First of all many thanks to you all for the great work.
I installed the shaps WM6 PRO 3.30c on my own device and everything works fine...
A friend gave me his tytn to upgrade it too...
done.
unfortunaltelly now i have a very urgent problem with this tytn!
The Exchange-Server to synchronize is only accesable localy!
On WM5 we realiesed the remote synchro with a vpn tunnel!
everything worked fine...
After installing your rom i configured all like in the past.
VPN connects automatically and works, Exchange connects...
After a few seconds it begins to synchronize (checking for updates / sync folders....) and then stops with errorcode
8502000f
If i connect the tytn via usb to my pc (VPN open and settings "connect to work") everything works fine...
By using wlan or 3g i have the above mentioned problem!
So what can i do?
Does anybody have the same problem or know what i could have made wrong?
PLEASE PLEASE help me!
My friend will pick up the device on friday! and i don't want to tell him "sorry doestn work i dont know why..."
Many Many thanks for your assistance!
Greetings from germany
Marco
Edit/Delete Message
Related
Has someone got these files for me from the WM5 rom?!
GSM610.dll and msfilter.dll
i want to try to use them on the 2003SE BA.
the filter uses a new echo filter, that can be very usefull!!!
hallo,
I only got a gsm610.acm module.
And is it working on 2003?
Nope, not working ,
trying WM5 now btw. isn't working there either.
Is it safe to upgrade to WM2005?
I read it can turn your phone into a paperweight...
Is it easy to do?
I have done it with succes...
am trying to get some anoying notifications out of its system though (message sent etc)
also the ability to activesync over gprs is missing, this i used a lot!!!
so there are some points i want fixed!!!
but to conclude: it works.
Can anyone verify if WM6 on the Trinity brings back the Bluetooth DUN profile?
I'm 95% happy with the Dopod WM5 ROM on my P3600, the only thing missing is that I can't get traffic updates to my tomtom 910.
Hi, I am using mun's 2SE rom and I can now get traffic updates on my tomtom 910.
I did not have to do anything special on the SE version, it just worked.
WM5 etc would not see anything other than the BTHF profile.
all workign now
BMF
Very VERY good news, off to go download WM6 now
I just downloaded and installed mun's 2SE (flawless install). Wow is my phone better
Anyway, it does enable TomTom 910's traffic updating. I had to "delete" my phone from the TomTom 910 and then reconnect to it.
Simple.
Is there any possibility this Bluetooth patch can be worked into the WM6 releases for the Hermes??
I have exactly the same problem (no DUN profile), but on the Hermes.
DOH!
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
badmelonfarmer said:
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
Click to expand...
Click to collapse
I found solution) here it is http://forum.xda-developers.com/showpost.php?p=1281328&postcount=882
My Tom Tom GO 700 reports this error during the configuration.
"This phone does not report Wireless data connection (DUN) cabalities."
I have loaded mentioned CAB's.(SP1 and BT_DUN) Is ther a hope on getting this going?
thanks Peter
After adding new cabs, delete phone from TomTom, delete TomTom relationship from phone. Resync.
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
psimek said:
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
Click to expand...
Click to collapse
try to add this reg entries and files... sorry don't have time to make a cab
Thanks MuM,
Phone is recognized, but cannot connect to cingular.
I will try to play with more settings before I go back.
Peter
Where to Install MODEMLINK?
Where should the contents of MODEMLINK be install? Windows dir?
Thanks
mun_rus said:
try to add this reg entries and files... sorry don't have time to make a cab
Click to expand...
Click to collapse
Please kindly advise where I should put those reg entries & files? TKS & RGDS!
dan.gior said:
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Click to expand...
Click to collapse
to connect over usb you need usb rdiver HTC for pc...
here:
to connect over usb you need usb rdiver HTC for pc...
here:
So I'm a bit confused, does that mean we can use a data connection on the Hermes via Bluetooth for the TomTom 910?
