4.2 to 4.4 I've decided to let you know how to easily downgrade from 4.4 to 4.2 AND / OR change from Chinese to International Huawei Firmware!
The method I describe here, I've found in some German forums after long search. It really works! 100% tested on my device Ascend P6-U06!
!!! CAUTION !!!
Before you begin, you must be sure you have STOCK recovery, NOT TWRP one!!! This flashable files work and can be flashed only thru STOCK recovery!
If you have TWRP recovery and don't know how to go back to STOCK one, look the SECOND POST in THIS thread and follow the steps there, before you begin this procedure! ONLY after you're done with turning back your STOCK recovery and you're sure of that, you can continue with the following steps:
To Downgrade from Android 4.4 to Android 4.2 / Switch from Chinese to International ROM, do the following:
1. Download this (Unicom 2.0 Downgrade Flashable ZIP) and flash it thru STOCK RECOVERY - https://mega.co.nz/#!ZYVixBqa!JNMLRB2DUVKlGpZVqPJbIsdbVPijks7r1Mtk46KGrmE
This is a 240MB archive, also known as Unicom 2.0 - something like ROM, but it is not an entire ROM, but just part of it, that must be flashed thru stock recovery. You must unzip it, take the dload folder that is inside and put it on you sdcard. Than you can flash it like a local update thru the updater, or you can forcefully flash it - pres power+ volume down+ volume up and it will take you directly to flashing updates thru stock recovery. When you flashed it, you can once again boot normally into you Android device. Now you must take dload folder from the B132 zip (from the link below), once again put it on your sdcard and flash it again using the same methods again thru stock recovery. The cool thing is that the first little flashable zip allows you not just to downgrade from 4.4 to 4.2, but also change from China to International ROMs. So when you're finished flashing this thru stock recovery, flash the official international B125 or B132, wait for the system to install and boot into android. When it is finally booted, you can flash B510 or B512/513 - whatever you want. In my case when I downgraded to B132, after the first boot the system prompted me, that it can be updated directly to B520 OTA. I've updated and now I am once again with International firmware​
2. Download this (B132 International 4.2 Firmware) and flash it thru STOCK RECOVERY ONLY if you already flashed the file in the step above! - https://mega.co.nz/#!5JkAzKpB!nFqfHIHfWo6EO4XPqjO3Gga6a3XWWnqqZxZDZpzAdWE
3. Boot into Official Huawei Android 4.2 firmware and check for update OTA. If you have one - install it. If you don't - you can flash B510 or B512/513/etc...
Enjoy International firmware line again! This method can also be used just to downgrade form Android 4.4 to Android 4.2!
Files are not flashable thru TWRP - please, use ONLY Stock Recovery!
------------------------------------------------------------------------------------------
Please, hit THANKS, if this thread helped you!
question: which stock recovery should i take if i have b635 (there is no available official b635 rom - only repack)..
i want to downgrade because i want to get the b520 fw..
maybe you have an advice..
thanks in advance..
blueIBI said:
question: which stock recovery should i take if i have b635 (there is no available official b635 rom - only repack)..
i want to downgrade because i want to get the b520 fw..
maybe you have an advice..
thanks in advance..
Click to expand...
Click to collapse
Just try with the stock B510 recovery from the second post in the TWRP recovery theme! I think stock recovery is the same for all 4.4 ROMs and it doesn't matter which one. I recommend the one that I told you about! Should work! I was with Chinese B706 ROM and TWRP. To downgrade I've flashed the B510 stock recovery first and then - step by step as I wrote above.
thanks..will try to do that..
blueIBI said:
thanks..will try to do that..
Click to expand...
Click to collapse
I have a question for you - I see that you modified the .prop file for the local channel, to get louder sound in headphones (from your signature). I've tried to do this today, but when I try to modify the file every time it says - cannot save changes, file cannot be modified, changes not saved! I have root and I've mounted / and /system as writable! I can edit build.pro without any problem and save the changes, but this file - I can't! How did you edited it and how can I edit it too?
Thank you!
UP!
