few days ago i tried to flash a new kernal to phone and after flashing the kernal i tried to switch on my device it didnt respond just vibrated and went blank , i tried again to switch on bt it only showed red led light.
Current situtation : phone dead , showing no sign of life
My phone has unlocked bootloader and is rooted .
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
3. tried to connect it to pc bt pc doesnt detect it..
i need help people Please help me
Thank you
axatjpr said:
few days ago i tried to flash a new kernal to phone and after flashing the kernal i tried to switch on my device it didnt respond just vibrated and went blank , i tried again to switch on bt it only showed red led light.
Current situtation : phone dead , showing no sign of life
My phone has unlocked bootloader and is rooted .
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
3. tried to connect it to pc bt pc doesnt detect it..
i need help people Please help me
Thank you
Click to expand...
Click to collapse
check through adb if the phone is getting connected or not.
if not then try booting it into fastboot mode or recovery mode.
all the best :good:
hi
axatjpr said:
few days ago i tried to flash a new kernal to phone and after flashing the kernal i tried to switch on my device it didnt respond just vibrated and went blank , i tried again to switch on bt it only showed red led light.
Current situtation : phone dead , showing no sign of life
My phone has unlocked bootloader and is rooted .
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
3. tried to connect it to pc bt pc doesnt detect it..
i need help people Please help me
Thank you
Click to expand...
Click to collapse
i can repair it ... contact me on gtalk [email protected]
KingWickedd said:
check through adb if the phone is getting connected or not.
if not then try booting it into fastboot mode or recovery mode.
all the best :good:
Click to expand...
Click to collapse
i tried using the adb method bt nothin happened. also fastboot mode not working , i tried to enter it bt it doesnt respond
axatjpr said:
i tried using the adb method bt nothin happened. also fastboot mode not working , i tried to enter it bt it doesnt respond
Click to expand...
Click to collapse
Open flashtool
plug device in flashmode
flash stock ftf
done
ManthanRB said:
Open flashtool
plug device in flashmode
flash stock ftf
done
Click to expand...
Click to collapse
nothing is working , it doesnt respond to anything
only responds when i press power key , it shows red light blinking..
anyone other solution?
that means your battery is dead, leave it on the charger overnight ...
Sent from my Nexus 5 using Tapatalk
axatjpr said:
Things i have tried : i thought battery was dead so i tried to use the charger bt i didnt respond , used usb method (it also didnt worked) , then i brought some battery charging device and charged the battery using it.
2. nothing still works , it same situtation as before even after charging the battery. :crying:
Thank you
Click to expand...
Click to collapse
If after charging the battery, LED still blinks red than may be your battery is dead.
try changing the battery.
also try connecting the phone in flashmode
- keep pressing the back button & while holding the back button connect the usb cable.
if green LED is on than your phone is still good.
Report back!
ManthanRB said:
If after charging the battery, LED still blinks red than may be your battery is dead.
try changing the battery.
also try connecting the phone in flashmode
- keep pressing the back button & while holding the back button connect the usb cable.
if green LED is on than your phone is still good.
Report back!
Click to expand...
Click to collapse
no good .. :/
nothing is working .. anything else u got?
No vibration also?
ManthanRB said:
No vibration also?
Click to expand...
Click to collapse
nope nothing..
its dead.. :/
anything else i could do ?
axatjpr said:
nope nothing..
its dead.. :/
anything else i could do ?
Click to expand...
Click to collapse
You said it was giving vibration before & now nothing, did you tried another fully working & charged battery?
ManthanRB said:
You said it was giving vibration before & now nothing, did you tried another fully working & charged battery?
Click to expand...
Click to collapse
nope i didnt , i will try again today then tell u what happens
btw some other guy told me that phone's hwconfig and semcboot are damaged .
i got no idae abt that..
axatjpr said:
nope i didnt , i will try again today then tell u what happens
btw some other guy told me that phone's hwconfig and semcboot are damaged .
i got no idae abt that..
Click to expand...
Click to collapse
You first try the battery method.
problem solved
ManthanRB said:
You first try the battery method.
Click to expand...
Click to collapse
gave phone to some guy and he repaired the phone for 1500 rupee.. he said he rewrote the software .. something something.. and used credits to repair my phone.. So its working fine now.. just facing the battery issue.. so i guess will replace the battery soon.
