Related
[Q&A] [DEV][OTA] CyanogenMod 11.0 Galaxy 551/Callisto (GT-I5510) Port [androidarmv6]
Q&A for [DEV][OTA] CyanogenMod 11.0 Galaxy 551/Callisto (GT-I5510) Port [androidarmv6]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][OTA] CyanogenMod 11.0 Galaxy 551/Callisto (GT-I5510) Port [androidarmv6]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Ansh2000 said:
result is same as before.
Click to expand...
Click to collapse
TWRP 2.6.0.0 and ClockworkMod v6.0.5.3 upload pls.
can't install it
Hi ! I need help with this installation procedure, cause i put the code on the terminal emulator, and then, my cwm is deleted.. I want to try this cm rom ! Please help !
Problem with recovery
I didn't have problems before with installing any rom or recovery, I think I've passed through all of possible combinations, but this time, it's terribly buggy :/
I started from stock rom 2.3.6 XEO (as always) then installed CWM Custom Recovery "CWM-5.0.2.8_GAZZY.tar" (need some cwm to update, right?) but stock rom didn't find "flash_image" just like few other roms (arkas for ex.)
Finally Burnmode's KitKatSpecialEdition didn't alert about anything missing and it just jumped to the next line. (success I think, right?) The problem is that when I reboot into recovery it flashes a blank, black screen and reboots leaving my phone recovery-less ! What do I do wrong? Since then I tried many roms and most of them don't work anymore (no luck with cm10.2 for example, KitKat special edition works, so it's the only thing I can now run without bugs, but it's BurnMode's rom, it always works well)
I downloaded recovery.img "2014-12-04 22:43:18" which is the newest (at least now!) is there a problem with the recovery, my phone or maybe I am doing something wrong? My options are now very limited since many things crash my phone (can't flash a stock rom anymore, might be hard to do it again)
Hi
Thanks for your great work. I updated my cooper (s5830) to the latest release but my device won't boot. So I return back to the previous version.
For totoro??
Hi Sir, Im on Galaxy Y s5360 , no possibility for our totoro device?
Help!
help me when i'm trying to download cwm on github is error that i'm missing the Overall/Read permission. How can i fix it? Help
recovery
I couldnt download u recovery, u wot m8 with it i havrnt got perms, upload it normal or get REKT
Can we expect working cm12 on our devices? Or this is the end of the unofficial support?
The page is closed now. Is anybody known how long will be unable to download ROMs on this page? Are there any other links in which we can get RC14 for Callisto? Thanks for help!
Updates? LinkS?
Hi, are there any updates for Callisto?
Whats the last stable build for daily use?
LInks?
anasahmad17 said:
Hi, are there any updates for Callisto?
Whats the last stable build for daily use?
LInks?
Click to expand...
Click to collapse
No more development since Feb '15 (http://forum.xda-developers.com/showpost.php?p=58590015&postcount=261), last version seems to be
Code:
[...] 112913587 Feb 11 18:56 cm-11.0.0-GT-I5510-callisto.zip
and the server hosting the images has gone (http://download.androidarmv6.org/_builds/callisto/).
You may try to find a copy of the zip, check the md5sum (mine is 37c0f0fadb2f0d7444a175e42b78a84a )
Please share your findings.
BTW, 11.0-20150211 (that's how it identifies itself) is quite responsive once you've changed the CPU governor and IO scheduler settings ("Performance" menu in Settings, I'm using SmartassV2 and Deadline. Only tick "Set on boot" after a while of testing, I have seen some particular settings freeze the phone!)
steve8x8 said:
No more development since Feb '15 (http://forum.xda-developers.com/showpost.php?p=58590015&postcount=261), last version seems to be
Code:
[...] 112913587 Feb 11 18:56 cm-11.0.0-GT-I5510-callisto.zip
and the server hosting the images has gone (http://download.androidarmv6.org/_builds/callisto/).
You may try to find a copy of the zip, check the md5sum (mine is 37c0f0fadb2f0d7444a175e42b78a84a )
Please share your findings.
BTW, 11.0-20150211 (that's how it identifies itself) is quite responsive once you've changed the CPU governor and IO scheduler settings ("Performance" menu in Settings, I'm using SmartassV2 and Deadline. Only tick "Set on boot" after a while of testing, I have seen some particular settings freeze the phone!)
Click to expand...
Click to collapse
I tried finding the rom and the only one i could find on the inter-webs is here but the website is paid one so i cant download and i cant check the checksum
http://chomikuj.pl/kaktus47/Telefon....0.0-GT-I5510-callisto,4616249982.zip(archive)
OK; here you go. That's what I found on my disk. No checksums, so you got to trust me, or unpack and inspect everything. (Perhaps someone else can confirm?)
https://drive.google.com/folderview...hrbmxzZFUwdTd0N1RSdTN4OHI1VzhsVlk&usp=sharing
Prerequisites:
You must have flashed CWM6 using Odin before.
Also you need a second partition on your sdcard, formatted as ext4.
Preparation:
Put the files you need on the sdcard (normal vfat partition), shut down the phone.
Charge the phone's battery.
Now the really tricky stuff (if you mastered Odin, that's just a piece of cake though):
Start the phone into recovery.
Flash the ROM image, and wipe data.
Boot into Android, install and setup s2e to use the sd-ext partition.
Reboot into recovery.
Flash the gapps package, and possibly one of the keyboard zips (see http://forum.xda-developers.com/showpost.php?p=56625731&postcount=162 for those). You may have to switch off package checks in between.
Reboot into Android, and change your governor and io scheduler settings.
Done.
Edit: I've got requests to share the filespace - which should be accessible by link. I'm re-adding the URL now. Apologies to everyone who tried in vain
@steve8x8 Hi, I know it's been a long time but i hope you see this, but could you please be more specific with the steps? what files to use, what keys to press? Sorry it's been a while since i used this phone or any android phone, what odin version should i use?
Have you searched the 'net (and the archive.org) for the original 551 blog? It has/had a quite good explanation of almost everything related to this particular phone. Odin version doesn't matter much, I had used 4.34 (that was current when the instructions were written) and 4.43 IIRC, no difference. Make sure to get good instructions for the CWM flash, as this is the stage where most bricks happen.
To make things easier, I'm uploading the stuff related to the Odin step from my HD ("Odin" subfolder on GDrive), more than two years old. Use them on your own risk, and check the URLs provided.
Note that I didn't go directly for CM11, but installed CM10.2 first. I would have to read the instructions to tell whether this was actually necessary...