Moderators, please consider to make this thread sticky / important! Thank you!
did not work for me..
i made the following:
flashed stock recovery from b510
took a fresh 4gb sdcard with dload folder on it..inside this folder was the update.app from the unicom rom..
then turned off device..
then pressed power,vol + & - together and held it 'til the recovery screen with yellow writing appeared..
it started to flash..but on the point where the verlist check begins it tells me "fail"!!!..
so what to do now???
i know this procedure..did it with the b506 rom and it worked..but with the b635 rom it won't work..
blueIBI said:
did not work for me..
i made the following:
flashed stock recovery from b510
took a fresh 4gb sdcard with dload folder on it..inside this folder was the update.app from the unicom rom..
then turned off device..
then pressed power,vol + & - together and held it 'til the recovery screen with yellow writing appeared..
it started to flash..but on the point where the verlist check begins it tells me "fail"!!!..
so what to do now???
i know this procedure..did it with the b506 rom and it worked..but with the b635 rom it won't work..
Click to expand...
Click to collapse
Try to flash B706 Chinese EMUI 3.0 new Development edition ROM from the official Huawei web site. If you flash it over the B635 successfully, then you must be able to do this procedure to turn back into international line of ROMs and to B132 4.2 ROM. after that you can flash B510 again. Try this method! I'm pretty sure that it will be possible to flash B706 directly over B635, even than that in the official website it is recommended to update only from B508SP02 official chinese rom. I had success with updating directly to B706 from B512, but if you can't go from B635, try to flash B508SP02 first, than B706 and than downgrade! Should work! Good Luck!
got it..
i just had to flash the b125!!!
so easy..i just flashed the stock recovery of b510..made a force update with the b125 (not the p6 unicom 2.0!!!!)..and now i just upgrade my p6 to b520 via OTA!!!
thanks for your help and time!
blueIBI said:
got it..
i just had to flash the b125!!!
so easy..i just flashed the stock recovery of b510..made a force update with the b125 (not the p6 unicom 2.0!!!!)..and now i just upgrade my p6 to b520 via OTA!!!
thanks for your help and time!
Click to expand...
Click to collapse
You're welcome!
ThunderBird891 said:
Try to flash B706 Chinese EMUI 3.0 new Development edition ROM from the official Huawei web site. If you flash it over the B635 successfully, then you must be able to do this procedure to turn back into international line of ROMs and to B132 4.2 ROM. after that you can flash B510 again. Try this method! I'm pretty sure that it will be possible to flash B706 directly over B635, even than that in the official website it is recommended to update only from B508SP02 official chinese rom. I had success with updating directly to B706 from B512, but if you can't go from B635, try to flash B508SP02 first, than B706 and than downgrade! Should work! Good Luck!
Click to expand...
Click to collapse
You installed the b706 on b512 ??
Why did they say that to upgrade only on b508
After installing are you facing any problems
Plz reply
Sent from my HUAWEI P6-U06
macklon said:
You installed the b706 on b512 ??
Why did they say that to upgrade only on b508
After installing are you facing any problems
Plz reply
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
No. No problems at all. I think just the upgrade took a little while that usual but it flashed like charm over the B512 without any problems! I think the flashing from B508 is just a recommendation, because the B508SP02 is the latest chinese ROM, and this B706 is Chinese developers edition...
ThunderBird891 said:
No. No problems at all. I think just the upgrade took a little while that usual but it flashed like charm over the B512 without any problems! I think the flashing from B508 is just a recommendation, because the B508SP02 is the latest chinese ROM, and this B706 is Chinese developers edition...
Click to expand...
Click to collapse
So from b512 to b706 with dload and update
Sent from my HUAWEI P6-U06
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
Which Rom are you using pltl
Sent from my HUAWEI P6-U06
macklon said:
So from b512 to b706 with dload and update
Sent from my HUAWEI P6-U06
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
Which Rom are you using pltl
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
That's right! Download the official B706 from Huawei EMUI website, unzip it, put the dload folder in you sdcard and then i recomend to make Local update first. If it doesn't want to update thru local update option in the Update Application, then try with forceful update - press and hold power + volume up + volume down and wait until phone boots into stock recovery mode! The update can only be done with stock recovery! If you're on TWRP, that you must go back to stock!
**** uc browser sucks
I kept to download b508 due to some problem I have to pause it only 36mb was remaining and when I resumed it showed a error was not able to resume the download so I re downloaded the b508 it got downloaded now
So kept to download b706 the same thing happened only 50mb was remaining for the download to complete it showed a error again but this time I did even pause ****
And now someone told me we can update b706 on b512 no need of b508 ****
Today ill download b706 on chrome
Sent from my HUAWEI P6-U06
Hi,in my Huawei Ascend P6-U06 i installed firmware B513+EMUI 2.3.