Related
My defy is dead....
No turn on, no bootloader,.... no turn on the screen.
No function Power + Vol+. No function power + vol-.
LED does not light with or without usb.
Only when I conect to PC and I turn ON, in my pc sounds like when you connect a device, but returns to sound like when you disconnect a device.
I tried leaving it overnight without the battery and nothing ...
The RSD Lite not have time to connect it switches itself off
Help please...
battery dead?
lanfearxt said:
battery dead?
Click to expand...
Click to collapse
i think that no because my pc sounds when turn on, but off again at 2 seconds
What have you done to cause this?
Sent from my Blade using XDA Premium App
Hi all
May be downgrade sbf version ?
Sent from my MB525 using XDA App
yesterday suddenly turned off when the battery is almost full ...
Hmm you should try connecting the phone to pc and then press the "Power" button right after connecting it,see if you get the LED in front of the phone to bright White,if then then use RSD to reflash firmware.
Goodluck.
i think you shoud charge your defy firstly
xtrmshadow said:
Hmm you should try connecting the phone to pc and then press the "Power" button right after connecting it,see if you get the LED in front of the phone to bright White,if then then use RSD to reflash firmware.
Goodluck.
Click to expand...
Click to collapse
The LED not turn on...
zjfgavin said:
i think you shoud charge your defy firstly
Click to expand...
Click to collapse
No charge any any any...
likely is dead battery, or else you have some other sbf that screws up your display. trying flashing it with another sbf file and see?
i had the same problem before
Okk, Im buyed a new battery, Monday arrives....
It's most likely your battery is deaded. But if not,your phone might damaged.
You can charge your battery alone by other charger, and then setup the battery
to see whether it work.
did you try flashing the phone again?? in RDS lite, can the computer detect your phone? if not, then it's dead battery, and you can actually use the macgyver method to 'revive' your phone and flash it.
try reading this link
http://forum.xda-developers.com/showthread.php?t=892026
lanfearxt said:
did you try flashing the phone again?? in RDS lite, can the computer detect your phone? if not, then it's dead battery, and you can actually use the macgyver method to 'revive' your phone and flash it.
try reading this link
http://forum.xda-developers.com/showthread.php?t=892026
Click to expand...
Click to collapse
I go to try this !!!
thanks man !!!!
Not work...
vv
what do you mean not work? what sbf did you use to flash with?? it's definitely gonna be better if you can flash a full working sbf instead of a fixed sbf (cos it wont revive your phone)
if your battery is dead, then the macgyver method definitely will work, unless you have a dead battery AND also a non working sbf that is screwing up your display
not a problem of the battery.
A problem of the phone, when connected to pc recognizes it, but 3 seconds off
Now RSD Lite detect this:
http://img703.imageshack.us/i/capturaxl.png/
And when i try to flash any .sbf, boot only, official .sbf appears this:
http://img854.imageshack.us/i/23479963.png/
Any idea ???
try 2.2.1 rom stock ?
Hi,
I have a OneX and yesterday totally bricked.
Maximus 4.1.1 JB, Unlocked Bootloader via htc developers and the phone is can't power on.
Befor this problem, i have other problems with charging and wifi.
Yesterday, the wifi is not turning on. Ok, restart. F*ck this s**it Bootloop. OK, stay calm, try to wipe data. Ok, the phone is booting after wipe data. "Change your language", ok, it set and click next. Here is the problem. Ok i lock the screen and lock off. I can't lock off the srceen. Ok, reboot with long pressed power button. The phone thence not booting and not chargeing,
Anyone knows what's the problem?
I can solve this problem or go to gsm service?
solution
I suggest you to pick you're self up,calm down,and slowly update you're HOX onto the lattest and grattes maximus v 6.o.
Before that,make sure that you're phone is fully charged,back up you're old/current rom and continue.
Don't panic,don't *itch and *oon,it's just a ****ing phone
demirisdemir said:
I suggest you to pick you're self up,calm down,and slowly update you're HOX onto the lattest and grattes maximus v 6.o.
Before that,make sure that you're phone is fully charged,back up you're old/current rom and continue.
Don't panic,don't *itch and *oon,it's just a ****ing phone
Click to expand...
