I have rooted my xperia t2 ultra dual with kingroot ,and tried to replace with super su binaries, and rebooted my mobile,it boots successfully and then screen is blank,cannot see anything, but by pressing power power button it appears power off,restart ,screenshot ....how should I solve this plz help anyone it's urgent...
Thanks in advance
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Edwin Hamal said:
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Click to expand...
Click to collapse
Wants to revert to stock rom
Edwin Hamal said:
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Click to expand...
Click to collapse
Wants to revert to stock rom
Plz help
Just download this file: https://mega.nz/#!PBEWiTYT!s9IaGIBLziIhgwJzqkmrFa5fFYE95RsGh4rxKa7cCwE
and flash it via twrp recovery.
Edwin Hamal said:
Just download this file: https://mega.nz/#!PBEWiTYT!s9IaGIBLziIhgwJzqkmrFa5fFYE95RsGh4rxKa7cCwE
and flash it via twrp recovery.
Click to expand...
Click to collapse
Thanks ,a lot but how to install twrp when iam stucked in a bootloop
agriculture said:
Thanks ,a lot but how to install twrp when iam stucked in a bootloop
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2764408 This will help you and also have you installed adb and fastboot in your pc? If not first install it.
Also don't forget to install the drivers as well.
T2 ultra dual cant turn on and cant charge
T2 ultra dual tried to charge it in a wall charger and tried it in usb connected to desktop charge but it only shows me a blinking red notification light.
i tried to turn it on but it wont. i tried to hard reset it with power button + volume up but nothing happen
Happened the same with me
So here's what I did
Use a branded data cable
And a 2amps output charger
Connect both
And connect it to your t2
Turn on the power of charger
As soon you see sony logo turn on the t2 normally
If it doesn't show sony logo,then disconnect everything and reconnect and repeat the procedure until it shows the sony logo
And don't let the battery go below 5 percent
Keep it to charge if battery is below 5 or 3
So yo won't have to do the 3 minutes procedure once again
And yeah..use a stable base..don't let the charging pin or mobile move during this process
For the question asked by narendra17
or just get ur charging slot replaced
Related
Hi XDA,
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
SuperUub said:
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
Click to expand...
Click to collapse
If not even adb detects it, i'm pretty sure you're buggered, mate.
did you try and leave the battery out for some 10 min or more?
If adb does not detect the phone after that, then it seems to be a brick for real.
Is your phone stop at the "samsung" when you turn on your phone?
If is this,it's very easy to unbrick
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
+
Yes this way usually works. I've tested this way.
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Odin to detect
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
I had my mainboard replaced at a service center... Probably not the news you would have liked, but I'm afraid that's your next step as well.
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
This worked for me too, try to charge your battery in another phone if possible
bobcota said:
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
Click to expand...
Click to collapse
same problem
same problem here
voetbalremco said:
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Click to expand...
Click to collapse
i also have the same prblem here just now , i tried to flash this ROM but i forgot to wipe data/factory reset the phne and i unintentionally flashed the rom without wiping it :'( and now, dont boot at all but can still turned on and ended up just "samsung" appearing on the screen . please help :crying::crying:
I've bricked my Galaxy Gio when i flashed a custom kernel.
Hi There I also have the same problem. I installed Galaxy Ace's Kernel onto my Galaxi Gio, Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
S[B said:
[/B]uperUub;20668671]Hi XDA!
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Click to expand...
Click to collapse
Not either going to Download Mode
trackIDtracker said:
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Click to expand...
Click to collapse
Hey, my accidentally bricked my xperia s and now I'm trying to flash a stock kernel. Now phone is boot looping I can open flashmode without a problem while holding power button and volume down but the problem is that it restarts when flashing. All drivers are installed and device manager says that it's semc flash device. thanks fo any help. log here postimg.org/image/fju7lxrg3/
Just make sure you have sufficiently charged...while its turning on or you see boot animation or Sony logo press n hold power+volume up...then try to enter to flash mode
nageswarswain said:
Just make sure you have sufficiently charged...while its turning on or you see boot animation or Sony logo press n hold power+volume up...then try to enter to flash mode
Click to expand...
Click to collapse
i had removed battery and charged it with an universal charger and i'm entering into flashmode without any problem just that my phone restarts when I start flashing.
Have you unlocked your boot loader
nageswarswain said:
Have you unlocked your boot loader
Click to expand...
Click to collapse
yep i unlocked it. More ideas?
Flash doomlords kernel via fastboot....then reboot to system....if it will not boot successfully then push a ROM zip by adb push and flash it....one more thing just check whether your phone is connecting to PC via fastboot or flashmode.
