Friends, first of all thank you very much. My E975 is a brick, the red light is fixed when I put it to load, the PC does not detect it and I'm sad about it. Rom R RRemix 5.1.1. I would like to know how to load a KDZ to revive ? I tried combinations of power and volume buttons up or down and nothing happens ... lot of thanks
I forget: No Recovery No Download Mode ?
All you can do it is throw it in to trash and buy new phone and dont install custom roms if youre noob!
Can you describe what happened to your phone ? I haven't got that kind of experience, at least I managed to custom recovery..
dfernandopm said:
Friends, first of all thank you very much. My E975 is a brick, the red light is fixed when I put it to load, the PC does not detect it and I'm sad about it. Rom R RRemix 5.1.1. I would like to know how to load a KDZ to revive ? I tried combinations of power and volume buttons up or down and nothing happens ... lot of thanks
Click to expand...
Click to collapse
bro sometimes you have to push your button hardly dont worry
Hold vol+ and down hardly Then plug datacable into your cellphone then you can flash kdz (download mode)
if it does not work..!! then try to hold just vol Up But and insert datacable
Thanks for trying to help ... When connecting the charger the LED is fixed constant .. What does that mean?
dfernandopm said:
Friends, first of all thank you very much. My E975 is a brick, the red light is fixed when I put it to load, the PC does not detect it and I'm sad about it. Rom R RRemix 5.1.1. I would like to know how to load a KDZ to revive ? I tried combinations of power and volume buttons up or down and nothing happens ... lot of thanks
Click to expand...
Click to collapse
The most probable explanation is that you're on a custom kernel and you've exhausted your battery to total zero. .
You can recharge it back by using a more powerful charger like a 2A/2000mA charger or above
(but not too much) like provided with Galaxy note 2/3/3 neo etc
dfernandopm said:
Thanks for trying to help ... When connecting the charger the LED is fixed constant .. What does that mean?
Click to expand...
Click to collapse
MasterFURQAN said:
The most probable explanation is that you're on a custom kernel and you've exhausted your battery to total zero. .
You can recharge it back by using a more powerful charger like a 2A/2000mA charger or above
(but not too much) like provided with Galaxy note 2/3/3 neo etc
Click to expand...
Click to collapse
Thanks, when it was shut off and charging the battery is the R Remix Rom 5.1.1
try this hard brick repair pack: https://mega.nz/#!64hHwATa!h04qnOp9gSS81sIuE6ULBO24j3tnexJ0Z0O68Mt1GpU
tutorial included.
Thanks man...
If nothing helps. Disassemble your phone, try to disconnect and reconnect your battery from the motherboard.
Ok malimukk
Related
My defy is dead....
No turn on, no bootloader,.... no turn on the screen.
No function Power + Vol+. No function power + vol-.
LED does not light with or without usb.
Only when I conect to PC and I turn ON, in my pc sounds like when you connect a device, but returns to sound like when you disconnect a device.
I tried leaving it overnight without the battery and nothing ...
The RSD Lite not have time to connect it switches itself off
Help please...
battery dead?
lanfearxt said:
battery dead?
Click to expand...
Click to collapse
i think that no because my pc sounds when turn on, but off again at 2 seconds
What have you done to cause this?
Sent from my Blade using XDA Premium App
Hi all
May be downgrade sbf version ?
Sent from my MB525 using XDA App
yesterday suddenly turned off when the battery is almost full ...
Hmm you should try connecting the phone to pc and then press the "Power" button right after connecting it,see if you get the LED in front of the phone to bright White,if then then use RSD to reflash firmware.
Goodluck.
i think you shoud charge your defy firstly
xtrmshadow said:
Hmm you should try connecting the phone to pc and then press the "Power" button right after connecting it,see if you get the LED in front of the phone to bright White,if then then use RSD to reflash firmware.
Goodluck.
Click to expand...
Click to collapse
The LED not turn on...
zjfgavin said:
i think you shoud charge your defy firstly
Click to expand...
Click to collapse
No charge any any any...
likely is dead battery, or else you have some other sbf that screws up your display. trying flashing it with another sbf file and see?
i had the same problem before
Okk, Im buyed a new battery, Monday arrives....
It's most likely your battery is deaded. But if not,your phone might damaged.
