Develop Bugs

[ROM] [5.1.x] Unofficial CyanogenMod 12.1 Updated (Z00D)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Information:
This is up to date builds of CyanogenMod 12.1 based on original work by jrior001.
Known issues:
FM Radio is unsupported.
SELinux is in permissive mode for now.
Links:
Download CyanogenMod 12.1
Download GAPPS
Device Tree
Kernel Sources
CyanogenMod Patches 1, Patches 2
Credits:
CyanogenMod
jrior001
crpalmer
And other ZF2 contributors
XDA:DevDB Information
Unofficial CyanogenMod 12.1 Updated (Z00D), ROM for the Asus ZenFone 2
Contributors
flex1911
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 12.16.5.126
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-11-12
Last Updated 2016-11-12

Reserved
Changelog:
Code:
20161112:
Updated base to .126 stock rom
Updated to last CM sources and 2016-10-01 security patch
Major SELinux update (policy is pretty raw and unstable for now, so permissive is used)
Fixed USB-OTG support (working USB disk)
Some minor updates and fixes
Please update to latest stock firmware before installing this!

Iam so glad you supported our device
Thank you very much
Hope you will compile more rom for z00d

12.1??

kjinx01 said:
12.1??
Click to expand...
Click to collapse
Because of problems with hwcomposer I did not manage to run graphics on cm13 for now. I'm looking for a solution, but I can not promise that issue somehow can be solved without sources to critical libraries.

Can you move to cm 13 soon?
---------- Post added at 01:41 AM ---------- Previous post was at 01:41 AM ----------
Hope you move to cm 13 soon
---------- Post added at 01:48 AM ---------- Previous post was at 01:41 AM ----------
I also really look forward to cm 12.1 official soon, sir

ShakiraHill said:
Can you move to cm 13 soon?
---------- Post added at 01:41 AM ---------- Previous post was at 01:41 AM ----------
Hope you move to cm 13 soon
---------- Post added at 01:48 AM ---------- Previous post was at 01:41 AM ----------
I also really look forward to cm 12.1 official soon, sir
Click to expand...
Click to collapse
Official CM is always good. But with 12.1 it's almost pointless now.

Good Work.Your rom is wonderful
Your updated cm 12.1 is very good and stable
Hope you will consider to move to compile cm 13 or official cm 12.1 for z00d as soon as possible
We will all really apreciate
Moreover,when i use music player,it crashed and stated that can't play this song
And whenever i reboot ,it has a popup of force close
Hope you take a quick look and fix this bug

Thanks for this rom. There is a slight problem i found. One of it is, when i charge the phone and it reached 80%, the notification led turns to yellow. Shouldn't the led still be red? And another one is, when the phone is on offline charging mode, the usual battery indicator doesn't appear, instead a big green empty battery with a question mark in it appears. Please verify if this problem happened to any of you. Thank you and sorry for english.

ivalno said:
Thanks for this rom. There is a slight problem i found. One of it is, when i charge the phone and it reached 80%, the notification led turns to yellow. Shouldn't the led still be red? And another one is, when the phone is on offline charging mode, the usual battery indicator doesn't appear, instead a big green empty battery with a question mark in it appears. Please verify if this problem happened to any of you. Thank you and sorry for english.
Click to expand...
Click to collapse
No, after reaching 80% it should be yellow. Although I'll test offline charging. Thanks for report!

flex1911 said:
No, after reaching 80% it should be yellow. Although I'll test offline charging. Thanks for report!
Click to expand...
Click to collapse
I don't know if I'm doing the right thing but I just wipe cache and data, and flash the rom and gapps, and reboot.
It is necessary to wipe cache and data again after flashing them? Sorry for english.

ivalno said:
I don't know if I'm doing the right thing but I just wipe cache and data, and flash the rom and gapps, and reboot.
It is necessary to wipe cache and data again after flashing them? Sorry for english.
Click to expand...
Click to collapse
Yeah, everything is right. Make sure you're running latest firmware (.126)

So there is still hope for cm13? I'll keep fingers crossed Thanks for an update btw
---------- Post added at 07:46 PM ---------- Previous post was at 07:23 PM ----------
Please update to latest stock firmware before installing this! - is that neccecary? Can i update from preivous cm12 build?

