Hello Experts,
I am stuck in a peculiar situation and would very much appreciate your help.
As the title says the remote to the stick has stopped working. I have tried replacing the batteries with fresh duracells and have tried to sync the remote countless times now but to no avail.
What makes the situation peculiar is that somehow my stick is not connected to my network anymore so I cannot use the remote app on my mobile to connect to the stick.
Is there anyone who was able to make their remote work?? Any suggestions??
Related
Hi,
I updated my Fire Tav stick to 5.2.1.0. Post that I successfully rooted using the 'KingoRoot' solution. I also managed to attach a self-made OTG cable with power option as per the instructions on this forum. This allowed me to connect wireless keyboards and mouse and wireless gamepads too. I bought a new game controller which wasn't getting detected in X-input mode(Dinput mode worked).
That's when I finally decided to perform a factory reset on my device and my problems started. I used the factory reset option on the settings menu and the device booted me to the language selection screen. I am now unable to get past the language-selection.
Can someone give me some pointers to troubleshoot the issue?
Cheers,
Try downloading aftv remote from app store.
Delivered by my Silver S7.
mandroid717 said:
Try downloading aftv remote from app store.
Delivered by my Silver S7.
Click to expand...
Click to collapse
Thanks, I do have the Fire TV Remote app but it will work only if the Stick connects to the Wifi Network.
Since it's been factory reset, it doesn't connect to the network and hence AFTV Remote app will not work..
I tried searching other threads but cannot figure out if the solution is the same for my problem. I accidentally selected to forget network on my Amazon fire stick and have misplaced the remote control so now I have no idea how to connect to my wifi network using only my phone. Any ideas? I cannot find the device when I open up the app because it is currently disconnected from the wifi. Am I out of luck until I get a replacement remote?
I have a similar issue. I install Kodi and Mobdro on friends and family fire tv sticks but sometimes they do not have the remote and they are on my wifi so i cant use my fire tv remote android app without the wifi turned on. Any help would be greatly appreciated.
Hi guys
My firestick remote has randomly stopped working, I have tried many sets of new batteries with no luck and a few reset techniques with no joy.
Along with this, my firestick has somehow lost WiFi signal and now says "home is unavailable" all the time, so I have no remote and no way of adding my phone as a back up remote as the stick has no WiFi.
Any ideas? Has this happened to anyone else before?
Thanks
Sounds like you have one of the WiFi based remotes, so if the wireless on your device is not working, changing the batteries won't help.
Even if you could find one of the early Bluetooth remotes, you still would not have WiFi to connect anything else.
Hello Developers!
I got a problem and I hope some of you can help me (if not you then i don't know who). I have Fire TV stick 2 gen for about 2 years and recently my remote stopped working. I installed amazon TV app on my cellphone to get back control of the stick. Then I tried everything I was able to find on the Internet (new batteries, hold home button for 5-10-20 sec, find new BT device from the settings menu, etc.) to bring back to life original remote but there was no luck. So I decided to reset the stick back to factory settings (bad idea). As you can guess now I have the stick that is asking me to pair my (probably dead) remote with it (!).
I don't have friends with amazon TVs and I don't want to pay $20 for the new remote ( when the new stick with remote is like $30 ) I'm ok to use the app.
So I have three questions for you guys:
1) Is there any way to skip the first step (initiation of remote)? Maybe I can find some kind of firmware that I can change a little bit
(put my wifi settings and tell to skip 1st step) and flash it into my stick? IDK...
2) As I understand the original remote works on BT not on WIFI so Is there any app that uses BT and can be recognized as an amazon tv remote on that 1st step. Two apps I've tried (amazon tv app and CetusPlay) use WIFI.
3) Is there any way to check if my remote still live or completely dead? (Again I have no friends with amazon TVs)
Thanks for any input!
No ideas guys? Any?
I think you actually need a remote for first time boot :/ I don't think there is any app out there that emulates the remote, I could be wrong but have you tried this?
https://www.youtube.com/watch?v=amjs5hGXqbs
I have exactly the same issue. I don't know if my remote is working or not.
I managed to connect a usb keyboard and stupidly reset the thing to defaults - disabling developer mode in the process.
Now I have a firestick that keeps asking me to "pair the remote..."
Is there any way to enable adb ?
in this thread.. ( https://forum.xda-developers.com/fire-tv/development/unlock-fire-tv-stick-2nd-gen-tank-t3907002 ) I remember reading about shorting a pin inside the unit to ground, would this allow adb access?
tbird635 said:
I have exactly the same issue. I don't know if my remote is working or not.
I managed to connect a usb keyboard and stupidly reset the thing to defaults - disabling developer mode in the process.
Now I have a firestick that keeps asking me to "pair the remote..."
Is there any way to enable adb ?
in this thread.. ( https://forum.xda-developers.com/fire-tv/development/unlock-fire-tv-stick-2nd-gen-tank-t3907002 ) I remember reading about shorting a pin inside the unit to ground, would this allow adb access?
Click to expand...
Click to collapse
I want to say I'm fairly certain I was able to skip the pairing with a USB keyboard. Although I don't remember what key I pressed.
My remote stopped too. I stretched out the springs and reinstalled the batteries. Works great now.
