First: I am not a developer but I like to cook so I thought to share with you the modified version by me for Le 1 Pro/Le Max CN cyanogenmod14 7.1 ROM find on LeEco.Re by RoyalCasin (THANK YOU FOR SHARING!)
The ROM is tested on CN version but maybe it works also on US version because it not contain any modem/radio or other additional parts for other partition then system and boot. TRY IT ON YOUR OWN RISK!...but share with us your experience to get thinks better.
It has some htc flavor: contains Blenkfeed ant trebouchet.
CREDITS:
1. Pan Youjie (screen name Flour Mo) - for developing and sharing the base CM14.1 ROM for LeTV 800+ - BIG THANKS!
2. RoyalCasino - to share the base ROM on LeEco.re,
3. CM 14.1 community (now LineageOS community), especially Oneplus2 CM14.1/LineageOS from where I get some inspirations and files,
4. All XDA community who makes this sharing be possible and enjoy a lot of peoples with community work.
THANK YOU ALL!
Install in TWRP
1. Delete cashe, system, dalvick, data
2. Instal ROM
3. delete cashe and dalvick
4. let device to boot up...first boot can take up to 5-6 min!.
5. Enjoy!
Bugs:
1. Bluetooth not work - solved in ian.03.2017 update - link below
2. Camera sometimes work sometimes not. BUT OPEN CAMERA WORK!!!!
3. Some large vidget (like clock-wether widget from htc - can be selected just if you are in smalest descktop size.
After you positioned you can come back to default descktop size - but not greater.
4. And a few more maybe....
DOWNOAD:
http://www.mediafire.com/file/jsc5q4w6pe4j5om/CM14_NOUGAT711_ABM30_31dec2016-OPONEW-10.zip
UPDATE on 2017ian03: Bluetooth WORK!
http://www.mediafire.com/file/45w0xqpuljljy8t/CM14_NOUGAT711_ABM30_03.ian.2016-BT.zip
UPDATE on 2017ian06:
- no htc stuff
- Cianogenmod SNAP camera changed with google camera (open camera remain)
- improved GPS
http://www.mediafire.com/file/a1m3jagwj7vn11k/X800_CM141_ABM30_6ian2017-nohtc.zip
UPDATE on 2017ian12:
- updated to LineageOS - ported from Oneplus 2-vers. from 11ian2017
- added asserts for X900 - I hope it boot up also on Max1! - need to be cheked
- added fingerprint for X900 - need to be cheked if it works
- snap camera still in for testing purposes.
[URL=http://www.mediafire.com/view/tgz2r7xi1473g1m/Fingerprint.jpg]
[/URL]
link below
http://www.mediafire.com/file/t2pzgxzz2gnoqte/X800_LinOS711_12ian17-07.zip
INSTALLING NOTE!
Skip the wifi connection and phone connection to avoid introducing account during setup. it can stuck on setup!
In case go back and forget any wifi connected...
16IAN2017 - PATCH for data signal not comming back after closing WIFI:
http://www.mediafire.com/file/9artd21a5avpble/Le_1_Pro_WCNSS_cfg.zip
INSTALLING: Go in TWRP, wipe cache and Dalvik/ART, install Le 1 Pro WCNSS_cfg.zip, wipe again cache and Dalvik/art > REBOOT.
I will include the patch in next update.
UPDATE on 2017ian18
Details in post 94/pg 10
link:
Mega.nz link https://mega.nz/#!RgUiCKLD!Yb5ISccbs4a0D66rC3wOyGSa6rMld5zgsMpEdPj1Mkk
Mediafire link: http://www.mediafire.com/file/cq0v5a4gff4c8vl/X800_Lineage_mod_18ian17-008.zip
Update on 2017feb04:
Mega: https://mega.nz/#!Yg1h0AZS!CaIKey9-TPS1FbnqsXZpmxqfSXSyhVY8dtzMDmRKr6g
Mediafire: http://www.mediafire.com/file/wa5zdimckm5kg1o/X800_LOS141_04-feb17-04.zip
- Live display works, all options, including color calibration
- AudioFX changed with Dolby
- LineageOS updated from ported OnePLUS2
- some improvement on phone connectivity
Still not working: wifi tethering and screen cast and IR Blaster
NEW Update on 2017aug14:
!!!!!!-New build ported from Oneplus 2: Resurection Remix 5.8.4.[7.1.2] by nicesoni_ash - THANK YOU nicesoni_ash!-!!!!!!
- It has no GAPPS in, so if you need install OPEN GAPPS NANO, last version, right after ROM FLASH!
- ROM is not rooted! You can install Magisk 13.3 if you think.
http://www.mediafire.com/file/ftkgonoyfoi3fg5/X800_RR584_CN_14aug17_ABM30-09W.zip
--- bugs ---
1 - Tethering not working (without a new kernel it won't I think)
2 - IR blaster is starting after 3 atempts but is not working.
3 - for flash to synchronize: in open camera settings enable the USE CAMERA 2 API and in Photo settings enable USE ALTERNATIVE FLASH METHOD.
NEW Update on 2017sep09:
1- Kernel is compiled from Pan Youjie (Flour_Mo - THANK YOU AGAIN!) source code, based on original 26s kernel config with some improvements, rpfilter activated for tethering to work.
2- WIFI MODULE WAS RECOMPILED FROM SOURCE
3- Rom based on RR584 ported from OnePlus 2 by nicesoni_ash.
4-tethering is working!
CN X800 Android 7.1.2 VARIANT ONLY!
http://www.mediafire.com/file/5t3i3n33e52mo51/X800_RR584_wlan_ABM30_9-sep17-04.zip
US Android 7.1.2 VARIANT ONLY (TESTING on your risck!)
http://www.mediafire.com/file/g5jrdvgcs377ew0/X800_RR584_US_wlan_ABM30_9sep17-01.zip
2and try:
http://www.mediafire.com/file/6btfaw93he4a2ia/X800_RR584_US_wlan_ABM30_9sep17-02mod.zip
Bugs: Ir Blaster not working (the files are there but is not working). Here are more info ,maybe we will find a solution together: https://forum.xda-developers.com/le-pro3/development/mod-make-infrared-blaster-3rd-party-t3511572
NEWS on 2017sep13:
MAX1 Android 7.1.2 TEST (I don't own the phone, so is not tested (TESTING on your risck!)
http://www.mediafire.com/file/gqzxzi9yf8l810k/X900_RR584-abm30_13sep17-01.zip
NEWS on 2017sep15:
New X800+ ROM with IR BLASTER WORKING!!!!!!!!
remouved on 19sep17: BT not work!
UPDATED BELOW!
Update on 2017sep19:
http://www.mediafire.com/file/r3zd31iwmaowaya/X800_CN_RR584_IR_BT-GPS-abm30_19sep17-03mod.zip
- BT, IR blaster is working now
- GPS: added config from Credomo (THANK YOU!) but need to be tested. Look for: https://forum.xda-developers.com/showpost.php?p=73849995&postcount=432
- I hope everithing else (snap camera has some FC but Open camera works)
Update on 2017oct02:
- updated to Ressurection Remix 585 with theme support!
-updated GPS also, a bit better in outside, not necessary in indoor, but lets test it a bit longer.
https://www.mediafire.com/file/9qrimxn55xprkae/X800_RR585_CN_abm30_01oct17-02LiblocOP2.zip
Update on 2017oct04:
US TEST VARIANT - DO NOT TRY ON CN MODEL!
TEST IT ON YOUR OWN RISK...BACKUP FIRST!
http://www.mediafire.com/file/wws1dc9vfyl63st/X800_US_RR584-04oct17-01.zip
Update on 2017oct08:
http://www.mediafire.com/file/ovy3k7dgj0mqzgy/X800_RR585_CN_abm30_08oct17-01gyro.zip
-Updated RR585 to oct 07 version
-Gyro config changed with new one. i hope now is working good. (not tested because I don't own VR glases)
Update on 2017nov11:
https://www.mediafire.com/file/6csmiz8zh6vwxf7/X800_CN_RR585CLEAN_11NOV17-02.zip
-Updated RR585 to oct 18 version (maybe last version before OREO! - because OnePLUS 2 version -from where I am porting - has stopped at oct18 version!)
-cleaned up sound, Dolby taken out, solved in call volume changing.