Thanks for the update, op.
There are more roms coming up for this device, just fixing some things .
Op, CM13 doesn't work, I tried it myself. However, there's something else we can still do about it. Get in touch with me, and let's work together on this.

ivalno said:
I don't know if I'm doing the right thing but I just wipe cache and data, and flash the rom and gapps, and reboot.
It is necessary to wipe cache and data again after flashing them? Sorry for english.
Click to expand...
Click to collapse
RusLion__ said:
So there is still hope for cm13? I'll keep fingers crossed Thanks for an update btw
---------- Post added at 07:46 PM ---------- Previous post was at 07:23 PM ----------
Please update to latest stock firmware before installing this! - is that neccecary? Can i update from preivous cm12 build?
Click to expand...
Click to collapse
Yes, it is necessary. You can update from previous cm12.1 only if you already have last firmware, otherwise it will not work consistently.
This ROM was built using .126 blobs, drivers and kernel, so you are required to update the firmware to .126.

RusLion__ said:
So there is still hope for cm13? I'll keep fingers crossed Thanks for an update btw
---------- Post added at 07:46 PM ---------- Previous post was at 07:23 PM ----------
Please update to latest stock firmware before installing this! - is that neccecary? Can i update from preivous cm12 build?
Click to expand...
Click to collapse
I aslo hope so
I hope some devoted devs will find a solution to this problem to compile cm 13 for z00d
We are really looking forward to cm 13 in the future,sir :'
Or at least is cm 12.1 official
#alwaysrespect
---------- Post added at 04:13 PM ---------- Previous post was at 04:08 PM ----------
jacoghi said:
Thanks for the update, op.
There are more roms coming up for this device, just fixing some things .
Op, CM13 doesn't work, I tried it myself. However, there's something else we can still do about it. Get in touch with me, and let's work together on this.
Click to expand...
Click to collapse
We are really glad to hear that there will be more roms coming up for our device
I can't wait to see them
Thank you very much for your supporting
We highly appreciate it
Moreover, we are also really looking forward to your solutions to compile cm 13 for z00d
Or at least, cm 12.1 official is also good now ;'
All best wishes for you
Hope you are healthy and lucky

Hi, thanks for your work
How is battery life compared to stock?

Greg9 said:
Hi, thanks for your work
How is battery life compared to stock?
Click to expand...
Click to collapse
I did not compare that. You can test it by yourself. If it's worse - i'll do something with cpu scaling in next build.

Op, this is it. Couldn't get ril to work yet, as I mentioned. However, it's ridiculously fast in comparison to 5.1 so I guess it's worth the shot.

Is that 6.0 for zood? Is that a dream?! Man, I hope you'll manage to get ril working

[ROM] [7.1.x] LineageOS 14.1 for H30-U10 by Syed Hassan

Lineage 14.1 For H30-U10 By Syed Hassan ​
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Installation Instructions:
> Before any modifications please take a nandroid backup of your phone so you can revert it in case anything goes wrong
> Go to recovery and wipe all partitions except SD card
> Flash the Rom zip
>Flash Gapps
>flash Optional Zips if you want
>reboot.
In case of no signals issue, flash an appropriate modemfix from codelover's thread http://forum.xda-developers.com/android/development/guide-huawei-honor-3c-h30-u10-t2837773
Download​
Gapps​
Optional​
Super Su Already Added To get root..​
Dont Forget To Hit Thanks Button If you Support My Work​
Known Issue:
Fm radio and sim2 incoming
Credit:
Hassanjavaid8181(ME)
Manjunath Yashu
Aditya Kumar
Tribetmen
Fire855
Farhung
XDA:DevDB Information
[ROM] [7.1.x] LineageOS 14.1 for H30-U10 by Syed Hassan, ROM for the Honor 3C
Contributors
hassanjavaid8181, hassanjavaid8181
Source Code: https://github.com/MTK-Kernels/android_kernel_huawei_h30u10
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2017-10-16
Last Updated 2018-01-25

links added..