On the way, I upgraded the recovery (from the jenkins server that doesn't exist any longer, http://jenkins.androidarmv6.org/view/Developers/job/cm-recovery/24/ of Oct 2014) to 6.0.5.3. (IIRC I did this using the terminal emulator, not Odin, but that should be possible too. I'll upload the recovery.img)
You perhaps max have to create your own Odin-flashable recovery similar to the following (again, I assume no liability at all!):
- take a .tar.md5 as starting point, and unpack it (it's just a tar with a checksum appended)
- replace the recovery.img
- create a new tar file x.tar (name it as you like)
- (cat x.tar; md5sum x.tar) >x.tar.md5
- Odin flash that
I admit it becomes more and more difficult to keep the necessary tools, files, and instructions available and in shape for devices as old as this one (I'm still confused by the "KERNEL3" series.)
---------- Post added at 09:22 AM ---------- Previous post was at 09:00 AM ----------
Quick addendum: there's a new, stagefright-fixed cm11 available for callisto, see http://forum.xda-developers.com/showthread.php?t=2453085&page=27 - which is currently being debugged but looks promising (see page 29 of that thread)
---------- Post added at 10:09 AM ---------- Previous post was at 09:22 AM ----------
It seems that there's a lot of stuff still around if you search for the "galaxy-551" tag.
Bebek's GD might also be interesting (with Odin, CWM5, and more, but stopping at Gingerbread): https://docs.google.com/folderview?...SURkMEE&tid=0B-QaRW7SLPQPTHpaQXR5b1ZVMHc#list
1
bro help
thx for sharing
steve8x8 said:
OK; here you go. That's what I found on my disk. No checksums, so you got to trust me, or unpack and inspect everything. (Perhaps someone else can confirm?)
https://drive.google.com/folderview...hrbmxzZFUwdTd0N1RSdTN4OHI1VzhsVlk&usp=sharing
Click to expand...
Click to collapse
Please don't remove those files from gdrive!:good:
Danke sehr
I didn't plan to, and indeed they are still there. Is there anyone using a Callisto running CM11?
Last night I had a dream: There was a recent ROM upgrade for the Callisto (not sure whether Nougat or Oreo), and I had started to dig out all the old instructions and notes to make it happen.
Only in the morning, after having a big mug of coffee, I realized it was only a dream :'(
armv6 ghosts haunting...
First: I am not a developer but I like to cook so I thought to share with you the modified version by me for Le 1 Pro/Le Max CN cyanogenmod14 7.1 ROM find on LeEco.Re by RoyalCasin (THANK YOU FOR SHARING!)
The ROM is tested on CN version but maybe it works also on US version because it not contain any modem/radio or other additional parts for other partition then system and boot. TRY IT ON YOUR OWN RISK!...but share with us your experience to get thinks better.
It has some htc flavor: contains Blenkfeed ant trebouchet.
CREDITS:
1. Pan Youjie (screen name Flour Mo) - for developing and sharing the base CM14.1 ROM for LeTV 800+ - BIG THANKS!
2. RoyalCasino - to share the base ROM on LeEco.re,
3. CM 14.1 community (now LineageOS community), especially Oneplus2 CM14.1/LineageOS from where I get some inspirations and files,
4. All XDA community who makes this sharing be possible and enjoy a lot of peoples with community work.
THANK YOU ALL!
Install in TWRP
1. Delete cashe, system, dalvick, data
2. Instal ROM
3. delete cashe and dalvick
4. let device to boot up...first boot can take up to 5-6 min!.
5. Enjoy!
Bugs:
1. Bluetooth not work - solved in ian.03.2017 update - link below
2. Camera sometimes work sometimes not. BUT OPEN CAMERA WORK!!!!
3. Some large vidget (like clock-wether widget from htc - can be selected just if you are in smalest descktop size.
After you positioned you can come back to default descktop size - but not greater.
4. And a few more maybe....
DOWNOAD:
http://www.mediafire.com/file/jsc5q4w6pe4j5om/CM14_NOUGAT711_ABM30_31dec2016-OPONEW-10.zip
UPDATE on 2017ian03: Bluetooth WORK!
http://www.mediafire.com/file/45w0xqpuljljy8t/CM14_NOUGAT711_ABM30_03.ian.2016-BT.zip
UPDATE on 2017ian06:
- no htc stuff
- Cianogenmod SNAP camera changed with google camera (open camera remain)
- improved GPS
http://www.mediafire.com/file/a1m3jagwj7vn11k/X800_CM141_ABM30_6ian2017-nohtc.zip
UPDATE on 2017ian12:
- updated to LineageOS - ported from Oneplus 2-vers. from 11ian2017
- added asserts for X900 - I hope it boot up also on Max1! - need to be cheked
- added fingerprint for X900 - need to be cheked if it works
- snap camera still in for testing purposes.
[URL=http://www.mediafire.com/view/tgz2r7xi1473g1m/Fingerprint.jpg]
[/URL]
link below
http://www.mediafire.com/file/t2pzgxzz2gnoqte/X800_LinOS711_12ian17-07.zip
INSTALLING NOTE!
Skip the wifi connection and phone connection to avoid introducing account during setup. it can stuck on setup!
In case go back and forget any wifi connected...
16IAN2017 - PATCH for data signal not comming back after closing WIFI:
http://www.mediafire.com/file/9artd21a5avpble/Le_1_Pro_WCNSS_cfg.zip
INSTALLING: Go in TWRP, wipe cache and Dalvik/ART, install Le 1 Pro WCNSS_cfg.zip, wipe again cache and Dalvik/art > REBOOT.
I will include the patch in next update.
UPDATE on 2017ian18
Details in post 94/pg 10
link:
Mega.nz link https://mega.nz/#!RgUiCKLD!Yb5ISccbs4a0D66rC3wOyGSa6rMld5zgsMpEdPj1Mkk
Mediafire link: http://www.mediafire.com/file/cq0v5a4gff4c8vl/X800_Lineage_mod_18ian17-008.zip
Update on 2017feb04:
Mega: https://mega.nz/#!Yg1h0AZS!CaIKey9-TPS1FbnqsXZpmxqfSXSyhVY8dtzMDmRKr6g
Mediafire: http://www.mediafire.com/file/wa5zdimckm5kg1o/X800_LOS141_04-feb17-04.zip
- Live display works, all options, including color calibration
- AudioFX changed with Dolby
- LineageOS updated from ported OnePLUS2
- some improvement on phone connectivity
Still not working: wifi tethering and screen cast and IR Blaster
NEW Update on 2017aug14:
!!!!!!-New build ported from Oneplus 2: Resurection Remix 5.8.4.[7.1.2] by nicesoni_ash - THANK YOU nicesoni_ash!-!!!!!!
- It has no GAPPS in, so if you need install OPEN GAPPS NANO, last version, right after ROM FLASH!