I recommend you this thread, that's the way I got tomtom go data connection and plus services working with my wm 6-updated wizard:
http://forum.xda-developers.com/showthread.php?t=314371&page=3#21
dartrax
ervius said:
to connect over usb you need usb rdiver HTC for pc...
here:
Click to expand...
Click to collapse
Thanks worked painlessly on my O2 Orbit (Artemis/3300).
What a great site - I've learnt loads already and lookforward to overclocking next!
Neil
connected my new smartphone shadows with tom tom go 700
After 5 days of struggle, I finally was able to connect my wireless data (DuN) with my tom tom go 700.
What i did is as follows:
extract the attachment and do the following:
1. Unlocked my phone app for tmobile
2. installed WM6_btdun
soft reset
3. copied all files of SPDUNHACK including registary one to the windows folder(\windows)
4. Installed the installed ATCUI, showed me a serial (COM:1) port
softreset
and connected my tom tom...
But as the experts mentioned earlier, while your tom tom is connected, you are not able to surf the net but able to do all other things. It says voice call active.
Good luck!
Hi guys
I'am alredy getting crazy about this. I upgraded my XDAIIs to WM5, ROM version 5.04.10, ext ROM is helmi c14 and I need to use my pda as a modem for the PC.
The problem is that when tapping to internet sharing everything seems fine but my PC doesn't find any PAN given by PDA.
I googled for 2 weeks already and I also tried some hacks to enable DUN but without results.
Please help me
Hello,
I have searched hours to have a blackberry client working on my Artemis :
- have tried many versions
- have tried different ROMs from Meschle
Everytime I have same result I cannot connect to Blackberry and the black berry client does not show any service...
Anyone have HTC P3300 (Artemis) with working Blackberry client?
Please advise I I really need this for my work...
My current configuration :
HTC Artemis P3300 unlocked
Meschle's ROM 4.02 Lite w CUBE
I live in the czech republic and my SIM card is a T-Mobile one with all services activated (BlackBerry + Edge...)
Thanks
---
Jeremy
look in this thread
http://forum.xda-developers.com/showthread.php?t=369269
Dont work
Thanks for reply but I already read this post among many others it does not work on my Artemis... still cannot connect or get an IP...
How to know which version of radio i have? is it on boot screen?
Thanks
I have an Artemis and I am using the blackberry functionality successfully. Here is a site where you can find all information about HTC and blackberry:
http://sems.org/entry.asp?ENTRY_ID=276
Under Start-Settings-System-Device Information you can find all information required about the OS etc. of your Artemis. I use the 03.07.90 Radio version and it works fine for me. I use the Artemis Touch 3.01 Rom. Apparently nobody has been able to run the blackberry connect under WM 6.01.
For me it was crucial, to ask your IT department to re-activate my Blackberry account. Before, nothing worked and since then, it is quite stable. I use 4.0.0.97.
Hope this helps.
WM5?
Thanks a lot for reply.
So are you advising me to flash my device with a ROM containing WM5?
I would do it if I find that I can use BlackBerry as this is very important for me...
Are there any big differences between WM5 and WM6? Would I lack anything by downgrading ROMs?
Currently I have Artemis Touch 4.02 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Lite)
Thanks again.
---
Jeremy
As mentioned, Blackberry connect does not work with WM6.1, but does with WM6. I am using
Artemis Touch 3.01 Rom
which is based on WM6.
All OK
So I downgraded ROM from 4.02 Lite WM6.1 to 3.01 Lite ...
Then I installed BB Connect (same version as you as all others don't work with this ROM and my device)
Finally I got the everything working!!! What a releaf !!!
Thanks a lot!!
Nevertheless I am looking forward for next ROM from Meschle which will be compatible with newer releases of the BB Client...
Best regards,
P.S. I also tweaked registry in order to save my corporate emails to storage card instead of main memory!!
P.S.2 : Didn't you notice that your device is slower after installation of black berry services?
How did you do the tweak of the registry?
In some instances, my Artemis has become slower, sometimes it even seems, it hangs up. But it seems that this is the price to pay.