Can i update from cm13 or do i need to do a clean install ? Witch twrp is minimum needed?
Thx
---------- Post added at 02:13 PM ---------- Previous post was at 02:10 PM ----------
And what means stable, is everything working ?
Vpn, Screen mirroring, camera,bt, and so on ?

Its not booting bro....Just sits on the boot logo....

GTtron816 said:
Its not booting bro....Just sits on the boot logo....
Click to expand...
Click to collapse
Did you clean flash?

hassanjavaid8181 said:
Did you clean flash?
Click to expand...
Click to collapse
Yes...wiped every thing except internal and SD card....

blubba83 said:
Can i update from cm13 or do i need to do a clean install ? Witch twrp is minimum needed?
Thx
---------- Post added at 02:13 PM ---------- Previous post was at 02:10 PM ----------
And what means stable, is everything working ?
Vpn, Screen mirroring, camera,bt, and so on ?
Click to expand...
Click to collapse
Twrp 3.1.1 would be fine
Yes most of things are working....
And you will have to do a clean flash..

I have looked at the ZIP Struktur, why you put additional apps to this Rom, Software people need can be installed by them self, no need to put titanium and solidexplorer in this Rom it only blows up the size.
Thx

I'm using the twrp by codelover which is 2.8.x is it OK.

Hi Hassan, I hope you are well. I continue with my gaaps question. Which ones should I download? I see in the information of the rom that is 7 and in the title I see 7.1. get me out of doubt please

GTtron816 said:
I'm using the twrp by codelover which is 2.8.x is it OK.
Click to expand...
Click to collapse
Yeah its OK it should work fine..

David723 said:
Hi Hassan, I hope you are well. I continue with my gaaps question. Which ones should I download? I see in the information of the rom that is 7 and in the title I see 7.1. get me out of doubt please
Click to expand...
Click to collapse
I am well.thank you
Gapps you downloaded for nouget rr would work fine for this also..
If you want to download
Arm
7.1
Pico..

hassanjavaid8181 said:
I am well.thank you
Gapps you downloaded for nouget rr would work fine for this also..
If you want to download
Arm
7.1
Pico..
Click to expand...
Click to collapse
Okay. I'm going to install this rom. I'll tell you later ..
I'm going to take the sim 2 card and install it without it to avoid failures
---------- Post added at 02:46 PM ---------- Previous post was at 02:19 PM ----------
David723 said:
Okay. I'm going to install this rom. I'll tell you later ..
I'm going to take the sim 2 card and install it without it to avoid failures
Click to expand...
Click to collapse
I could not install it, it stuck in the logo

Boot
I tried to flash this rom but it is stuck in booting logo... (TWRP 3.1.1.0)

David723 said:
Okay. I'm going to install this rom. I'll tell you later ..
I'm going to take the sim 2 card and install it without it to avoid failures
---------- Post added at 02:46 PM ---------- Previous post was at 02:19 PM ----------
I could not install it, it stuck in the logo
Click to expand...
Click to collapse
I did the wipes and reinstalled and nothing stuck in the logo

It shows installation succeeded but it won't boot....
Tried flashing 3 times....

flash that patch via recovery and report here
https://mega.nz/#!dc41wDTT!7jqlYqr2li7BeQsmj8q5kInE4a43imsuh8j-BRMv6jY

David723 said:
I did the wipes and reinstalled and nothing stuck in the logo
Click to expand...
Click to collapse
flash patch i uploaded after installing rom and report.

