I have a Xperia m dual c2004 which was bricked while i flashed root kernel. The flashing process failed due to insufficient drivers. Now my phone won't boot, enter flash mode or fastboot.
:crying: :crying: :crying: :crying:
When i tried to power on the phone the red LED blinks three times and the phone just turn off
Please help me with this issue.!!
amalantony said:
I have a Xperia m dual c2004 which was bricked while i flashed root kernel. The flashing process failed due to insufficient drivers. Now my phone won't boot, enter flash mode or fastboot.
:crying: :crying: :crying: :crying:
When i tried to power on the phone the red LED blinks three times and the phone just turn off
Please help me with this issue.!!
Click to expand...
Click to collapse
Flash stock rom once
simmusss said:
Flash stock rom once
Click to expand...
Click to collapse
it won't enter fastboot or flashmode. So its unable
Have you tried charging your phone yet?
Your battery is empty... So remove your battery.charge it by some external chargers...may be try with another battery of your friends Xperia M if any...
Because with a broken kernel it will take more time even days to charge enough to take the mobile to fastboot or flashmode.
nageswarswain said:
Your battery is empty... So remove your battery.charge it by some external chargers...may be try with another battery of your friends Xperia M if any...
Because with a broken kernel it will take more time even days to charge enough to take the mobile to fastboot or flashmode.
Click to expand...
Click to collapse
OK, will try that.
amalantony said:
I have a Xperia m dual c2004 which was bricked while i flashed root kernel. The flashing process failed due to insufficient drivers. Now my phone won't boot, enter flash mode or fastboot.
:crying: :crying: :crying: :crying:
When i tried to power on the phone the red LED blinks three times and the phone just turn off
Please help me with this issue.!!
Click to expand...
Click to collapse
looks like your phone run out of battery
Related
I am not able to put my xperia m in flashmode using the flashtool. I tried turning off phone and then holding volume down and inserting the USB cable but nothing happens, there is no led flashing when i do that. Also my phone is not charging while connected to pc when its turned off.
I have every driver installed and i am using the lastest version of flashtool.
Dude you need to hold Vol + button to enter in fastboot.
I have tried both volume up and vol down nothing happens.
Zexter21 said:
I have tried both volume up and vol down nothing happens.
Click to expand...
Click to collapse
Does your phone charge through your charger when it is switched off?
when you connect your phone to pc in normal mode then does it detects??
No my phone doesn't charge with the charger when its turned off. And my pc detects my phone when connected normally.
tabun1994 said:
Does your phone charge through your charger when it is switched off?
Click to expand...
Click to collapse
i have bricked my phone as well.. yes it turns blue after pushing and holding +volume up and it does charge through charger when it is switched off... How do i unbrick my phone if its a semi-brick??
Susheel_22 said:
i have bricked my phone as well.. yes it turns blue after pushing and holding +volume up and it does charge through charger when it is switched off... How do i unbrick my phone if its a semi-brick??
Click to expand...
Click to collapse
If it's a soft brick, you can repair from PCC or flash using flashtool.
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Susheel_22 said:
i have bricked my phone as well.. yes it turns blue after pushing and holding +volume up and it does charge through charger when it is switched off... How do i unbrick my phone if its a semi-brick??
Click to expand...
Click to collapse
hard brick means ur phone will not even show a blink and led wont work even in fastboot..
u r having a soft-brick...means u have done something in system folder..
anyway to get phone to work...
download a .ftf of ur latest firmware of ur device[c1904/c1905/c2004/c2005 i think u know urs..] and flashtool...
use flashtool and flash the ftf...
u can see the firmware in xperia m android development...
for flashtool https://unrestrict.li/flashtool
guide here:
http://forum.xda-developers.com/showthread.php?t=2054486
So i have bricked my phone as well? How i am supposed to unbrick it with flashtool. As i already said the problem in the topic, nothing happens while holding vol + and inserting cable.
Zexter21 said:
So i have bricked my phone as well? How i am supposed to unbrick it with flashtool. As i already said the problem in the topic, nothing happens while holding vol + and inserting cable.
Click to expand...