-For Dolby I put a separate DOLBY ATMOS zip here: https://www.mediafire.com/file/l5oawi6d2z7czhb/dolby.zip that can be installed via TWRP as usual.
After install allways wipe cache and Dalvik!
Screen shoots:
MAX_1 ROMs:
http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1"]http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1"]http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1
If you like my work you can donate me a coffee.
Thank you!
Has anyone tried this on the US version?
attitude12 said:
Has anyone tried this on the US version?
Click to expand...
Click to collapse
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
ABM30 said:
First: I am not a developer but I like to cook so I thought to share with you the modified version by me for Le 1 Pro/Le Max CN cyanogenmod14 7.1 ROM find on LeEco.Re by RoyalCasin (THANK YOU FOR SHARING!)
The ROM is tested on CN version but maybe it works also on US version because it not contain any modem/radio or other additional parts for other partition then system and boot. TRY IT ON YOUR OWN RISK!...but share with us your experience to get thinks better.
It has some htc flavor: contains Blenkfeed ant trebouchet.
Install in TWRP (I use 3.0.2)
1. Delete cashe, system, dalvick, data
2. Instal ROM
3. delete cashe and dalvick
4. let device to boot up...first boot can take up to 5-6 min!.
5. Enjoy!
Bugs:
1. Bluetooth not work
2. Camera sometimes work sometimes not. BUT OPEN CAMERA WORK!!!!
3. Some large vidget (like clock-wether widget from htc - can be selected just if you are in smalest descktop size.
After you positioned you can come back to default descktop size - but not greater.
4. And a few more maybe....
DOWNOAD:
http://www.mediafire.com/file/jsc5q4w6pe4j5om/CM14_NOUGAT711_ABM30_31dec2016-OPONEW-10.zip
Screen shoots:
Click to expand...
Click to collapse
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
266APP said:
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
Click to expand...
Click to collapse
First I need to thank then to you and your friend Pan Youjie for ROM, I find it on LeEco.re forum. I added a bit htc sense flavor, open camera, and take out the additional mbn files to try to make the rom compatible with US version to. I try to find working files for Bluetooth also but till now without success. (I have limited development skills, maybe your friend can Pan Youjie help us to solve also the Bluetooth issue?)
Thank you again and hope is not a problem that I modified the ROM, I give the credit to developers. Together we can do things better.
P.S. It seems that the ROM is working on US version then?!
266APP said:
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
Click to expand...
Click to collapse
OT: about the ROM, I have found it on a Chinese forum, and I shared it on leeco.re giving credits to the developer( flour mo, since his cyano ROMs was already shared there). If this may cause problems to the developer, sorry about that. ( just tell me and I will remove it).
My only intent was to improve the great job done by the developer sharing it to people who own this phone.
Has anyone tried on US version? I have US version, but I'm afraid to try because I screwd up old phone...
MasterChief2 said:
Has anyone tried on US version? I have US version, but I'm afraid to try because I screwd up old phone...
Click to expand...
Click to collapse
Doesn't work ! I deleted the mbn files and flashed the ROM. After flashing it will go into the fastboot mode.
Played also with X800 US kernels...
When you replace the Kernel with some X800 US kernels like Aurel or CrisBal (obviously not 7.1.1 versions) it will bootloop which is normal as the kernel didn't match.
So the main problem persist anyway, we need a correct Kernel for our X800 US Version !
I want to get this rom on my US version. Is there some developer that can do it for us? I am ready to do some donations if we get stable firmware. I think other phone owners can do it as well.
BetaHydri said:
Doesn't work ! I deleted the mbn files and flashed the ROM. After flashing it will go into the fastboot mode.
Played also with X800 US kernels...
When you replace the Kernel with some X800 US kernels like Aurel or CrisBal (obviously not 7.1.1 versions) it will bootloop which is normal as the kernel didn't match.
So the main problem persist anyway, we need a correct Kernel for our X800 US Version !
Click to expand...
Click to collapse
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
QCN Backup when playing with CM14.1 + kernels on X800 US
ABM30 said:
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
Click to expand...
Click to collapse
And Important Infos BTW: When some others are having in mind to play around with CM14.1 + foreign kernels:
- My above tests killed my IMIE and QCN Config.
- So important: backup your own QCN file:
--> Switch X800 US into ADB Diagnostic Mode - how:
1. adb shell
2. su
3. setprop sys.usb.config diag,adb
4. A new Qualcomm USB COM Diag Device should apear ( you have to install first the Qualcomm Drivers )
5. Open Qfil 2.7.429 or 2.7.430, Choose the Serial Qualcomm COM port from 4.
6. Click in QFIL on menu Tools and choose QCN Backup Restore
7. Make a backup from your QCN File, dont't forget to check mark Enable Multi-SIM before backup !
Cheers BetaHydri !
After installed the fixed BT version ROM, neither the Open Camera App nor the stock camera app works. I also try other camera apps from playstore, however, none of them works.
borg79 said:
After installed the fixed BT version ROM, neither the Open Camera App nor the stock camera app works. I also try other camera apps from playstore, however, none of them works.
Click to expand...
Click to collapse
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Anyone have a version of this for CN without HTC stuff but has Bluetooth working?
ABM30 said:
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Click to expand...
Click to collapse
I do perform double wipe and clean install, but there is no luck with the camera app, the screen just black out !
thejodster said:
Anyone have a version of this for CN without HTC stuff but has Bluetooth working?
Click to expand...
Click to collapse
I will do one in the next days. ....
LINK ON FIRST PAGE!
ABM30 said:
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
Click to expand...
Click to collapse
I'm glad you shared this ROM with XDA, and the developer himself agreed. We are all from China, so English is not very good, please forgive me. Are you willing to donate to developers to fix BUG faster? Such as camera. Voluntary, of course. We have opened the CM14.1 kernel source code, and we hope to develop together, such as BetaHydri, or more developers.
Kernel source:https://github.com/Silentlys/android_kernel_letv_msm8994
@BetaHydri
---------- Post added at 01:25 PM ---------- Previous post was at 01:11 PM ----------
BetaHydri said:
And Important Infos BTW: When some others are having in mind to play around with CM14.1 + foreign kernels:
- My above tests killed my IMIE and QCN Config.
- So important: backup your own QCN file:
--> Switch X800 US into ADB Diagnostic Mode - how:
1. adb shell
2. su
3. setprop sys.usb.config diag,adb
4. A new Qualcomm USB COM Diag Device should apear ( you have to install first the Qualcomm Drivers )
5. Open Qfil 2.7.429 or 2.7.430, Choose the Serial Qualcomm COM port from 4.
6. Click in QFIL on menu Tools and choose QCN Backup Restore
7. Make a backup from your QCN File, dont't forget to check mark Enable Multi-SIM before backup !
Cheers BetaHydri !
Click to expand...
Click to collapse
Nice to meet you, BetaHydri. I admire you very much, thank you for the development of a good CM12.1. I am a friend of the CM14.1 developer, we are all from China, my English may not be great, please understand. We have to open the LE1 PRO CM14.1 kernel source code, hope you can also join in development as soon as possible, repair the camera does not work, we believe that you have this ability, I also hope you join CPU/GPU overclocking and do some kernel optimization. Thank you very much。
Kernel source:https://github.com/Silentlys/android_kernel_letv_msm8994
ABM30 said:
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Click to expand...
Click to collapse
I just download your latest version and perform a clean install, the result is same as before, the camera apps doesn't work, showing just a blank screen. My phone is the LeEco Max and not the LeEco 1 Pro, I just modified the file "updater-script" and install it. I attach a log file for your reference.
borg79 said:
I just download your latest version and perform a clean install, the result is same as before, the camera apps doesn't work, showing just a blank screen. My phone is the LeEco Max and not the LeEco 1 Pro, I just modified the file "updater-script" and install it. I attach a log file for your reference.
Click to expand...
Click to collapse
Now I understood, because Max has another hardware (camera is different) some files changes/additions need to be made in the rom. I will try to make the changes necessary (also adding the fingerprint files needed for MAX), but I need your help in testing because I don't have the phone and maybe I will not succeed from the first try. I will give you a replay when I have a first variant for trying out.
Any way, good to hear that the rom boot up, the kernel is matching then.
In a day or two I'll be back!
