Well, i'm kinda scared because i already installed a lot of custom rom's and everything works fine every time. Yesterday i installed the MIUI 12 Beta chinese version and after i saw that have one global beta version so i download the global one, installed the pre loader to prevent the bricked device and installed the twrp recovery to install the global rom. I wiped everything as always, installed the rom and reboot the phone... Now he doesnt show nothing, just died, he doesn't stuck at boot loader, if i connect him to the power the charging led turns on, he vibrate if i click at the power button but no image at all, nothing...
I tryed to connect to pc and turn it on at fastboot thinking that the ldc pannel was burned but no, the pc iddentifies a divice and 1 sec after he just unplug itself...
Can someone help me?
jhrolife said:
Well, i'm kinda scared because i already installed a lot of custom rom's and everything works fine every time. Yesterday i installed the MIUI 12 Beta chinese version and after i saw that have one global beta version so i download the global one, installed the pre loader to prevent the bricked device and installed the twrp recovery to install the global rom. I wiped everything as always, installed the rom and reboot the phone... Now he doesnt show nothing, just died, he doesn't stuck at boot loader, if i connect him to the power the charging led turns on, he vibrate if i click at the power button but no image at all, nothing...
I tryed to connect to pc and turn it on at fastboot thinking that the ldc pannel was burned but no, the pc iddentifies a divice and 1 sec after he just unplug itself...
Can someone help me?
Click to expand...
Click to collapse
What device shows up? Can you do a lsusb (if you're under linux or can run a linux distro)? If you press Vol+ does anything happen? Does SPFT work?
Beware some people reported problems using the preloader with Android 10.
MOD EDIT: Content removed
Si, ele vibra pero no aparece nada!
u8ububu said:
What device shows up? Can you do a lsusb (if you're under linux or can run a linux distro)? If you press Vol+ does anything happen? Does SPFT work?
Beware some people reported problems using the preloader with Android 10.
Click to expand...
Click to collapse
Well im not using a linux distro but i can install ubunto if needed!
If i pres vol + or - and power after like 10 sec he vibrates but nothing happens...
What is SPFT ?
follow this guide
https://forum.xda-developers.com/redmi-note-8-pro/help/hardbrick-rn8p-t4064637
and use the files from this for your corresponding device
https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/
please dont flash the indian preloader or the lk files or itll be bricked again, use orange fox recovery for andoid 10 as recovery as to avoid bootloop in using reboot to recovery option. (saving you guys some money and time, had to reflash my phone a couple times before just sticking to miui 12 with custom recovery
jhrolife said:
Well im not using a linux distro but i can install ubunto if needed!
If i pres vol + or - and power after like 10 sec he vibrates but nothing happens...
What is SPFT ?
Click to expand...
Click to collapse
SPFT is Mediatek's flashing tool. It is used when their phones hardbrick. You should read about it now.
If the phone vibrates, you most likely have some preloader flashed, the question is which. You should follow the instructions mentioned in iRayn's post above. If you still got the factory preloader, you're in luck, the guide will definitely work.
If you don't have it, you'll likely need to use an authorized account, but first try getting a ubuntu image (you don't need to install it, just run a live version); there's some useful info that can be gathered from lsusb. Particularly if you see 0e8d:0003 in lsusb's output when pressing Vol+, try again with SPFT while pressing Vol+.
iRayn said:
follow this guide
https://forum.xda-developers.com/redmi-note-8-pro/help/hardbrick-rn8p-t4064637
and use the files from this for your corresponding device
https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/
please dont flash the indian preloader or the lk files or itll be bricked again, use orange fox recovery for andoid 10 as recovery as to avoid bootloop in using reboot to recovery option. (saving you guys some money and time, had to reflash my phone a couple times before just sticking to miui 12 with custom recovery
Click to expand...
Click to collapse
IT WORKS! My RN8P is alive !!! Thanks alot !!!! You really help me out!
jhrolife said:
IT WORKS! My RN8P is alive !!! Thanks alot !!!! You really help me out!