.
The best way to check is by flashtool...open flashtool software on PC and then connect your phone via fastboot/flashmode and see the status at PC flashtool....if its connecting then flash stock ftf and if not then 1st install drivers..
nageswarswain said:
Flash doomlords kernel via fastboot....then reboot to system....if it will not boot successfully then push a ROM zip by adb push and flash it....one more thing just check whether your phone is connecting to PC via fastboot or flashmode.
.
The best way to check is by flashtool...open flashtool software on PC and then connect your phone via fastboot/flashmode and see the status at PC flashtool....if its connecting then flash stock ftf and if not then 1st install drivers..
Click to expand...
Click to collapse
yep, now i broke my xperia s even more. It can't even boot properly i think now it has a hard brick. No lights, no signs of life but when connected to pc it shows something like QHSUSB_DLOAD, is it possible to fix it at home?
temorinkaari said:
yep, now i broke my xperia s even more. It can't even boot properly i think now it has a hard brick. No lights, no signs of life but when connected to pc it shows something like QHSUSB_DLOAD, is it possible to fix it at home?
Click to expand...
Click to collapse
Is it charging or not?BTW what you have done?
nageswarswain said:
Is it charging or not?BTW what you have done?
Click to expand...
Click to collapse
There was a red light while charging for an hour or so but after a while it disappeared and now im left with dead phone. I don't even know how it happened, i was on cmw recovery and i formatted something, after i restarted my phone it started being like this. I heard that it's possible to repair boot by software called S1tool but i can't find any information about doing this on xperia s.
temorinkaari said:
There was a red light while charging for an hour or so but after a while it disappeared and now im left with dead phone. I don't even know how it happened, i was on cmw recovery and i formatted something, after i restarted my phone it started being like this. I heard that it's possible to repair boot by software called S1tool but i can't find any information about doing this on xperia s.
Click to expand...
Click to collapse
Have you tried to recover it with flashtool
nageswarswain said:
Have you tried to recover it with flashtool
Click to expand...
Click to collapse
I'm not able to boot into flashmode and fastboot mode. I'm telling you that my boot is dead.
temorinkaari said:
I'm not able to boot into flashmode and fastboot mode. I'm telling you that my boot is dead.
Click to expand...
Click to collapse
Then you need some more may be a JTag.....
temorinkaari said:
There was a red light while charging for an hour or so but after a while it disappeared and now im left with dead phone. I don't even know how it happened, i was on cmw recovery and i formatted something, after i restarted my phone it started being like this. I heard that it's possible to repair boot by software called S1tool but i can't find any information about doing this on xperia s.
Click to expand...
Click to collapse
temorinkaari said:
I'm not able to boot into flashmode and fastboot mode. I'm telling you that my boot is dead.
Click to expand...
Click to collapse
As far as I know, it is not possible to wipe partition from CWM (if You selected from one of the options from menu) which would lead to hard brick.
Let us start with basics. Can You tell Me which kernel You flashed to get CWM? Also, is there any vibration when You press and hold power button and volume up key together?
Mirhawk said:
As far as I know, it is not possible to wipe partition from CWM (if You selected from one of the options from menu) which would lead to hard brick.
Let us start with basics. Can You tell Me which kernel You flashed to get CWM? Also, is there any vibration when You press and hold power button and volume up key together?
Click to expand...
Click to collapse
Doomlord kernel and there is no vibration at all.
temorinkaari said:
Doomlord kernel and there is no vibration at all.
Click to expand...
Click to collapse
Can You give Me link of the kernel You used, just to see if it has any problems. Also, for how long did You hold the combination? You need to hold it for at least 10 to 15 seconds.
Mirhawk said:
Can You give Me link of the kernel You used, just to see if it has any problems. Also, for how long did You hold the combination? You need to hold it for at least 10 to 15 seconds.
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=2305591 this one. Yes i know how that combination works, no luck at all, no reaction. I'm still think that my boot is dead.
temorinkaari said:
forum.xda-developers.com/showthread.php?t=2305591 this one. Yes i know how that combination works, no luck at all, no reaction. I'm still think that my boot is dead.
Click to expand...
Click to collapse
Huh, that kernel should have worked. I asked for the combination duration since many people make mistakes there. Since we are clear of that, did You try the rubber band trick from here? That trick sometimes takes more than a day to work.
Yep i did that and i tried many different ways to make it work.. no luck. i got annoyed and i sent it to the repairs today...