- ROM is not rooted! You can install Magisk 13.3 if you think.
http://www.mediafire.com/file/ftkgonoyfoi3fg5/X800_RR584_CN_14aug17_ABM30-09W.zip
--- bugs ---
1 - Tethering not working (without a new kernel it won't I think)
2 - IR blaster is starting after 3 atempts but is not working.
3 - for flash to synchronize: in open camera settings enable the USE CAMERA 2 API and in Photo settings enable USE ALTERNATIVE FLASH METHOD.
NEW Update on 2017sep09:
1- Kernel is compiled from Pan Youjie (Flour_Mo - THANK YOU AGAIN!) source code, based on original 26s kernel config with some improvements, rpfilter activated for tethering to work.
2- WIFI MODULE WAS RECOMPILED FROM SOURCE
3- Rom based on RR584 ported from OnePlus 2 by nicesoni_ash.
4-tethering is working!
CN X800 Android 7.1.2 VARIANT ONLY!
http://www.mediafire.com/file/5t3i3n33e52mo51/X800_RR584_wlan_ABM30_9-sep17-04.zip
US Android 7.1.2 VARIANT ONLY (TESTING on your risck!)
http://www.mediafire.com/file/g5jrdvgcs377ew0/X800_RR584_US_wlan_ABM30_9sep17-01.zip
2and try:
http://www.mediafire.com/file/6btfaw93he4a2ia/X800_RR584_US_wlan_ABM30_9sep17-02mod.zip
Bugs: Ir Blaster not working (the files are there but is not working). Here are more info ,maybe we will find a solution together: https://forum.xda-developers.com/le-pro3/development/mod-make-infrared-blaster-3rd-party-t3511572
NEWS on 2017sep13:
MAX1 Android 7.1.2 TEST (I don't own the phone, so is not tested (TESTING on your risck!)
http://www.mediafire.com/file/gqzxzi9yf8l810k/X900_RR584-abm30_13sep17-01.zip
NEWS on 2017sep15:
New X800+ ROM with IR BLASTER WORKING!!!!!!!!
remouved on 19sep17: BT not work!
UPDATED BELOW!
Update on 2017sep19:
http://www.mediafire.com/file/r3zd31iwmaowaya/X800_CN_RR584_IR_BT-GPS-abm30_19sep17-03mod.zip
- BT, IR blaster is working now
- GPS: added config from Credomo (THANK YOU!) but need to be tested. Look for: https://forum.xda-developers.com/showpost.php?p=73849995&postcount=432
- I hope everithing else (snap camera has some FC but Open camera works)
Update on 2017oct02:
- updated to Ressurection Remix 585 with theme support!
-updated GPS also, a bit better in outside, not necessary in indoor, but lets test it a bit longer.
https://www.mediafire.com/file/9qrimxn55xprkae/X800_RR585_CN_abm30_01oct17-02LiblocOP2.zip
Update on 2017oct04:
US TEST VARIANT - DO NOT TRY ON CN MODEL!
TEST IT ON YOUR OWN RISK...BACKUP FIRST!
http://www.mediafire.com/file/wws1dc9vfyl63st/X800_US_RR584-04oct17-01.zip
Update on 2017oct08:
http://www.mediafire.com/file/ovy3k7dgj0mqzgy/X800_RR585_CN_abm30_08oct17-01gyro.zip
-Updated RR585 to oct 07 version
-Gyro config changed with new one. i hope now is working good. (not tested because I don't own VR glases)
Update on 2017nov11:
https://www.mediafire.com/file/6csmiz8zh6vwxf7/X800_CN_RR585CLEAN_11NOV17-02.zip
-Updated RR585 to oct 18 version (maybe last version before OREO! - because OnePLUS 2 version -from where I am porting - has stopped at oct18 version!)
-cleaned up sound, Dolby taken out, solved in call volume changing.
-For Dolby I put a separate DOLBY ATMOS zip here: https://www.mediafire.com/file/l5oawi6d2z7czhb/dolby.zip that can be installed via TWRP as usual.
After install allways wipe cache and Dalvik!
Screen shoots:
MAX_1 ROMs:
http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1"]http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1"]http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1
If you like my work you can donate me a coffee.
Thank you!
Has anyone tried this on the US version?
attitude12 said:
Has anyone tried this on the US version?
Click to expand...
Click to collapse
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
ABM30 said:
First: I am not a developer but I like to cook so I thought to share with you the modified version by me for Le 1 Pro/Le Max CN cyanogenmod14 7.1 ROM find on LeEco.Re by RoyalCasin (THANK YOU FOR SHARING!)
The ROM is tested on CN version but maybe it works also on US version because it not contain any modem/radio or other additional parts for other partition then system and boot. TRY IT ON YOUR OWN RISK!...but share with us your experience to get thinks better.
It has some htc flavor: contains Blenkfeed ant trebouchet.
Install in TWRP (I use 3.0.2)
1. Delete cashe, system, dalvick, data
2. Instal ROM
3. delete cashe and dalvick
4. let device to boot up...first boot can take up to 5-6 min!.
5. Enjoy!
Bugs:
1. Bluetooth not work
2. Camera sometimes work sometimes not. BUT OPEN CAMERA WORK!!!!
3. Some large vidget (like clock-wether widget from htc - can be selected just if you are in smalest descktop size.
After you positioned you can come back to default descktop size - but not greater.
4. And a few more maybe....
DOWNOAD:
http://www.mediafire.com/file/jsc5q4w6pe4j5om/CM14_NOUGAT711_ABM30_31dec2016-OPONEW-10.zip
Screen shoots:
Click to expand...
Click to collapse
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
266APP said:
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
Click to expand...
Click to collapse
First I need to thank then to you and your friend Pan Youjie for ROM, I find it on LeEco.re forum. I added a bit htc sense flavor, open camera, and take out the additional mbn files to try to make the rom compatible with US version to. I try to find working files for Bluetooth also but till now without success. (I have limited development skills, maybe your friend can Pan Youjie help us to solve also the Bluetooth issue?)
Thank you again and hope is not a problem that I modified the ROM, I give the credit to developers. Together we can do things better.
P.S. It seems that the ROM is working on US version then?!
266APP said:
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
Click to expand...
Click to collapse
OT: about the ROM, I have found it on a Chinese forum, and I shared it on leeco.re giving credits to the developer( flour mo, since his cyano ROMs was already shared there). If this may cause problems to the developer, sorry about that. ( just tell me and I will remove it).
My only intent was to improve the great job done by the developer sharing it to people who own this phone.
Has anyone tried on US version? I have US version, but I'm afraid to try because I screwd up old phone...
MasterChief2 said:
Has anyone tried on US version? I have US version, but I'm afraid to try because I screwd up old phone...
