Related
guys please help me.. i think i have bricked my xperia ion.. well this is what i did..
first i installed the rooted jellybean rom from sir spectre's rooted/deodexed stock rom. then after that. i succefully installed the rom but when i reboot the system it starts the bootloop. then i follow his instruction of holding the power + volume up button to have the turned of state. but this what happened instead of getting a 3 simutanous vibration i have got 1 single vibrate and then the 3 simultanous vibrate came then my phone died. now what did happen to my phone? can i revived it i connected it to the pc as the guide said that the flash tool would recognize it but nothing really happens it has been 2 hours now since i connected it to the pc and i still did not remove it..
what happened? please tell me and help me please,..,
Before you connect the phone to the pc hold/press volume down button to flash again the ROM.
AlinTheron said:
Before you connect the phone to the pc hold/press volume down button to flash again the ROM.
Click to expand...
Click to collapse
yes sir i did that but no green noticfication light and not even a charging state.. what did happen? i followed the steps but it seems it made me lost.
Can you flash a kernel for booting,or your pc does not see the phone at all?.
AlinTheron said:
Can you flash a kernel for booting,or your pc does not see the phone at all?.
Click to expand...
Click to collapse
my pc wont recognize the phone.. i think i need to charge it for far longer time to have it the first cycle as the guide for recovering a bricked xperia device.. thanks for your reply sir..
2 hours is enough. At some point it will try to boot. Then put it in flashmode and flash with Flashtool the ROM. Do not try to power it on. Wait,it will try to boot by himself.
Don't charge him from pc. Use wall socket.
---------- Post added at 10:30 PM ---------- Previous post was at 10:24 PM ----------
Or read this. Read it all.
http://forum.xda-developers.com/showthread.php?t=2344896
gave012 said:
guys please help me.. i think i have bricked my xperia ion.. well this is what i did..
first i installed the rooted jellybean rom from sir spectre's rooted/deodexed stock rom. then after that. i succefully installed the rom but when i reboot the system it starts the bootloop. then i follow his instruction of holding the power + volume up button to have the turned of state. but this what happened instead of getting a 3 simutanous vibration i have got 1 single vibrate and then the 3 simultanous vibrate came then my phone died. now what did happen to my phone? can i revived it i connected it to the pc as the guide said that the flash tool would recognize it but nothing really happens it has been 2 hours now since i connected it to the pc and i still did not remove it..
what happened? please tell me and help me please,..,
Click to expand...
Click to collapse
Yeah it happen with me also..please go to this link below for solution
http://forum.xda-developers.com/showthread.php?p=43281822
Sent from my LT28h using xda premium
I have rooted my xperia t2 ultra dual with kingroot ,and tried to replace with super su binaries, and rebooted my mobile,it boots successfully and then screen is blank,cannot see anything, but by pressing power power button it appears power off,restart ,screenshot ....how should I solve this plz help anyone it's urgent...
Thanks in advance
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Edwin Hamal said:
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Click to expand...
Click to collapse
Wants to revert to stock rom
Edwin Hamal said:
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Click to expand...
Click to collapse
Wants to revert to stock rom
Plz help
Just download this file: https://mega.nz/#!PBEWiTYT!s9IaGIBLziIhgwJzqkmrFa5fFYE95RsGh4rxKa7cCwE
and flash it via twrp recovery.
Edwin Hamal said:
Just download this file: https://mega.nz/#!PBEWiTYT!s9IaGIBLziIhgwJzqkmrFa5fFYE95RsGh4rxKa7cCwE
and flash it via twrp recovery.
Click to expand...
Click to collapse
Thanks ,a lot but how to install twrp when iam stucked in a bootloop
agriculture said:
Thanks ,a lot but how to install twrp when iam stucked in a bootloop
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2764408 This will help you and also have you installed adb and fastboot in your pc? If not first install it.
Also don't forget to install the drivers as well.
T2 ultra dual cant turn on and cant charge
T2 ultra dual tried to charge it in a wall charger and tried it in usb connected to desktop charge but it only shows me a blinking red notification light.
i tried to turn it on but it wont. i tried to hard reset it with power button + volume up but nothing happen
Happened the same with me
So here's what I did
Use a branded data cable
And a 2amps output charger
Connect both
And connect it to your t2
Turn on the power of charger
As soon you see sony logo turn on the t2 normally
If it doesn't show sony logo,then disconnect everything and reconnect and repeat the procedure until it shows the sony logo
And don't let the battery go below 5 percent
Keep it to charge if battery is below 5 or 3
So yo won't have to do the 3 minutes procedure once again
And yeah..use a stable base..don't let the charging pin or mobile move during this process
For the question asked by narendra17
or just get ur charging slot replaced
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
baonxxx said:
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
I have exactly the same problem, but i had the stock ROM installed before flashing by twrp..
Still don't know how to fix it.
Fede2797 said:
I have exactly the same problem, but i had the stock ROM installed before flashing by twrp..
