Develop Bugs

[Q] HELP!!! Phone stuck on odin mode

So I recently bought a galaxy s3 from a friend and tried rooting it today, but something went horribly wrong and it won't work.
It tells me "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried doing that and I can not get it to work. The phone won't even connect to Kies... HELP
This is what it says at the top of the screen.
ODIN Mode
Product name: SPH-L710
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
SYSTEM STATUS: Official
Dualcomm Secureboot: Enable
Warranty Bit: 0
Bootloader RP SWREV: 1
PLEASE HELP SOON!!!

Root/Recovery via ODIN stuck at recovery.img push
Jezdan said:
So I recently bought a galaxy s3 from a friend and tried rooting it today, but something went horribly wrong and it won't work.
It tells me "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried doing that and I can not get it to work. The phone won't even connect to Kies... HELP
This is what it says at the top of the screen.
ODIN Mode
Product name: SPH-L710
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
SYSTEM STATUS: Official
Dualcomm Secureboot: Enable
Warranty Bit: 0
Bootloader RP SWREV: 1
PLEASE HELP SOON!!!
Click to expand...
Click to collapse
Bump!
I am using the GS3 Toolkit v7.5.1 on a Sprint SPH-L710 totally stock untouched ROM.
I kinda made an alteration by adding the TWRP Recovery v2.6.3.1 for this Sprint GS3 variant, and renamed it to the TWRP recovery included with the Toolkit i.e. TWRP 2.5.0.0
Now while going through the Root/Recovery (ALLINONE) option, when Odin comes up, it sends the boot.img fine, but is now stuck on sending down recovery.img.
But I don't know enough about Odin or the GS3, to know if I can just shut down Odin, and it'll trigger the phone to reboot and I can not be sneaky, replace the original recovery, and try again?
This is what my phone says on the "Downloading..." screen
Code:
[COLOR="Red"][B]ODIN Mode[/B][/COLOR]
Product name: SPH-L710
Custom Binary Download: [B][COLOR="Green"]No[/COLOR][/B]
Current Binary: SAMSUNG Official
SYSTEM STATUS: Official
Qualcomm Secureboot: ENABLE
Can I shut down Odin, and manually reboot the phone to the Download mode, and repeat the process?
PLEASE Help!

Stuck at Samsung Logo screen after flashing back to stock firmware

This is what happened:
First I had Android 4.3 with KNOX
Then I flashed CyanogenMOD 11
I hated CyanogenMOD and tried to go back to stock firmware.
I downloaded the stock firmware from samfirmware.com and flashed with ODIN 3.09
Now i'm stuck on the Samsung Logo Boot Screen.
I have tried:
Reflashing
Using KIES emergency firmware recovery
Boot using safe mode.
Can you guys please help!?

Any error message in Odin? What is your current bootloader and which exact firmware are you trying to flash?

Androidwizzard said:
Any error message in Odin? What is your current bootloader and which exact firmware are you trying to flash?
Click to expand...
Click to collapse
CURRENT BINARY: Custom
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 1
AP SWREV: A2
Trying to get stock Samsung firmware N7100UBUEMK4_N7100ZTOEMK3_ZTO
Odin does not shows error message...

RAFAMP said:
CURRENT BINARY: Custom
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 1
AP SWREV: A2
Trying to get stock Samsung firmware N7100UBUEMK4_N7100ZTOEMK3_ZTO
Odin does not shows error message...
Click to expand...
Click to collapse
As your Knox counter says 1 I suppose you are trying to flash an older knox-enabled bootloader over a newer one.
Easiest way to succeed is to flash 4.4.2 firmware instead.

