hi i have a imate jasjar, the problem is i cannot connect to gprs it gives error message to check setting etc etc. i have same setting on another windows mobile,
i tried all radio roms update and also full rom update but no luck.
rest all function is ok even wifi is ok.
any solution.
regards
gopal
gopalg73 said:
hi i have a imate jasjar, the problem is i cannot connect to gprs it gives error message to check setting etc etc. i have same setting on another windows mobile,
i tried all radio roms update and also full rom update but no luck.
rest all function is ok even wifi is ok.
any solution.
regards
gopal
Click to expand...
Click to collapse
Ok first of all there are few service provider cab you can find for your country... well i had problem to get GPRS working tried the customer service but no use... then i installed the cab (for me it's optus, Australia) and i didn't need to touch settings at all .. it just connected automatically to GPRS... so best option will be to find the appropriate service provider cab for your country and install...
Cheers
Rajiv
thanks rajiv,
but the issue is not with settings , i just want to make sure whether it is some hard ware issue, all functions are perfectly ok and it is a friends handset and we have used gprs some time back also.
br
gopal
gopalg73 said:
thanks rajiv,
but the issue is not with settings , i just want to make sure whether it is some hard ware issue, all functions are perfectly ok and it is a friends handset and we have used gprs some time back also.
br
gopal
Click to expand...
Click to collapse
Bro it's really hard to tell weather it's hardware isuue or not from such a little information... but it should not be hardware issue in my opinion... well try different service provider and try to install the cab and see... it should work...
Cheers
Rajiv
Related
Hi there i have a m2000 running helmis 1.3.2 wm5 unlocked on vodafone , having no memory card i couldnt follow the instructions for the extrom folder so was wondering how i can setup my gprs and mms etc for use on vodafone (UK if that helps) , i did try but i keep getting "the ansewring modem has disconnected"
can someone help me?
pleeeaaasse
anyone? plz a how to would do , i got the settings here http://www.mphone.co.uk/mms_wap_settings_vodafone.html
thought about the vodaphone site
http://online.vodafone.co.uk/dispat...&_pageLabel=Page_BOS_PDA_Guide&pageID=GM_0302
Not sure what the settings are like on WM5 but the menus cant be that different.
that seems completely different to me :/ , cheers for responding though
roy8846 said:
anyone? plz a how to would do , i got the settings here http://www.mphone.co.uk/mms_wap_settings_vodafone.html
Click to expand...
Click to collapse
My guess is that you could use the UK T-Mobile cab's for GPRS & MMS and then just change access points, password etc for Vodaphone. I assume you have the T-Mobile cab's.
i dont have t-mobile cabs no (just used search , came up with allsorts )
roy8846 said:
i dont have t-mobile cabs no (just used search , came up with allsorts )
Click to expand...
Click to collapse
Do you mean you searched your local machine or the internet?
In the EXTROM directory of Helmi's ROM directory is a subdirectory called Operator. Use UK_T-Mobile_MMS.cab for MMS and then edit to Vodaphone. For GPRS I suggest Vodafone_GPRS.cab.
I am with T-Mobile and I had to search around a bit for MMS & GPRS when I flashed the Helmi ROM. I think the instructions relating to EXTROM are a bit vague.
Hope this helps.
ahh , so they will configure on their own? wow cheers , yes i have these in the extrom folder , i was searching the site
Hallow.
I have upraded my Vario2 to the following settings:
IPL-1.04, SPL-2.10.Olipro,
with Radio V-1.41.00.10 and WM6 pro Black 3.0.1 ROM .
The upgrading went perfect with no problems.
The device boot properly.
The only problem is that the data connection stays on GPRS where I know there is a 3G connect.
T-Mobile support dont want to help solving this problem.
Any Idea anyone?
Regards
Lior Lavon.
llavon said:
Hallow.
I have upraded my Vario2 to the following settings:
IPL-1.04, SPL-2.10.Olipro,
with Radio V-1.41.00.10 and WM6 pro Black 3.0.1 ROM .
The upgrading went perfect with no problems.
The device boot properly.
The only problem is that the data connection stays on GPRS where I know there is a 3G connect.
T-Mobile support dont want to help solving this problem.
Any Idea anyone?
Regards
Lior Lavon.
Click to expand...
Click to collapse
Hi Lior
Weird, I have the exact same config and i´m not experiencing no problems!
I live in Overijssel and have in Zwolle 3g (UMTS).
I have also the Vario II
Do you have installed other software... maybe you van install bandswitch manager (you can find it in the developer forum, use search please) with this progrom you can easy control your band settings!
llavon said:
Hallow.
I have upraded my Vario2 to the following settings:
IPL-1.04, SPL-2.10.Olipro,
with Radio V-1.41.00.10 and WM6 pro Black 3.0.1 ROM .