Still don't know how to fix it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/zen...offical-mm-t3452203/post68476763#post68476763
ill give it a try.... using xfstk , will report soon
baonxxx said:
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
Fede2797 said:
I have exactly the same problem, but i had the stock ROM installed before flashing by twrp..
Still don't know how to fix it.
Click to expand...
Click to collapse
Follow the steps what sukhwant717 helped me with. The flash tool was failing after I did the xFSTK downloader. I used .194 and followed his steps and finally got back in my phone after messing with it all day yesterday with a hard brick.
http://forum.xda-developers.com/zen...-remote-flashcmds-t3452495/page2#post68477517
quarterbreed said:
Follow the steps what sukhwant717 helped me with. The flash tool was failing after I did the xFSTK downloader. I used .194 and followed his steps and finally got back in my phone after messing with it all day yesterday with a hard brick.
http://forum.xda-developers.com/zen...-remote-flashcmds-t3452495/page2#post68477517
Click to expand...
Click to collapse
The thing is i can't do anything.. The phone won't turn on nor charge, i'm trying to do that xFSTK thing
quarterbreed said:
Follow the steps what sukhwant717 helped me with. The flash tool was failing after I did the xFSTK downloader. I used .194 and followed his steps and finally got back in my phone after messing with it all day yesterday with a hard brick.
http://forum.xda-developers.com/zen...-remote-flashcmds-t3452495/page2#post68477517
Click to expand...
Click to collapse
im stuck in xfstk downloader , my device detected under intelsoc as moorfield , but after press downloading ifwi my phone reboot and not detected by my pc , i should press the power and vol down to make my pc detect my phone , but xfstk have only 20 attemped try that make it failure.
check my log here http://pastebin.com/GTrjP0Jj
=============================================================
don't have idea why , i just depressed press the download button , and it say os download compleate , my phone boot up now.thanks for everyone who help , god bless you
baonxxx said:
im stuck in xfstk downloader , my device detected under intelsoc as moorfield , but after press downloading ifwi my phone reboot and not detected by my pc , i should press the power and vol down to make my pc detect my phone , but xfstk have only 20 attemped try that make it failure.
check my log here http://pastebin.com/GTrjP0Jj
=============================================================
don't have idea why , i just depressed press the download button , and it say os download compleate , my phone boot up now.thanks for everyone who help , god bless you
Click to expand...
Click to collapse
Can you tell me how did you do to make intelsoc detect your device? i just can't, in the device manager it never appears as moorefield
baonxxx said:
im stuck in xfstk downloader , my device detected under intelsoc as moorfield , but after press downloading ifwi my phone reboot and not detected by my pc , i should press the power and vol down to make my pc detect my phone , but xfstk have only 20 attemped try that make it failure.
check my log here http://pastebin.com/GTrjP0Jj
=============================================================
don't have idea why , i just depressed press the download button , and it say os download compleate , my phone boot up now.thanks for everyone who help , god bless you
Click to expand...
Click to collapse
This could be the reason:
Code:
gpflags -- 0x800000807
I think it needs to have four zeroes instead of five:
Code:
0x80000807
Give it a try, good luck. I haven't had the luck to get the device detected.
Fede2797 said:
Can you tell me how did you do to make intelsoc detect your device? i just can't, in the device manager it never appears as moorefield
Click to expand...
Click to collapse
what windows did you use ? im using windows 10.
https://www.youtube.com/watch?v=ft4ZgZpnyQc < watch this , if you failed install from inf file thats mean its already installed , just install isoc driver.
https://www.youtube.com/watch?v=71YAIw7_-kg < this one how to boot from advance startup.
quarterbreed said:
Follow the steps what sukhwant717 helped me with. The flash tool was failing after I did the xFSTK downloader. I used .194 and followed his steps and finally got back in my phone after messing with it all day yesterday with a hard brick.
http://forum.xda-developers.com/zen...-remote-flashcmds-t3452495/page2#post68477517
Click to expand...
Click to collapse
thanks for the info sir , i try this one too and now my phone bootup . cheers
I flashed MIUI 8 rom today as a secondary rom on multi rom and now my device doesnt boot and the screen doesnt turn on even when i connect it to a charger and also the device is not detected by my computer .. what should i do ?
Any sign of life when vol + & power pressed together?
Mega unbrick guide. You can find it in the same thread
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
passion8059 said:
Any sign of life when vol + & power pressed together?
Click to expand...
Click to collapse
No sign of life ... its totally dead .. the screen doesnt even turn on even when i press vol + and power .. nor it turn on when i connect it to the charger
Have you tried the unbrick guide?
Sent from my OnePlus 3 using Tapatalk
Omair555 said:
I flashed MIUI 8 rom today as a secondary rom on multi rom and now my device doesnt boot and the screen doesnt turn on even when i connect it to a charger and also the device is not detected by my computer .. what should i do ?
Click to expand...
Click to collapse
Completely power of the device by pressing the power button for 40 seconds. Then press volume up for ten seconds and while pressing connect to the computer. If the device is detected by the computer then try the first method of mega unbrick guide. Best of luck.
Thanks my device is back to life
Mega unbrick miracle
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Reading this post was more oppressive than a Alfred Hitchcock movie's...