Click to expand...
Click to collapse
good to know, save files and links for future bricks
A desperate owner here, I recently tried to install a custom rom and to my surprise everything went wrong and to try to fix the problem I tried to flash my device through QFIL and now it doesn't get out of that anymore ...
I tried countless different ones but always the same result.
Can someone help me????
Related
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
Hallo everybody,
I have a question for you, I have a Zuk Z2 (not the pro version) I received this morning the notification for the update to ZUI 2.0.069 and, since I have unlocked bootloader and root, the official update failed, so I downloaded the update .zip file and I installed it from the recovery (TWRP).
The installation went fine but then after the reboot the phone is not turning on anymore.
I guess the phone is not completely off because the white LED is on but when I try to turn it on nothing happen, and if I press the power button for long time I see a black screen with the ZUK logo in the middle but only for a second and then the screen return black.
Also the device is not recognized by the computer.
Do you have any idea what went rong? do you know how to fiy it?
Thank you very much!
VMat21 said:
Hallo everybody,
I have a question for you, I have a Zuk Z2 (not the pro version) I received this morning the notification for the update to ZUI 2.0.069 and, since I have unlocked bootloader and root, the official update failed, so I downloaded the update .zip file and I installed it from the recovery (TWRP).
The installation went fine but then after the reboot the phone is not turning on anymore.
I guess the phone is not completely off because the white LED is on but when I try to turn it on nothing happen, and if I press the power button for long time I see a black screen with the ZUK logo in the middle but only for a second and then the screen return black.
Also the device is not recognized by the computer.
Do you have any idea what went rong? do you know how to fiy it?
Thank you very much!
Click to expand...
Click to collapse
You've bricked your phone, you can recover it with qpst tool. For instructions head over to zukfans.eu
Thank you for your answer.
Yes I was able to recover my phone thanks to the help of zukfans.eu guys, but not with qpst tool, now everything works properly.
Teo21 said:
but not with qpst tool
Click to expand...
Click to collapse
What did you used then? can you help us with the procces? If I ever brick my phone it would be a great help
PHRuiz said:
What did you used then? can you help us with the procces? If I ever brick my phone it would be a great help
Click to expand...
Click to collapse
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
VMat21 said:
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
Click to expand...
Click to collapse
If you can post the link of the dicussion at zukfans.eu can be very usefull thank you
Verolive said:
If you can post the link of the dicussion at zukfans.eu can be very usefull thank you
Click to expand...
Click to collapse
Sure, no problem, here is the link to the discussion:
http://zukfans.eu/community/threads/zui-2-0-069-released.87/page-3
I hope it will be helpful!
I bought the Zuk z2 (no Pro) on zukmobile.cc, i dont have received it yet, but they sent me this email:
Dear Customer, Sorry for disturbing you. We just got the latest news from factory that as the bug of the current OS, please do not update your firmware when you received the OS Update Remainder. We will release a formal update later, please kindly noticed. Any question, please contact us. Have a nice day! Lenovo ZUK Mobile
Hope i had helped =)
VMat21 said:
Sure, no problem, here is the link to the discussion:
http://zukfans.eu/community/threads/zui-2-0-069-released.87/page-3
I hope it will be helpful!
Click to expand...
Click to collapse
Hi...if you still have the update.zip, could you please updload it somewere? Do you know where to find rom in zip format for recovery?
i have the same problem with my phone i bricked it obviously and now no fastboot or edl mode or anything...... any ideas?
Slorks said:
i have the same problem with my phone i bricked it obviously and now no fastboot or edl mode or anything...... any ideas?
Click to expand...
Click to collapse
It will go to edl
Doesnt zuk logo comes or not
There is a buttom combinatoin to take it to edl mode
visit zukfans.eu for more info
can you help me to get into the fastboot mode using adb comand?
can you help me to get into the fastboot mode using adb comand?
VMat21 said:
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
Click to expand...
Click to collapse
To start your device in edl mode. Just press ans hold volume down button, then connect your usb cable.