You can charge your battery alone by other charger, and then setup the battery
to see whether it work.
did you try flashing the phone again?? in RDS lite, can the computer detect your phone? if not, then it's dead battery, and you can actually use the macgyver method to 'revive' your phone and flash it.
try reading this link
http://forum.xda-developers.com/showthread.php?t=892026
lanfearxt said:
did you try flashing the phone again?? in RDS lite, can the computer detect your phone? if not, then it's dead battery, and you can actually use the macgyver method to 'revive' your phone and flash it.
try reading this link
http://forum.xda-developers.com/showthread.php?t=892026
Click to expand...
Click to collapse
I go to try this !!!
thanks man !!!!
Not work...
vv
what do you mean not work? what sbf did you use to flash with?? it's definitely gonna be better if you can flash a full working sbf instead of a fixed sbf (cos it wont revive your phone)
if your battery is dead, then the macgyver method definitely will work, unless you have a dead battery AND also a non working sbf that is screwing up your display
not a problem of the battery.
A problem of the phone, when connected to pc recognizes it, but 3 seconds off
Now RSD Lite detect this:
http://img703.imageshack.us/i/capturaxl.png/
And when i try to flash any .sbf, boot only, official .sbf appears this:
http://img854.imageshack.us/i/23479963.png/
Any idea ???
try 2.2.1 rom stock ?
few days ago i tried to flash a new kernal to phone and after flashing the kernal i tried to switch on my device it didnt respond just vibrated and went blank , i tried again to switch on bt it only showed red led light.
Current situtation : phone dead , showing no sign of life
My phone has unlocked bootloader and is rooted .
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
3. tried to connect it to pc bt pc doesnt detect it..
i need help people Please help me
Thank you
axatjpr said:
few days ago i tried to flash a new kernal to phone and after flashing the kernal i tried to switch on my device it didnt respond just vibrated and went blank , i tried again to switch on bt it only showed red led light.
Current situtation : phone dead , showing no sign of life
My phone has unlocked bootloader and is rooted .
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
3. tried to connect it to pc bt pc doesnt detect it..
i need help people Please help me
Thank you
Click to expand...
Click to collapse
check through adb if the phone is getting connected or not.
if not then try booting it into fastboot mode or recovery mode.
all the best :good:
hi
axatjpr said:
few days ago i tried to flash a new kernal to phone and after flashing the kernal i tried to switch on my device it didnt respond just vibrated and went blank , i tried again to switch on bt it only showed red led light.
Current situtation : phone dead , showing no sign of life
My phone has unlocked bootloader and is rooted .
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
3. tried to connect it to pc bt pc doesnt detect it..
i need help people Please help me
Thank you
Click to expand...
Click to collapse
i can repair it ... contact me on gtalk [email protected]
KingWickedd said:
check through adb if the phone is getting connected or not.
if not then try booting it into fastboot mode or recovery mode.
all the best :good:
Click to expand...
Click to collapse
i tried using the adb method bt nothin happened. also fastboot mode not working , i tried to enter it bt it doesnt respond
axatjpr said:
i tried using the adb method bt nothin happened. also fastboot mode not working , i tried to enter it bt it doesnt respond
Click to expand...
Click to collapse
Open flashtool
plug device in flashmode
flash stock ftf
done
ManthanRB said:
Open flashtool
plug device in flashmode
flash stock ftf
done
Click to expand...
Click to collapse
nothing is working , it doesnt respond to anything
only responds when i press power key , it shows red light blinking..
anyone other solution?
that means your battery is dead, leave it on the charger overnight ...
Sent from my Nexus 5 using Tapatalk
axatjpr said:
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
Thank you
Click to expand...
Click to collapse
If after charging the battery, LED still blinks red than may be your battery is dead.
try changing the battery.
also try connecting the phone in flashmode
- keep pressing the back button & while holding the back button connect the usb cable.
if green LED is on than your phone is still good.
Report back!
ManthanRB said:
If after charging the battery, LED still blinks red than may be your battery is dead.
try changing the battery.
also try connecting the phone in flashmode
- keep pressing the back button & while holding the back button connect the usb cable.
if green LED is on than your phone is still good.
Report back!
Click to expand...
Click to collapse
no good .. :/
nothing is working .. anything else u got?
No vibration also?
ManthanRB said:
No vibration also?
Click to expand...
Click to collapse
nope nothing..
its dead.. :/
anything else i could do ?
axatjpr said:
nope nothing..
its dead.. :/
anything else i could do ?
Click to expand...
Click to collapse
You said it was giving vibration before & now nothing, did you tried another fully working & charged battery?