Friends, first of all thank you very much. My E975 is a brick, the red light is fixed when I put it to load, the PC does not detect it and I'm sad about it. Rom R RRemix 5.1.1. I would like to know how to load a KDZ to revive ? I tried combinations of power and volume buttons up or down and nothing happens ... lot of thanks
I forget: No Recovery No Download Mode ?
All you can do it is throw it in to trash and buy new phone and dont install custom roms if youre noob!
Can you describe what happened to your phone ? I haven't got that kind of experience, at least I managed to custom recovery..
dfernandopm said:
Friends, first of all thank you very much. My E975 is a brick, the red light is fixed when I put it to load, the PC does not detect it and I'm sad about it. Rom R RRemix 5.1.1. I would like to know how to load a KDZ to revive ? I tried combinations of power and volume buttons up or down and nothing happens ... lot of thanks
Click to expand...
Click to collapse
bro sometimes you have to push your button hardly dont worry
Hold vol+ and down hardly Then plug datacable into your cellphone then you can flash kdz (download mode)
if it does not work..!! then try to hold just vol Up But and insert datacable
Thanks for trying to help ... When connecting the charger the LED is fixed constant .. What does that mean?
dfernandopm said:
Friends, first of all thank you very much. My E975 is a brick, the red light is fixed when I put it to load, the PC does not detect it and I'm sad about it. Rom R RRemix 5.1.1. I would like to know how to load a KDZ to revive ? I tried combinations of power and volume buttons up or down and nothing happens ... lot of thanks
Click to expand...
Click to collapse
The most probable explanation is that you're on a custom kernel and you've exhausted your battery to total zero. .
You can recharge it back by using a more powerful charger like a 2A/2000mA charger or above
(but not too much) like provided with Galaxy note 2/3/3 neo etc
dfernandopm said:
Thanks for trying to help ... When connecting the charger the LED is fixed constant .. What does that mean?
Click to expand...
Click to collapse
MasterFURQAN said:
The most probable explanation is that you're on a custom kernel and you've exhausted your battery to total zero. .
You can recharge it back by using a more powerful charger like a 2A/2000mA charger or above
(but not too much) like provided with Galaxy note 2/3/3 neo etc
Click to expand...
Click to collapse
Thanks, when it was shut off and charging the battery is the R Remix Rom 5.1.1
try this hard brick repair pack: https://mega.nz/#!64hHwATa!h04qnOp9gSS81sIuE6ULBO24j3tnexJ0Z0O68Mt1GpU
tutorial included.
Thanks man...
If nothing helps. Disassemble your phone, try to disconnect and reconnect your battery from the motherboard.
Ok malimukk
hi,first of all my English isn't very good,sorry for that. my phone (Sony Xperia S (LT26i)) is dead and i can't turn it ON it also can't keep his charge even sometimes it was charging. So i decided to change my battery. I bought a BA800 battery and change it myself according to a video i saw on YouTube. after all my phone doesn't start up even i plug in it to adapter. just sometimes the logo of a repair appears and after few minutes it dissapers. when i plug in it to electricity the LED will be red. i don't know what is the problem !?
a repair man said that a new battery is ruined. so he change to a new battery but it doesn't start again and he says that it most be flashed but he can't flash it!
i myself searching internet and follow up structures (download flashtool,installing drivers,download ftf,....) but now when i press volume down my phone doesn't connect to PC. before it i haven't such a problem, i don't know what i have changed! please help me. my phone doesn't start up anymore and i can't change usb debugging mode or mtp. in device manage has yellow trianlges on some part including MTP USB device,Android device(Sony AFBI interface,sony composite ADB interface,sony fastboot interface),61833 class buss device.
mischievous68 said:
hi,first of all my English isn't very good,sorry for that. my phone is dead and i can't turn it ON it also can't keep his charge even sometimes it was charging. So i decided to change my battery. I bought a BA800 battery and change it myself according to a video i saw on YouTube. after all my phone doesn't start up even i plug in it to adapter. just sometimes the logo of a repair appears and after few minutes it dissapers. when i plug in it to electricity the LED will be red. i don't know what is the problem !?
a repair man said that a new battery is ruined. so he change to a new battery but it doesn't start again and he says that it most be flashed but he can't flash it!
i myself searching internet and follow up structures (download flashtool,installing drivers,download ftf,....) but now when i press volume down my phone doesn't connect to PC. before it i haven't such a problem, i don't know what i have changed! please help me. my phone doesn't start up anymore and i can't change usb debugging mode or mtp. in device manage has yellow trianlges on some part including MTP USB device,Android device(Sony AFBI interface,sony composite ADB interface,sony fastboot interface),61833 class buss device.