Install qualcomm drivers and flash wigh qfil or xiaomi miflash tool.
Sent from my ZUK Z2121 using Tapatalk
I recently bought zuk 2 mobile and facing issue from the very first day.once screen locked after some time led notification light turns on ,further phone doesn't respond either through power button or through finger scanner and required to force reboot phone. I requested for replacement phone but my bad ,even new replaced phone also showing same issue.
Is that manufacturing issue since replaced phone also shows same issue.
Ronish said:
I recently bought zuk 2 mobile and facing issue from the very first day.once screen locked after some time led notification light turns on ,further phone doesn't respond either through power button or through finger scanner and required to force reboot phone. I requested for replacement phone but my bad ,even new replaced phone also showing same issue.
Is that manufacturing issue since replaced phone also shows same issue.
Click to expand...
Click to collapse
If you have i modded international rom, that might cause your problems. Use official zuk rom, if you want international flash cm13 or another one.
Sent from my ZUK Z2121 using Tapatalk
bricked zuk z2
hey guys and girls
I have a problem with Zuk Z2
The problem is that when the flash-in phone automatically disconnected and I have uploaded all the files you need.
The phone starts but before my eyes:
MAIN MENU:
-reboot
-install update package
-poweroff
When you select "install the update package," the message "system will now install update.zip root directory of the system partition in first ..."
Please help Someone may have a similar case? I know, I'm green: /
cukierunio/candyman said:
hey guys and girls
I have a problem with Zuk Z2
The problem is that when the flash-in phone automatically disconnected and I have uploaded all the files you need.
The phone starts but before my eyes:
MAIN MENU:
-reboot
-install update package
-poweroff
When you select "install the update package," the message "system will now install update.zip root directory of the system partition in first ..."
Please help Someone may have a similar case? I know, I'm green: /
Click to expand...
Click to collapse
I do not understand what you meant when you say " The problem is that ......... file you need"
It appears that when you boot your phone went to stock recovery mode instead of normal mode. If you can not boot it to normal you might need to flash the firmware.
Unroot
How to unroot Lenovo Z2 plus
Hi I had (in fact I still have) one zuk z2 plus 2131, bought by gearbest.
Stock rom installed, unloock bootloader, install TWRP ...
was fine, then I did something in engineering mode,
He went bootloop.
I tried to reinstall everything from TWRP, nothing to do ....
I tried then with QFIL (but I had not read that I need to lock the bootloader)
and it did not ...
I did it again bootloader block and reinstalled both QFIL that with MIFLASH but continues bootloop, can someone help me ....
I still can get into 9008 I would not even play me this opportunity
!^@R said:
How to unroot Lenovo Z2 plus
Click to expand...
Click to collapse
https://zukfans.eu/community/threads/zuk-z2-bootloader-unlock.62/
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
baonxxx said:
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
I have exactly the same problem, but i had the stock ROM installed before flashing by twrp..
Still don't know how to fix it.
Fede2797 said:
I have exactly the same problem, but i had the stock ROM installed before flashing by twrp..
Still don't know how to fix it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/zen...offical-mm-t3452203/post68476763#post68476763
ill give it a try.... using xfstk , will report soon
baonxxx said:
so im from cm 13 lastest build , and then i wipe data from twrp , after that i directly flash MM offical rom and its done without any problem. the problem start after i reboot system. my phone just vibrating twice with no lights led on , no screen on , no asus logo , can't go to recovery nor fastboot just keep restarting i guess because after a couple minute it vibrate again.
when i charge it wont show charging battrey , only stuck at battrey logo with zap with no charging animation.
don't have any clue. can anyone help ?
try to connect to pc but only show "moorefield" with (?).
sorry for my bad english.
Click to expand...
Click to collapse
Fede2797 said:
I have exactly the same problem, but i had the stock ROM installed before flashing by twrp..
Still don't know how to fix it.
Click to expand...