The upgrading went perfect with no problems.
The device boot properly.
The only problem is that the data connection stays on GPRS where I know there is a 3G connect.
T-Mobile support dont want to help solving this problem.
Any Idea anyone?
Regards
Lior Lavon.
Click to expand...
Click to collapse
READ THE ****ING WIKI !!!
smarty77 said:
Hi Lior
Weird, I have the exact same config and i´m not experiencing no problems!
I live in Overijssel and have in Zwolle 3g (UMTS).
I have also the Vario II
Do you have installed other software... maybe you van install bandswitch manager (you can find it in the developer forum, use search please) with this progrom you can easy control your band settings!
Click to expand...
Click to collapse
How did you fixed the Tmobile operetor settings after the apgrade ?
Did you follow the T-Mobile site ? or you used a cab configuration file?
Maybe I have a faulty operetor settings, but I repeat that I do have a GPRS reception.
Regards
Problem Solved
Problem Solved after using the operetor cab for T-Mobile.
Tnx all.
I'd tryed some ROM of D810 included official version.But all version have same problem that is miss internet mail box setting when reset or down.why?Maybe the WM6's problem?
Hi, I have the same problem with any ROM WM6, and anybody tell put a correct bug fix. BT settings and others personal setting too.
I have the same pb. Can you tell what to install to fix it ? THX
i have this problem too
You can try MailAccountRepair : http://nicolasmauri.blogspot.com/
It works for me.
The Solution
mbt2302 said:
I have the same pb. Can you tell what to install to fix it ? THX
Click to expand...
Click to collapse
See my post and you'll never lost data.
Filicloe.
Hi guys!!
I don´t mean to be rude or a smart ass,but could you please read the forums,this happens with most of the wm6 versions.
Thanks.
http://forum.xda-developers.com/showthread.php?t=320803
http://www.trinityguides.info
vv_ said:
You can try MailAccountRepair : http://nicolasmauri.blogspot.com/
It works for me.
Click to expand...
Click to collapse
I'd success used the software but missed again for one day and some reset.I run the software again and success again.I don't how long it can alive.
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
dor515 said:
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
Click to expand...
Click to collapse
Hi! tell us more about: - which country did you buy your P3300
- which ROM did you install
I have WM6 and Ibought it on the US
dor515 said:
I have WM6 and Ibought it on the US
Click to expand...
Click to collapse
Ok did you read the howto flash a ROM on ARTEMIS?
If yes you probably saw a line that told you to flash twice your P3300.
It often resolve flashing problems. GPS usually use COM4
You can test with free GPS software or with Navio software.
COM Ports
I may be wrong but I seem to have a vague recollection that in the US, the original ROMs use COM9 for GPS (can anyone confirm?). Flashing to a new rom will have changed this to COM4 so you may just need to reconfigure your GPS settings in the individual applications.
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
dor515 said:
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
Click to expand...
Click to collapse
Official HTC WWE WM6 SHOULD work with any P3300, that couln't be yours that is not possible to run GPS part.
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
dor515 said:
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
Click to expand...
Click to collapse
No, All HTC P3300 have got a GPS inside (it remember M$ pub ) only some P3300 haven't got Wifi inside.
You should forget about WM5. I said that I am pretty sure WM6 should work with your GPS.
I can give you a WM5 but it is French orange switzerland version
Was your Wm6 an original HTC WWE version?
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Try this...
Start -> Settings -> System Tab -> Clock & Alarms
On Time tab, make sure your time AND time zone is set correctly
Start -> Settings -> System Tab -> Regional Settings
On Region tab, make sure your region is set correctly
Start -> Settings -> System Tab -> External GPS
On Program tab, make note of GPS Program Port
Download & Install VisualGPSce
http://www.visualgps.net/VisualGPSce/VisualGPSceInstall.CAB
Run Visual GPSce
Go to Connect -> Serial port
Set Port to that in "External GPS" setting above and Click OK
If the red dot in the bottom right flashes then your GPS is ok! You may just have to wait for a lock (look for QuickGPS too).
dor515 said:
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Click to expand...
Click to collapse
Hi! Download from this link I found on XDA ARTEMIS Wiki
http://rapidshare.com/files/60087606/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
PS: Link of the XDA ARTEMIS Wiki : http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis
Tell us if it is working after this HTC WWE release.
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
dor515 said:
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
Click to expand...
Click to collapse
Did you reinstall the official ROM version?
Hey when I try to install the ROM WWE after I press the update button it sends me in a white screen and than he gives me ERROR 260 means cant connect with the device what should I do
p.s. by the way my operation system is Vista so just let you know if there is any kind off significance to the subject
Darren.