ManthanRB said:
You said it was giving vibration before & now nothing, did you tried another fully working & charged battery?
Click to expand...
Click to collapse
nope i didnt , i will try again today then tell u what happens
btw some other guy told me that phone's hwconfig and semcboot are damaged .
i got no idae abt that..
axatjpr said:
nope i didnt , i will try again today then tell u what happens
btw some other guy told me that phone's hwconfig and semcboot are damaged .
i got no idae abt that..
Click to expand...
Click to collapse
You first try the battery method.
problem solved
ManthanRB said:
You first try the battery method.
Click to expand...
Click to collapse
gave phone to some guy and he repaired the phone for 1500 rupee.. he said he rewrote the software .. something something.. and used credits to repair my phone.. So its working fine now.. just facing the battery issue.. so i guess will replace the battery soon.
Hi,
I got one xiaomi redmi 1s rebooting, I hardest but not working
, so i decided to flash, via fastboot while flashing it stops in 14%.
now phone doesn't power on, while inserting usb, it detect as qualcomm usb in device manager comport.
Need help. how to revive.
riteshgpt60 said:
Hi,
I got one xiaomi redmi 1s rebooting, I hardest but not working
, so i decided to flash, via fastboot while flashing it stops in 14%.
now phone doesn't power on, while inserting usb, it detect as qualcomm usb in device manager comport.
Need help. how to revive.
Click to expand...
Click to collapse
Try Here
Read whole first, then give a try.
presetz said:
Try Here
Read whole first, then give a try.
Click to expand...
Click to collapse
Any one please share me tested solution with easy tutuorial.
riteshgpt60 said:
Any one please share me tested solution with easy tutuorial.
Click to expand...
Click to collapse
Have you read it? If its still not an easy way as it written, than might be someone can.
Sorry just tried to help.
Good luck sir.
presetz said:
Have you read it? If its still not an easy way as it written, than might be someone can.
Sorry just tried to help.
Good luck sir.
Click to expand...
Click to collapse
Hi, I finally flash with this file "armani_global_images_JHCMIBL50.0_4.3_in_111a6a27b4" and flashing process goes fine ,after flash it says to press f8 and I press OK buttom while holding f8 and PC restart, as software
Now phone shows little bip light in home button .
And now it doesn't shows qualcomm device as well, I think, boot is repair but fastboot mode not coming.
Need help.
riteshgpt60 said:
Hi, I finally flash with this file "armani_global_images_JHCMIBL50.0_4.3_in_111a6a27b4" and flashing process goes fine ,after flash it says to press f8 and I press OK buttom while holding f8 and PC restart, as software
Now phone shows little bip light in home button .
And now it doesn't shows qualcomm device as well, I think, boot is repair but fastboot mode not coming.
Need help.
Click to expand...
Click to collapse
Try previous version than 50, might be the 45 as it stable enough, i guess.
And before that, have you charged your phone? Mi recovery wont boot if under 20% battery.
presetz said:
Try previous version than 50, might be the 45 as it stable enough, i guess.
And before that, have you charged your phone? Mi recovery wont boot if under 20% battery.
Click to expand...
Click to collapse
Hi,
After flashing v50, the phone should be working, right?
Im downloading v45, but phone is not detecting with pc . no fastboot , no qualcomm usb , How can I flash now.
thank for guiding.
riteshgpt60 said:
Hi,
After flashing v50, the phone should be working, right?
Im downloading v45, but phone is not detecting with pc . no fastboot , no qualcomm usb , How can I flash now.
thank for guiding.
Click to expand...
Click to collapse
You said the led blinking a litte red light? Try to charged first till its more than 30% batt, and connect again. See if it show in pc
Thanks done after flashing v45
riteshgpt60 said:
Thanks done after flashing v45
Click to expand...
Click to collapse
Im glad to hear that, what an awesome experienced you got isnt it? At least you can learnt something from it
I have rooted my xperia t2 ultra dual with kingroot ,and tried to replace with super su binaries, and rebooted my mobile,it boots successfully and then screen is blank,cannot see anything, but by pressing power power button it appears power off,restart ,screenshot ....how should I solve this plz help anyone it's urgent...
Thanks in advance
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Edwin Hamal said:
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Click to expand...
Click to collapse
Wants to revert to stock rom
Edwin Hamal said:
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Click to expand...
