Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
leoni1980 said:
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
Click to expand...
Click to collapse
This has to do with the fact that ics doesn't work with the toshiba bluetooth stack.... If you change to the microsoft stack on yout XP laptop you will be able to use ICS.
Cheers,
HJ
only problem is, that not all PC bluetooth device have this choice, I mean change stack to microsoft.... before you buy any BT stick, look at manufarcuter web, if it is possible to use MS stack. I dont want to make propaganda for MSI products, but there is few BT, which have this choice. actually I using THIS one, and here is possible to install MS stack. here is manual, how to install this device with MS BT stack.
PS: this question has been answered XXX times, so try to search before ask
my bluetooth is integrated into my laptop, hence the convenience. why have microsoft taken a seemingly downward step in windows mobile 6 and made it even LESS compatible than before?!? seems a bit stupid to me.
Also this doesn't answer the question of why I am unable to connect my device via USB. I need this function for work. is there any way of installing the old wireless modem app as a simple solution?
thanks everyone for your help so far
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
vdavide said:
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
Click to expand...
Click to collapse
Care to tell us what laptop are you using and what bluetooth stack involved because some hardware could be forced to be supported by the MS driver.
sorted
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
---deleted---
leoni1980 said:
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
Click to expand...
Click to collapse
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
vdavide said:
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
Click to expand...
Click to collapse
Connection through USB supposed to be ok, hmm... but you can try to force the bluetooth hardware to be supported by the MS driver. Could you please do this and give me the details.
The step:
1. Start > Control Panel > System > Hardware > Device Manager
2. Find the unknown USB driver ( The one with the ? beside it)and right clicking on it > Properties > Details > Click the dropdown option and select 'Hardware Ids'
3. You will see something like 'USB\Vid_044E&Pid_300c&Rev_1915' and maybe 'USB\Vid_044E&Pid_300c'.
4. Write down the Ids. and post it here.
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I hope you've given me the complete Ids.If so then try this one. Backup the original bth.inf inside \windows\inf\ folder and replace with the one from this archive. Now try to install again by pointing to the new bth.inf. But please uninstall any previous installation first. If not success then tell me since I'm trying to use the widcomm stack.
thx CYPHOL , i will try tomorrow
i'm added the original inf file for this device ...
vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I tried the Internet Sharing facility on my XP tower upstairs (which has never had Activsync on it) and it works just the same - no need for drivers - it's as if I'm just plugging an ethernet cable in.
Be interested to know if the same will be true of old laptops with SP1, as is mine at work.
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
lanwarrior said:
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
Click to expand...
Click to collapse
WM6 is using PANU whereas WM5 is using NAP as to connect through Bluetooth but if you use USB it should connect as is only that you have to switch the bluetooth off before making the connection.
FYI, I'm using Vaio VGN-TX37GP and can connect through both the USB and Bluetooth conns. after modifying the infos on the MS inf driver file.
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
vdavide said:
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
Click to expand...
Click to collapse
Nice to hear that but sorry for my careless mistakes done in doing the scripting.
I got ths same issue.
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
briols6 said:
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
Click to expand...
Click to collapse
Check this post:
http://forum.xda-developers.com/showthread.php?t=298691#10
Hi guys,
my problem is, everytime I want to flash a non-origianl-ROM (with SD-Card Falsh) I got the following Failure: "Invalid Caertificate"
I think the solution could be to use the CID-Unlock patch, but it semms like my USB-Port doesnt work any more, so I could only use my Bluetooth to connect my pda to my PC and with a bluetooth connection this patch doesnt work.....
Does anyone know a solution to my problem ????
(sorry for grammatical or spelling mistakes, I'm from Germany, and I could not speak English very well ^^ )
Hi
You may want to check out the WM6 forum for this http://forum.xda-developers.com/forumdisplay.php?f=362
You will need to CID unlock you phone but i would not do this over bluetooth. What is the problem you are having with the USB port?