Click to collapse
Thanks your letters, and the help, but the phone does not turn on :S
Turn it completely off and let it charge on the wall for a complete day^^ After that please STUDY THE INSTALL GUIDE OF YOUR CHOOSEN ROM PRECISELY AND READ IT AT LEAST 10 TIMES, this is very important. Now you're ready to flash a ROM. If it's still not wokring, you could've a serious problem with your One X. To have a working warranty claim you have to relock your bootloader!!
nitrous² said:
Turn it completely off and let it charge on the wall for a complete day^^ After that please STUDY THE INSTALL GUIDE OF YOUR CHOOSEN ROM PRECISELY AND READ IT AT LEAST 10 TIMES, this is very important. Now you're ready to flash a ROM. If it's still not wokring, you could've a serious problem with your One X. To have a working warranty claim you have to relock your bootloader!!
Click to expand...
Click to collapse
Hm... If i try to charge for a complete day, the phone turning on?
Read my first post... The phone is no charging. No charging from the wall and no charging from USB.
(Sooooorry my bad engilsh :S)
WinnerB0Y said:
Hm... If i try to charge for a complete day, the phone turning on?
Read my first post... The phone is no charging. No charging from the wall and no charging from USB.
(Sooooorry my bad engilsh :S)
Click to expand...
Click to collapse
I've read your first post. You won't see it if it's carging. Try the following; plug your phone to the wall charger for a couple hours and then try to turn it on. If it doesn't turn on, well, thats bad I remember there were some fixes for not charging ONE X's. I'll have a search if charging doesn't work for you.
nitrous² said:
I've read your first post. You won't see it if it's carging. Try the following; plug your phone to the wall charger for a couple hours and then try to turn it on. If it doesn't turn on, well, thats bad I remember there were some fixes for not charging ONE X's. I'll have a search if charging doesn't work for you.
Click to expand...
Click to collapse
Ok. I plugged in the charger isntant to the wall. Really, i won't see the charging led. But i stay on charger a couple of hours. If it doesn't work. It's soooo bad... Motherborad change...
allen175 said:
I had this problem the other day, the battery died before i went to bed, so i plugged it in over night and nothing happened, thought it was the charger, tried a different htc charger and nothing again. So i plugged it into my computer and a few minutes later the light started to flash. I let it flash for a few minutes and unplugged it from the computer and plugged it into a charger and turned it on and it charged up.
Long story short, plug it into your computer for a while then turn it on and charge it normally.
Click to expand...
Click to collapse
hutzdani said:
Happened to me also but when running bricked kernel.
If your not running the stock kernel you need to put the phone on the charger and just wait untill the red led starts to blink ( it can take 5mins for this to happen )
Then allow it to blink for a few mins then power on as normal and remove the charger.
It will boot and moan it has no charge so plug the charger back in once its booted fully, then leave it to charge.
once at 100% reboot and bam your back up and running as normal.
Click to expand...
Click to collapse
Here are some people facing the same problem as you do.
There is a file (script) that can override those stuff,it is meant for fastboot (usb) mode,and on adb you type the commands and the phone starts to charge (slowly) but it is getting the electricity.
Search the threads,and find it,I'm 99% possitive that you're phone is not fully bricked.
Best of luck
So lets give the guy some proper help. Tell me exactly where you are now ? Is the phone charged ? If you have enough power to boot in recovery ? It will charge within recovery so you can leave the phone on and in recovery !
Download a ics rom (like viper x) see if that works oke !
put the phone in fastboot USB mode
Bootloader unlocked - if yes continue
Flash the cwm recovery 5.8.4.0
Fastboot flash recovery recoveryname.img
Go into recovery and do a full wipe of everything. (Factory reset and wipe all caches)
Go to mounts & storage and mount as USB diskdrive
Copy the rom.zip to the phone sd card
Open the rom.zip and copy the boot.img to the fastbootfolder on pc
Put the phone back in fastboot USB mode
Fastboot flash boot boot.img
Fastboot erase cache
Boot back into recovery and flash the rom
After that reboot the phone and it should boot up !
Ahh...
Lesson, this phone IS NOT TURNING ON!
And... unfortunately despite charged few hour... The phone still bricked and i can't turn it on :S
WinnerB0Y said:
Ahh...
Lesson, this phone IS NOT TURNING ON!
And... unfortunately despite charged few hour... The phone still bricked and i can't turn it on :S
Click to expand...
