I have a Galaxy Tab Pro 8.4 rooted etc and recently decided to try a new ROM. I had TWRP custom recovery on it and worked fine originally. Unfortunately after flashing the new ROM, it froze and after rebooting it, I no longer have a recovery nor will it boot. It simply goes to download mode and says the following:
Could not do normal boot.
ODIN Mode
Product Name: SM-T320
CURRENT BINARY: CUSTOM
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRENTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC START
I've tried re-flashing custom recovery (TWRP) using ODIN and flashed successfully but all it will do is flash TEAMWIN for a split over and over. I wanted to try CWR but Odin only flashed md5 or tar files. PLEASE HELP!!!!
try another version of TWRP. I think there are two versions on their website, 2.7.1.0 and 2.7.0.0 or similar.
also make sure you are flashing the correct recovery for your device (wifi vs LTE model)
otgt said:
I have a Galaxy Tab Pro 8.4 rooted etc and recently decided to try a new ROM. I had TWRP custom recovery on it and worked fine originally. Unfortunately after flashing the new ROM, it froze and after rebooting it, I no longer have a recovery nor will it boot. It simply goes to download mode and says the following:
Could not do normal boot.
ODIN Mode
Product Name: SM-T320
CURRENT BINARY: CUSTOM
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRENTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC START
I've tried re-flashing custom recovery (TWRP) using ODIN and flashed successfully but all it will do is flash TEAMWIN for a split over and over. I wanted to try CWR but Odin only flashed md5 or tar files. PLEASE HELP!!!!
Click to expand...
Click to collapse
The cwm recovery in the original development can be flashed with Odin. Just unzip and flash (it is just a zip if a tar.md5 file).
crpalmer said:
The cwm recovery in the original development can be flashed with Odin. Just unzip and flash (it is just a zip if a tar.md5 file).
Click to expand...
Click to collapse
OK Great I was finally able to flash CWM (Attached) using ODIN. New Issue. I m unable to access the internal memory. If i go to browse internal SD memory, it shown nothing and reboots, and it does the same when I try to flash a ROM. What am i missing?
Any help would be greatly appreciated...
Did you try to flash the official rom ?
1) Get it here : http://www.sammobile.com/firmwares/
2) Type : SM-T320 in middle right search box (not top one)
3) findout your Country/Carrier from your unit
** you may need register to download .
Hope this help. Thanks !
Long story short I accidentally flashed lollipop firmware for the S4 gt-19500. I tried flashing 4.4.4 stock with odin but it keeps failing.
Here is what my phone says:
ODIN MODE
PRODUCT NAME: SGH-M919
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLED
eMMC BURST MODE: ENABLED
JayConcept said:
Long story short I accidentally flashed lollipop firmware for the S4 gt-19500. I tried flashing 4.4.4 stock with odin but it keeps failing.
Here is what my phone says:
ODIN MODE
PRODUCT NAME: SGH-M919
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLED
eMMC BURST MODE: ENABLED
Click to expand...
Click to collapse
What version of Odin are you using? And which part is it failing on? Try using an older version of Odin. Like Odin V1.83.
Flashed my root s6 to new official MM6.0.1 firmware from SamFirm using Odin
Device wont boot only see samsung logo then takes me to Android Recovery this is what i see:
Android Recovery
MMB29K.G925TUVU3ED1
samsung/zeroltetmo/zeroltetmo
6.0.1/MMB29K/G925TUVU3EPD1
user/release-keys
...
Supported API: 3
Device does not have DRK, contact to SW PL
Please flash ENG binary then install DRK
It allows me to go into download mode but every time i flash a firmware i get same DRK issue...
Download Mode shows:
ODIN MODE
PRODUCT NAME: SM-G925T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0304)
RP SWREV: B:3 K:2 S:2
already tried...
http://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306
http://forum.xda-developers.com/tmo.../g925t-4-files-firmware-6-0-1-update-t3357408
and flashing other official software using odin but no luck...
Samsung S4 Mini (GT-I9195)
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: ENBALE
Flashing issues:
on odin i can flash most of firmwares and finish but the phone yet not booting up
if i tried diffrent csc which got a larger hidden image it wouldnt format or change the pit even tho if i do it with same original csc
i tried most of pits
on heimdall
cannot use the pit anyways even the pit if i download from the phone after detection - cannot repartition
General
i can boot into download mode
i cannot boot into recovery - blue font recovery booting..... but getting restarted after a while
tried most of 4 files firmware but no hope
it seems im stuck on kitkat 4.4.2 since i get binary error on odin as if downgrading
tried different kernel and custom recoveries and even cf auto root but after finishing the flash yet on same issue
DBT is original region of phone
Thanks in Advance
Well I’ve been at this for a week now trying to figure out why I can’t flash any custom roms. Can anyone lend a hand? each time I flash a rom through TWRP everything goes smoothly until after the boot screen the roms just load for endless hours. Thanks in advance guys.
I’m currently on a Stock 4.4.2
I’m rooted with Chainfire SuperSu V2.82
Odin Mode
Product name: SM-T217S
Current Binary: Custom
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 3
Write Protection: Enable