Click to expand...
Click to collapse
Doesn't work ! I deleted the mbn files and flashed the ROM. After flashing it will go into the fastboot mode.
Played also with X800 US kernels...
When you replace the Kernel with some X800 US kernels like Aurel or CrisBal (obviously not 7.1.1 versions) it will bootloop which is normal as the kernel didn't match.
So the main problem persist anyway, we need a correct Kernel for our X800 US Version !
I want to get this rom on my US version. Is there some developer that can do it for us? I am ready to do some donations if we get stable firmware. I think other phone owners can do it as well.
BetaHydri said:
Doesn't work ! I deleted the mbn files and flashed the ROM. After flashing it will go into the fastboot mode.
Played also with X800 US kernels...
When you replace the Kernel with some X800 US kernels like Aurel or CrisBal (obviously not 7.1.1 versions) it will bootloop which is normal as the kernel didn't match.
So the main problem persist anyway, we need a correct Kernel for our X800 US Version !
Click to expand...
Click to collapse
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
QCN Backup when playing with CM14.1 + kernels on X800 US
ABM30 said:
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
Click to expand...
Click to collapse
And Important Infos BTW: When some others are having in mind to play around with CM14.1 + foreign kernels:
- My above tests killed my IMIE and QCN Config.
- So important: backup your own QCN file:
--> Switch X800 US into ADB Diagnostic Mode - how:
1. adb shell
2. su
3. setprop sys.usb.config diag,adb
4. A new Qualcomm USB COM Diag Device should apear ( you have to install first the Qualcomm Drivers )
5. Open Qfil 2.7.429 or 2.7.430, Choose the Serial Qualcomm COM port from 4.
6. Click in QFIL on menu Tools and choose QCN Backup Restore
7. Make a backup from your QCN File, dont't forget to check mark Enable Multi-SIM before backup !
Cheers BetaHydri !
After installed the fixed BT version ROM, neither the Open Camera App nor the stock camera app works. I also try other camera apps from playstore, however, none of them works.
borg79 said:
After installed the fixed BT version ROM, neither the Open Camera App nor the stock camera app works. I also try other camera apps from playstore, however, none of them works.
Click to expand...
Click to collapse
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Anyone have a version of this for CN without HTC stuff but has Bluetooth working?
ABM30 said:
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Click to expand...
Click to collapse
I do perform double wipe and clean install, but there is no luck with the camera app, the screen just black out !
thejodster said:
Anyone have a version of this for CN without HTC stuff but has Bluetooth working?
Click to expand...
Click to collapse
I will do one in the next days. ....
LINK ON FIRST PAGE!
ABM30 said:
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
Click to expand...
Click to collapse
I'm glad you shared this ROM with XDA, and the developer himself agreed. We are all from China, so English is not very good, please forgive me. Are you willing to donate to developers to fix BUG faster? Such as camera. Voluntary, of course. We have opened the CM14.1 kernel source code, and we hope to develop together, such as BetaHydri, or more developers.
Kernel source:https://github.com/Silentlys/android_kernel_letv_msm8994
@BetaHydri
---------- Post added at 01:25 PM ---------- Previous post was at 01:11 PM ----------
BetaHydri said:
And Important Infos BTW: When some others are having in mind to play around with CM14.1 + foreign kernels:
- My above tests killed my IMIE and QCN Config.
- So important: backup your own QCN file:
--> Switch X800 US into ADB Diagnostic Mode - how:
1. adb shell
2. su
3. setprop sys.usb.config diag,adb
4. A new Qualcomm USB COM Diag Device should apear ( you have to install first the Qualcomm Drivers )
5. Open Qfil 2.7.429 or 2.7.430, Choose the Serial Qualcomm COM port from 4.
6. Click in QFIL on menu Tools and choose QCN Backup Restore
7. Make a backup from your QCN File, dont't forget to check mark Enable Multi-SIM before backup !
Cheers BetaHydri !
Click to expand...
Click to collapse
Nice to meet you, BetaHydri. I admire you very much, thank you for the development of a good CM12.1. I am a friend of the CM14.1 developer, we are all from China, my English may not be great, please understand. We have to open the LE1 PRO CM14.1 kernel source code, hope you can also join in development as soon as possible, repair the camera does not work, we believe that you have this ability, I also hope you join CPU/GPU overclocking and do some kernel optimization. Thank you very much。
Kernel source:https://github.com/Silentlys/android_kernel_letv_msm8994
ABM30 said:
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Click to expand...
Click to collapse
I just download your latest version and perform a clean install, the result is same as before, the camera apps doesn't work, showing just a blank screen. My phone is the LeEco Max and not the LeEco 1 Pro, I just modified the file "updater-script" and install it. I attach a log file for your reference.
borg79 said:
I just download your latest version and perform a clean install, the result is same as before, the camera apps doesn't work, showing just a blank screen. My phone is the LeEco Max and not the LeEco 1 Pro, I just modified the file "updater-script" and install it. I attach a log file for your reference.
Click to expand...
Click to collapse
Now I understood, because Max has another hardware (camera is different) some files changes/additions need to be made in the rom. I will try to make the changes necessary (also adding the fingerprint files needed for MAX), but I need your help in testing because I don't have the phone and maybe I will not succeed from the first try. I will give you a replay when I have a first variant for trying out.
Any way, good to hear that the rom boot up, the kernel is matching then.
In a day or two I'll be back!
Hi @ABM30
First of all, thank you for your effort.
I also managed to successfully flash the ROM on my Le Max x900+ after i delete the #Assert line from the "updater-script". I am glad that we have the perspective for a fully working CM 14.1.
Indeed, the Camera does not work on x900. There is also no Fingerprint, IR Blaster and NFC, but that's not a big deal for the latest two options for now. Fingerprint would be nice to have though.
I would also gladly be your tester for x900+ you have the time to develop the ROM further.
Thank you again. Best regards
Sirrr said:
Hi @ABM30
First of all, thank you for your effort.
I also managed to successfully flash the ROM on my Le Max x900+ after i delete the #Assert line from the "updater-script". I am glad that we have the perspective for a fully working CM 14.1.
Indeed, the Camera does not work on x900. There is also no Fingerprint, IR Blaster and NFC, but that's not a big deal for the latest two options for now. Fingerprint would be nice to have though.
I would also gladly be your tester for x900+ you have the time to develop the ROM further.
Thank you again. Best regards
Click to expand...
Click to collapse
OK, then the first attempt (TRY IT ON YOUR OWN RISK! on X800 wont finalize the boot proces, it stuck on Cianogen boot!):
http://www.mediafire.com/file/huzduh1592esfft/X900_CM141mod_8ian17-01.zip
It has the assert for X900 so you don't need to delete anything.