Click to collapse
What you can try is to plug it into a pc .... i saw a post before that someone did that and that he could turn on the phone a few hours later. It's worth the try right !
MarcelHofs said:
What you can try is to plug it into a pc .... i saw a post before that someone did that and that he could turn on the phone a few hours later. It's worth the try right !
Click to expand...
Click to collapse
Thanks, i try it and i write later.
Not working :S
My PC is detecting only the APX hardware. And my phone keep dead.
It's rather hardware issue. Service maybe?
1x, xda premium hd
Apx hardware? I think your memory is corrupt.
Try plugging your phone into charger overnight, then into pc for charge and hold the Vol dwn + pwr for 15 seconds, if the phone doest turn on then you have dead hardware. You can go back to HTC and tell them it stopped working overnight ;D
The good thing in a bricked phone they can't find out whether your bootloader is unlocked or not.
However, some developers are interested in APX mode(because its not accessible in a working phone) and I THINK you can use nvflash (i have no idea how its used or whats its functions are)
APX Mode is when the phone detects very serious hardware damage. In short, you're ****ed.
XxVcVxX said:
APX Mode is when the phone detects very serious hardware damage. In short, you're ****ed.
Click to expand...
Click to collapse
What can I do?
Specifically, what kind of serious hadware damage?
WinnerB0Y said:
What can I do?
Specifically, what kind of serious hadware damage?
Click to expand...
Click to collapse
Go back to the store
MarcelHofs said:
Go back to the store
Click to expand...
Click to collapse
Khm.... I want to go, but, i bought the phone used...
Hello guys.
My Sony Xperia S got Hard bricked after i tried to partition my SDcard from TWRP recovery which unfortunately failed due to some reason.....
I had boot manager installed for dual boot and i had sony stock firmware 6.1.A.2.55 on the native and CM10 on loop ...
The partition was tried in TWRP for loop in Ext4 format
My Xperia S now does not respond to fastboot buttons as well as all other combinations ...
It doesnt light any LED not even while its connected to the charger..
The only thing that happens is when i connect it using USB cable without any combinations and the computer detects it as SEMC flash device..
Is there any method to flash using this mode?
I have tried every method on all the forums.(flashtool,fastboot,taking battery out ,power+vol up,everything )
Guys please i need serios help any experienced suggesions would be helpful ...
Please help :crying:
PS: i had never thought that trying to partition the SDcard would brick my phone..
Did you leave your phone connected to wall charger? How many hours you leave it? Mine SONY logo appear in 8 hours. Try it. It may help. Leave your phone connected yo wall charger for sometime.
Sent from my Xperia ion using xda app-developers app
pharix said:
Did you leave your phone connected to wall charger? How many hours you leave it? Mine SONY logo appear in 8 hours. Try it. It may help. Leave your phone connected yo wall charger for sometime.
Sent from my Xperia ion using xda app-developers app
Click to expand...
Click to collapse
Okay ill try that for sure and let u know
Wow i don't know how ...but just as i connected it to the charger the orange LED shows up .....But there is no sony logo anyway ...lets wait
nope nothing happened except the LED that glows :crying:
How the duck did you take your battery out? It has an INBUILT one, why would you take apart the entire phone?
Then, after telling you how stupidly you did that;
can you go back into the recovery? (probably yes, but it's weird)
Did you ACTUALLY take apart the phone to take the battery out? (probably not)
Do you have an unlocked bootloader? (i think you do, but not sure...)
Do you still have warranty? (probably yes)
Try again, because if the orange LED showed up, it's probably not too late...
Now go and use FlashTool once more...
someone755 said:
How the duck did you take your battery out? It has an INBUILT one, why would you take apart the entire phone?
Then, after telling you how stupidly you did that;
can you go back into the recovery? (probably yes, but it's weird)
Did you ACTUALLY take apart the phone to take the battery out? (probably not)
Do you have an unlocked bootloader? (i think you do, but not sure...)
Do you still have warranty? (probably yes)
Try again, because if the orange LED showed up, it's probably not too late...
Now go and use FlashTool once more...
Click to expand...
Click to collapse
yes i took the phone apart took the battery out ...waited long enough for the capacitors to discharge and then again put it in...
no i can't get back into the recovery ...i can't even boot the phone and no combination is working
yes i have an unlocked bootloader
no on't have the warranty..