Thanks Hassan, some screenshots would be useful. and what about the double tap? Is it included? I'm really in love with it!

hassanjavaid8181 said:
flash patch i uploaded after installing rom and report.
Click to expand...
Click to collapse
Ok

[RECOVERY][UNOFFICIAL] TWRP 3.2.3-0 recovery - regularly updated

########## #############
Official TWRP with prebuild Kernel is available here:
https://forum.xda-developers.com/mi-mix-2/development/recovery-twrp-3-2-1-0-xiaomi-mi-mix-2-t3780525
########################
Greetings flashaholics!
As usual before flashing this TWRP make an complete backup of your system!!!
Why another TWRP?
you'll get the latest TWRP release with most recent features & bugfixes
build live from sources - no prebuild kernels/files
more partitions to backup/restore supported
made project treble compatible by adding vendor & vendor_image partitions (leaving cust partition available for legacy purposes)
double tap to wake display
survives installation of official MIUI Global/CN ROMs (read INFO section to know how to achive that result exactly)
DOWNLOAD TWRP 3.2.3-0
... please see also supplemental infos & tool downloads below in INFO section
Please leave feedback for the beta. Does it work well? Did you encounter any problems? THX
Important changes in latest 3.2.3-0 build: 20180815-2003
based on fresh MIX 2 OmniRom base files and new msm8998 common sources - speed seems to be upgraded a little
previous changelog:
TWRP 3.2.3-0 based - build on Nextgen-Networks build environment with latest kernel 4.4.78
"FrankenTab" - mixed fstab v1 & v2 layout to achive de-/encryption and also keep as much partitions available as possible
treble compatible (by adding vendor & vendor_image partitions)
backup write speed restored (80 MB/s for file systems / 110 MB/s for imaged drives) and stayed compatible with OmniRom power/storage/kernel settings
Build completely live from latest build tree files - prebuild kernel fragments not needed anymore *yay*
en-/decryption support
ADB/MTP support
display brightness fixed - it's bright again! (see detailed notes in download section if it did not work for you)
additional partitions backup & restoreable (20 overall)
doupble tap to wake display is supported
display works when booting from LOS/OmniRom/RR to recovery via menu
survives installation of official MIUI Global/CN ROMs (OTA not tested yet)
Tested and perfectly working with ROMs as follows
MIUI 8.8.9 xiaomi.eu
MIUI 8.7.x xiaomi.eu
MIUI 8.6.x xiaomi.eu
MIUI 8.6.21 CN / xiaomi.eu
MIUI 8.6.14 Global
MIUI 8.6.8 CN
MIUI 8.5.11 Global
MIUI 8.5.8 Global / CN / xiaomi.eu
MIUI 8.5.2 Global
MIUI 8.4.26 by xiaomi.eu
LineageOS 15.1 build 20180501
OmniRom 8.1.0-20180430 HOMEMADE
INFO:
official MIUI Global/CN ROMs installation survival: dont reboot after ROM installation/update - just start a new flash session and flash latest magisk beta in a separate process - thats all! (OTA survival has not been tested by now)
If your TWRP gets constantly overwritten then flash the no-verity-opt-encrypt-1.6.zip right after your flashed TWRP to your device and right after each install/update of an original XIAOMI ROM from (en.)miui.com.
Procedure not needed for xiaomi.eu based ROMs.
Download no-verity-opt-encrypt 1.6 here
To make the flashing a little more convenient I've written a little windows script that utilizes adb/fastboot and presents all recovery images in its folder for your flashing happiness
This package also contains a script to remove/bypass the pin/passcode/pattern you've set - this could help then restoring an backup and the definitely correct pin/passcode/pattern is not accepted afterwards
Download recovery-flash.cmd 1.29 here
need an matching firmware for your device?
Download here from the Xiaomi Firmware Updater project on XDA (downloads in post 2)
Some very clarifying official information about en-/decryption types and how it works: https://source.android.com/security/encryption/
take a look here to have a full backup with internal storage covered also: [URL="https://forum.xda-developers.com/android/apps-games/app-twrp-tipatch-backup-internal-t3831217]Info & Download TiPatch[/URL]
For more detailed changelogs visit the download page.
Updated versions will be announced in this thread.
Instructions how to setup & build your own TWRP:
https://github.com/nextgen-networks/android_device_xiaomi_chiron-OMNI/blob/android-8.1_v10/README.md
Sourcecode (updated 2018-08-15 / v13):
Modified TWRP: https://github.com/nextgen-networks/android_bootable_recovery
Device-Tree (Device): https://github.com/nextgen-networks/android_device_xiaomi_chiron-OMNI
Device-Tree (SOC): https://github.com/nextgen-networks/android_device_xiaomi_msm8998-common
Kernel: https://github.com/omnirom/android_kernel_xiaomi_msm8998
Vendor-Tree (Device/SOC): https://github.com/DonkeyCoyote/proprietary_vendor_xiaomi