If the boot is successful then try out and tell me how it works. Thanks!
Any logcat will be useful.
########## #############
Official TWRP with prebuild Kernel is available here:
https://forum.xda-developers.com/mi-mix-2/development/recovery-twrp-3-2-1-0-xiaomi-mi-mix-2-t3780525
########################
Greetings flashaholics!
As usual before flashing this TWRP make an complete backup of your system!!!
Why another TWRP?
you'll get the latest TWRP release with most recent features & bugfixes
build live from sources - no prebuild kernels/files
more partitions to backup/restore supported
made project treble compatible by adding vendor & vendor_image partitions (leaving cust partition available for legacy purposes)
double tap to wake display
survives installation of official MIUI Global/CN ROMs (read INFO section to know how to achive that result exactly)
DOWNLOAD TWRP 3.2.3-0
... please see also supplemental infos & tool downloads below in INFO section
Please leave feedback for the beta. Does it work well? Did you encounter any problems? THX
Important changes in latest 3.2.3-0 build: 20180815-2003
based on fresh MIX 2 OmniRom base files and new msm8998 common sources - speed seems to be upgraded a little
previous changelog:
TWRP 3.2.3-0 based - build on Nextgen-Networks build environment with latest kernel 4.4.78
"FrankenTab" - mixed fstab v1 & v2 layout to achive de-/encryption and also keep as much partitions available as possible
treble compatible (by adding vendor & vendor_image partitions)
backup write speed restored (80 MB/s for file systems / 110 MB/s for imaged drives) and stayed compatible with OmniRom power/storage/kernel settings
Build completely live from latest build tree files - prebuild kernel fragments not needed anymore *yay*
en-/decryption support
ADB/MTP support
display brightness fixed - it's bright again! (see detailed notes in download section if it did not work for you)
additional partitions backup & restoreable (20 overall)
doupble tap to wake display is supported
display works when booting from LOS/OmniRom/RR to recovery via menu
survives installation of official MIUI Global/CN ROMs (OTA not tested yet)
Tested and perfectly working with ROMs as follows
MIUI 8.8.9 xiaomi.eu
MIUI 8.7.x xiaomi.eu
MIUI 8.6.x xiaomi.eu
MIUI 8.6.21 CN / xiaomi.eu
MIUI 8.6.14 Global
MIUI 8.6.8 CN
MIUI 8.5.11 Global
MIUI 8.5.8 Global / CN / xiaomi.eu
MIUI 8.5.2 Global
MIUI 8.4.26 by xiaomi.eu
LineageOS 15.1 build 20180501
OmniRom 8.1.0-20180430 HOMEMADE
INFO:
official MIUI Global/CN ROMs installation survival: dont reboot after ROM installation/update - just start a new flash session and flash latest magisk beta in a separate process - thats all! (OTA survival has not been tested by now)
If your TWRP gets constantly overwritten then flash the no-verity-opt-encrypt-1.6.zip right after your flashed TWRP to your device and right after each install/update of an original XIAOMI ROM from (en.)miui.com.
Procedure not needed for xiaomi.eu based ROMs.
Download no-verity-opt-encrypt 1.6 here
To make the flashing a little more convenient I've written a little windows script that utilizes adb/fastboot and presents all recovery images in its folder for your flashing happiness
This package also contains a script to remove/bypass the pin/passcode/pattern you've set - this could help then restoring an backup and the definitely correct pin/passcode/pattern is not accepted afterwards
Download recovery-flash.cmd 1.29 here
need an matching firmware for your device?
Download here from the Xiaomi Firmware Updater project on XDA (downloads in post 2)
Some very clarifying official information about en-/decryption types and how it works: https://source.android.com/security/encryption/
take a look here to have a full backup with internal storage covered also: [URL="https://forum.xda-developers.com/android/apps-games/app-twrp-tipatch-backup-internal-t3831217]Info & Download TiPatch[/URL]
For more detailed changelogs visit the download page.
Updated versions will be announced in this thread.
Instructions how to setup & build your own TWRP:
https://github.com/nextgen-networks/android_device_xiaomi_chiron-OMNI/blob/android-8.1_v10/README.md
Sourcecode (updated 2018-08-15 / v13):
Modified TWRP: https://github.com/nextgen-networks/android_bootable_recovery
Device-Tree (Device): https://github.com/nextgen-networks/android_device_xiaomi_chiron-OMNI
Device-Tree (SOC): https://github.com/nextgen-networks/android_device_xiaomi_msm8998-common
Kernel: https://github.com/omnirom/android_kernel_xiaomi_msm8998
Vendor-Tree (Device/SOC): https://github.com/DonkeyCoyote/proprietary_vendor_xiaomi
Thanks, works great so far.
As mentioned in the Lineage thread I intend to you encryption, neither the MIUI nor the iceman TWRP recoveries manage to mount my encrypted LineageOS storage, they just fail after the prompt.
Under this recovery I don't get a prompt.
Just wanted to mention, I will use it and test it anyway if encryption is not working yet, I will manage somehow.
Iam on Lineage. But after flashing TWRP not starting, only the fastboot mode
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
https://www.nextgen-networks.de/de/...17-twrp-recovery-3-2-1-0-universal-build.html
It this the right Recovery?
Feenfleisch said:
Iam on Lineage. But after flashing TWRP not starting, only the fastboot mode
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
https://www.nextgen-networks.de/de/...17-twrp-recovery-3-2-1-0-universal-build.html
It this the right Revolver?
Click to expand...
Click to collapse
Hey @Feenfleisch,
yes it is the correct link.
What exact commands did you use to flash TWRP?
Did the device does not boot at all or only when booting to recovery?
Only then ist booting recovery. Ich flash with Flashify
---------- Post added at 07:02 PM ---------- Previous post was at 06:57 PM ----------
The TWRP fromm the last link work (twrp-3.2.1-0-chiron_raupe-20180104-1520.img), the TWRP from your first Link not work. Maybay the wrong link?
Feenfleisch said:
Only then ist booting recovery. Ich flash with Flashify
---------- Post added at 07:02 PM ---------- Previous post was at 06:57 PM ----------
The TWRP fromm the last link work (twrp-3.2.1-0-chiron_raupe-20180104-1520.img), the TWRP from your first Link not work. Maybay the wrong link?
Click to expand...
Click to collapse
Uuuuuuups
Link leaded to Mi MIX instead of Mi MIX 2 download.
I fixed that ...
Thanks for the hint.
I've heard about several issues with flashify - better use fastboot.
USB MTP/ADB Sideload does not seem to work for me. IceMan's TWRP does.