Omair555 said:
Thanks my device is back to life
Click to expand...
Click to collapse
What did you do to have it turn on again?
bltclem said:
What did you do to have it turn on again?
Click to expand...
Click to collapse
Used the mega unbrick guide
OnePlus never dies! He kills flagships.
Its fully unbrickable, screwed phone up lots off times experimenting with things and have always got phone back again.
Same! i got mine yesterday off swappa, original owner fked it all up by unrooting, flashing stock recovery and rom, and never took off the pin to decrypt the storage on twrp so i screwed the storage with resetting the userdata.img and it only showed 16gb out of 64 so i used the mega unbrick guide and now im back in buisness
Sent from my aicp_oneplus3 using Tapatalk
Well, i'm kinda scared because i already installed a lot of custom rom's and everything works fine every time. Yesterday i installed the MIUI 12 Beta chinese version and after i saw that have one global beta version so i download the global one, installed the pre loader to prevent the bricked device and installed the twrp recovery to install the global rom. I wiped everything as always, installed the rom and reboot the phone... Now he doesnt show nothing, just died, he doesn't stuck at boot loader, if i connect him to the power the charging led turns on, he vibrate if i click at the power button but no image at all, nothing...
I tryed to connect to pc and turn it on at fastboot thinking that the ldc pannel was burned but no, the pc iddentifies a divice and 1 sec after he just unplug itself...
Can someone help me?
jhrolife said:
Well, i'm kinda scared because i already installed a lot of custom rom's and everything works fine every time. Yesterday i installed the MIUI 12 Beta chinese version and after i saw that have one global beta version so i download the global one, installed the pre loader to prevent the bricked device and installed the twrp recovery to install the global rom. I wiped everything as always, installed the rom and reboot the phone... Now he doesnt show nothing, just died, he doesn't stuck at boot loader, if i connect him to the power the charging led turns on, he vibrate if i click at the power button but no image at all, nothing...
I tryed to connect to pc and turn it on at fastboot thinking that the ldc pannel was burned but no, the pc iddentifies a divice and 1 sec after he just unplug itself...
Can someone help me?
Click to expand...
Click to collapse
What device shows up? Can you do a lsusb (if you're under linux or can run a linux distro)? If you press Vol+ does anything happen? Does SPFT work?
Beware some people reported problems using the preloader with Android 10.
MOD EDIT: Content removed
Si, ele vibra pero no aparece nada!
u8ububu said:
What device shows up? Can you do a lsusb (if you're under linux or can run a linux distro)? If you press Vol+ does anything happen? Does SPFT work?
Beware some people reported problems using the preloader with Android 10.
Click to expand...
Click to collapse
Well im not using a linux distro but i can install ubunto if needed!
If i pres vol + or - and power after like 10 sec he vibrates but nothing happens...
What is SPFT ?
follow this guide
https://forum.xda-developers.com/redmi-note-8-pro/help/hardbrick-rn8p-t4064637
and use the files from this for your corresponding device
https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/
please dont flash the indian preloader or the lk files or itll be bricked again, use orange fox recovery for andoid 10 as recovery as to avoid bootloop in using reboot to recovery option. (saving you guys some money and time, had to reflash my phone a couple times before just sticking to miui 12 with custom recovery
jhrolife said:
Well im not using a linux distro but i can install ubunto if needed!
If i pres vol + or - and power after like 10 sec he vibrates but nothing happens...
What is SPFT ?
Click to expand...
Click to collapse
SPFT is Mediatek's flashing tool. It is used when their phones hardbrick. You should read about it now.
If the phone vibrates, you most likely have some preloader flashed, the question is which. You should follow the instructions mentioned in iRayn's post above. If you still got the factory preloader, you're in luck, the guide will definitely work.
If you don't have it, you'll likely need to use an authorized account, but first try getting a ubuntu image (you don't need to install it, just run a live version); there's some useful info that can be gathered from lsusb. Particularly if you see 0e8d:0003 in lsusb's output when pressing Vol+, try again with SPFT while pressing Vol+.
iRayn said:
follow this guide
https://forum.xda-developers.com/redmi-note-8-pro/help/hardbrick-rn8p-t4064637
and use the files from this for your corresponding device
https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/
please dont flash the indian preloader or the lk files or itll be bricked again, use orange fox recovery for andoid 10 as recovery as to avoid bootloop in using reboot to recovery option. (saving you guys some money and time, had to reflash my phone a couple times before just sticking to miui 12 with custom recovery
Click to expand...
Click to collapse
IT WORKS! My RN8P is alive !!! Thanks alot !!!! You really help me out!
jhrolife said:
IT WORKS! My RN8P is alive !!! Thanks alot !!!! You really help me out!
Click to expand...
Click to collapse
good to know, save files and links for future bricks
A desperate owner here, I recently tried to install a custom rom and to my surprise everything went wrong and to try to fix the problem I tried to flash my device through QFIL and now it doesn't get out of that anymore ...
I tried countless different ones but always the same result.
Can someone help me????