I tried to root but failed
here's what Download mode says on top
ODIN Mode
PRODUCT NAME SCH-T999
Custom Binary Download: NO
Current Binary: Samsung Official
System Status: Official
Qualcomm secureboot: Enable
Warranty Bit: 0
Booterloader AP SWREV: 1
Nope
Sent from my SGH-M919 using Tapatalk
It doesn't look like it is.
Related
I have the latest 4.3 firmware (UVUEMJC). Anyway, I wanted to see if I could root via CF-AutoRoot. However, Odin for some reason is not detecting the phone in download mode. Interestingly, the phone is detected by the computer in either Recovery mode or when in TouchWiz. I think Knox may have something to do with this.
Odin Mode
Product Name: SGH-T999
Custom Binary Download: Yes (2 counts)
Current Binary: Samsung Official
System Status: Custom
QualComm SecureBoot: Enable
Warranty Bit: 1
Bootloader RP SWREV: 1
So how did you trip your Counter ? Was it before you did the Stock UVUEMJC upgrade ? Anyway, what precise errors do you get when you say ODIN does not detect ?
Also have you considered the leaked 4.3 build that has KNOX removed ? Doc Holliday has a thread for that.
Vigz said:
I have the latest 4.3 firmware (UVUEMJC). Anyway, I wanted to see if I could root via CF-AutoRoot. However, Odin for some reason is not detecting the phone in download mode. Interestingly, the phone is detected by the computer in either Recovery mode or when in TouchWiz. I think Knox may have something to do with this.
Odin Mode
Product Name: SGH-T999
Custom Binary Download: Yes (2 counts)
Current Binary: Samsung Official
System Status: Custom
QualComm SecureBoot: Enable
Warranty Bit: 1
Bootloader RP SWREV: 1
Click to expand...
Click to collapse
Knox is not installed.
Issue is likely driver related. What version are you using?
Just an FYI, this is the same guy from the OTA and Debrick threads. His post was a 2:26 (my time EST), so chances are he has continued his question since in one of those threads.
Woody said:
Just an FYI, this is the same guy from the OTA and Debrick threads. His post was a 2:26 (my time EST), so chances are he has continued his question since in one of those threads.
Click to expand...
Click to collapse
Thanks Woody. Unsubscribed and moving on.
Hi,
I had stock 4.3 firmware on my att i747 galaxy s3, then I decided to flash cyanogenmod. everything went well but i dont really like it.
Now I want to go back to stock. I tried flashing the stock rom with odin but it fails and it says this on the phone:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (2 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER RP SWREV: 2
SW REV CHECK FAIL : Fused 2 > Binary 0
The android version it shows is 4.3.1 and im able to use it normally with the cyanogenmod.
What can I do to flash a stock rom back?
EDIT: used triangle away and the custom binary download says "no" now and the current binary says "samsung official" but still get the same problem.
Thank You
Watch out with the double threads. Some people can get cranky about it.
Long story short I accidentally flashed lollipop firmware for the S4 gt-19500. I tried flashing 4.4.4 stock with odin but it keeps failing.
Here is what my phone says:
ODIN MODE
PRODUCT NAME: SGH-M919
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLED
eMMC BURST MODE: ENABLED
JayConcept said:
Long story short I accidentally flashed lollipop firmware for the S4 gt-19500. I tried flashing 4.4.4 stock with odin but it keeps failing.
Here is what my phone says:
ODIN MODE
PRODUCT NAME: SGH-M919
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLED
eMMC BURST MODE: ENABLED
Click to expand...
Click to collapse
What version of Odin are you using? And which part is it failing on? Try using an older version of Odin. Like Odin V1.83.
Flashed my root s6 to new official MM6.0.1 firmware from SamFirm using Odin
Device wont boot only see samsung logo then takes me to Android Recovery this is what i see:
Android Recovery
MMB29K.G925TUVU3ED1
samsung/zeroltetmo/zeroltetmo
6.0.1/MMB29K/G925TUVU3EPD1
user/release-keys
...
Supported API: 3
Device does not have DRK, contact to SW PL
Please flash ENG binary then install DRK
It allows me to go into download mode but every time i flash a firmware i get same DRK issue...
Download Mode shows:
ODIN MODE
PRODUCT NAME: SM-G925T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0304)
RP SWREV: B:3 K:2 S:2
already tried...
http://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306
http://forum.xda-developers.com/tmo.../g925t-4-files-firmware-6-0-1-update-t3357408
and flashing other official software using odin but no luck...
hello guys i have this problem in my gt i9190. the battery charge ran out and now I have bootloader. I could only install a ROM through odin without error but it does not give me access to the system, I can access recovery and install custom recovery. any solution
Odin mode
Product Name: gt-i9190
Current binary: samsung official
System statud: custom
Knox kerner lock: 0x0
Knox warranty void: 0x1
Csb-config-lsb: 0x30
Bootloader ap swrev: 2
Write protection: enable
A$ApFlako said:
hello guys i have this problem in my gt i9190. the battery charge ran out and now I have bootloader. I could only install a ROM through odin without error but it does not give me access to the system, I can access recovery and install custom recovery. any solution
Odin mode
Product Name: gt-i9190
Current binary: samsung official
System statud: custom
Knox kerner lock: 0x0
Knox warranty void: 0x1
Csb-config-lsb: 0x30
Bootloader ap swrev: 2
Write protection: enable
Click to expand...
Click to collapse
Install TWRP recovery through Odin and flash any custom rom
Here is the latest one for I9190
https://dl.twrp.me/serrano3gxx/twrp-3.3.1-0-serrano3gxx.img.tar
Arslan140 said:
Install TWRP recovery through Odin and flash any custom rom
Here is the latest one for I9190
https://dl.twrp.me/serrano3gxx/twrp-3.3.1-0-serrano3gxx.img.tar
Click to expand...
Click to collapse
i tried but don't work. stay in the logo of LOS