Cheers
Dave
Source from KingMobile of China:
http://www.kingmobile.net/bbs/viewthread.php?tid=16101
Not try yet. I have uploaded it to minimize hassle.
http://www.mediafire.com/?sharekey=9877bf744e430decd2db6fb9a8902bda
installed, both phone and PDA upgraded.
The speed is much faster as DXHE1 as before.
Does Windows live messenger work? What about port splitter? Is it usable with TomTom7?
WLM works well both wifi and data, sorry Im from HK and we dont use Tom Tom...
hi, thanks for sharing, is it simplified Chinese version ?
Is it running WM6 or WM6.1?
WWE or chinese?
I guess its singapore version, english and support chinese reading only, just like those previous ones. DHXC4 etc...
The speed is much faster, even more than DHXE1..
WM6.0 with WWE
Thanks ~ but after flashed this ROM. MSN cannot connect thought GPRS/HSDPA or Wi-Fi
It pop up error " There's a connectivity program. Make sure you're in an area with good reception and try again " when first sign in,
Anyone have the same issue ?
Thanks
I experienced these before and I thought is MSN problem,
actually is your auto config software problem and I did try.
If u just formatted the rom, use USB or wifi it works...
I use mannual input data and works well.
Please test these again, let data try last thing.
dogmood said:
I experienced these before and I thought is MSN problem,
actually is your auto config software problem and I did try.
If u just formatted the rom, use USB or wifi it works...
I use mannual input data and works well.
Please test these again, let data try last thing.
Click to expand...
Click to collapse
Just installed many program and optimize it .... too bad, if there any other method rather than hard-rest ?
I already retry the auto-config in operator setting and manual enter the AP but it doesn't work
Thanks
Sorry im not expert on this.
This is what I tested and concluded, thats why from now on I dont use auto config.
At least you will see the phone run faster than before rite?
dogmood said:
Sorry im not expert on this.
This is what I tested and concluded, thats why from now on I dont use auto config.
At least you will see the phone run faster than before rite?
Click to expand...
Click to collapse
Thanks ~~ Finally the problem solved after HARD-REST !!
I think this build of ROM have BUG on AUTO-CONFIG.
d3vil said:
Does Windows live messenger work? What about port splitter? Is it usable with TomTom7?
Click to expand...
Click to collapse
no need for port splitter
TT 7 works !
flx872 said:
no need for port splitter
TT 7 works !
Click to expand...
Click to collapse
Guys, why is everyone talking about port splitter ...? I've NEVER used any 3rd party app to get GPS up and running
TT7, GARMIN, IGO8, GPSTUNER, Sygic McGUIDER - all worked on EVERY stock ROM I've had (DXHC4+), including ALL modded EFN ROM's.. and I've always used COM8, 4800 baud..
inertiax3 said:
Guys, why is everyone talking about port splitter ...? I've NEVER used any 3rd party app to get GPS up and running
TT7, GARMIN, IGO8, GPSTUNER, Sygic McGUIDER - all worked on EVERY stock ROM I've had (DXHC4+), including ALL modded EFN ROM's.. and I've always used COM8, 4800 baud..
Click to expand...
Click to collapse
me too...never understood what's this about?
all i had to do is to update the COM port to COM8 in GPS setup.
ried to update the phone part only.. flashing kept hanging in 57%.. hmm hope I can flash my phone part again..
knights191 said:
ried to update the phone part only.. flashing kept hanging in 57%.. hmm hope I can flash my phone part again..
Click to expand...
Click to collapse
I did the same thing (update of the phone part only) successfully.
Phone Firmware version is now DXHH1,
PDA is DXHE1 (EF 3.4U)
May I ask why some ppl just want to upgrade the PDA section only but not whole part?
dogmood said:
May I ask why some ppl just want to upgrade the PDA section only but not whole part?
Click to expand...
Click to collapse
I flashed with EBOOT + PDA + PHONE and didn't found any problem.
BTW, the HARD RESET LOGO was coming back after flashed to HH1 comparing with HE1.