Hi @ABM30
First of all, thank you for your effort.
I also managed to successfully flash the ROM on my Le Max x900+ after i delete the #Assert line from the "updater-script". I am glad that we have the perspective for a fully working CM 14.1.
Indeed, the Camera does not work on x900. There is also no Fingerprint, IR Blaster and NFC, but that's not a big deal for the latest two options for now. Fingerprint would be nice to have though.
I would also gladly be your tester for x900+ you have the time to develop the ROM further.
Thank you again. Best regards
Sirrr said:
Hi @ABM30
First of all, thank you for your effort.
I also managed to successfully flash the ROM on my Le Max x900+ after i delete the #Assert line from the "updater-script". I am glad that we have the perspective for a fully working CM 14.1.
Indeed, the Camera does not work on x900. There is also no Fingerprint, IR Blaster and NFC, but that's not a big deal for the latest two options for now. Fingerprint would be nice to have though.
I would also gladly be your tester for x900+ you have the time to develop the ROM further.
Thank you again. Best regards
Click to expand...
Click to collapse
OK, then the first attempt (TRY IT ON YOUR OWN RISK! on X800 wont finalize the boot proces, it stuck on Cianogen boot!):
http://www.mediafire.com/file/huzduh1592esfft/X900_CM141mod_8ian17-01.zip
It has the assert for X900 so you don't need to delete anything.
If the boot is successful then try out and tell me how it works. Thanks!
Any logcat will be useful.
Related
UPDATE 08/03/16
new build out eventually, have been a bit busy last couple days, new build is ready
changelog
Code:
Updated kernel Auditor to my latest custom version
DT2W active in kernel (not enabled y default)
cpu undervoltage works now and can be changed via kernel auditor
call recording enabled
fixed the frozen lockscreen issues (thanks to hennymcc for info on that)
bluetooth audio should work too
HW Video Accell fixed
few other little tweaks
the custom kernel auditor in this build has been modified to allow enabling dt2w and cpu voltage control
download link
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160306-110028.zip
----------------------------------------
UPDATE 24/02/16
Ok another new build,
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160224-170017.zip
changelog
Code:
fixed flashing zip
few minor tweaks
UPDATE 20/02/16
another fix - ill get this right eventually.
download link:
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160220-100535.zip
changelog
Code:
zip should be fixed now too
removed TWRP from the zip will be updating my twrp post with a zip to install that shortly
hopefully fixed call audio this time
Kernel is now built with Hyper-Linaro 5.1 GCC
Rom Now built Using Sabermod toolchain for performance
----------------------------------------------------------------
UPDATE 19/02/16
yet another update folks,
download link :
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160219-170840.zip
changelog:
Code:
Fixed Sensors Libraries so they work again - also added partial support for heart rate sensor
Fixed MTP so it works again
F2FS Support Included,
TWRP3 Recovery built in
Audio Finally Fixed Including Headset Switching.
again let me know of any bugs
known issues:
touch screen still has weird issues after sleep haven't managed to narrow it down yet
---------------------------------------------------------------
UPDATE 17/02/15
Ok lets try this again,
new build up,
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial.zip
changelog
Code:
Fixed the Phone call sound and mic issues,
enabled F2FS support for /data and /cache partitions, system will auto mount those partitions as either ext4 or F2FS depending on their format - will have a fixed TWRP 3 out tomorrow with F2FS support
any bugs please let me know again folks.
you need to flash SuperSU after this rom to enable root - i have attached supersu zip to this post
-------------------------------------------------------------------------------------------------
UPDATE 14/02/15
new update out today folks
Changelog
Code:
Replaced the old crappy unstable kernel with a new build of my LP TardisKern with 1.7Ghz CPU OC etc.
Replaced a bunch of samsungs proprietary libs in the build to make sure it works with the new kernel
Replaced the Stock Camera app with Snap Camera from cyanogenmod
Removed google apps this time round :)
automatic brightness works but is not perfect yet (still working on it
you will need to grab supersu and install that after the build to get root going
link :
http://www.dmpwap.xyz/roms/pac_kminilte.zip
please advise of any issues again folks.
i have also uploaded my own device and proprietary tress for compiling with this new kernel
-----------------------------------------------------------------
hello folks.
sorry ive been very quiet the last week or so but ive been working hard on some new things (including that nice new lollipop kernel source for the G800F which is still In progress)
need to give a massive thanks to arkansawdave74 for helping with this and the build for the H model, and for helping give me the kick i needed to get back into android development proper.
but i have actually got some useful work to announce now
i am proud to announce the first BETA release of PAC-Rom for the Samsung galaxy S5 Mini LTE(G800F) (yes i have one for the dual sim H model aswell getting posted soon)
download links are below, and i will let others post screenshots etc as i dont currently have the time since im typing this late at night to get any.
PLEASE BE ADVISED THIS ROM IS FOR THE SM-G800F ONLY AND COULD CAUSE A BRICK IF FLASHED TO OTHER DEVICES
http://www.dmpwap.xyz/roms/pac_kminilte.zip
this is now using a fully up to date TardisKern with 1.7ghz oc amoungst other things.
please mention any bugs etc so i can get to work on them.
current issues noted:
selinux support is completely disabled
mtp(usb storage) may or may not work as my pc does not seem to want to play with any usb storage devices currently
working
phone,
messaging(mms/sms)
mobile data including LTE/4G
display and 3d graphics
remote control transmitter
google apps
wifi
GPS
sound
bluetooth
pretty sure everything else works too
any and all donations would be much appreciated to help cover hosting costs
XDA:DevDB Information
PAC-ROM 5 For Galaxy S5 Mini (SM-G800F), ROM for the Samsung Galaxy S5 Mini
Contributors
DJ_Steve, arkansawdave74, PAC-Rom team, Jackeagle & hennymcc for Device Trees
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: PAC-MAN Rom
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-01-30
Created 2016-01-31
Last Updated 2016-03-08
Thanks you for this rom ?
Envoyé de mon SM-G800F en utilisant Tapatalk
Issues?
First thanks to you. but can you rewrite the mainpage and write exactly what works and what not? That would be very helpful
raffejos said:
First thanks to you. but can you rewrite the mainpage and write exactly what works and what not? That would be very helpful
Click to expand...
Click to collapse
updated the main post, but most things seem to work
No root access !
I have the settings on Apps and ADB.
But apps dont have root access.
I am going back to CM 13 !!!
another343 said:
I have the settings on Apps and ADB.
But apps dont have root access.
I am going back to CM 13 !!!
Click to expand...
Click to collapse
Have you installed SuperSU from play store.. Root works fine for others
Sent from my SM-G800F using Tapatalk
Got it !
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
another343 said:
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better
Click to expand...
Click to collapse
Got it !
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better
Another Problem !
DJ_Steve said:
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
Click to expand...
Click to collapse
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
another343 said:
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
Click to expand...
Click to collapse
Strange how your having problems as im using the same exact build and play store works fine here. Have you tried a wipe
Sent from my SM-G800F using Tapatalk
DJ_Steve said:
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
Click to expand...
Click to collapse
Root make over Odin , add a file attached to pda or ap and restart the unit . in my work .
Root work fine you need just turn root on in dewelopers
Options in setings like in cm12.1
Bloatware !!!!
Can you remove all the gApps like Fit,Movies Play ....
Please I wanna install gApps like Open Gapps Pico.
And if you are gonna do it, please dont remove the launcher.
Bye m8
another343 said:
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
Click to expand...
Click to collapse
same to me please fix it i very like this super fast ROM !!! thx
liborhabrnal said:
same to me please fix it i very like this super fast ROM !!! thx
Click to expand...
Click to collapse
already planning to fix that - didnt mean to leave the gapps in in the first place just forgot to remove them after testing myself
Please remove the gapps so everyone can choose the gapps fron opengapps oder somewhere else. Althoug Please use another launcher so not the Google now launcher for example trebuchet from cyanogenmod. The features are the best but i cant use it daily because gapps:cyclops:
Your work is awesome and a progress in custom Roms for the nice s5 mini:good::good:
raffejos said:
Please remove the gapps so everyone can choose the gapps fron opengapps oder somewhere else. Althoug Please use another launcher so not the Google now launcher for example trebuchet from cyanogenmod
Click to expand...