Click to collapse
Follow the steps what sukhwant717 helped me with. The flash tool was failing after I did the xFSTK downloader. I used .194 and followed his steps and finally got back in my phone after messing with it all day yesterday with a hard brick.
http://forum.xda-developers.com/zen...-remote-flashcmds-t3452495/page2#post68477517
quarterbreed said:
Follow the steps what sukhwant717 helped me with. The flash tool was failing after I did the xFSTK downloader. I used .194 and followed his steps and finally got back in my phone after messing with it all day yesterday with a hard brick.
http://forum.xda-developers.com/zen...-remote-flashcmds-t3452495/page2#post68477517
Click to expand...
Click to collapse
The thing is i can't do anything.. The phone won't turn on nor charge, i'm trying to do that xFSTK thing
quarterbreed said:
Follow the steps what sukhwant717 helped me with. The flash tool was failing after I did the xFSTK downloader. I used .194 and followed his steps and finally got back in my phone after messing with it all day yesterday with a hard brick.
http://forum.xda-developers.com/zen...-remote-flashcmds-t3452495/page2#post68477517
Click to expand...
Click to collapse
im stuck in xfstk downloader , my device detected under intelsoc as moorfield , but after press downloading ifwi my phone reboot and not detected by my pc , i should press the power and vol down to make my pc detect my phone , but xfstk have only 20 attemped try that make it failure.
check my log here http://pastebin.com/GTrjP0Jj
=============================================================
don't have idea why , i just depressed press the download button , and it say os download compleate , my phone boot up now.thanks for everyone who help , god bless you
baonxxx said:
im stuck in xfstk downloader , my device detected under intelsoc as moorfield , but after press downloading ifwi my phone reboot and not detected by my pc , i should press the power and vol down to make my pc detect my phone , but xfstk have only 20 attemped try that make it failure.
check my log here http://pastebin.com/GTrjP0Jj
=============================================================
don't have idea why , i just depressed press the download button , and it say os download compleate , my phone boot up now.thanks for everyone who help , god bless you
Click to expand...
Click to collapse
Can you tell me how did you do to make intelsoc detect your device? i just can't, in the device manager it never appears as moorefield
baonxxx said:
im stuck in xfstk downloader , my device detected under intelsoc as moorfield , but after press downloading ifwi my phone reboot and not detected by my pc , i should press the power and vol down to make my pc detect my phone , but xfstk have only 20 attemped try that make it failure.
check my log here http://pastebin.com/GTrjP0Jj
=============================================================
don't have idea why , i just depressed press the download button , and it say os download compleate , my phone boot up now.thanks for everyone who help , god bless you
Click to expand...
Click to collapse
This could be the reason:
Code:
gpflags -- 0x800000807
I think it needs to have four zeroes instead of five:
Code:
0x80000807
Give it a try, good luck. I haven't had the luck to get the device detected.
Fede2797 said:
Can you tell me how did you do to make intelsoc detect your device? i just can't, in the device manager it never appears as moorefield
Click to expand...
Click to collapse
what windows did you use ? im using windows 10.
https://www.youtube.com/watch?v=ft4ZgZpnyQc < watch this , if you failed install from inf file thats mean its already installed , just install isoc driver.
https://www.youtube.com/watch?v=71YAIw7_-kg < this one how to boot from advance startup.
quarterbreed said:
Follow the steps what sukhwant717 helped me with. The flash tool was failing after I did the xFSTK downloader. I used .194 and followed his steps and finally got back in my phone after messing with it all day yesterday with a hard brick.
http://forum.xda-developers.com/zen...-remote-flashcmds-t3452495/page2#post68477517
Click to expand...
Click to collapse
thanks for the info sir , i try this one too and now my phone bootup . cheers
i installed cm14.1 today from the cyanogenmod website i had everything running fine until i reboot into recovery. i got a black screen and it didnt bot into recovery at all so i held my power button and volume down and nothing happens. i cant even boot up into fast boot or anything. nothing is turning my phone on. when i connect it to my pc nothing happens. is there anything i can do?