Uploading to Google drive latest release
https://drive.google.com/file/d/1egaT1P66oEc1M0_S-tNXjG43nTLCDr3z/view?usp=drivesdk
DaCoolX said:
USB MTP/ADB Sideload does not seem to work for me. IceMan's TWRP does.
Click to expand...
Click to collapse
I'll investigate that (expect an update for this issue next week).
Thanks for reporting!
allrockedout said:
Downloads taking like 20 minutes I'll upload it to Google drive when done....
https://drive.google.com/file/d/1szvkblRyxxcVqVSqu7ejxhIkd07SUIqD/view?usp=drivesdk
Click to expand...
Click to collapse
... hmm this is very unusual - tested the speed to server and it took me a couple of seconds.
If you host the file as mirror please keep an eye for updated versions in future.
raupe said:
... hmm this is very unusual - tested the speed to server and it took me a couple of seconds.
If you host the file as mirror please keep an eye for updated versions in future.
Click to expand...
Click to collapse
Yeah I'll keep it updated of course. Plan on keeping this phone for a while. So I flashed twrp 3.2.1-0 image in twrp rebooted back into twrp..now my file storage is encrypted again. So I'll have to wipe data again... Ugh ok I'll test it out.
Cheers - downloading now.
This is vanilla TWRP right? Tired of seeing different themes, Chinese or other "customizations" in other TWRPs.
Sent from Xiaomi Mi Mix 2 @ LineageOS 14.1
I had to flash back to epic twrp. Couldn't remove encyption. After wiping data and rebooting to system than back to twrp. Everything was encrypted.
AndyYan said:
Cheers - downloading now.
This is vanilla TWRP right? Tired of seeing different themes, Chinese or other "customizations" in other TWRPs.
Sent from Xiaomi Mi Mix 2 @ LineageOS 14.1
Click to expand...
Click to collapse
Jepp this is stock/vanilla TWRP.
The only change i've made was to activate NTFS support some Qualcom specific stuff and disable the annoying "mouse" cursor that is present on default builds.
As you can read in comments (here and in Mi MIX forum) there are some hick-hacks with encryption.
This take a more deep dive because of the huge amount of variants the encryption has made from (a.k.a.: every OS build of MIUI/LOS/RR/Epic/mi-globe may use an different approach/driver for encryption).
There seems to be an problem with software and hardware encryption that conflicts with each other (see LineageOS change id 199842)
allrockedout said:
I had to flash back to epic twrp. Couldn't remove encyption. After wiping data and rebooting to system than back to twrp. Everything was encrypted.
Click to expand...
Click to collapse
Greetings @allrockedout!
Thanks for your report!
Just to figure out what leads to this behavior - could you give some information about your current firmware version, build date of the epic rom you used and what kernel the device info states?
Thanks in advance!
raupe said:
Greetings @allrockedout!
Thanks for your report!
Just to figure out what leads to this behavior - could you give some information about your current firmware version, build date of the epic rom you used and what kernel the device info states?
Thanks in advance!
Click to expand...
Click to collapse
I'm on Global Developer beta
Greetings readers!
I've build a new version today that contains some different en-/decryption libraries.
Please give it a shot and as always: Feedback is very welcome
Download: https://www.nextgen-networks.de/de/downloads/category/15-xiaomi-mi-mix-2.html
For those with touchscreen issues:
There have been made no kernel changes so dont expect any changes here.
is it suit for oreo cause my mix2 already update to 8.0, developer edition
ShawnLukeLee said:
is it suit for oreo cause my mix2 already update to 8.0, developer edition
Click to expand...
Click to collapse
Will be fine
ShawnLukeLee said:
is it suit for oreo cause my mix2 already update to 8.0, developer edition
Click to expand...
Click to collapse
Jipp, should work with 8.0/8.1 - sources used for building are 8.1 based.
I can give more detailed feedback if I'm selected for XIAOMI Android 8 global dev ROM next week.
Hi all!
I am NFound. I came to you from a branch ZTE Axon 7, now I will be with you :cyclops:
TWRP 3.2.3-3 by NFound​
The main differences:
- Go to the latest Android 8.1.0 sources
- Full support for treble-roms
- Integrated my theme Nubia Red
- Backups are saved to the folder Nubia_Z17S
- Added the item "Resetting passwords"
- Added point on / off "Flashlight"
- Add backup /persist
- Minor edits navigation menu
- Packaged in an .exe file, the program will automatically unlock the bootloader and will flush the TWRP
Installation instructions: video instruction
Source-code:
Device
TWRP
Download
Thanks dude. Appreciate the work. Frustrating that there is no developers for the z17s. Is porting the z17 oreo official rom to z17s something that is possible?
devast8ndiscodave said:
Thanks dude. Appreciate the work. Frustrating that there is no developers for the z17s. Is porting the z17 oreo official rom to z17s something that is possible?
Click to expand...
Click to collapse
Hello! I'll see what i can do
NFound said:
Hello! I'll see what i can do
Click to expand...
Click to collapse
Can this also use on a z17 ?
aljoscha81 said:
Can this also use on a z17 ?
Click to expand...
Click to collapse
No, only Z17S
TWRP 3.2.3-2:
- Delete flag wipeui EFS and USB
NFound said:
No, only Z17S
TWRP 3.2.3-2:
- Delete flag wipeui EFS and USB
Click to expand...
Click to collapse
I ve test it on z17 and it is booting can you maybe easy compile it also for z17 that would be great cause we don't got a fully treble compatible recovery but we got a trebelized rom the mokee 81 or maybe you can guide me how to compile for z17
Preview AOSP Extended 8.1.0 FULL TREBLE on Nubia Z17S
it would be great to see for z17 nx563j too
Yes that would be very nice cause i think the only dev for treble we got on the mokee team is also gone there are long time no updates and we are there with a treble rom what is very cool many thanks so far but for a fully useable rom we need more updated vendor image for example i think i am able to boot android 9 pie aosp and pixel expirience too but with many bugs and we got no fully working treble twrp
But once again this twrp is for z17s right ?but i am able to boot it on z17 8gb128gb too and use it without problems so far touch working etc. .....
Will test it a bit longer want to make a clean install of latest mokee 81 now will report later if it work with this recovery!
NFound said:
Preview AOSP Extended 8.1.0 FULL TREBLE on Nubia Z17S
Click to expand...
Click to collapse
Finally some activity for the Z17S This Treble Rom is looking great. Is it already possible to download this rom?
Hi, thread name now says NX563J, too. No comments here and no info in your initial post about it. Does it work now for the Z17??
Update the recovery works also on nx563j superb thanks very much
NFound said:
Hello! I'll see what i can do
Click to expand...