I tried to downgrade with this method but it fails when i flash Unicom 2.0 (i follow the instructions:download it..unzip then put UPDATE.app in dload folder of my sdcard).When i flash it,itfails(i have Stock Recovery,never installed TWRP).
Is this method valid also for B513+EMUI2.3?Or maybe i've done something wrong?
Any help is very appreciate..Thanks
gabrymed said:
Hi,in my Huawei Ascend P6-U06 i installed firmware B513+EMUI 2.3.
I tried to downgrade with this method but it fails when i flash Unicom 2.0 (i follow the instructions:download it..unzip then put UPDATE.app in dload folder of my sdcard).When i flash it,itfails(i have Stock Recovery,never installed TWRP).
Is this method valid also for B513+EMUI2.3?Or maybe i've done something wrong?
Any help is very appreciate..Thanks
Click to expand...
Click to collapse
Try to flash it forceful with holding all buttons together, or try to copy not only the update.app, but the whole dload folder from the archive. If it's not working, just try to flash B510 or B512 on top of B513 - this should work. After that you can try to downgrade to 4.2 again with the same method!
ThunderBird891 said:
Try to flash it forceful with holding all buttons together, or try to copy not only the update.app, but the whole dload folder from the archive. If it's not working, just try to flash B510 or B512 on top of B513 - this should work. After that you can try to downgrade to 4.2 again with the same method!
Click to expand...
Click to collapse
Thanks for your help!
Cause i'm a newbie,i explain you step by step what i've done:
I follow carefully your instructions(part 1),i try to flash it with local update,but i get message "fail"
After that,in stock recovery,i didn't reboot,but i move to option "apply update from external storage" and after a few seconds i have messages:
-wiping cache (at package request)...
-formatting cache
-cache wipe complete
-install from sd card complete
-cust copying files
-copy cust files successed!
It means that the process has been successful ??? If yes then i proceed to downgrade...
If no,i'll try with your advice to flash B510 or B512 on top of B513...
gabrymed said:
Thanks for your help!
Cause i'm a newbie,i explain you step by step what i've done:
I follow carefully your instructions(part 1),i try to flash it with local update,but i get message "fail"
After that,in stock recovery,i didn't reboot,but i move to option "apply update from external storage" and after a few seconds i have messages:
-wiping cache (at package request)...
-formatting cache
-cache wipe complete
-install from sd card complete
-cust copying files
-copy cust files successed!
It means that the process has been successful ??? If yes then i proceed to downgrade...
If no,i'll try with your advice to flash B510 or B512 on top of B513...
Click to expand...
Click to collapse
The process is successful! You must now reboot an go in your android. Now you can copy the other firmware (b510) to your dload folder in sdcard and then try to downgrade! It should work fine!!!
ThunderBird891 said:
The process is successful! You must now reboot an go in your android. Now you can copy the other firmware (b510) to your dload folder in sdcard and then try to downgrade! It should work fine!!!
Click to expand...
Click to collapse
Ok,downgraded with success! Now i receive an OTA upgrade to western europe B520 but i think i'll wait for the moment...
Thanks ThunderBird for your help,very appreciate!
Hello,
I upgrade form b118 to b707 and next to b708 my huawei p6, and I don't see I need b508 to go b707. My mistake.
Now my GPS don't work, I think it don't work earlier, but I don't sure.
I want back to b132 and lock bootloader, but I can not downgrade from b708.
I think I tried everythink.
First I try instaled UPDATE.APP which can downgrade from KK to JB, but I have vendorlist fail.
I wiped everyting, instaled recovery and boot.img from b508 and again try instal this downgrade UPDATE but still is vendor list fail.
I instaled custom ROM based on b508 and tried downgrade but again this fail:silly:. Please help, I haven't idea what doing now.
Sorry for my english, I am working at it.
Downgrade
aknorts said:
Hello,
I upgrade form b118 to b707 and next to b708 my huawei p6, and I don't see I need b508 to go b707. My mistake.
Now my GPS don't work, I think it don't work earlier, but I don't sure.
I want back to b132 and lock bootloader, but I can not downgrade from b708.
I think I tried everythink.
First I try instaled UPDATE.APP which can downgrade from KK to JB, but I have vendorlist fail.
I wiped everyting, instaled recovery and boot.img from b508 and again try instal this downgrade UPDATE but still is vendor list fail.