BTW, HTC and RIM have now entered into a strategic partnership and all future HTC models should be automatically provided with Blackberry connect. Thus we might see an updated version of Blackberry connect sonn, that also works with WM6.1.
...
Hey,
Thanks for update...
I have modified the registry this way :
1- add "PropertyPath" value="\Storage Card\Mail" datatype="string"
to this place in Registry : HKLM\System\Inbox\Settings
*** Note : Do not put quotes in the value... ***
*** You can edit registry with many editors such as PHM or TRK ***
2- Create a folder Mail in on your storage card
3- Copy whole content of \Windows\Messaging in the new created folder \Storage Card\Mail
4- Finally after you do this make sure that you take away the messaging today plugin from today screen (important... you can put it back after soft reset)
5- Soft Reset
-----------------------------
I have another problem now with the BB Connect. Since I installed it everything is fine just I have to unlock my phone every 30 min using a password. This is very annoying as you have to open keyboard and enter password everytime you dont use your phone for some time...
Do you have this as well?
Is there any way to disable locking of phone?
Thanks
Solved
I have solved the password issue :
I downloaded MEMMAID application which is able to manage system services and I manually stopped the BlackBerry Security service.
Be careful though this is a powerful piece of software which can really harm your device if misused...
advice : do not change the service startup type (auto/manual) just stop the service after each Soft Reset otherwise you will not be able to use your device after soft reboot.
I managed to get my Blackberry Connect working on my P3300. Here are the details:
HTC P3300 (purchased in India)
Artemis Touch 4.02 ROM
Radio 3.08.90
Blackberry Connect Version 4.0.0.97
Device Id set to HTC_P3300
HKLM\System\Version\AKU = .0.3.1
Carrier = Airtel India (http://www.airtel.in/wps/wcm/connect/airtel.in/Airtel.In/Home/ForYou/BlackBerry/)
Connecting to BES on Exchange at company workplace.
I see email, calendar, notes and contacts synced from my Outlook.
Thanks to all for the data/input on versions/radios, etc.
tip
Hey,
I updated ROM (6.1) and for some reason the connection would last few seconds and then I would loose IP address...
Long time I didn't know what to do and even going back to original working ROM it didn't work...
Finally, I deleted my internet connection and soft reset.. HOP the connection was up and running again
So now I will add again my internet GPRS connection (for www and other games/weahter...) and will see... Probably I have to setup some sort of exceptions in the lists to prioritize BlackBerry somehow...
Cheers.
BTW, BlackBerry works with WM 6.1 ! Also there is new version 4.0.0.100 which works as well for me.
hi i have a imate jasjar, the problem is i cannot connect to gprs it gives error message to check setting etc etc. i have same setting on another windows mobile,
i tried all radio roms update and also full rom update but no luck.
rest all function is ok even wifi is ok.
any solution.
regards
gopal
gopalg73 said:
hi i have a imate jasjar, the problem is i cannot connect to gprs it gives error message to check setting etc etc. i have same setting on another windows mobile,
i tried all radio roms update and also full rom update but no luck.
rest all function is ok even wifi is ok.
any solution.
regards
gopal
Click to expand...
Click to collapse
Ok first of all there are few service provider cab you can find for your country... well i had problem to get GPRS working tried the customer service but no use... then i installed the cab (for me it's optus, Australia) and i didn't need to touch settings at all .. it just connected automatically to GPRS... so best option will be to find the appropriate service provider cab for your country and install...
Cheers
Rajiv
thanks rajiv,
but the issue is not with settings , i just want to make sure whether it is some hard ware issue, all functions are perfectly ok and it is a friends handset and we have used gprs some time back also.
br
gopal
gopalg73 said:
thanks rajiv,
but the issue is not with settings , i just want to make sure whether it is some hard ware issue, all functions are perfectly ok and it is a friends handset and we have used gprs some time back also.
br
gopal
Click to expand...
Click to collapse
Bro it's really hard to tell weather it's hardware isuue or not from such a little information... but it should not be hardware issue in my opinion... well try different service provider and try to install the cab and see... it should work...
Cheers
Rajiv