Click to collapse
Wants to revert to stock rom
Plz help
Just download this file: https://mega.nz/#!PBEWiTYT!s9IaGIBLziIhgwJzqkmrFa5fFYE95RsGh4rxKa7cCwE
and flash it via twrp recovery.
Edwin Hamal said:
Just download this file: https://mega.nz/#!PBEWiTYT!s9IaGIBLziIhgwJzqkmrFa5fFYE95RsGh4rxKa7cCwE
and flash it via twrp recovery.
Click to expand...
Click to collapse
Thanks ,a lot but how to install twrp when iam stucked in a bootloop
agriculture said:
Thanks ,a lot but how to install twrp when iam stucked in a bootloop
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2764408 This will help you and also have you installed adb and fastboot in your pc? If not first install it.
Also don't forget to install the drivers as well.
T2 ultra dual cant turn on and cant charge
T2 ultra dual tried to charge it in a wall charger and tried it in usb connected to desktop charge but it only shows me a blinking red notification light.
i tried to turn it on but it wont. i tried to hard reset it with power button + volume up but nothing happen
Happened the same with me
So here's what I did
Use a branded data cable
And a 2amps output charger
Connect both
And connect it to your t2
Turn on the power of charger
As soon you see sony logo turn on the t2 normally
If it doesn't show sony logo,then disconnect everything and reconnect and repeat the procedure until it shows the sony logo
And don't let the battery go below 5 percent
Keep it to charge if battery is below 5 or 3
So yo won't have to do the 3 minutes procedure once again
And yeah..use a stable base..don't let the charging pin or mobile move during this process
For the question asked by narendra17
or just get ur charging slot replaced
First things first, NEVER RESTORE A TWRP BACKUP YOU CREATED IN ONE VERSION IN ANOTHER VERSION.
Now coming to my situation, I installed the Deodexed Stable Zui Oreo ROM but as usual got bored with the zui and wanted to go back to my fav Pixel experience Rom so I clean flashed it from the unofficial hendibudi recovery but I couldn't use my internal storage and I once earlier read in another thread that installing 3.0.3 decrypts it so I installed that recovery and clean flashed AEX5.2 Rom this time and same internal storage problem continued so my lazy ass thought I'll restore the TWRP backup I created when I unlocked the bootloader instead of flashing through qfil and that was my mistake.
I created the backup on 3.1.0 but now I was on 3.0.3 so as soon as I restored the backup and rebooted, my phone didn't turn on, no zuk logo or led or anything, if I long press the power button it just vibrates and the led flashes for a sec, that's all.
Edit: feels like this thread belongs to the News/Discussions section than here but meh
Edit2: Solution in Post #4
It seems like qfil, mi flash method is last as your bootloader is also corrupted, and this happens because there are many critical hidden partition on our device so it mess up, when you install first twrp releases, you will notice there are 7 8 partition and in latest one they all are hidden.
narshi shukla said:
It seems like qfil, mi flash method is last as your bootloader is also corrupted, and this happens because there are many critical hidden partition on our device so it mess up, when you install first twrp releases, you will notice there are 7 8 partition and in latest one they all are hidden.
Click to expand...
Click to collapse
well if it's that easy I wouldn't be worried at all but unfortunately my situation is a bit different, I can't flash anything as my phone is recognized as 900E, to flash anything the phone should be recognized in 9008(edl) mode and for that I have to strip the cable and short circuit with it and all that, which is really a hit or miss kinda situation so kinda worried!
But seems like I have no other choice so let's see what happens, I tried stripping the stock usb cable and it got split into half lmao
now I'll buy another cable and will try the copper wire method instead of splitting it
Edit: yeah ik that different versions of TWRP are different but I wanted to restore only the data partition and my data was already encrypted so I thought I have nothing to lose, I was like if it doesn't work I'll flash the full firmware again but didn't expect it to fully brick the phone
Okay the primary reason for me creating this thread was to let y'all know how I bricked my device so that y'all won't repeat my mistake but I saw some people here and there recently asking how to resurrect their device so thought I'll share how I got mine working wishing it'll help such people.
My phone was completely dead, the hardware buttons weren't doing anything, the phone doesn't power off but all I could see was a black screen, so I had to follow THIS GUIDE.
But the above situation is a rarity, I guess most of you ppl could get to the zuk logo or your led keeps flashing and you can use your hardware buttons, in such situations, follow THIS GUIDE.
The above links are for you to get your phone to 9008 mode to be able to flash the stock firmware, but if you don't know how to flash,
refer THIS GUIDE.