Click to collapse
Thanks a lot the recovery is amazing im running a treble enabled 9 rom for now if you want to test for me is everything working after some user give me a hint how to solve the sound bug when you want to test here is the thread where the procedur is written
https://forum.xda-developers.com/pr...device-development/gsi-arrowos-t3835111/page5
It is in the last post
aljoscha81 said:
Thanks a lot the recovery is amazing im running a treble enabled 9 rom for now if you want to test for me is everything working after some user give me a hint how to solve the sound bug when you want to test here is the thread where the procedur is written
https://forum.xda-developers.com/pr...device-development/gsi-arrowos-t3835111/page5
It is in the last post
Click to expand...
Click to collapse
Which rom are you running now?
Update to 3.2.3-3:
- Added the ability to clean OTG-drives
- Flashlight now activates / deactivates 2 LEDs at once
- In the reboot menu, the boot loader signing and disabling encrypt on stock 7.x roms
- Added .sh script so that TWRP does not fly off after reboot to system
- Modified the theme
Download
Thanks again for this. Running android 9 now on my z17s. Much appreciated.
TWRP is very good. I have a small request to add Chinese because my English is not very good (I basically use Google Translate)
Hello,
I tried by many way to flash the recovery but It reboot in fastboot saying "no kernel (boot partition is bad)". So I flashed back my old recovery and I'm stuck here.
I've also tried the .exe and it stuck with a "waiting for devices"
Can someone help me ? My project was to flash the @NFound treble base and install Pixel Experience 9.0.
Thank you for your future responce
Jep found some system do not can hang in errors but you know maybe the wrong turn .....i found out better do never restore vendor .img but only vendor for this recovery is ......still working
---------- Post added at 12:23 AM ---------- Previous post was at 12:22 AM ----------
I am on patched vendor
Got do that by myself but this vendor img is flashable and good still don't know what rro.apk works better in vendor but this used from original thresd latest in 1.2 or so and i am on from the 15.1 lineage one. ....
Sry man but this man does the .img is cool cause he owned a z17s but vendor worked with old kernel
---------- Post added at 12:34 AM ---------- Previous post was at 12:31 AM ----------
Do you can install latest gsi withit?
---------- Post added at 12:42 AM ---------- Previous post was at 12:34 AM ----------
You all don't ever try out mod kernel ? Do got faster charge.....?the device is also qc3 or?
---------- Post added at 12:49 AM ---------- Previous post was at 12:42 AM ----------
I own only z17 not s version but the dev had a 1.3 version but so not for nx563j make that a difference?......
---------- Post added at 12:50 AM ---------- Previous post was at 12:49 AM ----------
So it's for gsi......
---------- Post added at 12:58 AM ---------- Previous post was at 12:50 AM ----------
Omg this device got double front cam right that runs me out of knowledge **** i own a biT Of NoThing!........................!
Disclaimer:
LineageOS is a free and open-source operating system based on the Android mobile platform. Modifying your device and installing this ROM might cause undesired behavior. You do this at your own risk and under your own responsibility.
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on z3
Download link:
LineageOS Downloads for z3
Recommended Google Apps package:
Open GApps (choose ARM as Platform and 9.0 as Android, use the variant you want. Recommended package: nano)
Recommended TWRP Recovery
TWRP build by The Muppets (Updated build: 12Feb2020)
Official root addon
LineageOS Extras
Changelog:
Changes for z3
Bug reports:
How to submit a bug report
LineageOS GitLab
Donate to support development:
Donate via PayPal to NeoArian *** Our main contributor for LineageOS 16 & 17 for Z3 and Z3 Compact ***
Donate via PayPal to LineageOS
Thanksgiving
Thanks to everyone who ever contributed to the custom developement for this device.
Especially:
@nailyk
@rcstar6696
@Myself5
@tomascus
@Diewi
@xkeita
@koron393
@SpiritCroc
@115ek
@drakonizer
Source Code
The source code of LineageOS is available here.
The kernel source code for this device is available here.
The used configuration is lineageos_shinano_leo_defconfig available at arch/arm/configs/lineageos_shinano_leo_defconfig in the kernel source.
XDA:DevDB Information
LineageOS 16.0 for Xperia Z3, ROM for the Sony Xperia Z3
Contributors
Mr.Tom_Tom, NeoArian
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 23.5.A.1.291
Based On: LineageOS
Version Information
Status: Nightly
Created 2020-02-07
Last Updated 2020-02-07
Remarks, Questions and Answers
Known Major Issues
Audio quality during voice calls: Voice calls in handset mode are still too loud. Resolved with lineage-16.0-20200210-nightly-z3
FM Radio buggy: Slow scanning, FM radio is not always starting correctly. We are not working on that right now. Workaround: Let the phone do the initial scan for ~30 min or so, than you can use it.
WiFi issues (low (?) speed @ 5GHz, hotspot): This topic is related to a dirty workaround. We are aware of the issue (since years) but don't have a better solution atm.
Disk Encryption: Disk Encryption is working, however not with the default password (no password). Workaround: Set password first, then start disk encryption, not the other way round!
VOIP: Mic not working when on hands-free mode. Affected apps e.g. WhatsApp, Google Duo, Skype. Work-around:
Modify file /system/vendor/etc/audio_effects.xml according to this change (delete two lines).
You need write access to /system. I recommend using ADB during TWRP recovery mode to perform that. You need to mount /system beforehand in TWRP.
This disables the default Echo Compensation and Noise Suppression effects. With the current setup, they are not working anyways (NS/AEC is handled differently). This does not affect normal voice calls, as they are not used for voice-calls anyways.
Bluetooth Low Power may create wakelocks in certain scenarios. Not yet tested that myself, but seems to affect the whole shinano family since a long time already.
Thermal throttling of CPU cores: Due to a design issue of the thermal manager ("Thermanager") when used with older kernels like ours you have to expect that the frequency throttling of the CPU cores may fail, especially after(!) the device was getting hot and is recovering. This may lead to performance issues until reboot and other issues. Workaround: reboot device after heavy use. This issue seems to be present since years with our open source custom ROMs.
GNSS: GLONASS and BEIDOU not working correctly --> will be fixed with LOS17.1
You tell us (with logs please)...
More detailed test log here
Further hints
If you need Google Apps we recommend the "nano" package, however, I personally use the "stock" package which works as well.
If you need to install a lot of apps you may run out of internal DATA storage capacity, especially if you install one of the larger GAPPS packages. These apps are initially placed on the system partition and do not cost you DATA capacity. However, every update which comes over the Play Store then fills up your data partition. Using an SD card formated as "external" storage does not help you much (unless you use a tool like app2sd which is no more recommended) and isn't encrypted. Formating the SD card as "adoptable storage" comes with the drawback that some apps do not allow to be migrated to this storage, and unfortunately this is true for some streaming music/video apps which need to store a lot of data obviously (for offline use). The solution I am using is to partition a SD card as "mixed", which gives you the possibility to offload at least some apps to adoptable storage while you still have a classical external FAT32 partition where e.g. your streaming app can save its offline files:
Find a large (I tested a 400GB microSDXC card) and fast ("A1" or higher) Micro SD card.