Thanks, works great so far.
As mentioned in the Lineage thread I intend to you encryption, neither the MIUI nor the iceman TWRP recoveries manage to mount my encrypted LineageOS storage, they just fail after the prompt.
Under this recovery I don't get a prompt.
Just wanted to mention, I will use it and test it anyway if encryption is not working yet, I will manage somehow.

Iam on Lineage. But after flashing TWRP not starting, only the fastboot mode
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
https://www.nextgen-networks.de/de/...17-twrp-recovery-3-2-1-0-universal-build.html
It this the right Recovery?

Feenfleisch said:
Iam on Lineage. But after flashing TWRP not starting, only the fastboot mode
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
https://www.nextgen-networks.de/de/...17-twrp-recovery-3-2-1-0-universal-build.html
It this the right Revolver?
Click to expand...
Click to collapse
Hey @Feenfleisch,
yes it is the correct link.
What exact commands did you use to flash TWRP?
Did the device does not boot at all or only when booting to recovery?

Only then ist booting recovery. Ich flash with Flashify
---------- Post added at 07:02 PM ---------- Previous post was at 06:57 PM ----------
The TWRP fromm the last link work (twrp-3.2.1-0-chiron_raupe-20180104-1520.img), the TWRP from your first Link not work. Maybay the wrong link?

Feenfleisch said:
Only then ist booting recovery. Ich flash with Flashify
---------- Post added at 07:02 PM ---------- Previous post was at 06:57 PM ----------
The TWRP fromm the last link work (twrp-3.2.1-0-chiron_raupe-20180104-1520.img), the TWRP from your first Link not work. Maybay the wrong link?
Click to expand...
Click to collapse
Uuuuuuups
Link leaded to Mi MIX instead of Mi MIX 2 download.
I fixed that ...
Thanks for the hint.
I've heard about several issues with flashify - better use fastboot.

USB MTP/ADB Sideload does not seem to work for me. IceMan's TWRP does.

Uploading to Google drive latest release
https://drive.google.com/file/d/1egaT1P66oEc1M0_S-tNXjG43nTLCDr3z/view?usp=drivesdk

DaCoolX said:
USB MTP/ADB Sideload does not seem to work for me. IceMan's TWRP does.
Click to expand...
Click to collapse
I'll investigate that (expect an update for this issue next week).
Thanks for reporting!

allrockedout said:
Downloads taking like 20 minutes I'll upload it to Google drive when done....
https://drive.google.com/file/d/1szvkblRyxxcVqVSqu7ejxhIkd07SUIqD/view?usp=drivesdk
Click to expand...
Click to collapse
... hmm this is very unusual - tested the speed to server and it took me a couple of seconds.
If you host the file as mirror please keep an eye for updated versions in future.

raupe said:
... hmm this is very unusual - tested the speed to server and it took me a couple of seconds.
If you host the file as mirror please keep an eye for updated versions in future.
Click to expand...
Click to collapse
Yeah I'll keep it updated of course. Plan on keeping this phone for a while. So I flashed twrp 3.2.1-0 image in twrp rebooted back into twrp..now my file storage is encrypted again. So I'll have to wipe data again... Ugh ok I'll test it out.