Click to collapse
try to be polite, as that comes across as quite nasty in some ways(though i understand english may not be your natural language so quite possibly is not your fault), ill be fixing that issue once i get my build system back up and running which it is not currently
Deleted
link should be back now
and i wont use drive etc after previous big issues with them years ago
(and why would i pay for android file host when i have my own server)
Resurrection Remix 5.7.3Huawei Honor 3C [H30-U10]Intro:
Resurrection Remix MM is an aftermarket ROM based on CyanogenMod 13/Marshmallow with lots of customization and at the same time packing a punch of performance.
This ROM was ported and tested by me for a few days before I decided to upload it for other users. Please post your opinions and bugs you might encounter in this thread, I will try my best to sort them out. Thank you.
Resurrection Remix Community Page:
https://plus.google.com/communities/109352646351468373340
FAQ: https://plus.google.com/101154841950858558748/posts/5qFH3vxEKfL
ROM Download Link:
https://drive.google.com/file/d/0B32KJ-m23FxDaU5rV1REUk9Za3c/view?usp=sharing
Google Apps:
http://opengapps.org/ (pico package recommended, but if you use Google Now then use the micro package)
Installation Instructions:
> Before any modifications please take a nandroid backup of your phone so you can revert it in case anything goes wrong
> Go to recovery and wipe all partitions except SD card
> Flash the Rom zip
> Flash GApps right after flashing the Rom zip
> Now to flash boot.img you can either
1 - Power off the phone. On a PC, extract boot.img from Rom zip and flash it using SP Flash Tool.
Or
2 - Copy the boot.img to phone and install it using TWRP_2.8.6.0 by codelover. To do so reboot to recovery, Tap Install, on bottom right Tap Install Image and browse to location where you copied boot.img earlier. Swipe to install and when it asks for installing Boot or Recovery, select Boot and proceed.
> In case of no signals issue, flash an appropriate modemfix from codelover's thread here
Kernel: Stock Honor 3C Kernel.
init.d Tweaks:
Download the files from here and copy all of them to system > etc > init.d before or after installing the Rom. Open the Kernel Auditor app and under init.d tab, enable Emulate. Done!
All tweaks previously included by @Pavel Sajjad Khan in his ports.
Bugs:
Existing bugs in Android 6 Roms for our device exists in this build as well(they won't go away easily ). If something went unnoticed by me, please comment on it here.
> VPN bug(Although you can use a third party app such as shadowsocks)
> Network drops when incoming call answered with earphones plugged in
> Switching between 2G/3G mobile data doesn't work
Patches:
Battery Capacity Patch: Download the patch zip from here and flash from recovery. Fixes the inaccurate battery capacity value in framework-res. Courtesy of @stanleygamer.
Maximum Volume: Download the volume patch file from here. Copy it to data > nvram > APCFG > APRDCL. Set file permissions to rwrw-- and reboot phone.
GPS Fix:
If GPS doesn't work, download the GPS test app from here. Go to Settings > Location > Turn ON Location > Set Mode to Device Only.
Now open GPS Test app and let it lock GPS, will take less than a minute if you're outside.
After first lock on GPS test app, you can now use GPS normally. You only have to do this once after installing the Rom.
Note: GPS reviews needed so please check if GPS works for you and comment here preferably with your location. Much appreciated!
Credits:
Special thanks to @stanleygamer for helping me figure out solutions to bugs.
Ferhung - The man behind CM13 for MT6582
Fire855 - Another legend
Hyperion70
www.mtkroms.com
Ajit Guraya - Compiled Resurrection Remix v5.7.3 for MT6582 from source and fixed camera !
Minh Quoc and Karim Gahgah - For video recording fix
Aniruddha Adhikary - For his amazing USSD Fix
Sergey Kochetkoff - For his amazing GPS fix
Team Roger That - Ajit Guraya, Diparth Shah, Pawan Diyal, Ashutosh Dubey, Waseem Maya, Ankit Bhatangar, Rohan Taneja, Vipul Jha, Pranav Reddy
Resurrection Remix Devs/Team - www.resurrectionremix.com
Required blobs (Really huge thanks) :
nofearnohappy, Varun Chitre, Ariafan, Vald.masti, Fire855, Alex
Battery tweaks or something?
Enviado desde mi H30-U10 mediante Tapatalk
lHumanizado said:
Battery tweaks or something?
Enviado desde mi H30-U10 mediante Tapatalk
Click to expand...
Click to collapse
I haven't included any, but if you want I can add the init.d tweaks previously present in the Rom by Pavel.
Emiya_Kiritsugu said:
I haven't included any, but if you want I can add the init.d tweaks previously present in the Rom by Pavel.
Click to expand...
Click to collapse
Thanks, any tweak that you can include would be great, thanks for keeping this device alive
Enviado desde mi H30-U10 mediante Tapatalk
http://www.mtkroms.com/2016/06/bugless-temasek-for-mt6582-lollipop-kernel.html
hey is this rom for our honor 3c??its bugless and kernal 3.10
hassanjavaid8181 said:
http://www.mtkroms.com/2016/06/bugless-temasek-for-mt6582-lollipop-kernel.html
hey is this rom for our honor 3c??its bugless and kernal 3.10
Click to expand...
Click to collapse
Unfortunately our device does not have lolipop kernel so far so this wouldn't work.
Is your build stable for daily driver...I am on stock kitkat..its battary dran really fast..and heat issue..is that issue solved in this rom??and is gps working??and one more question is that your build or pavel build??
hassanjavaid8181 said:
http://www.mtkroms.com/2016/06/bugless-temasek-for-mt6582-lollipop-kernel.html
hey is this rom for our honor 3c??its bugless and kernal 3.10
Click to expand...
Click to collapse
Unfortunately our device does not have lolipop kernel so this wouldn't work
Already answered..
If I want to install that rom can you send me required files..how can I prepare my device for that rom..I am on stock with locked bootloader..
hassanjavaid8181 said:
Is your build stable for daily driver...I am on stock kitkat..its battary dran really fast..and heat issue..is that issue solved in this rom??and is gps working??and one more question is that your build or pavel build??
Click to expand...
Click to collapse
Yes you can use it as daily driver since everything you would require on daily basis works in this Rom. Which stock firmware are you on? I use B268 and so far for me no other stock or custom rom has had a better battery backup than this.
I haven't faced any heating issues on this build, battery backup is fine too. GPS works. And lastly yes, this is my port.
I have a international version ...and I am on b310 pakistan version..will I lost simm if I use this rom??I am really new with those things..so can you guide me with that..thanks in advance
hassanjavaid8181 said:
If I want to install that rom can you send me required files..how can I prepare my device for that rom..I am on stock with locked bootloader..
Click to expand...
Click to collapse
The rom page on mtkroms has the list of required files from stock rom that you would need to port that Rom for your device. It's on the bottom of the page. Other than that, you might need to replace some files if you encounter bugs after installing the Rom.
Try to port a Rom you like, if you need help send me a PM
hassanjavaid8181 said:
I have a international version ...and I am on b310 pakistan version..will I lost simm if I use this rom??I am really new with those things..so can you guide me with that..thanks in advance
Click to expand...
Click to collapse
If you use this build, no you wouldn't lose sim/imei since I have the same phone(same country too) variant and I used to modem files for it
You misunderstood me bro..I dont want to port room ihave honor 3c internation version I have to unlock bootloader and inatal twrp..how can find twrp recovery for that device
---------- Post added at 02:06 PM ---------- Previous post was at 02:04 PM ----------
Thanks bro...and one more question if I want to come back on stock is that esay to come back on stock??
hassanjavaid8181 said:
You misunderstood me bro..I dont want to port room ihave honor 3c internation version I have to unlock bootloader and inatal twrp..how can find twrp recovery for that device
---------- Post added at 02:06 PM ---------- Previous post was at 02:04 PM ----------
Thanks bro...and one more question if I want to come back on stock is that esay to come back on stock??
Click to expand...