There's a mega unbrick guide for the OnePlus 3, use that then install the correct firmware and install the custom TWRP and re flash the ROM
i tried that method but the device doesnt even show up on my pc
envious86 said:
i tried that method but the device doesnt even show up on my pc
Click to expand...
Click to collapse
Get this sorted yet? You'll need a modified TWRP recovery for the newest CM based builds. I went through the same thing yesterday or the day before. Try holding volume down and power for like 30 seconds until you feel it vibrate that it is rebooting. Then hold volume *UP* while it reboots or if you see the "your device is not safe..." flash screen hurry and press volume down and go into fastboot. From there you can fastboot flash a new recovery.
I had the same problem as well, in device manager go to ports (com & LPT) and it will show up there under qualcum device. Don't forget to go and turn off certificate verification
Thanks guys I'll try this after work. Hopefully it works. If not sure oneplus are hopefully releasing a new phone soon
No it didn't work. I have a feeling I deleted something I shouldn't have because I was clearing out my files before I restarted and that was that.
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Just use the recovery rahditzz provided you with a link, if your phone is stuck on black screen with white led hold your power button until it turns off, then boot to fastboot and flash the recovery and you will boot...
rahditzz said:
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Click to expand...
Click to collapse
thanks didnt work. when i fastboot flash recovery and boot again it just goes into a black screen again
Then use unbrick method 2..
rahditzz said:
Then use unbrick method 2..
Click to expand...
Click to collapse
neither method works. all i can do is get into fastboot mode thats it. it wont show up on my pc at all
Method 2 workshop 100%, unless its a hardware fault..
Are you pushing volume up while plugging in cable?
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
I jeep getting the sahara communication failed error
envious86 said:
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
Click to expand...
Click to collapse
Your running vista???? Good god update your OS!!
Maybe your fastboot drivers got updated? There were some reports around this. You could try reinstalling the drivers and following the unbrick guide without an internet connection.
Sent from my ONEPLUS A3003 using Tapatalk
Cool u can boot into Fastboot, what error do you get when you type Fastboot devices? Nothing shows up?
Hi Guys,
Yesterday during an official update of my oneplus 5t (using the update manager from the phone itself), the phone got bricked and i dont know why....
So after some research i found it is hard bricked ( basically i cant do nothing, power on i cant, power +volume UP/DOWN too, and even when i plug the charge cable i have neither vibrations nor LED on)
So i follow this tutorial to unbrick the phone:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unbricking-tool-confirmation-t3733012
I could get the phone recognize by the PC by pressing UP to see the phone as QUSB-BULK and then QUALCOMM QD LOADER after driver's update.
But when i run MSMDownloadTool ( V4.0.27 dumpling 43_0.36_180613) as administrator and click on start, the process get stuck in "waiting for device"
the status of connection before click on start was "connected" and after click and some process it turn to N/A
the status of communication is "memory size....."
status of last communication is "waiting for device"
I have tried several time and always the same result..... stuck in the waiting device
does someone have an idea on how to solve this? because i really need to unbrick the phone....
thank you in advance
EDIT:
I tried another version of MsmDownloadTool (dumpling_43_O.06_171206) and this time, the downloading of cache image failed....
I dont know what to do
You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?
DaRk-L0rD said:
You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?
Click to expand...
Click to collapse
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.
rokusho32 said:
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.
Click to expand...
Click to collapse
Thing are much easier with the unlocked bootloaders!
Charge your phone all night long even if you don't see any sign of life (green or red led light).
Then hold together the Volume UP button and the power button for few seconds into the fastboot mode (hold both buttons for at least 10 seconds) and let me know.
DaRk-L0rD said:
Thing are much easier with the unlocked bootloaders!
Charge your phone all night long even if you don't see any sign of life (green or red led light).
Then hold together the Volume UP button and the power button for few seconds into the fastboot mode (hold both buttons for at least 10 seconds) and let me know.
Click to expand...
Click to collapse
I tried this before and nothing happened....
then when i connect to the pc by pressing UP+ power button, the pc detected it as QUSB_BULK then i install the qualcomm driver and finally i could see the phone in the usb device.