Click to collapse
It must be a hard-brick bro.. You should take it to the repair center..
Zexter21 said:
So i have bricked my phone as well? How i am supposed to unbrick it with flashtool. As i already said the problem in the topic, nothing happens while holding vol + and inserting cable.
Click to expand...
Click to collapse
Lets just analyze your problem:
You launched flashtool and started a flash session.And then a window appeared in flashtool saying that you have to connect your phone in flashmode. You pressed Volume+ and connected your phone.
I want to know what happened next,
Did the window telling you to connect the device in flashmode close down automatically?
Was a pop-pup shown in your pc telling you to choose your phone model?
If these didnt happen, what else did?
I can help you certainly if you can answer these questions.
How do i unbrick my phone? I can't take it to center because i have rooted and unlocked bootloader.
Zexter21 said:
How do i unbrick my phone? I can't take it to center because i have rooted and unlocked bootloader.
Click to expand...
Click to collapse
If it's a hard brick we can do nothing about it.
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Finally fixed the problem. I just pulled out the battery and left it for a minute then inserted again. Now everything is working fine.
Hi,
I'm having a similar problem, the phone I'm trying to repair doesn't enter on flashmode, only on fastboot mode, and I need to unlock bootloader and I can't because I can't put it on flashmode.... do you have any suggestions?
Regards
having the same problem my phone neither turn on or enter in flashmode
when i connect it to charge or any there source it just showing blue led... initially i was able to flash but every time i got some error now it just not doing anything please help... i m using c1904 xperia m:crying:
ansebovi said:
hard brick means ur phone will not even show a blink and led wont work even in fastboot..
u r having a soft-brick...means u have done something in system folder..
anyway to get phone to work...
download a .ftf of ur latest firmware of ur device[c1904/c1905/c2004/c2005 i think u know urs..] and flashtool...
use flashtool and flash the ftf...
u can see the firmware in xperia m android development...
for flashtool https://unrestrict.li/flashtool
guide here:
http://forum.xda-developers.com/showthread.php?t=2054486
Click to expand...
Click to collapse
having a similar problem.... all the methods suggested above require the phone to be in flashmode. and flashtool shows error while flashing ftf file.... help please.. thank you
i tried to unlock the bootloader......it succeed but resulted in long bootloop and the phone not working....i tried to flash it with its original firmware using sony flashtool but didnt succeed in that coz i flashed a recovery image and resulted in bricking...tried pc companion....failed....it was then booting in fastboot and slashboot....i submitted it to sony service center...they say that the display has crashed...and the motherboard too,,,needs replacement...its now jst blinking red thrice when powered on....
I AM REALLY HELPLESS NOW PLZ SUGGEST SOME COZ I THINK ITS SOFTWARE PART ONLY AND SONY PEOPLE HAVE BEFOOLED ME
HELP HELP HELP
No need to replace motherboard your device is not hard bricked because led is blinking.
Pull the battery and wait for 1 min. insert the battery & connect your mobile to pc in fastboot mode(hold Volume UP button and plug in USB Cable). The device’s LED light should turn into Blue. Flash stock kernel with flashtool or cmd method(flash the kernel for your device Ex. SS or DS - http://forum.xda-developers.com/showthread.php?t=2494793). Then unplug the cable & connect to flash mode flash stock rom :good:
Thnx alot for replying but it is not getting into flashboot and fastboot now after i took it from the service center.....
Its just blinking thrice when i am powering it on....nothing else....
HELP PLEASE..
If I'm correct, the LED blinking in red thrice suggests that the battery is empty and need to be charged. Try that and do @Sureshtuty 's suggestion.
elmkzgirxp said:
If I'm correct, the LED blinking in red thrice suggests that the battery is empty and need to be charged. Try that and do @Sureshtuty 's suggestion.
Click to expand...
Click to collapse
i will try and will surely tell u what happened next...............
kindly remember this thread and help me becAuse the phone is not mine......its my friend's.....so i am even more scared now...