Click to collapse
Uh sorry about that. To unlock bootloader, follow this guide by codelover http://forum.xda-developers.com/showpost.php?p=54603756&postcount=4
For installing twrp http://forum.xda-developers.com/showpost.php?p=54603787&postcount=6
The appropriate version of twrp for our variant is H30-U10_TWRP_2.8.6.0.zip
Coming back to stock Rom is very easy using either update.app or sp flash tools http://forum.xda-developers.com/showpost.php?p=54603756&postcount=4
Please take phone backup with SP flash tools before any modifications http://forum.xda-developers.com/showpost.php?p=54603738&postcount=3
Thanks alot bro..just downloading your build..but I dont understand make a backup with sp flash tool..can I make a backup with twrp..wil that work??
hassanjavaid8181 said:
Thanks alot bro..just downloading your build..but I dont understand make a backup with sp flash tool..can I make a backup with twrp..wil that work??
Click to expand...
Click to collapse
Codelover has very easy to follow instructions on taking backup using spft but a twrp backup is fine too.
Thanks bro...whats gapps should I download..stock..full.micro or nano??
hassanjavaid8181 said:
Thanks bro...whats gapps should I download..stock..full.micro or nano??
Click to expand...
Click to collapse
Micro GApps are recommended if you use Google Now, else install nano.
Thanks..can u please tell me step-by-step guide how to install boot.img with spftool?
[I'm not responsible for bricked devices. Please read the steps!]
LeEco probably won't provide new source code for their phones anytime soon, so i got really lucky by getting this to work just modifying kernel and updating some binaries.
There's still a lot of modifications to do and I'll update it as frequently as i can, even though i don't have a lot of free time, but bear in mind that this might also be as far as we can get without proper source from LeEco.
As of now the bugs are so many that i can't check them all.
Requirements:
. TWRP 3.0.2
. Brief knowledge of updating through TWRP(Backup/Wipe/Install)
. Le 1 Pro or Max (X800/X900) not CN.
Not working:
Flash/Torch
Speakers
GPS(Partially, doesn't seem to lock location)
Video Playback in Gallery App
Mute Switch
Skype
Battery Percentage
USB
...
Although it's not ready for daily use, most critical functions are working such as:
Microphone
Phone Calls
Cellular Data (3G/LTE/HSPA tested)
Back camera
Front Camera
HDR
HW acceleration
Bluetooth
How to install:
1. Download ROM -> Link to v0.2(Current)
2. Wipe Data / Factory Reset
3. Install ROM
4. Install GApps 6.0 (Link below)
5. Reboot
6. Wait 20~25 Minutes (Booting)
GApps -> http://opengapps.org/ -> Select ARM64 - 6.0 of your preference
Changelog:
v0.1 [09/19/16] - Pre-Alpha - initial release
v0.2 [09/29/16] - Pre-Alpha - Now based on Flour_mo Cm13 best for everyday use ROM; Fixed problem with META-INF and any possible bricking.
Please report every other bug, post your logcats with the indicated bug as well otherwise it'll be useless.
This rom should work with all international versions of Le 1 Pro and Le Max.
Screenshots
Thanks for the effort mate
v6ser said:
[Currently in Pre-Alpha, please read everything]
I'm able to boot CM13 Marshmallow, on the Letv Le 1 Pro after some modifications to the stock kernel.
As of now the bugs are so many that i can't check them all, but here are some.
Not working:
Flash/Torch
Speakers
GPS(Partially, doesn't seem to lock location)
Video Playback
Mute Switch
Skype
Battery(Doesn't seem to be recognized)
...
How to install:
1. Download ROM -> Link coming soon
2. Reboot Recovery
3. Wipe Data / Factory Reset
4. Install ROM
5. Reboot
6. Wait 20~25 Minutes (Booting)
Please report every other bug.
This rom should work with all international versions of Le 1 Pro and Le Max.
Screenshots(Coming soon).
Click to expand...
Click to collapse
Thanks a lot. You've made the first step. It's a shame for LeEco developers. When You arrive beta stadium I'll try Your work. For now I'm not able because my X800 is in daily use.
v6ser said:
[Currently in Pre-Alpha, please read everything]
I'm able to boot CM13 Marshmallow, on the Letv Le 1 Pro after some modifications to the stock kernel.
As of now the bugs are so many that i can't check them all, but here are some.
Not working:
Flash/Torch
Speakers
GPS(Partially, doesn't seem to lock location)
Video Playback
Mute Switch
Skype
Battery(Doesn't seem to be recognized)
...
How to install:
1. Download ROM -> Link coming soon
2. Reboot Recovery
3. Wipe Data / Factory Reset
4. Install ROM
5. Reboot
6. Wait 20~25 Minutes (Booting)
Please report every other bug.
This rom should work with all international versions of Le 1 Pro and Le Max.
Screenshots(Coming soon).
Click to expand...
Click to collapse
Very promising...
Gesendet von meinem LeTv 1 Pro mit Tapatalk
Link is up, enjoy
v6ser said:
Link is up, enjoy
Click to expand...
Click to collapse
Bricked my LeTV One Pro US like all other CM13 ROMs. So still a lot todo.
I had to use QFIL 429 to recover. Reflashed my C12.1 ROM again.
cheers
BetaHydri
BetaHydri said:
Bricked my LeTV One Pro US like all other CM13 ROMs. So still a lot todo.
I had to use QFIL 429 to recover. Reflashed my C12.1 ROM again.
cheers
Betaydri
Click to expand...
Click to collapse
Will send a fix in no time. Just wait a minute or so.
Error is in META-INF so it'll be a small download, sorry for the inconvenience and thanks for reporting
EDIT: Hotfix added to OP http://www88.zippyshare.com/v/513XLCMB/file.html
Thx @v6ser !
thanks for the effort
leEco dev are so bad!
Got this error when I follow the steps and try to install it..
Bjarnie said:
Got this error when I follow the steps and try to install it..
Click to expand...
Click to collapse
Can you see META-INF folder after you zipped it with hotfix? From the screenshot i get that the files are not there. This error only happens if the files are not there indeed lol
Thanks for reporting.
v6ser said:
Can you see META-INF folder after you zipped it with hotfix? From the screenshot i get that the files are not there. This error only happens if the files are not there indeed lol
Thanks for reporting.
Click to expand...
Click to collapse
lol. yes there is a meta inf folder.. haha I'm not that stupid:angel:
If someone managed to flash this ROM on US version?
I'm uploading a new version based on a different chinese CM13 rom.
It's less bloated and of course, it works without a hotfix since some people had problems with that before
EDIT: Link is up!
v6ser said:
I'm uploading a new version based on a different chinese CM13 rom.
It's less bloated and of course, it works without a hotfix since some people had problems with that before
EDIT: Link is up!
Click to expand...
Click to collapse
US or CN ROM?
US
v6ser said:
[I'm not responsible for bricked devices. Please read the steps!]
LeEco probably won't provide new source code for their phones anytime soon, so i got really lucky by getting this to work just modifying kernel and updating some binaries.
There's still a lot of modifications to do and I'll update it as frequently as i can, even though i don't have a lot of free time, but bear in mind that this might also be as far as we can get without proper source from LeEco.
As of now the bugs are so many that i can't check them all.
Requirements:
. TWRP 3.0.2
. Brief knowledge of updating through TWRP(Backup/Wipe/Install)
. Le 1 Pro or Max (X800/X900) not CN.
Not working:
Flash/Torch
Speakers
GPS(Partially, doesn't seem to lock location)
Video Playback in Gallery App
Mute Switch
Skype
Battery Percentage
USB
...
Although it's not ready for daily use, most critical functions are working such as:
Microphone
Phone Calls
Cellular Data (3G/LTE/HSPA tested)
Back camera
Front Camera
HDR
HW acceleration
Bluetooth
How to install:
1. Download ROM -> Link to v0.2(Current)
2. Wipe Data / Factory Reset
3. Install ROM
4. Install GApps 6.0 (Link below)
5. Reboot
6. Wait 20~25 Minutes (Booting)
GApps -> http://opengapps.org/ -> Select ARM64 - 6.0 of your preference
Changelog:
v0.1 [09/19/16] - Pre-Alpha - initial release
v0.2 [09/29/16] - Pre-Alpha - Now based on Flour_mo Cm13 best for everyday use ROM; Fixed problem with META-INF and any possible bricking.
Please report every other bug, post your logcats with the indicated bug as well otherwise it'll be useless.
This rom should work with all international versions of Le 1 Pro and Le Max.
Screenshots
Click to expand...