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Try hard reset
First you can try to hard reset your device (pressing the 2 soft key and reset at the same time) You will get a message, press the green phone button. If this does not resolve your problem... you can read first post in the forum, to learn how to flash a new ROM. Does your gps ever worked ?
dor515 said:
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Click to expand...
Click to collapse
Ok, the best thing to do is to CID unlock your device (I thaught you already done that)
Read this Thread carefully it will explain why!http://forum.xda-developers.com/showthread.php?t=308242
Then use only this to CID unlock your device : http://rapidshare.com/files/119852558/Artemis_USPL.rar.html
After that reinstall the original HTC WWE ROM.
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
uniqueboy said:
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
Click to expand...
Click to collapse
Uniqueboy you are too funny...but the easiest way is SDCARD flashing...have a look at XDA-Artemis-Wiki http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Source from KingMobile of China:
http://www.kingmobile.net/bbs/viewthread.php?tid=16101
Not try yet. I have uploaded it to minimize hassle.
http://www.mediafire.com/?sharekey=9877bf744e430decd2db6fb9a8902bda
installed, both phone and PDA upgraded.
The speed is much faster as DXHE1 as before.
Does Windows live messenger work? What about port splitter? Is it usable with TomTom7?
WLM works well both wifi and data, sorry Im from HK and we dont use Tom Tom...
hi, thanks for sharing, is it simplified Chinese version ?
Is it running WM6 or WM6.1?
WWE or chinese?
I guess its singapore version, english and support chinese reading only, just like those previous ones. DHXC4 etc...
The speed is much faster, even more than DHXE1..
WM6.0 with WWE
Thanks ~ but after flashed this ROM. MSN cannot connect thought GPRS/HSDPA or Wi-Fi
It pop up error " There's a connectivity program. Make sure you're in an area with good reception and try again " when first sign in,
Anyone have the same issue ?
Thanks
I experienced these before and I thought is MSN problem,
actually is your auto config software problem and I did try.
If u just formatted the rom, use USB or wifi it works...
I use mannual input data and works well.
Please test these again, let data try last thing.
dogmood said:
I experienced these before and I thought is MSN problem,
actually is your auto config software problem and I did try.
If u just formatted the rom, use USB or wifi it works...
I use mannual input data and works well.
Please test these again, let data try last thing.
Click to expand...
Click to collapse
Just installed many program and optimize it .... too bad, if there any other method rather than hard-rest ?
I already retry the auto-config in operator setting and manual enter the AP but it doesn't work
Thanks
Sorry im not expert on this.
This is what I tested and concluded, thats why from now on I dont use auto config.
At least you will see the phone run faster than before rite?
dogmood said:
Sorry im not expert on this.
This is what I tested and concluded, thats why from now on I dont use auto config.
At least you will see the phone run faster than before rite?
Click to expand...
Click to collapse
Thanks ~~ Finally the problem solved after HARD-REST !!
I think this build of ROM have BUG on AUTO-CONFIG.
d3vil said:
Does Windows live messenger work? What about port splitter? Is it usable with TomTom7?
Click to expand...
Click to collapse
no need for port splitter
TT 7 works !
flx872 said:
no need for port splitter
TT 7 works !
Click to expand...
Click to collapse
Guys, why is everyone talking about port splitter ...? I've NEVER used any 3rd party app to get GPS up and running
TT7, GARMIN, IGO8, GPSTUNER, Sygic McGUIDER - all worked on EVERY stock ROM I've had (DXHC4+), including ALL modded EFN ROM's.. and I've always used COM8, 4800 baud..
inertiax3 said:
Guys, why is everyone talking about port splitter ...? I've NEVER used any 3rd party app to get GPS up and running
TT7, GARMIN, IGO8, GPSTUNER, Sygic McGUIDER - all worked on EVERY stock ROM I've had (DXHC4+), including ALL modded EFN ROM's.. and I've always used COM8, 4800 baud..
Click to expand...
Click to collapse
me too...never understood what's this about?
all i had to do is to update the COM port to COM8 in GPS setup.
ried to update the phone part only.. flashing kept hanging in 57%.. hmm hope I can flash my phone part again..
knights191 said:
ried to update the phone part only.. flashing kept hanging in 57%.. hmm hope I can flash my phone part again..
Click to expand...
Click to collapse
I did the same thing (update of the phone part only) successfully.
Phone Firmware version is now DXHH1,
PDA is DXHE1 (EF 3.4U)
May I ask why some ppl just want to upgrade the PDA section only but not whole part?
dogmood said:
May I ask why some ppl just want to upgrade the PDA section only but not whole part?
Click to expand...
Click to collapse
I flashed with EBOOT + PDA + PHONE and didn't found any problem.
BTW, the HARD RESET LOGO was coming back after flashed to HH1 comparing with HE1.