Flashing problem
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".
seetharam55555 said:
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".
Click to expand...
Click to collapse
Only one solution is there.. after u get sahara error.. disconnect your phone and cable, then again turn your phone on. And then turn it off... After that press volume up+ power button simultaneously while connecting to the usb port, if you are successful, within 2-3 seconds you have to press the download button on QFIL.. then it should work... You can try 2-3 times... For demo, but thia is the only way out of this hard brick
.. i suffered in the sahara error for 3 days since i flashed OOS on my z2 , till today i finally got the solution
sidS6 said:
Only one solution is there.. after u get sahara error.. disconnect your phone and cable, then again turn your phone on. And then turn it off... After that press volume up+ power button simultaneously while connecting to the usb port, if you are successful, within 2-3 seconds you have to press the download button on QFIL.. then it should work... You can try 2-3 times... For demo, but thia is the only way out of this hard brick
.. i suffered in the sahara error for 3 days since i flashed OOS on my z2 , till today i finally got the solution
Click to expand...
Click to collapse
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.
seetharam55555 said:
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.
Click to expand...
Click to collapse
Not 2 minutes but i think 30 seconds at max.. and by successful i mean that you get into Qualcomm 9008 qdloader mode in qfil
---------- Post added at 05:13 PM ---------- Previous post was at 05:11 PM ----------
The main thing is you have to immediately press the download button(within 2-3 seconds) after reconnecting into 9008 mode
Briked my phone flasing oos, solved it in the first go usimg qpst method.
Rahil4321 said:
Briked my phone flasing oos, solved it in the first go usimg qpst method.
Click to expand...
Click to collapse
You didn't got Sahara error?
seetharam55555 said:
thanks for response.What do u mean by "succesfull".and other thing to turn off the phone it takes me nearly 2 min constant pressing of power button, is this normal.
Click to expand...
Click to collapse
Were u able to unbrick?
Thanks
sidS6 said:
Were u able to unbrick?
Click to expand...
Click to collapse
yes it worked but as u said we have to hit download button within 2 sec....thank you very much u nearly saved 1000 rupees for me.
seetharam55555 said:
yes it worked but as u said we have to hit download button within 2 sec....thank you very much u nearly saved 1000 rupees for me.
Click to expand...
Click to collapse
Congrats bro! But i lost my 3 cables in ths process.. that equals 700 rs.. but i learned a great lesson? no probs
seetharam55555 said:
i got phone into 9008 port following ur guide and installed qfil everything went good problem is after hitting download buton in qfil after some time it says error "sahara failed".
Click to expand...
Click to collapse
dude just cut the cable and make intersection betwwen vlack and gree wire and put the cable into phone , got edl mode simple ways
sidS6 said:
Congrats bro! But i lost my 3 cables in ths process.. that equals 700 rs.. but i learned a great lesson? no probs
Click to expand...
Click to collapse
Why did you wasted 3 cables for?
seetharam55555 said:
Why did you wasted 3 cables for?
Click to expand...
Click to collapse
Coz while spliiting, one got split into half ? and the other one got bent so it was unusable.. i had buy the third one
sidS6 said:
Coz while spliiting, one got split into half ? and the other one got bent so it was unusable.. i had buy the third one
Click to expand...
Click to collapse
Ohh you tried that method i did like this
sidS6 said:
You didn't got Sahara error?
Click to expand...
Click to collapse
You don't need to flash via qpst when you see logo but device wont boot it mean you locked your bootloader so all you need to do is unlock it again that's all
Nirmal0001 said:
You don't need to flash via qpst when you see logo but device wont boot it mean you locked your bootloader so all you need to do is unlock it again that's all
Click to expand...
Click to collapse
Unfortunately learnt this after unbricking my device
I had installed RR mix rom in my Zuk Z2 plus. while trying to enter fastboot mode, it went off. Now it is completely dead. not being recoganized in my PC.In device manager it is not shown. Tried to deep flash through Qfil, but didn't recoganize port.If i plug in charger also no LED indication, If I disconnect battery & plug in for charging, white LED slowly blinks, in the same mode if I connect charger blinking white LED continues. But once I remove charge & reconnect it shows nothing. again if I remove battery & reconnect, again white LED starts blinking. Apart from this nothing is shown, phone completely dead. Can anybody help please. I tried through Qfil, tried by shorting black & green cable, all types of key combinations.