Cheers - downloading now.
This is vanilla TWRP right? Tired of seeing different themes, Chinese or other "customizations" in other TWRPs.
Sent from Xiaomi Mi Mix 2 @ LineageOS 14.1

I had to flash back to epic twrp. Couldn't remove encyption. After wiping data and rebooting to system than back to twrp. Everything was encrypted.

AndyYan said:
Cheers - downloading now.
This is vanilla TWRP right? Tired of seeing different themes, Chinese or other "customizations" in other TWRPs.
Sent from Xiaomi Mi Mix 2 @ LineageOS 14.1
Click to expand...
Click to collapse
Jepp this is stock/vanilla TWRP.
The only change i've made was to activate NTFS support some Qualcom specific stuff and disable the annoying "mouse" cursor that is present on default builds.
As you can read in comments (here and in Mi MIX forum) there are some hick-hacks with encryption.
This take a more deep dive because of the huge amount of variants the encryption has made from (a.k.a.: every OS build of MIUI/LOS/RR/Epic/mi-globe may use an different approach/driver for encryption).
There seems to be an problem with software and hardware encryption that conflicts with each other (see LineageOS change id 199842)

allrockedout said:
I had to flash back to epic twrp. Couldn't remove encyption. After wiping data and rebooting to system than back to twrp. Everything was encrypted.
Click to expand...
Click to collapse
Greetings @allrockedout!
Thanks for your report!
Just to figure out what leads to this behavior - could you give some information about your current firmware version, build date of the epic rom you used and what kernel the device info states?
Thanks in advance!

raupe said:
Greetings @allrockedout!
Thanks for your report!
Just to figure out what leads to this behavior - could you give some information about your current firmware version, build date of the epic rom you used and what kernel the device info states?
Thanks in advance!
Click to expand...
Click to collapse
I'm on Global Developer beta

Greetings readers!
I've build a new version today that contains some different en-/decryption libraries.
Please give it a shot and as always: Feedback is very welcome
Download: https://www.nextgen-networks.de/de/downloads/category/15-xiaomi-mi-mix-2.html
For those with touchscreen issues:
There have been made no kernel changes so dont expect any changes here.

is it suit for oreo cause my mix2 already update to 8.0, developer edition

ShawnLukeLee said:
is it suit for oreo cause my mix2 already update to 8.0, developer edition
Click to expand...
Click to collapse
Will be fine

ShawnLukeLee said:
is it suit for oreo cause my mix2 already update to 8.0, developer edition
Click to expand...
Click to collapse
Jipp, should work with 8.0/8.1 - sources used for building are 8.1 based.
I can give more detailed feedback if I'm selected for XIAOMI Android 8 global dev ROM next week.

[ROM][9.0][UNOFFICIAL] CitrusCAF-v5.0-KeyLime

Theory says - CAF based ROM should be the ultimate in performance & battery and this is currently the only CAF based rom available that gets regular updates and being actively worked on.
1. ROM Sources: https://github.com/Citrus-CAF
2. Kernel: https://github.com/Krieg-Kernel
(Slider is not working)
Download here: https://androidfilehost.com/?fid=11410963190603872951 (tested on my own DECRYPTED OP5 with OB21)
1. Wipe cache/system/data
2. Flash ROM zip
3. Boot to ROM
4 (OPTIONAL) reboot to TWRP, flash gapps+Magisk
5. reboot
This is only for the flashaholics right now! The rom works fine but the developers claims is still in its infant phase!