Click to collapse
So there is hope to get a working CM13 for daily use. This phone with its nice hardware has deserved cm13. Nougat also would be nice, but cm 13 is an important step.
Windows does not recognize the terminal
the battery percentage is ok in TWRP mode
v6ser said:
[I'm not responsible for bricked devices. Please read the steps!]
LeEco probably won't provide new source code for their phones anytime soon, so i got really lucky by getting this to work just modifying kernel and updating some binaries.
There's still a lot of modifications to do and I'll update it as frequently as i can, even though i don't have a lot of free time, but bear in mind that this might also be as far as we can get without proper source from LeEco.
As of now the bugs are so many that i can't check them all.
Requirements:
. TWRP 3.0.2
. Brief knowledge of updating through TWRP(Backup/Wipe/Install)
. Le 1 Pro or Max (X800/X900) not CN.
Not working:
Flash/Torch
Speakers
GPS(Partially, doesn't seem to lock location)
Video Playback in Gallery App
Mute Switch
Skype
Battery Percentage
USB
...
Although it's not ready for daily use, most critical functions are working such as:
Microphone
Phone Calls
Cellular Data (3G/LTE/HSPA tested)
Back camera
Front Camera
HDR
HW acceleration
Bluetooth
How to install:
1. Download ROM -> Link to v0.2(Current)
2. Wipe Data / Factory Reset
3. Install ROM
4. Install GApps 6.0 (Link below)
5. Reboot
6. Wait 20~25 Minutes (Booting)
GApps -> http://opengapps.org/ -> Select ARM64 - 6.0 of your preference
Changelog:
v0.1 [09/19/16] - Pre-Alpha - initial release
v0.2 [09/29/16] - Pre-Alpha - Now based on Flour_mo Cm13 best for everyday use ROM; Fixed problem with META-INF and any possible bricking.
Please report every other bug, post your logcats with the indicated bug as well otherwise it'll be useless.
This rom should work with all international versions of Le 1 Pro and Le Max.
Screenshots
Click to expand...
Click to collapse
Is there any chance we can get the source of this rom ?
########## #############
Official TWRP with prebuild Kernel is available here:
https://forum.xda-developers.com/mi-mix-2/development/recovery-twrp-3-2-1-0-xiaomi-mi-mix-2-t3780525
########################
Greetings flashaholics!
As usual before flashing this TWRP make an complete backup of your system!!!
Why another TWRP?
you'll get the latest TWRP release with most recent features & bugfixes
build live from sources - no prebuild kernels/files
more partitions to backup/restore supported
made project treble compatible by adding vendor & vendor_image partitions (leaving cust partition available for legacy purposes)
double tap to wake display
survives installation of official MIUI Global/CN ROMs (read INFO section to know how to achive that result exactly)
DOWNLOAD TWRP 3.2.3-0
... please see also supplemental infos & tool downloads below in INFO section
Please leave feedback for the beta. Does it work well? Did you encounter any problems? THX
Important changes in latest 3.2.3-0 build: 20180815-2003
based on fresh MIX 2 OmniRom base files and new msm8998 common sources - speed seems to be upgraded a little
previous changelog:
TWRP 3.2.3-0 based - build on Nextgen-Networks build environment with latest kernel 4.4.78
"FrankenTab" - mixed fstab v1 & v2 layout to achive de-/encryption and also keep as much partitions available as possible
treble compatible (by adding vendor & vendor_image partitions)
backup write speed restored (80 MB/s for file systems / 110 MB/s for imaged drives) and stayed compatible with OmniRom power/storage/kernel settings
Build completely live from latest build tree files - prebuild kernel fragments not needed anymore *yay*
en-/decryption support
ADB/MTP support
display brightness fixed - it's bright again! (see detailed notes in download section if it did not work for you)
additional partitions backup & restoreable (20 overall)
doupble tap to wake display is supported
display works when booting from LOS/OmniRom/RR to recovery via menu
survives installation of official MIUI Global/CN ROMs (OTA not tested yet)
Tested and perfectly working with ROMs as follows
MIUI 8.8.9 xiaomi.eu
MIUI 8.7.x xiaomi.eu
MIUI 8.6.x xiaomi.eu
MIUI 8.6.21 CN / xiaomi.eu
MIUI 8.6.14 Global
MIUI 8.6.8 CN
MIUI 8.5.11 Global
MIUI 8.5.8 Global / CN / xiaomi.eu
MIUI 8.5.2 Global
MIUI 8.4.26 by xiaomi.eu
LineageOS 15.1 build 20180501
OmniRom 8.1.0-20180430 HOMEMADE
INFO:
official MIUI Global/CN ROMs installation survival: dont reboot after ROM installation/update - just start a new flash session and flash latest magisk beta in a separate process - thats all! (OTA survival has not been tested by now)
If your TWRP gets constantly overwritten then flash the no-verity-opt-encrypt-1.6.zip right after your flashed TWRP to your device and right after each install/update of an original XIAOMI ROM from (en.)miui.com.
Procedure not needed for xiaomi.eu based ROMs.
Download no-verity-opt-encrypt 1.6 here
To make the flashing a little more convenient I've written a little windows script that utilizes adb/fastboot and presents all recovery images in its folder for your flashing happiness
This package also contains a script to remove/bypass the pin/passcode/pattern you've set - this could help then restoring an backup and the definitely correct pin/passcode/pattern is not accepted afterwards
Download recovery-flash.cmd 1.29 here
need an matching firmware for your device?
Download here from the Xiaomi Firmware Updater project on XDA (downloads in post 2)
Some very clarifying official information about en-/decryption types and how it works: https://source.android.com/security/encryption/
take a look here to have a full backup with internal storage covered also: [URL="https://forum.xda-developers.com/android/apps-games/app-twrp-tipatch-backup-internal-t3831217]Info & Download TiPatch[/URL]
For more detailed changelogs visit the download page.
Updated versions will be announced in this thread.
Instructions how to setup & build your own TWRP:
https://github.com/nextgen-networks/android_device_xiaomi_chiron-OMNI/blob/android-8.1_v10/README.md
Sourcecode (updated 2018-08-15 / v13):
Modified TWRP: https://github.com/nextgen-networks/android_bootable_recovery
Device-Tree (Device): https://github.com/nextgen-networks/android_device_xiaomi_chiron-OMNI
Device-Tree (SOC): https://github.com/nextgen-networks/android_device_xiaomi_msm8998-common
Kernel: https://github.com/omnirom/android_kernel_xiaomi_msm8998
Vendor-Tree (Device/SOC): https://github.com/DonkeyCoyote/proprietary_vendor_xiaomi
Thanks, works great so far.
As mentioned in the Lineage thread I intend to you encryption, neither the MIUI nor the iceman TWRP recoveries manage to mount my encrypted LineageOS storage, they just fail after the prompt.
Under this recovery I don't get a prompt.
Just wanted to mention, I will use it and test it anyway if encryption is not working yet, I will manage somehow.
Iam on Lineage. But after flashing TWRP not starting, only the fastboot mode
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
https://www.nextgen-networks.de/de/...17-twrp-recovery-3-2-1-0-universal-build.html
It this the right Recovery?
Feenfleisch said:
Iam on Lineage. But after flashing TWRP not starting, only the fastboot mode
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
https://www.nextgen-networks.de/de/...17-twrp-recovery-3-2-1-0-universal-build.html
It this the right Revolver?
Click to expand...
Click to collapse
Hey @Feenfleisch,
yes it is the correct link.
What exact commands did you use to flash TWRP?
Did the device does not boot at all or only when booting to recovery?
Only then ist booting recovery. Ich flash with Flashify
---------- Post added at 07:02 PM ---------- Previous post was at 06:57 PM ----------
The TWRP fromm the last link work (twrp-3.2.1-0-chiron_raupe-20180104-1520.img), the TWRP from your first Link not work. Maybay the wrong link?
Feenfleisch said:
Only then ist booting recovery. Ich flash with Flashify
---------- Post added at 07:02 PM ---------- Previous post was at 06:57 PM ----------
The TWRP fromm the last link work (twrp-3.2.1-0-chiron_raupe-20180104-1520.img), the TWRP from your first Link not work. Maybay the wrong link?
Click to expand...
Click to collapse
Uuuuuuups
Link leaded to Mi MIX instead of Mi MIX 2 download.