PLEASE HELP
Hey, my accidentally bricked my xperia s and now I'm trying to flash a stock kernel. Now phone is boot looping I can open flashmode without a problem while holding power button and volume down but the problem is that it restarts when flashing. All drivers are installed and device manager says that it's semc flash device. thanks fo any help. log here postimg.org/image/fju7lxrg3/
Just make sure you have sufficiently charged...while its turning on or you see boot animation or Sony logo press n hold power+volume up...then try to enter to flash mode
nageswarswain said:
Just make sure you have sufficiently charged...while its turning on or you see boot animation or Sony logo press n hold power+volume up...then try to enter to flash mode
Click to expand...
Click to collapse
i had removed battery and charged it with an universal charger and i'm entering into flashmode without any problem just that my phone restarts when I start flashing.
Have you unlocked your boot loader
nageswarswain said:
Have you unlocked your boot loader
Click to expand...
Click to collapse
yep i unlocked it. More ideas?
Flash doomlords kernel via fastboot....then reboot to system....if it will not boot successfully then push a ROM zip by adb push and flash it....one more thing just check whether your phone is connecting to PC via fastboot or flashmode.
.
The best way to check is by flashtool...open flashtool software on PC and then connect your phone via fastboot/flashmode and see the status at PC flashtool....if its connecting then flash stock ftf and if not then 1st install drivers..
nageswarswain said:
Flash doomlords kernel via fastboot....then reboot to system....if it will not boot successfully then push a ROM zip by adb push and flash it....one more thing just check whether your phone is connecting to PC via fastboot or flashmode.
.
The best way to check is by flashtool...open flashtool software on PC and then connect your phone via fastboot/flashmode and see the status at PC flashtool....if its connecting then flash stock ftf and if not then 1st install drivers..
Click to expand...
Click to collapse
yep, now i broke my xperia s even more. It can't even boot properly i think now it has a hard brick. No lights, no signs of life but when connected to pc it shows something like QHSUSB_DLOAD, is it possible to fix it at home?
temorinkaari said:
yep, now i broke my xperia s even more. It can't even boot properly i think now it has a hard brick. No lights, no signs of life but when connected to pc it shows something like QHSUSB_DLOAD, is it possible to fix it at home?
Click to expand...
Click to collapse
Is it charging or not?BTW what you have done?
nageswarswain said:
Is it charging or not?BTW what you have done?
Click to expand...
Click to collapse
There was a red light while charging for an hour or so but after a while it disappeared and now im left with dead phone. I don't even know how it happened, i was on cmw recovery and i formatted something, after i restarted my phone it started being like this. I heard that it's possible to repair boot by software called S1tool but i can't find any information about doing this on xperia s.
temorinkaari said:
There was a red light while charging for an hour or so but after a while it disappeared and now im left with dead phone. I don't even know how it happened, i was on cmw recovery and i formatted something, after i restarted my phone it started being like this. I heard that it's possible to repair boot by software called S1tool but i can't find any information about doing this on xperia s.
Click to expand...
Click to collapse
Have you tried to recover it with flashtool
nageswarswain said:
Have you tried to recover it with flashtool
Click to expand...
Click to collapse
I'm not able to boot into flashmode and fastboot mode. I'm telling you that my boot is dead.
temorinkaari said:
I'm not able to boot into flashmode and fastboot mode. I'm telling you that my boot is dead.
Click to expand...
Click to collapse
Then you need some more may be a JTag.....
temorinkaari said:
There was a red light while charging for an hour or so but after a while it disappeared and now im left with dead phone. I don't even know how it happened, i was on cmw recovery and i formatted something, after i restarted my phone it started being like this. I heard that it's possible to repair boot by software called S1tool but i can't find any information about doing this on xperia s.
Click to expand...
Click to collapse
temorinkaari said:
I'm not able to boot into flashmode and fastboot mode. I'm telling you that my boot is dead.
Click to expand...
Click to collapse
As far as I know, it is not possible to wipe partition from CWM (if You selected from one of the options from menu) which would lead to hard brick.
Let us start with basics. Can You tell Me which kernel You flashed to get CWM? Also, is there any vibration when You press and hold power button and volume up key together?
Mirhawk said:
As far as I know, it is not possible to wipe partition from CWM (if You selected from one of the options from menu) which would lead to hard brick.