Follow this guide to partition your SD card. Note: all data on the card will be lost.
Restart your phone.
When you are notified that a new storage card has been detected, use it as "external". (Your internal partition has been recognized at that point already and does not need interaction.)
Go to settings / Storage. Verify that you see three entries: 1. Your internal phone storage of 16GB. This includes your SYSTEM partition. 2. Your SD card with an SD card symbol. The size shown should be the full capacity of the card. If you click on it, your "external" partition is shown (misleading) as "System" and blocked. Click on migrate data to migrate all possible apps to your adoptable storage. 3. Your sd card partition formated as mobile storage (unencrypted!).
How to create logs:
Follow How To Logcat
If your device randomly reboots:
Go to Settings -> System -> Advanced -> Developer options -> Store logger data persistently on device. After the reboot occured: Pull the logs from /data/misc/logd/ (root required).
If your device crashes during boot and reboots to recovery:
Code:
adb pull /proc/last_kmsg
Please submit logs from clean systems without "Exposed" or similar modifications in place
Your feedback is wanted
Details on any WiFi issues - please state your country & used frequency channels (if possible). Please test and report if the situation gets better with the MAGISK module linked below.
A big THANK YOU also to @ronnay ryukay for having maintained the inofficial thread!
Reserved
reserved.
Great job my friend, congrats
Sent from my Xperia Z3 using Tapatalk
Great job my friend, congrats [emoji4]
Sent from my Xperia Z3 using Tapatalk
thx
@MrTom_Tom @NeoArian
It's so great to see an official LineageOS 16 for the old device. Thx so much at both of you for the effort and time which you spending to the z3.
Hopefully the LineageOS 17.1 will go official some day, too.
dhacke said:
@MrTom_Tom @NeoArian
It's so great to see an official LineageOS 16 for the old device. Thx so much at both of you for the effort and time which you spending to the z3.
Hopefully the LineageOS 17.1 will go official some day, too.
Click to expand...
Click to collapse
You are welcome. LineageOS 17.1 is in a pretty good shape for z3/z3c. I have built an unofficial version for z3 with February security patch and uploaded it to https://osdn.net/projects/ephedraceae/storage/z3/lineage-17.1/
It should be in a similar state to 16.0 now. Selinux is enforcing and everything should be working so far.
My cam shows blackscreen! Plesse help
Sent from my [device_name] using XDA-Developers Legacy app
santeria27 said:
My cam shows blackscreen! Plesse help
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
First install only flash rom with gapps only, dont with magisk, after first boot you can flash magisk
Sent from my Xperia Z3 using Tapatalk
---------- Post added at 01:19 PM ---------- Previous post was at 01:12 PM ----------
NeoArian said:
You are welcome. LineageOS 17.1 is in a pretty good shape for z3/z3c. I have built an unofficial version for z3 with February security patch and uploaded it to https://osdn.net/projects/ephedraceae/storage/z3/lineage-17.1/
It should be in a similar state to 16.0 now. Selinux is enforcing and everything should be working so far.
Click to expand...
Click to collapse
Where new twrp for los17.1?
Sent from my Xperia Z3 using Tapatalk
ronnay ryukay said:
First install only flash rom with gapps only, dont with magisk, after first boot you can flash magisk
Sent from my Xperia Z3 using Tapatalk
---------- Post added at 01:19 PM ---------- Previous post was at 01:12 PM ----------
Where new twrp for los17.1?
Sent from my Xperia Z3 using Tapatalk
Click to expand...
Click to collapse
THX it works now [emoji2]
Sent from my [device_name] using XDA-Developers Legacy app
santeria27 said:
THX it works now [emoji2]
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Your wellcome..
Sent from my Xperia Z3 using Tapatalk
NeoArian said:
You are welcome. LineageOS 17.1 is in a pretty good shape for z3/z3c. I have built an unofficial version for z3 with February security patch and uploaded it to https://osdn.net/projects/ephedraceae/storage/z3/lineage-17.1/
It should be in a similar state to 16.0 now. Selinux is enforcing and everything should be working so far.
Click to expand...
Click to collapse
Nice work.
Does it mean we will get official here, too?
dhacke said:
Nice work.
Does it mean we will get official here, too?
Click to expand...
Click to collapse
We can't promise anything, I will give my best.
ronnay ryukay said:
First install only flash rom with gapps only, dont with magisk, after first boot you can flash magisk
Sent from my Xperia Z3 using Tapatalk
---------- Post added at 01:19 PM ---------- Previous post was at 01:12 PM ----------
Where new twrp for los17.1?
Click to expand...
Click to collapse
You can either use older TWRP builds or my compiled lineage recovery: https://osdn.net/projects/ephedraceae/storage/z3/recovery/
Hi, can I use this ROM on Z3 Dual D6633?
Z3 Dual D6633
vito45 said:
Hi, can I use this ROM on Z3 Dual D6633?
Click to expand...
Click to collapse
Unfortunately no. I don't have experience with the dual SIM device yet, so I am unable to take care of that.
BUG?
Hey, I have had this bug for a long time now but here I'm presenting it to you guys for some assistance.
When I have used my phone for a while without restarting; I can't move the apps on home screen or in the app drawer meaning that I can't uninstall them from home/app drawer. I can confirm this is working for me on STOCK ROM (Marshmallow 6.1).
If I reboot or force stop the launcher it gets back to normal and works as nothing happened. I use the official TREBUCHET
The log was too big so that's why I compressed it using .ZIP
Itroublve said:
I can't move the apps on home screen or in the app drawer meaning that I can't uninstall them from home/app drawer. I can confirm this is working for me on STOCK ROM (Marshmallow 6.1).
If I reboot or force stop the launcher it gets back to normal and works as nothing happened. I use the official TREBUCHET
Click to expand...
Click to collapse
Hi, thanks for providing a log file. What ROM version are you using? What do you mean by I can't move the apps [...] in the drawer?
Mr.Tom_Tom said:
Hi, thanks for providing a log file. What ROM version are you using? What do you mean by I can't move the apps [...] in the drawer?
Click to expand...
Click to collapse
I'm using the LOS16 20200210, and I mean that I can't drag the apps to home screen from app drawer. I will make a unlisted video and link it here or something when it happens again. Will probably happen soon
Edit: here is the link (demo) of the bug...
thanks
amazing rom