I fixed that ...
Thanks for the hint.
I've heard about several issues with flashify - better use fastboot.
USB MTP/ADB Sideload does not seem to work for me. IceMan's TWRP does.
Uploading to Google drive latest release
https://drive.google.com/file/d/1egaT1P66oEc1M0_S-tNXjG43nTLCDr3z/view?usp=drivesdk
DaCoolX said:
USB MTP/ADB Sideload does not seem to work for me. IceMan's TWRP does.
Click to expand...
Click to collapse
I'll investigate that (expect an update for this issue next week).
Thanks for reporting!
allrockedout said:
Downloads taking like 20 minutes I'll upload it to Google drive when done....
https://drive.google.com/file/d/1szvkblRyxxcVqVSqu7ejxhIkd07SUIqD/view?usp=drivesdk
Click to expand...
Click to collapse
... hmm this is very unusual - tested the speed to server and it took me a couple of seconds.
If you host the file as mirror please keep an eye for updated versions in future.
raupe said:
... hmm this is very unusual - tested the speed to server and it took me a couple of seconds.
If you host the file as mirror please keep an eye for updated versions in future.
Click to expand...
Click to collapse
Yeah I'll keep it updated of course. Plan on keeping this phone for a while. So I flashed twrp 3.2.1-0 image in twrp rebooted back into twrp..now my file storage is encrypted again. So I'll have to wipe data again... Ugh ok I'll test it out.
Cheers - downloading now.
This is vanilla TWRP right? Tired of seeing different themes, Chinese or other "customizations" in other TWRPs.
Sent from Xiaomi Mi Mix 2 @ LineageOS 14.1
I had to flash back to epic twrp. Couldn't remove encyption. After wiping data and rebooting to system than back to twrp. Everything was encrypted.
AndyYan said:
Cheers - downloading now.
This is vanilla TWRP right? Tired of seeing different themes, Chinese or other "customizations" in other TWRPs.
Sent from Xiaomi Mi Mix 2 @ LineageOS 14.1
Click to expand...
Click to collapse
Jepp this is stock/vanilla TWRP.
The only change i've made was to activate NTFS support some Qualcom specific stuff and disable the annoying "mouse" cursor that is present on default builds.
As you can read in comments (here and in Mi MIX forum) there are some hick-hacks with encryption.
This take a more deep dive because of the huge amount of variants the encryption has made from (a.k.a.: every OS build of MIUI/LOS/RR/Epic/mi-globe may use an different approach/driver for encryption).
There seems to be an problem with software and hardware encryption that conflicts with each other (see LineageOS change id 199842)
allrockedout said:
I had to flash back to epic twrp. Couldn't remove encyption. After wiping data and rebooting to system than back to twrp. Everything was encrypted.
Click to expand...
Click to collapse
Greetings @allrockedout!
Thanks for your report!
Just to figure out what leads to this behavior - could you give some information about your current firmware version, build date of the epic rom you used and what kernel the device info states?
Thanks in advance!
raupe said:
Greetings @allrockedout!
Thanks for your report!
Just to figure out what leads to this behavior - could you give some information about your current firmware version, build date of the epic rom you used and what kernel the device info states?
Thanks in advance!
Click to expand...
Click to collapse
I'm on Global Developer beta
Greetings readers!
I've build a new version today that contains some different en-/decryption libraries.
Please give it a shot and as always: Feedback is very welcome
Download: https://www.nextgen-networks.de/de/downloads/category/15-xiaomi-mi-mix-2.html
For those with touchscreen issues:
There have been made no kernel changes so dont expect any changes here.
is it suit for oreo cause my mix2 already update to 8.0, developer edition
ShawnLukeLee said:
is it suit for oreo cause my mix2 already update to 8.0, developer edition
Click to expand...
Click to collapse
Will be fine
ShawnLukeLee said:
is it suit for oreo cause my mix2 already update to 8.0, developer edition
Click to expand...
Click to collapse
Jipp, should work with 8.0/8.1 - sources used for building are 8.1 based.
I can give more detailed feedback if I'm selected for XIAOMI Android 8 global dev ROM next week.
[OSS cam hal][H2os][31/03/2018]
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
This is Modified/Edited Version of Respected dev Youlinw”s H2os.
This Rom is Edited by Me With Some Help From other devs.
Benefits are as Following:-
1) OSS cam hal support is Added, Portrait Mode With HDR+ On Both Cameras.
2) Removed SuperSu , Now You Can Flash Magisk or SuperSu.
3) Removed Chinese Bloatware.
4) Added Google Installer For Easy Installation of Google Apps.
5) AfterFlash.zip fro Some Extra/Useful functionalities.
6) Some Fixes Here And There.
Click to expand...
Click to collapse
Installation instructions
Flashing Instructions
* Wipe System, Data,Cache,dalvik cache
* Flash Rom Zip
* Flash Provided Magisk If you Want Root
* Flash Provided Magisk Universal SafetyNet Fix Zip to Pass SafetyNet.
* Wipe Dalvik Cache And Reboot.
Click to expand...
Click to collapse
Download
Download Provided camera apk, Google Installer Apk magisk and safetynet fix Zip.
Download Link
Click to expand...
Click to collapse
Changelog
Code:
Current changelog: 11 Feb 2018
[note] Initial Release.
* Added OSS cam hal Support.
* Removed SuperSu Codes.
* Removed Chinese Bloatwares.
Thanks To/Credits
Code:
* First of all, Youlinw, For his Excellent Support to our Device :)
* thanks Srihari210 For His guidance, Thanks sidS6 For Initial Testing And Immediate Feedback.
This is My First Build ,If Anybody Wants to help me, want help from me,or want to test my initial builds or want to join me as team , should PM me.
I will Build similar versions of MIUI 9, And other Roms.
Guys, if you want me to port a feature from other rom/device, or think that a full rom can be port from similar specs devices,let me know in comments.
eagerly waiting for feedback.
XDA:DevDB Information
h2os, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
narshi shukla, narshi shukla, srihari210
Source Code: https://weibo.com/YouLinw
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
Based On: AOSP,Oxygen OS
Version Information
Status: Beta
Beta Release Date: 2018-02-11
Created 2018-02-11
Last Updated 2018-04-01
Click to expand...
Click to collapse
UPDATE
H2os rom update 19th may 2018
Changelog
1) Heat fix,may result in more battery life.
2) performance optimisations,
3) Added oss cam hals,
4)localised for india.
5) Radio updated,resulting in more stable network receptions.
6) Rom is stable af.
7) Fixed Charging issues.
8) Fixed Magisk root failures.
9) other optimisation and fixes.
FLASHING INSTRUCTIONS
1) Flash Rom zip,reboot
2) Setup your google account, use google installer to install gapps,
3) flash afterflash zip, don't flash it before setting up google account as this will make account setup crash.reboot.
4) Flash Magisk if u want root, reboot.
5) let the device cool after flashing.
6) additionally you can flash any thermal mods, sound and other mods too.
Note:
1) If you have play store crash, see point #3 above, if its fine then clean data of play store and play services. If still doesn't work then let it download latest play store, it will update automatically.
2) If you have contact sync issues, download contact app from google, if you have trued many other tricks and contacts are still not syncing then let rom take its time, it will sync automatically after few hours.
3) portrait mode in gcam is still buggy, you can install other apks too.
Edit:
Forgotten to mention in changelog post.
Added support for custom kernel,some of them cam improves volume output too along with performance nd battery,
Though its still in beta,its pretty much stable.
if u r flashing custom kernels, it means you are TESTING this feature.
i m expecting Bug reports rather than complaints.
I Dont have enough time to test every ro for couple of days, i have tested following kernels for few hours , almost every compatible(non treble,nougat) kernels are booting and stable too.
ArBeast R6 - N
Heliox-N
Heliox N with wlan as module,
Uberkernel
DarkMoon Kernel
Jaguar N Kernel.
If a Kernel is Causing Unexpected results , be patient as i have noticed some of these kernel takes some times to settle(jaguar took 3 4 hours before full stable).
if u want to restore stock kernel, flash rom zip again, setup google account and then flash afterflash zip.
-----------------------------------------------------------------------------------------------------------------------------
H2OS 31/03/2018
1) OSS Cam Hals Are Fully Supported Now,Gcam With Portrait Mode Works without FC.