Click to expand...
Click to collapse
Was the phone unlocked???
What is the last thing you are doing when your phone gone to this??
nageswarswain said:
Was the phone unlocked???
What is the last thing you are doing when your phone gone to this??
Click to expand...
Click to collapse
how I can check my phone is locked or unlocked ?!
my phone was running,i turned it off, after that I replace my new battery (BA800) with old one and it gone to this mode.
mischievous68 said:
how I can check my phone is locked or unlocked ?!
my phone was running,i turned it off, after that I replace my new battery (BA800) with old one and it gone to this mode.
Click to expand...
Click to collapse
Check with another battery or try the old battery.
.
nageswarswain said:
Check with another battery or try the old battery.
.
Click to expand...
Click to collapse
I did it but it doesn't work.
mischievous68 said:
I did it but it doesn't work.
Click to expand...
Click to collapse
Goto Sony care
sony xperia s boots into recovery
hello , i have sony xperia s(lt26i) and i flash a miui 7 in xperia s using twrp recovery ,after that my phone working fine but when i tried to reboot and it goes into twrp again and again .please help me with that ,how to get out of loop of twrp recovery....?:crying::crying:
Satish2211 said:
hello , i have sony xperia s(lt26i) and i flash a miui 7 in xperia s using twrp recovery ,after that my phone working fine but when i tried to reboot and it goes into twrp again and again .please help me with that ,how to get out of loop of twrp recovery....?:crying::crying:
Click to expand...
Click to collapse
Clean flash ROM again
Try charging it at your pc with usb for some hours, it could fix the problem.
U may hv did this
Satish2211 said:
hello , i have sony xperia s(lt26i) and i flash a miui 7 in xperia s using twrp recovery ,after that my phone working fine but when i tried to reboot and it goes into twrp again and again .please help me with that ,how to get out of loop of twrp recovery....?:crying::crying:
Click to expand...
Click to collapse
I think u flashed recovery into boot.....possibly....
---------- Post added at 02:39 AM ---------- Previous post was at 02:38 AM ----------
Satish2211 said:
hello , i have sony xperia s(lt26i) and i flash a miui 7 in xperia s using twrp recovery ,after that my phone working fine but when i tried to reboot and it goes into twrp again and again .please help me with that ,how to get out of loop of twrp recovery....?:crying::crying:
Click to expand...
Click to collapse
What command did u use to flash recovery?
Satish2211 said:
hello , i have sony xperia s(lt26i) and i flash a miui 7 in xperia s using twrp recovery ,after that my phone working fine but when i tried to reboot and it goes into twrp again and again .please help me with that ,how to get out of loop of twrp recovery....?:crying::crying:
Click to expand...
Click to collapse
Or extract boot.IMG from miui ROM zip and flash it by flashtool
I have a Xperia m dual c2004 which was bricked while i flashed root kernel. The flashing process failed due to insufficient drivers. Now my phone won't boot, enter flash mode or fastboot.
:crying: :crying: :crying: :crying:
When i tried to power on the phone the red LED blinks three times and the phone just turn off
Please help me with this issue.!!
amalantony said:
I have a Xperia m dual c2004 which was bricked while i flashed root kernel. The flashing process failed due to insufficient drivers. Now my phone won't boot, enter flash mode or fastboot.
:crying: :crying: :crying: :crying:
When i tried to power on the phone the red LED blinks three times and the phone just turn off
Please help me with this issue.!!
Click to expand...
Click to collapse
Flash stock rom once
simmusss said:
Flash stock rom once
Click to expand...
Click to collapse
it won't enter fastboot or flashmode. So its unable
Have you tried charging your phone yet?
Your battery is empty... So remove your battery.charge it by some external chargers...may be try with another battery of your friends Xperia M if any...
Because with a broken kernel it will take more time even days to charge enough to take the mobile to fastboot or flashmode.
nageswarswain said:
Your battery is empty... So remove your battery.charge it by some external chargers...may be try with another battery of your friends Xperia M if any...
Because with a broken kernel it will take more time even days to charge enough to take the mobile to fastboot or flashmode.
Click to expand...
Click to collapse
OK, will try that.
amalantony said:
I have a Xperia m dual c2004 which was bricked while i flashed root kernel. The flashing process failed due to insufficient drivers. Now my phone won't boot, enter flash mode or fastboot.
:crying: :crying: :crying: :crying:
When i tried to power on the phone the red LED blinks three times and the phone just turn off
Please help me with this issue.!!
Click to expand...
Click to collapse
looks like your phone run out of battery