The orange LED glows up while charging only
the phone does not go to fastboot or any other mode so i can't use flash tool
the only thing that comes on the computer when i plug the USB is "SEMC flash device" ....which non of the tools recognise
Guys please ...is there anyone out there who can help me? :crying:
I do believe you DID have warranty up until the moment you took apart the phone (I think the repair service guys would fix your phone without chacking for a locked BL...)
someone755 said:
I do believe you DID have warranty up until the moment you took apart the phone (I think the repair service guys would fix your phone without chacking for a locked BL...)
Click to expand...
Click to collapse
They wont know you took it apart. There is no tamper protection.
mrsatan said:
They wont know you took it apart. There is no tamper protection.
Click to expand...
Click to collapse
Exactly they dont have any protection against that.....and i dont think any phones with an inbuilt battery would have such protection....
Hi mate, try some tips that some members gave me on my topic...
I don't know if those tips will work for you, but maybe yes! ^^
My phone stills bricked, but maybe work in your case!
Thread link: http://forum.xda-developers.com/showthread.php?t=1968735
Carcass.br said:
Hi mate, try some tips that some members gave me on my topic...
I don't know if those tips will work for you, but maybe yes! ^^
My phone stills bricked, but maybe work in your case!
Thread link: http://forum.xda-developers.com/showthread.php?t=1968735
Click to expand...
Click to collapse
Thanx mate for ur reply ...but unfortunately i have tried all those methods , none of them seems to work for me either
PhoenixDD said:
Thanx mate for ur reply ...but unfortunately i have tried all those methods , none of them seems to work for me either
Click to expand...
Click to collapse
I'm starting to think that my case could be a corrupted bootloader, where I have to use JTag to try to save, but I don't know anyone who have a JTag, neither in my country.
I don't know what could be, but I still entering in flashmode or fastboot and my PC recognize my phone with testpoint, so I think that maybe is not a hardware problem...
Carcass.br said:
I'm starting to think that my case could be a corrupted bootloader, where I have to use JTag to try to save, but I don't know anyone who have a JTag, neither in my country.
I don't know what could be, but I still entering in flashmode or fastboot and my PC recognize my phone with testpoint, so I think that maybe is not a hardware problem...
Click to expand...
Click to collapse
Even i think i might have to do that ...u r stil very lucky to be able to get into fastboot and flashmode....i can't get into those too...
The only 1 option i haven't tried is using testpoints .....ill try that out after i get all the tools required
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
I had just successfully rooted my xperia play r800i and was installing CWM. After the installation was successful, I unplugged the phone as Flashtools said but it won't start. Now it's not even being detected by Flashtools. It is being detected by my laptop only with the beep sound and nothing else.
Also my battery was around 20% while I was flashing so maybe that had something to do with it.
Waiting for help by a generous XDA member, again.
Thanks in advance!
AkifMehmood said:
I had just successfully rooted my xperia play r800i and was installing CWM. After the installation was successful, I unplugged the phone as Flashtools said but it won't start. Now it's not even being detected by Flashtools. It is being detected by my laptop only with the beep sound and nothing else.
Also my battery was around 20% while I was flashing so maybe that had something to do with it.
Waiting for help by a generous XDA member, again.
Thanks in advance!
Click to expand...
Click to collapse
Flash stock rom again
If ur phone doesn't have charge , charge it for one hour then flash stock rom
Sent from my R800i using xda premium
raminta said:
Flash stock rom again
If ur phone doesn't have charge , charge it for one hour then flash stock rom
Sent from my R800i using xda premium
Click to expand...
Click to collapse
I charged it for about 2 hours not flashtools wont detect it when I try to hold the back button while inserting the USB cable
AkifMehmood said:
I charged it for about 2 hours not flashtools wont detect it when I try to hold the back button while inserting the USB cable
Click to expand...
Click to collapse
if u have unlocked bootloader try to change ur kernel
and reinstall drives of ur phone maybe it can solve the problem that flashtools doesnt detect ur phone
raminta said:
if u have unlocked bootloader try to change ur kernel
and reinstall drives of ur phone maybe it can solve the problem that flashtools doesnt detect ur phone
Click to expand...
Click to collapse
But the screen is not even turning on. It's not responding to holding the back and power button
AkifMehmood said:
But the screen is not even turning on. It's not responding to holding the back and power button
Click to expand...