I really was hesitant whether to create a whole new thread for this...it was really the 'naughtiest' rom to build so....try it at your own risk....thermonuclear war, asteroid crashing on earth etc etc - don't blame me

great rom :good:
---------- Post added at 03:16 AM ---------- Previous post was at 03:11 AM ----------
quake73 said:
I really was hesitant whether to create a whole new thread for this...it was really the 'naughtiest' rom to build so....try it at your own risk....thermonuclear war, asteroid crashing on earth etc etc - don't blame me
Click to expand...
Click to collapse
how about using firmware version?

jahidinbedod said:
great rom :good:
---------- Post added at 03:16 AM ---------- Previous post was at 03:11 AM ----------
how about using firmware version?
Click to expand...
Click to collapse
added OB21 to my OP but stable 5.1.7 works fine, too

quake73 said:
added OB21 to my OP but stable 5.1.7 works fine, too
Click to expand...
Click to collapse
ok
I will try it :good:
---------- Post added at 04:18 AM ---------- Previous post was at 03:29 AM ----------
@quake73
bootlop after flash gapps+magisk
what using gapps+magisk version?

jahidinbedod said:
ok
I will try it :good:
---------- Post added at 04:18 AM ---------- Previous post was at 03:29 AM ----------
@quake73
bootlop after flash gapps+magisk
what using gapps+magisk version?
Click to expand...
Click to collapse
like i said...it works on my DECRYPTED OP5....try first flashing (after wiping cache/data/system) just the rom zip file

quake73 said:
like i said...it works on my DECRYPTED OP5....try first flashing (after wiping cache/data/system) just the rom zip file
Click to expand...
Click to collapse
yes I did
after booting up to the home screen
reboot recovery right?
then flash gapps + magisk
but not boot up (restart the logo)
what is the gapps + magisk version?
i use nano + magisk 17.1 stable
---------- Post added at 05:18 AM ---------- Previous post was at 04:33 AM ----------
@quake73
success using magisk 17.3 :good::good::good:

11/30 build 54MB? Bito treasures in your androidfilehost folder. Bliss. Hmmm.

same here,
afh link is showing CitrusCAF-v5.0-KeyLime-Pie-cheeseburger-COMMUNITY-20181130-2017.zip
for the OnePlus OnePlus 5, by quake73 = 54.9 MB ??
after downloading it is showing the archive is corrupt..

In afh click on quakes name, then oneplus5. There is a 11/29 build. Along with some other stuff. Havent tried it.

The Download file is 54MB??It must be for a Pen Phone
---------- Post added at 12:13 PM ---------- Previous post was at 11:16 AM ----------
Here is a link to 1129 Build 677MB
https://androidfilehost.com/?fid=11410963190603862312
---------- Post added at 12:38 PM ---------- Previous post was at 12:13 PM ----------
Clean installed 1129 Flash
ROM
Gapps
xXxNoverity
Magisk17.3
All in one go, boots up does all setting connects to wifi etc. looks OK

Yeah, you are right, 30/11 is only 54MB, I don't know how did that happen, I apologize. I guess it was some glitch with AFH. It is corrected now.
P.S. Magisk doesn't seem to work on 30/11. I modified the first post to point to the 29/11.

1129 Build
Seems like there is no setting for buttons like long press for menu etc. No system dark team. Superbackup crashed after around a dozen apps restored and I could not get it to not crash after that. Magisk17.3 is working fine. (I tried once to dirtyflash over AospExtended 6.0 it seemed to work fine but then the screen became unstable:laugh......No screen problems or really anything else on clean flash except with my backup app. Going back to AospExtended 6.0 for Now.
Thank you for making this available for testing CAF was a new thing to me(I have the base ROM setup backed up on the phone just in case)