I instaled custom ROM based on b508 and tried downgrade but again this fail:silly:. Please help, I haven't idea what doing now.
Sorry for my english, I am working at it.
Click to expand...
Click to collapse
Hello. try this.
Extract UPDATE.APP of B132 with huawei updateextractor,edit verlist.txt with notepad and add P6-U06V100R001C17B708 to
file and save it.now repack with huawei updateextractor choose folder that you extract UPDATE.APP in previous step.
copy new UPDATE.APP in dload folder of sdcard and update again with dload metod.
this is just an idea and im not sure if it workks.try and seee if it works.
Ok, I did it, and verlist is ok, but stop at CUST. :/ Any idea what do now?
probably same problem here
http://forum.xda-developers.com/ascend-p6/help/b708-root-flash-twrp-downgrade-t2991236
---------- Post added at 08:46 PM ---------- Previous post was at 08:11 PM ----------
try it!
i will test it too
http://forum.xda-developers.com/ascend-p6/general/how-to-downgrade-4-4-4-2-change-chinese-t2951566
give me feedback
I tried it before, I didn't work for me.
aknorts said:
Ok, I did it, and verlist is ok, but stop at CUST. :/ Any idea what do now?
Click to expand...
Click to collapse
Flash cust,img of B132 in fastboot mode ( fastboot flash cust 12.cust.img) then flash UPDATE.APP.if you get error again,
repack without cust.img and flash generated UPDATE.APP,hope this work.
Thanks, I add b708 to verlist and change cust from 708, repack it and instal. It instaled but dont work..... but I instal clear b118 and everything fine. GPS work too. Thanks for help.
HELP !!!
aknorts said:
Thanks, I add b708 to verlist and change cust from 708, repack it and instal. It instaled but dont work..... but I instal clear b118 and everything fine. GPS work too. Thanks for help.
Click to expand...
Click to collapse
HI,
I am new here and sorry for my bad english.
I update my P6 on b708 and emui 3,0 is great but problem is that font is to small.
I can change font size but not size of menu letters.
i read everything on this forums but still i dont now how to downgrade B708 firm.
Please somebody help do downgrade my P6 from B708 to B512, B520 !!!
Laske1982 said:
HI,
I am new here and sorry for my bad english.
I update my P6 on b708 and emui 3,0 is great but problem is that font is to small.
I can change font size but not size of menu letters.
i read everything on this forums but still i dont now how to downgrade B708 firm.
Please somebody help do downgrade my P6 from B708 to B512, B520 !!!
Click to expand...
Click to collapse
i have downgrade from 708 to B132 as you said the font size is too small and I found the older version is better than the new ones. You have to flash recovery.img and boot.img throught adb procedure which you will find the details in this forum. After that you put the requested image on sd card and flash it
dream_fun said:
i have downgrade from 708 to B132 as you said the font size is too small and I found the older version is better than the new ones. You have to flash recovery.img and boot.img throught adb procedure which you will find the details in this forum. After that you put the requested image on sd card and flash it
Click to expand...
Click to collapse
Can you post the link of that procedure ?
Here are the steps to successfully downgrade from the unofficial international B708 to B132 international :
1. Download and install via local update the B706 official unicom version ( totally necessary!!! )
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
2.Download and install vial local update the Unicom 2.0 Downgrade update.app :
https://mega.co.nz/#!ZYVixBqa!JNMLRB2DUVKlGpZVqPJbIsdbVPijks7r1Mtk46KGrmE
3.Download and install via local update the official B132 :
https://mega.co.nz/#!PdNWyY6I!NT5uVgLIglp_ga5R4BbWBTkT1I9vXjL9_5g7qyfw9_o
Then you can update via OTA to official B520 if you want.
ipred said:
Here are the steps to successfully downgrade from the unofficial international B708 to B132 international :
1. Download and install via local update the B706 official unicom version ( totally necessary!!! )
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
2.Download and install vial local update the Unicom 2.0 Downgrade update.app :
https://mega.co.nz/#!ZYVixBqa!JNMLRB2DUVKlGpZVqPJbIsdbVPijks7r1Mtk46KGrmE
3.Download and install via local update the official B132 :
https://mega.co.nz/#!PdNWyY6I!NT5uVgLIglp_ga5R4BbWBTkT1I9vXjL9_5g7qyfw9_o
Then you can update via OTA to official B520 if you want.