Did you have any luck solving this Bartyman?
with a usb keyboard i was able to use play button to bypass
I reset my device using TWRP, and cannot get pass the "pair remote" screen! Help!? Would buying a otg cable and using a usb keyboard help? or is that a waste of money?
KINDLE FIRE MURDERER said:
I reset my device using TWRP, and cannot get pass the "pair remote" screen! Help!? Would buying a otg cable and using a usb keyboard help? or is that a waste of money?
Click to expand...
Click to collapse
buying a OTG is very useful, almost any keyboard/mouse will work. makes TWRP easier also. holding down the home button for about 10 seconds has worked for me when trying to pair the remote. I dont know if you can do anything to get by it with CEC using the TV remote.
Hi everyone
This is NOT the normal posting about pairing a remote to the Amazon Fire Stick. I have a Firestick and at the sign in page (where you connect your user account to Amazon) it is completely stuck. The remote does nothing.
Note:
The remote works fine on another Firestick
The batteries have been replaced and are OK
The usual tips for pairing the remote to the Firestick have all failed.
No matter what I do the remote will note pair (the remote is fine). I cannot get past the sign-in screen.
Does anyone know a way to reset the Firestick?
Has the Firestick gone completely?
Will ADB Link or other such device reset it?
Does anyone have any ideas please?
Thank you
3 options I can think of.
1) Use an OTG adapter and plug in a keyboard. Finishing signing in then navigate to the settings and pair the remote in the settings.
2) Same as the above except use the fire tv remote app on your phone.
4) Root the stick (if possible on your version) factory reset/wipe in TWRP. If that doesn't fully reset the device you can flash the stock firmware and it will restore it to the same state as it was out of the box, meaning the first screen will be on remote pairing.
I suspect what happens is the stick was deregistered. That usually brings up the sign-in page, and somewhere either the pairing was lost or that isn't the remote that was paired with that stick when it was deregistered.
Dear Sir
Thank you for your excellent, extensive response. However, I am unsure what TWRP is?
Thank you
I would highly suggest trying option 1 or 2 first. Option 3 requires rooting the stick and you should have a good understanding of what TWRP is before going down that path. Also you may or may not even be able to root it, depending on which you have and the software version it's on.
Hello it would have to be option 3. I tried the fire TV app and it would not install on either my phone or fire tablet. The only thing I cannot understand using TWRP is the tutorials I have seen say the Android device needs to have ADB Debugging ON.
Hardly a chance of doing it as I cannot access the device in the first place!!!
I will have a go and see what comes up.
Cheers
Using TWRP requires unlocking the device, and unlocking the device requires an older firmware that is vulnerable to an exploit. I don't know which Stick you have or your firmware version, but if the Stick has received an update since March, then there is no way to unlock it currently.
If you had TWRP, you wouldn't need to enable ADB debugging in FireOS, because TWRP includes it's own ADB binary that it enables.
Have you already tried the FireTV app on a phone/tablet? When you choose setup a new device, I thought the phone communicated with the Stick via Bluetooth?
Hello Finnzz!
thank you for the input.
I did try and install FireTV on my kindle tablet but it won't install for some reason.
I am not aware of the phone or device connecting via bluetooth (I thought it was only the remote that came with it that did that) but if it does connect with bluetooth I cannot get into the Firestick to actually connect to wi-fi or to turn on bluetooth devices! So, I am stuck!
Just to clarify, I'm talking about the FireTV app for Android.
Amazon Fire TV - Apps on Google Play
Simple navigation, a keyboard, plus voice search for Fire TV.
play.google.com
When using that app on your phone, and selecting:
'set up new device'
Then:
'Fire TV'
This will search for FireTVs via Bluetooth. Bluetooth is turned on by default on the FireTV. The stock FireTV remote connects to the Stick using Bluetooth, so it has to be on.
If you are using a FireHD tablet download the FireTV app from the Amazon app store, don't sideload the Google Play Store version.
Amazon Fire TV:Amazon.com:Appstore for Android
Edit: Also, have you already tried resetting the remote?
Reset Your Fire TV Remote - Amazon Customer Service
If your remote isn't working, try resetting it.
www.amazon.com
Hello
Thank you for the reply. Just to make sure does the Firstick need to be connected to wi-fi in order for bluetooth to work because if that is the case I cannot turn on wi-fi.
Thank you
Aussie Shiraz said:
Just to make sure does the Firstick need to be connected to wi-fi in order for bluetooth to work because if that is the case I cannot turn on wi-fi
Click to expand...
Click to collapse
Have you already tried the remote reset procedure linked to above? This is the first thing you should try. Simply taking out or replacing the batteries does not reset it.
Did you already try using the FireTV app on another Android device? I wouldn't think that if the app is communicating via Bluetooth for setup that WiFi was needed. Try it and see
Bullseye!!!
Nailed it finally and the recommendation you put forward (Fire TV app) worked a treat. It amazed me how fast and responsive it was.
Without your assistance I thought the Firestick was ready for the bin.
I am very appreciative to the following contributors:
bnevets27Finnzz
Cheers!
Glad you got it sorted. Sorry for my misinformation, I wasn't aware the app commuted with the stick over Bluetooth.