But after MSMDownloadTool step, the process got stuck and display "memory size" as explained in the thread.
rokusho32 said:
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.
Click to expand...
Click to collapse
rokusho32 said:
I tried this before and nothing happened....
then when i connect to the pc by pressing UP+ power button, the pc detected it as QUSB_BULK then i install the qualcomm driver and finally i could see the phone in the usb device.
But after MSMDownloadTool step, the process got stuck and display "memory size" as explained in the thread.
Click to expand...
Click to collapse
Go here:
https://forum.xda-developers.com/showpost.php?p=74504343&postcount=3
Follow the instructions for the adb drivers installation.
Once done that, let me know
DaRk-L0rD said:
Go here:
https://forum.xda-developers.com/showpost.php?p=74504343&postcount=3
Follow the instructions for the adb drivers installation.
Once done that, let me know
Click to expand...
Click to collapse
I have installed the ADB drivers
which version of MSMDownloadTool should i use?
DaRk-L0rD said:
You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?
Click to expand...
Click to collapse
I know this is an old thread, but I'm hoping you have an idea. I have bricked my rooted OnePlus6. I did have Magisk installed. Bootloader was unlocked. I was able to factory reset the phone, but the bootloader was still locked (I had TWRP installed and factory reset using it). I then used Fastboot to relock the bootloader, and that's when my troubles started. I could only get into Fastboot. I found a solution on the web, installed the Qualcomm drivers (and they recognize my device, which I connected by holding down the volume up button before connecting to the USB cable), and started the OnePlus 6 (MSM) unbrick tool. However, it just sits there saying "waiting for device". I actually seem to have two entries for the device, one saying Index and one saying "1" (although I think the device is on COM3). Should it take forever? How can I get it past "Waiting for device". Thanks.
rcbjr2 said:
I know this is an old thread, but I'm hoping you have an idea. I have bricked my rooted OnePlus6. I did have Magisk installed. Bootloader was unlocked. I was able to factory reset the phone, but the bootloader was still locked (I had TWRP installed and factory reset using it). I then used Fastboot to relock the bootloader, and that's when my troubles started. I could only get into Fastboot. I found a solution on the web, installed the Qualcomm drivers (and they recognize my device, which I connected by holding down the volume up button before connecting to the USB cable), and started the OnePlus 6 (MSM) unbrick tool. However, it just sits there saying "waiting for device". I actually seem to have two entries for the device, one saying Index and one saying "1" (although I think the device is on COM3). Should it take forever? How can I get it past "Waiting for device". Thanks.
Click to expand...
Click to collapse
I have same situation.. did you resolve this problem?
piechu11 said:
I have same situation.. did you resolve this problem?
Click to expand...
Click to collapse
I contacted OnePlus and I sent them the phone and they reinstalled the operating system. I was never able to fix it myself. I even had an online session with OnePlus and they couldn't get the MSM software to recognize the phone (even though it was truly connected to my laptop). I also had an issue with my OnePlus 8T that got messed up doing something with Magisk, and OnePlus reinstalled the operating system as well. I still can't boot from the A partition though; just the B partition.
piechu11 said:
I have same situation.. did you resolve this problem?
Click to expand...
Click to collapse
Okay, for anyone facing same problem as me, i found solution (working for me). Before using MSM Tool, you need to install Qualcomm USB Drivers.
During instalation you need to choose second option "ETHERNET-DHCP"!
At first, I chose WWAN-DHCP - which caused problem with connection
piechu11 said:
Okay, for anyone facing same problem as me, i found solution (working for me). Before using MSM Tool, you need to install Qualcomm USB Drivers.
During instalation you need to choose second option "ETHERNET-DHCP"!
View attachment 5511425
At first, I chose WWAN-DHCP - which caused problem with connection
Click to expand...
Click to collapse
Thank you this solved my problem exactly.
i was restoring my metro by tmobile oneplus nord n10 BE2025 model with build tag BE88CF