Click to expand...
Click to collapse
This is the only right method to downgrade from B708 to B520 !!!
I tried everything, ROMs, flashing boot.img, recovery.img... nothing, only this is right.
But remember, YUO MUST DO 1. STEP (DOWNLOAD AND INSTALL 706 )
BIGGGGG THANKSSSS !!!
Stuck on Huawei logo
Laske1982 said:
This is the only right method to downgrade from B708 to B520 !!!
I tried everything, ROMs, flashing boot.img, recovery.img... nothing, only this is right.
But remember, YUO MUST DO 1. STEP (DOWNLOAD AND INSTALL 706 )
BIGGGGG THANKSSSS !!!
Click to expand...
Click to collapse
I tried this and now it stuck on the Huawei logo at startup after B132 update!!! please help!!!
Jacquestheron101 said:
I tried this and now it stuck on the Huawei logo at startup after B132 update!!! please help!!!
Click to expand...
Click to collapse
With B132 in dload folder perform a Hard Format
Power Button + Volume up key + Volume down key.
Jacquestheron101 said:
I tried this and now it stuck on the Huawei logo at startup after B132 update!!! please help!!!
Click to expand...
Click to collapse
Hi Jacques
Did you come right with this?
actually this huawei updateextractor thing work with every firmware of p6 just check your current build number and paste in verlist file through notepad
does anyone knows why my phone wont boot with the huawei logo, instead i get the android one, i just downgrade to b706 from b708 and still get the same android logo
My phone says I have a new update which is the 742MB B140 update that has been out for a while now. But I can't install it for some reason. I tried flashing the three zip files via TWRP and then I tried it with the stock recovery extracted from the UPDATE.APP from the B140 firmware update. Everytime it fails and says "Failed to check update files". In TWRP it gives different reasons depending on the zip I flash first. Is this because I unlocked my bootloader? I am new to Huawei or Honor and things are a bit more complicated with this one than I'm used to.
i am Kal-El said:
My phone says I have a new update which is the 742MB B140 update that has been out for a while now. But I can't install it for some reason. I tried flashing the three zip files via TWRP and then I tried it with the stock recovery extracted from the UPDATE.APP from the B140 firmware update. Everytime it fails and says "Failed to check update files". In TWRP it gives different reasons depending on the zip I flash first. Is this because I unlocked my bootloader? I am new to Huawei or Honor and things are a bit more complicated with this one than I'm used to.
Click to expand...
Click to collapse
Never flash ota updates with twrp .
For now , iam sure the update process is messed or atleast few files in system should corrupt due to incomplete flases. Better u try to return to full stock
gopinaidu77 said:
Never flash ota updates with twrp .
For now , iam sure the update process is messed or atleast few files in system should corrupt due to incomplete flases. Better u try to return to full stock
Click to expand...
Click to collapse
Do you know where I can get the full stock B130 for the Indian version? I tried googling and I tried Firmware finder too but I can't find DUK-L09C675B130 which is the current firmware version on my device. Thanks btw.
i am Kal-El said:
Do you know where I can get the full stock B130 for the Indian version? I tried googling and I tried Firmware finder too but I can't find DUK-L09C675B130 which is the current firmware version on my device. Thanks btw.
Click to expand...
Click to collapse
I will check and let you know
i am Kal-El said:
Do you know where I can get the full stock B130 for the Indian version? I tried googling and I tried Firmware finder too but I can't find DUK-L09C675B130 which is the current firmware version on my device. Thanks btw.
Click to expand...
Click to collapse
There is only b140 firmware available , let give a try dobload that from firmware finder and extract the zip there is update.app open it with huawei update extractor anf find the recovery.img and flash it . Anf try to update now.
venugopalu007 said:
There is only b140 firmware available , let give a try dobload that from firmware finder and extract the zip there is update.app open it with huawei update extractor anf find the recovery.img and flash it . Anf try to update now.
Click to expand...
Click to collapse
Already did that as I've mentioned.
i am Kal-El said:
Already did that as I've mentioned.
Click to expand...
Click to collapse
Ho , i didn't seen it .ok
i am Kal-El said:
Already did that as I've mentioned.
Click to expand...
Click to collapse
If you want B130 I think it's better to contact honor, they may give you a direct link to it (just mention you want FULL-OTA)
Yes better to contact them , they wont give you link but they will ask your imei and they push your update.