[Q] Galaxy Tab Pro 8.4 Stuck In Download Mode

I have a Galaxy Tab Pro 8.4 rooted etc and recently decided to try a new ROM. I had TWRP custom recovery on it and worked fine originally. Unfortunately after flashing the new ROM, it froze and after rebooting it, I no longer have a recovery nor will it boot. It simply goes to download mode and says the following:
Could not do normal boot.
ODIN Mode
Product Name: SM-T320
CURRENT BINARY: CUSTOM
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRENTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC START
I've tried re-flashing custom recovery (TWRP) using ODIN and flashed successfully but all it will do is flash TEAMWIN for a split over and over. I wanted to try CWR but Odin only flashed md5 or tar files. PLEASE HELP!!!!

try another version of TWRP. I think there are two versions on their website, 2.7.1.0 and 2.7.0.0 or similar.
also make sure you are flashing the correct recovery for your device (wifi vs LTE model)

otgt said:
I have a Galaxy Tab Pro 8.4 rooted etc and recently decided to try a new ROM. I had TWRP custom recovery on it and worked fine originally. Unfortunately after flashing the new ROM, it froze and after rebooting it, I no longer have a recovery nor will it boot. It simply goes to download mode and says the following:
Could not do normal boot.
ODIN Mode
Product Name: SM-T320
CURRENT BINARY: CUSTOM
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRENTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC START
I've tried re-flashing custom recovery (TWRP) using ODIN and flashed successfully but all it will do is flash TEAMWIN for a split over and over. I wanted to try CWR but Odin only flashed md5 or tar files. PLEASE HELP!!!!
Click to expand...
Click to collapse
The cwm recovery in the original development can be flashed with Odin. Just unzip and flash (it is just a zip if a tar.md5 file).

crpalmer said:
The cwm recovery in the original development can be flashed with Odin. Just unzip and flash (it is just a zip if a tar.md5 file).
Click to expand...
Click to collapse
OK Great I was finally able to flash CWM (Attached) using ODIN. New Issue. I m unable to access the internal memory. If i go to browse internal SD memory, it shown nothing and reboots, and it does the same when I try to flash a ROM. What am i missing?

Any help would be greatly appreciated...

Did you try to flash the official rom ?
1) Get it here : http://www.sammobile.com/firmwares/
2) Type : SM-T320 in middle right search box (not top one)
3) findout your Country/Carrier from your unit
** you may need register to download .
Hope this help. Thanks !

GT-I9195 Critical Bootloop and Recovery issue!!!

Samsung S4 Mini (GT-I9195)
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: ENBALE
Flashing issues:
on odin i can flash most of firmwares and finish but the phone yet not booting up
if i tried diffrent csc which got a larger hidden image it wouldnt format or change the pit even tho if i do it with same original csc
i tried most of pits
on heimdall
cannot use the pit anyways even the pit if i download from the phone after detection - cannot repartition
General
i can boot into download mode
i cannot boot into recovery - blue font recovery booting..... but getting restarted after a while
tried most of 4 files firmware but no hope
it seems im stuck on kitkat 4.4.2 since i get binary error on odin as if downgrading
tried different kernel and custom recoveries and even cf auto root but after finishing the flash yet on same issue
DBT is original region of phone
Thanks in Advance

Bootloader loock please help

hello guys i have this problem in my gt i9190. the battery charge ran out and now I have bootloader. I could only install a ROM through odin without error but it does not give me access to the system, I can access recovery and install custom recovery. any solution
Odin mode
Product Name: gt-i9190
Current binary: samsung official
System statud: custom
Knox kerner lock: 0x0
Knox warranty void: 0x1
Csb-config-lsb: 0x30
Bootloader ap swrev: 2
Write protection: enable

A$ApFlako said:
hello guys i have this problem in my gt i9190. the battery charge ran out and now I have bootloader. I could only install a ROM through odin without error but it does not give me access to the system, I can access recovery and install custom recovery. any solution
Odin mode
Product Name: gt-i9190
Current binary: samsung official
System statud: custom
Knox kerner lock: 0x0
Knox warranty void: 0x1
Csb-config-lsb: 0x30
Bootloader ap swrev: 2
Write protection: enable
Click to expand...
Click to collapse
Install TWRP recovery through Odin and flash any custom rom
Here is the latest one for I9190
https://dl.twrp.me/serrano3gxx/twrp-3.3.1-0-serrano3gxx.img.tar

Arslan140 said:
Install TWRP recovery through Odin and flash any custom rom
Here is the latest one for I9190
https://dl.twrp.me/serrano3gxx/twrp-3.3.1-0-serrano3gxx.img.tar
Click to expand...
Click to collapse
i tried but don't work. stay in the logo of LOS