2) Fixed Charging Issue.
3) Removed SuperSu.
4)Added Swifkey(Dev Forgot to Include Keyboard)
5) Added H2os AfterFlash.zip which
-1) Enables Oss cam hals ,Apply cameraFix from Youlinw.
-2) Creates Folder 'H2OS ExtraFiles' which contains
-- 1) Magisk v16.0
--2) Pixel Mod camera by Arnova (gcam) and MGC cam
--3) Futuristic Pixel launcher
--4) Some Magisk modules which may improve ram performance and may enable Slow motion in Gcam.
--5) Google Installer 3.0 apk,Gboard Apk in case Swiftkey Fails.
--6) Universal SafetyNet Fix And Other Magisk Modules.
Flashing/Setup/installation Instructions
This Rom don't support encryption, so if u r coming from ZUI, erase your data, only official TWRP is supported, no need to unmount system or anything, you can flash in normal way.
1) Flash Rom zip=AfterFlash zip.
2) Skip setup, Go to Setting/Languages & Input/Virtual Keyboard/enable swiftkey there.
3) Go to File manager then Storage/H2os ExtraFiles Install Google Installer apk,setup But Dont Login.
4) Go to Setting/Apps/ Give Permission To all Contact/Google Apps In order to solve Sync Issues,Then Login In Play Store,Reboot.
5) Install PixelMod camera Apk From H2OS ExtraFiles Folder,
6) There Are More Files/Apks You can Install them if you Need them
Tips And Tricks/Known Issues/WorkArounds
1) To Solve Yellow Tint on Display/Screen See Atachement.
2) If Portrait Mode Crashes,First Switch To Front Cam Then Enable Portrait Mode,If Its Crashing Too Often,Try other Provided Apk
3) If HDR+ Doesn't Work, It will Work With Portrait Mode, As Portrait Mode Only Works on Humans,If Will Apply Only HDR+ Instead Of Portrait Mode Effect,Other
Provided camera Have Working HDR+ , But Portrait Mode May Crash More Often,Though You Can Use Both Or One Which Suits You Better.
4) For Contact Sync Give All Permissions To Gapps.
5) If Third Party Camera Apps Not Working , Reflash AafterFlash Zip.
6) No Notification After Clearing Apps From Recent? Disable Aggressive Doze Under Battery Setting.
7) Low Volume?? Try any Sound Mods Like Shox/Dolby/Viper4A Or any Other of Your Choice.
Note: Though I have Tried My Best , Still There May Be Gcam Issue/Fc, Its Greatly Improved from Recent Build, But Portrait Mode May Crash Sometimes, For Me, Its Crashing 20% (Crashing 2 Times Out Of Attempts).
UPDATE
Update:AfterFlash2
Some people's reported that gcam is crashing for them.
I have updated AfterFlash zip with some more files, if its crashing too for you, flash the included magisk modules in AfterFlash2zip.
These modules should reduce gcam crashes, for me its crashing once out of 10 attempts (10% crashes)
Ready To Flash??
Here is download link
https://drive.google.com/drive/u/0/mobile/folders/1GuDm5c8XI9L3g_nXtCjS1j-14Mdy0gv5
Read Full Post Carefully Before Crying For Help.
-------------------------------------------------------------------------------------------------------------------------------------
The original dev 'Youlinw' have updated h2os on 20 feb 2018,
I have found and easy workaround fir enabling cam 2api pixel camera with working portrait mode without force closes/crash, just need to flash two zip files which will patch boot.img and place camera related files in appropriate locations, so it won't break existing oneplus camera so there will be no conflict and gcam will not crash, as it was happening on last build.
This time, I am not updating rom, you just need to flash rom, then zip provided here.
|| Flashing instructions ||
1) wipe data, system, cache, dalvic cache (clean flash is always recommended)
2) flash the original rom
3) boot into rom, setup, disable Chinese bloatware and system apps which you don't need (don't disable baiduIME this is default keyboard)
4) install google installer, press blue circular button to install play store, once all apps are installed, login your google account, tweak the rom as you want.
5) the reboot to twrp, Flash oss cam hal enabler v1. Zip
6)reboot,use the rom for few minutes, then flash oss cam hal enabler v2. Zip
7)reboot, install camera apk given in link, then use default settinga, you can tweak if you want but that may or may not cause stability issues.
Enjoy!!
Reserved
Our device supports OIS?
Hey good work bro! @narshi shukla
I saw you on different threads before.
Can you give a brief review of this ROM..
Any bugs?
I am on Viper right now..
DivyanshuJ said:
Hey good work bro! @narshi shukla
I saw you on different threads before.
Can you give a brief review of this ROM..
Any bugs?
I am on Viper right now..
Click to expand...
Click to collapse
I have been using this build from last 3 days, excellent battery life almost 10 hour sot,
Bugs
Oneplus camera is broken now, won't save pics videos,
Third party camera can't record front camera video
Gcam records dark video as usual but third party camera are working good in rear cam video recording, except this i didn't find any bug, if anyone's finds report me
Edit: video recording working fine on both cam using third party camera app
Marvellover said:
Our device supports OIS?
Click to expand...
Click to collapse
No,
It supports electronic image stabilisation(EIS) which helps in stability of video recording.
Baseband
Which baseband should I use?
---------- Post added at 10:36 PM ---------- Previous post was at 10:15 PM ----------
I have problem with cameras (both) they crashes when i try to record video and when i'm changing options. Have you any fix for this?
cichowlasp said:
Which baseband should I use?
---------- Post added at 10:36 PM ---------- Previous post was at 10:15 PM ----------
I have problem with cameras (both) they crashes when i try to record video and when i'm changing options. Have you any fix for this?
Click to expand...
Click to collapse
1) use any baseband, it will update baseband to 1.70 no matter ok which baseband you were recently.
2) on which rom, this rom? Yes they crashes just restart the app, and as of now video recording is broken on gcam, use some third party apps, like bacon cam, open cam or any other for recording video.
What fixes have been done ?? ?
anujagarwal said:
What fixes have been done ?? ?
Click to expand...
Click to collapse
As the name suggest, Google camera mod portrait mode is added, removed supersu and removed Chinese apps,
Beside that some minor fixes like updating outdated packages, replacing some files etc
narshi shukla said:
As the name suggest, Google camera mod portrait mode is added, removed supersu and removed Chinese apps,
Beside that some minor fixes like updating outdated packages, replacing some files etc
Click to expand...
Click to collapse
Is notification led working?
Sent from my Z2 Plus using Tapatalk
Bidyadhar said:
Is notification led working?
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
yes,this is issue of oreo roms,most nougat roms should have led working.
Performance is good
But rom heats. And OSS hal is not working good.
Back to jaguar
Portrait mode was never working with h2os even with oss Hal support what setting are you using for portrait working
what about the camera crash on h2os, solved or not?
Could you add Camera2 API to Ressurection Remix 5.8.5?
Download link is here https://androidfilehost.com/?fid=817906626617958345
Thanks honestly.
Camera problem!
Is it possible to fix camera app? It's so irritating when its crash. I won't leave this ROM because the performance and baterry are awesome!
narshi shukla said:
As the name suggest, Google camera mod portrait mode is added, removed supersu and removed Chinese apps,
Beside that some minor fixes like updating outdated packages, replacing some files etc
Click to expand...
Click to collapse
Do some real work . GCam not working good . App crash is there with camera apps . Magisk was working good with 1.2.2018 built , i did installed magisk directly . And chinese apps can be removed easily on h2os . Easy to disable and remove .
So u did nothing actually .
anujagarwal said:
Do some real work . GCam not working good . App crash is there with camera apps . Magisk was working good with 1.2.2018 built , i did installed magisk directly . And chinese apps can be removed easily on h2os . Easy to disable and remove .
So u did nothing actually .
Click to expand...
Click to collapse
yes i have done nothing,will wait for you to post fixes,
Moreover,this rom is just edited by me,not build by me, i dont have source codes of this rom,moreover its zip is password protected , go see yourself,
and Gcam is Crashing because Boot.img is not properly optimized for changes that i have made,and i cant optimize as of now it is almost impossible to extract and edit, i have tried more than 50 times.
and this is not whole new rom,this is just slightly modified version.