I tried to root but failed
here's what Download mode says on top
ODIN Mode
PRODUCT NAME SCH-T999
Custom Binary Download: NO
Current Binary: Samsung Official
System Status: Official
Qualcomm secureboot: Enable
Warranty Bit: 0
Booterloader AP SWREV: 1
Nope
Sent from my SGH-M919 using Tapatalk
It doesn't look like it is.
I have a Galaxy Tab Pro 8.4 rooted etc and recently decided to try a new ROM. I had TWRP custom recovery on it and worked fine originally. Unfortunately after flashing the new ROM, it froze and after rebooting it, I no longer have a recovery nor will it boot. It simply goes to download mode and says the following:
Could not do normal boot.
ODIN Mode
Product Name: SM-T320
CURRENT BINARY: CUSTOM
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRENTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC START
I've tried re-flashing custom recovery (TWRP) using ODIN and flashed successfully but all it will do is flash TEAMWIN for a split over and over. I wanted to try CWR but Odin only flashed md5 or tar files. PLEASE HELP!!!!
try another version of TWRP. I think there are two versions on their website, 2.7.1.0 and 2.7.0.0 or similar.
also make sure you are flashing the correct recovery for your device (wifi vs LTE model)
otgt said:
I have a Galaxy Tab Pro 8.4 rooted etc and recently decided to try a new ROM. I had TWRP custom recovery on it and worked fine originally. Unfortunately after flashing the new ROM, it froze and after rebooting it, I no longer have a recovery nor will it boot. It simply goes to download mode and says the following:
Could not do normal boot.
ODIN Mode
Product Name: SM-T320
CURRENT BINARY: CUSTOM
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRENTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC START
I've tried re-flashing custom recovery (TWRP) using ODIN and flashed successfully but all it will do is flash TEAMWIN for a split over and over. I wanted to try CWR but Odin only flashed md5 or tar files. PLEASE HELP!!!!
Click to expand...
Click to collapse
The cwm recovery in the original development can be flashed with Odin. Just unzip and flash (it is just a zip if a tar.md5 file).
crpalmer said:
The cwm recovery in the original development can be flashed with Odin. Just unzip and flash (it is just a zip if a tar.md5 file).
Click to expand...
Click to collapse
OK Great I was finally able to flash CWM (Attached) using ODIN. New Issue. I m unable to access the internal memory. If i go to browse internal SD memory, it shown nothing and reboots, and it does the same when I try to flash a ROM. What am i missing?
Any help would be greatly appreciated...
Did you try to flash the official rom ?
1) Get it here : http://www.sammobile.com/firmwares/
2) Type : SM-T320 in middle right search box (not top one)
3) findout your Country/Carrier from your unit
** you may need register to download .
Hope this help. Thanks !
Long story short I accidentally flashed lollipop firmware for the S4 gt-19500. I tried flashing 4.4.4 stock with odin but it keeps failing.
Here is what my phone says:
ODIN MODE
PRODUCT NAME: SGH-M919
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLED
eMMC BURST MODE: ENABLED
JayConcept said:
Long story short I accidentally flashed lollipop firmware for the S4 gt-19500. I tried flashing 4.4.4 stock with odin but it keeps failing.
Here is what my phone says:
ODIN MODE
PRODUCT NAME: SGH-M919
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLED
eMMC BURST MODE: ENABLED
Click to expand...
Click to collapse
What version of Odin are you using? And which part is it failing on? Try using an older version of Odin. Like Odin V1.83.
Flashed my root s6 to new official MM6.0.1 firmware from SamFirm using Odin
Device wont boot only see samsung logo then takes me to Android Recovery this is what i see:
Android Recovery
MMB29K.G925TUVU3ED1
samsung/zeroltetmo/zeroltetmo
6.0.1/MMB29K/G925TUVU3EPD1
user/release-keys
...
Supported API: 3
Device does not have DRK, contact to SW PL
Please flash ENG binary then install DRK
It allows me to go into download mode but every time i flash a firmware i get same DRK issue...
Download Mode shows:
ODIN MODE
PRODUCT NAME: SM-G925T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0304)
RP SWREV: B:3 K:2 S:2
already tried...
http://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306
http://forum.xda-developers.com/tmo.../g925t-4-files-firmware-6-0-1-update-t3357408
and flashing other official software using odin but no luck...
hello guys i have this problem in my gt i9190. the battery charge ran out and now I have bootloader. I could only install a ROM through odin without error but it does not give me access to the system, I can access recovery and install custom recovery. any solution
Odin mode
Product Name: gt-i9190
Current binary: samsung official
System statud: custom
Knox kerner lock: 0x0
Knox warranty void: 0x1
Csb-config-lsb: 0x30
Bootloader ap swrev: 2
Write protection: enable
A$ApFlako said:
hello guys i have this problem in my gt i9190. the battery charge ran out and now I have bootloader. I could only install a ROM through odin without error but it does not give me access to the system, I can access recovery and install custom recovery. any solution
Odin mode
Product Name: gt-i9190
Current binary: samsung official
System statud: custom
Knox kerner lock: 0x0
Knox warranty void: 0x1
Csb-config-lsb: 0x30
Bootloader ap swrev: 2
Write protection: enable
Click to expand...
Click to collapse
Install TWRP recovery through Odin and flash any custom rom
Here is the latest one for I9190
https://dl.twrp.me/serrano3gxx/twrp-3.3.1-0-serrano3gxx.img.tar
Arslan140 said:
Install TWRP recovery through Odin and flash any custom rom
Here is the latest one for I9190
https://dl.twrp.me/serrano3gxx/twrp-3.3.1-0-serrano3gxx.img.tar
Click to expand...
Click to collapse
i tried but don't work. stay in the logo of LOS