Let us start with basics. Can You tell Me which kernel You flashed to get CWM? Also, is there any vibration when You press and hold power button and volume up key together?
Click to expand...
Click to collapse
Doomlord kernel and there is no vibration at all.
temorinkaari said:
Doomlord kernel and there is no vibration at all.
Click to expand...
Click to collapse
Can You give Me link of the kernel You used, just to see if it has any problems. Also, for how long did You hold the combination? You need to hold it for at least 10 to 15 seconds.
Mirhawk said:
Can You give Me link of the kernel You used, just to see if it has any problems. Also, for how long did You hold the combination? You need to hold it for at least 10 to 15 seconds.
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=2305591 this one. Yes i know how that combination works, no luck at all, no reaction. I'm still think that my boot is dead.
temorinkaari said:
forum.xda-developers.com/showthread.php?t=2305591 this one. Yes i know how that combination works, no luck at all, no reaction. I'm still think that my boot is dead.
Click to expand...
Click to collapse
Huh, that kernel should have worked. I asked for the combination duration since many people make mistakes there. Since we are clear of that, did You try the rubber band trick from here? That trick sometimes takes more than a day to work.
Yep i did that and i tried many different ways to make it work.. no luck. i got annoyed and i sent it to the repairs today...
I have rooted my xperia t2 ultra dual with kingroot ,and tried to replace with super su binaries, and rebooted my mobile,it boots successfully and then screen is blank,cannot see anything, but by pressing power power button it appears power off,restart ,screenshot ....how should I solve this plz help anyone it's urgent...
Thanks in advance
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Edwin Hamal said:
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Click to expand...
Click to collapse
Wants to revert to stock rom
Edwin Hamal said:
There are many ways to unbrick but the question is do you want to go back to stock or CM?
Click to expand...
Click to collapse
Wants to revert to stock rom
Plz help
Just download this file: https://mega.nz/#!PBEWiTYT!s9IaGIBLziIhgwJzqkmrFa5fFYE95RsGh4rxKa7cCwE
and flash it via twrp recovery.
Edwin Hamal said:
Just download this file: https://mega.nz/#!PBEWiTYT!s9IaGIBLziIhgwJzqkmrFa5fFYE95RsGh4rxKa7cCwE
and flash it via twrp recovery.
Click to expand...
Click to collapse
Thanks ,a lot but how to install twrp when iam stucked in a bootloop
agriculture said:
Thanks ,a lot but how to install twrp when iam stucked in a bootloop
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2764408 This will help you and also have you installed adb and fastboot in your pc? If not first install it.
Also don't forget to install the drivers as well.
T2 ultra dual cant turn on and cant charge
T2 ultra dual tried to charge it in a wall charger and tried it in usb connected to desktop charge but it only shows me a blinking red notification light.
i tried to turn it on but it wont. i tried to hard reset it with power button + volume up but nothing happen
Happened the same with me
So here's what I did
Use a branded data cable
And a 2amps output charger
Connect both
And connect it to your t2
Turn on the power of charger
As soon you see sony logo turn on the t2 normally
If it doesn't show sony logo,then disconnect everything and reconnect and repeat the procedure until it shows the sony logo
And don't let the battery go below 5 percent
Keep it to charge if battery is below 5 or 3
So yo won't have to do the 3 minutes procedure once again
And yeah..use a stable base..don't let the charging pin or mobile move during this process
For the question asked by narendra17
or just get ur charging slot replaced
hi,first of all my English isn't very good,sorry for that. my phone (Sony Xperia S (LT26i)) is dead and i can't turn it ON it also can't keep his charge even sometimes it was charging. So i decided to change my battery. I bought a BA800 battery and change it myself according to a video i saw on YouTube. after all my phone doesn't start up even i plug in it to adapter. just sometimes the logo of a repair appears and after few minutes it dissapers. when i plug in it to electricity the LED will be red. i don't know what is the problem !?
a repair man said that a new battery is ruined. so he change to a new battery but it doesn't start again and he says that it most be flashed but he can't flash it!