Click to collapse
Do you have working fastboot pull battery insert and then hold search key while plugin usb cable to computer if the led turns blue then you can flash another kernel !!
nakuk21 said:
Do you have working fastboot pull battery insert and then hold search key while plugin usb cable to computer if the led turns blue then you can flash another kernel !!
Click to expand...
Click to collapse
I tried but its not giving the blue led
My z2+ firstly bricked then i tried to flah via qfil .
Everything was going right but suddenly during the downloading process qfil has error and phone got disconnected. Then i tried everything to go to edl mode again but not able to do that.
Now phone has nothing even there is no zui logo appers.
Tried charging but it vibrated flashed the led light every 10 sec and there is no detect in the pc for this device now.
What to do?
Shubham_rbt said:
My z2+ firstly bricked then i tried to flah via qfil .
Everything was going right but suddenly during the downloading process qfil has error and phone got disconnected. Then i tried everything to go to edl mode again but not able to do that.
Now phone has nothing even there is no zui logo appers.
Tried charging but it vibrated flashed the led light every 10 sec and there is no detect in the pc for this device now.
What to do?
Click to expand...
Click to collapse
Try that Short circuit cable trick.
0
gt20 said:
Try that Short circuit cable trick.
Click to expand...
Click to collapse
Done Nothing happened
the port not detected 1ng7z3o3tkWChzOtbFAjNyzMY02Q5Vx0H (google drive screen shot of qfil)
try removing battery or drain battery to zero and try again the button combination
miju12 said:
try removing battery or drain battery to zero and try again the button combination
Click to expand...
Click to collapse
I Just Put a Rubber bend and a way that it is holding the power button but it is taken already 4+ hrs but still battery is there in the device
0
miju12 said:
try removing battery or drain battery to zero and try again the button combination
Click to expand...
Click to collapse
I am Trying to drain the battery using the rubber band holding the power button.
but it taken 4+hrs already but still not fully drain the battery.
To add the Download process on QFIL was more than 50% when there was error.
Shubham_rbt said:
I am Trying to drain the battery using the rubber band holding the power button.
but it taken 4+hrs already but still not fully drain the battery.
To add the Download process on QFIL was more than 50% when there was error.
Click to expand...
Click to collapse
you have to be patient while doing these things
miju12 said:
you have to be patient while doing these things
Click to expand...
Click to collapse
now the thing is that its fully drain but even tried charging/connecting to pc no detection found.
Even there is no zui logo even if i charged it again for 1 hr.
even in normal case the device is not being recognised by pc there is nothing indicated by pc that something has been plugged in.
(to add pc ports are working fine,usb c type is also fine only problem with device)
has been fully discharged again what to do now.
Try deep flash by using some kind of deep flash cable,it worked for me:victory:
Arun teja said:
Try deep flash by using some kind of deep flash cable,it worked for me:victory:
Click to expand...
Click to collapse
Finally finally the phone is now set
i donut know what happened a miracle happened and i was just playing like everytime ( everyday i used to take 15-30 mins) to get if my phone is getting recognised by pc ... suddenly phone gets recognised when i was giving up fot the day.. then i tried but there was an error ..
now i dont give up and tried 50 times...
it got yehhh!!!
Need Help!
Shubham_rbt said:
Finally finally the phone is now set
i donut know what happened a miracle happened and i was just playing like everytime ( everyday i used to take 15-30 mins) to get if my phone is getting recognised by pc ... suddenly phone gets recognised when i was giving up fot the day.. then i tried but there was an error ..
now i dont give up and tried 50 times...
it got yehhh!!!
Click to expand...
Click to collapse
i too got into same situation. Can you please help me with this weird situation? Device got disconnected while flashing via qfil. Now no zuk logo nothing. Phone vibrates every 30 sec that's it. Wont even gets recognized by my laptop(no 9008 or 900e port!)
Shubham_rbt said:
now the thing is that its fully drain but even tried charging/connecting to pc no detection found.
Even there is no zui logo even if i charged it again for 1 hr.
even in normal case the device is not being recognised by pc there is nothing indicated by pc that something has been plugged in.
(to add pc ports are working fine,usb c type is also fine only problem with device)
has been fully discharged again what to do now.
Click to expand...
Click to collapse
Try the short circuit trick while battery is discharged or zero, although it is quite difficult to confirm so when the phone's dead