thaidroid said:
1129 Build
Seems like there is no setting for buttons like long press for menu etc. No system dark team. Superbackup crashed after around a dozen apps restored and I could not get it to not crash after that. Magisk17.3 is working fine. (I tried once to dirtyflash over AospExtended 6.0 it seemed to work fine but then the screen became unstable:laugh......No screen problems or really anything else on clean flash except with my backup app. Going back to AospExtended 6.0 for Now.
Thank you for making this available for testing CAF was a new thing to me(I have the base ROM setup backed up on the phone just in case)
Click to expand...
Click to collapse
I do the same
I also have fully set up aex backed up for emergency restoring to a functional rom. As for the features - I believe the devs will slowly add them in the future. I follow their telegram channel, they still haven't released any official build for any device, i'd say it's still in its alpha phase. I hope they will continue their good work, I too am curious if the CAF base can give any measurable difference.

Added to the OnePlus 5 Index Thread here.

Can you keep updating?
Can you keep updating?

[email protected] said:
Can you keep updating?
Click to expand...
Click to collapse
Sure, I'll try making a new build whenever the Citrus' devs add something new or CAF sources get updated.

Nice, been waiting for a CAF based ROM to try and see the differences.
Thank you very much!

New build, based on the latest CAF 8x98 sources (LA.UM.7.4.r1-04100-8x98.0). The kernel is Krieg v2.8. Enjoy!
https://androidfilehost.com/?fid=11410963190603868029

quake73 said:
New build, based on the latest CAF 8x98 sources (LA.UM.7.4.r1-04100-8x98.0). The kernel is Krieg v2.8. Enjoy!
https://androidfilehost.com/?fid=11410963190603868029
Click to expand...
Click to collapse
good job bro :good:
i like based on CAF
wait for official release

Lineage os

Do not have the device at the moment I have just ordered it. But am currently building lineage os 17.1 so if all goes well will need testers

Awesome, I'm down to test I'm pretty good at finding bugs and ****, let me know. As long as it doesn't brick my phone I'm down, my MI 9 got perma bricked from Lineage but I'm not sure if it was from Lineage or I just got a defective phone. Probably was just a defective phone.

Looking forward to it!

News about this rom? @jonnieitis if you Need a tester contact me
---------- Post added at 05:13 PM ---------- Previous post was at 05:13 PM ----------
News about this rom? @jonnieitis if you Need a tester contact me

alexz230 said:
News about this rom? @jonnieitis if you Need a tester contact me
---------- Post added at 05:13 PM ---------- Previous post was at 05:13 PM ----------
News about this rom? @jonnieitis if you Need a tester contact me
Click to expand...
Click to collapse
if someone can tell me how to port lineage and create device threes i will build lineage , i already have lineage os's repo downloaded

I've never built custom ROMs before. However following the Lineage Build Guide for a similar device and following the building for new device guide. I hope to succeed.
I am in the process of downloading Lineage. I will need testers because I don't have the phone. The trees I've found are HERE.
Once I have a build (even untested) I'll create a thread in the development part and then hopefully more testers will arrive
---------- Post added at 03:40 PM ---------- Previous post was at 03:38 PM ----------
@SingleSliceOfCake check out the guide I mentioned above with the device trees I collected @jonnieitis I noticed you'd done a build. Are your sources similar to mine?

i've done the tree and vendor for monet for myself and it builds Resurrection Remix succesfully, but phone is getting bootloop after flashing it

T3cheN said:
i've done the tree and vendor for monet for myself and it builds Resurrection Remix succesfully, but phone is getting bootloop after flashing it
Click to expand...
Click to collapse
where are your tree and vendor for monet. Maybe I can help

Robert314 said:
where are your tree and vendor for monet. Maybe I can help
Click to expand...
Click to collapse
Tree:
Code:
https://github.com/T3ch3N/device-xiaomi-monet
Vendor:
Code:
https://github.com/T3ch3N/vendor-xiaomi-monet

Hi, any news on this. I would love to help to get lineage os running. I'm not a dev, but i build roms from sources in the past. Are these vendor kernel and device tree tested?

Interested in testing as well. Cheers!