i myself searching internet and follow up structures (download flashtool,installing drivers,download ftf,....) but now when i press volume down my phone doesn't connect to PC. before it i haven't such a problem, i don't know what i have changed! please help me. my phone doesn't start up anymore and i can't change usb debugging mode or mtp. in device manage has yellow trianlges on some part including MTP USB device,Android device(Sony AFBI interface,sony composite ADB interface,sony fastboot interface),61833 class buss device.
mischievous68 said:
hi,first of all my English isn't very good,sorry for that. my phone is dead and i can't turn it ON it also can't keep his charge even sometimes it was charging. So i decided to change my battery. I bought a BA800 battery and change it myself according to a video i saw on YouTube. after all my phone doesn't start up even i plug in it to adapter. just sometimes the logo of a repair appears and after few minutes it dissapers. when i plug in it to electricity the LED will be red. i don't know what is the problem !?
a repair man said that a new battery is ruined. so he change to a new battery but it doesn't start again and he says that it most be flashed but he can't flash it!
i myself searching internet and follow up structures (download flashtool,installing drivers,download ftf,....) but now when i press volume down my phone doesn't connect to PC. before it i haven't such a problem, i don't know what i have changed! please help me. my phone doesn't start up anymore and i can't change usb debugging mode or mtp. in device manage has yellow trianlges on some part including MTP USB device,Android device(Sony AFBI interface,sony composite ADB interface,sony fastboot interface),61833 class buss device.
Click to expand...
Click to collapse
Was the phone unlocked???
What is the last thing you are doing when your phone gone to this??
nageswarswain said:
Was the phone unlocked???
What is the last thing you are doing when your phone gone to this??
Click to expand...
Click to collapse
how I can check my phone is locked or unlocked ?!
my phone was running,i turned it off, after that I replace my new battery (BA800) with old one and it gone to this mode.
mischievous68 said:
how I can check my phone is locked or unlocked ?!
my phone was running,i turned it off, after that I replace my new battery (BA800) with old one and it gone to this mode.
Click to expand...
Click to collapse
Check with another battery or try the old battery.
.
nageswarswain said:
Check with another battery or try the old battery.
.
Click to expand...
Click to collapse
I did it but it doesn't work.
mischievous68 said:
I did it but it doesn't work.
Click to expand...
Click to collapse
Goto Sony care
sony xperia s boots into recovery
hello , i have sony xperia s(lt26i) and i flash a miui 7 in xperia s using twrp recovery ,after that my phone working fine but when i tried to reboot and it goes into twrp again and again .please help me with that ,how to get out of loop of twrp recovery....?:crying::crying:
Satish2211 said:
hello , i have sony xperia s(lt26i) and i flash a miui 7 in xperia s using twrp recovery ,after that my phone working fine but when i tried to reboot and it goes into twrp again and again .please help me with that ,how to get out of loop of twrp recovery....?:crying::crying:
Click to expand...
Click to collapse
Clean flash ROM again
Try charging it at your pc with usb for some hours, it could fix the problem.
U may hv did this
Satish2211 said:
hello , i have sony xperia s(lt26i) and i flash a miui 7 in xperia s using twrp recovery ,after that my phone working fine but when i tried to reboot and it goes into twrp again and again .please help me with that ,how to get out of loop of twrp recovery....?:crying::crying:
Click to expand...
Click to collapse
I think u flashed recovery into boot.....possibly....
---------- Post added at 02:39 AM ---------- Previous post was at 02:38 AM ----------
Satish2211 said:
hello , i have sony xperia s(lt26i) and i flash a miui 7 in xperia s using twrp recovery ,after that my phone working fine but when i tried to reboot and it goes into twrp again and again .please help me with that ,how to get out of loop of twrp recovery....?:crying::crying:
Click to expand...
Click to collapse
What command did u use to flash recovery?
Satish2211 said:
hello , i have sony xperia s(lt26i) and i flash a miui 7 in xperia s using twrp recovery ,after that my phone working fine but when i tried to reboot and it goes into twrp again and again .please help me with that ,how to get out of loop of twrp recovery....?:crying::crying:
Click to expand...
Click to collapse
Or extract boot.IMG from miui ROM zip and flash it by flashtool