Related
I tried to upgrade my rom but the process crashed. The utility mtty doesn't work because when I connect the universal, boatloader mode by the cable, to the pc, it says "USB not recognized" (sometimes when I connect the computer is frozen till I disconnect the cable of the universal)
Please, I tried to have some solutions in the forum but all the posts indicates is needed previously the usb connection.
Do you know if should be possible to run the flash of the rom in other way, for example using a serial cable connected into the miniusb of the universal, because the boatloader screen says "Serie, v.1.01"
I apprecite what you can say please, I'm really in a hole.
Try this...
Try taking out the battery for a few minutes (10-30mins) and reboot your PC then repeat upgrade process. Hope that helps. Good luck!!!
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
Click to expand...
Click to collapse
In my case it still happening in other computers. Conclussion: some piece of the software in the universal has been lost. The screen shows "Serial" that means on some way that is opened to comunication but not USB.
My questions are:
- should be possible to put some starting software in SD and do the universal boot on it.
- do you know how to connect to the computer COM! port from the usb miniport of the Universal.
I appreciate, I was not planning to replace now the Universal...
beginner said:
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
Now works.... I still thinking windows is so stupid software made for distroy our mind ....
Solved after install drivers for a converter usb -rs232 ( I was looking for the way to connect from rs232 the universal)
I'm happy again and I promise don't try to change rom again (at least for a while)
If some person is interested in what brand of software/hardware I installed, send me a mail...
Thanks hearing me ...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
zedino said:
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
Click to expand...
Click to collapse
I want to say that is running after doing some things and obviously some of it solved my problems. I made:
- unistall last version of activesync and go back to version 4.0
- delete all the applications using ports usb.
due the connection still not running (windows message: device not recognized) and because in the screen of universal I saw: "COMM1" I tried to connect from computer port rs232. By that I purchased some special cable, name: hama brand, rs232 serial, 9 pin - usb.
As you can imagine all the steps I followed were followed by the typical restart of windows. In this sense is important to say that the universal, after connect, need to do a soft reset each time (again windows....)
Other comment is that I unmark the option to connect by usb in activesync and mark the connection by com1.
and after all was done, connecting by usb the unniversal, kill wcescomm, windows said "NEw usb device, sync device". I started mtty and now appears the USB option, great! same time the screen in universal changed from comm1 to usb, more great....
and that's all.
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
zedino said:
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
Click to expand...
Click to collapse
I think my english wording was not fine. I mean I solved my problem after install the sofware -drivers- of the rs232 connector, but connecting to the universal by usb as on standard way I was syncronizing previous the crack with activesync.
OK, where to get this driver?
thanx
?????????? NOTHING ?????????????
zedino said:
OK, where to get this driver?
thanx
Click to expand...
Click to collapse
Try here.
http://www.hama.de/portal/type*3/action*1026/searchMode*1/q*039703
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
shrubbery said:
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
Click to expand...
Click to collapse
not works, probably is this device lost forever, i have restarted device and PC almost hundred times, still the same result, uni stuck in Bootloader screen top of page "Serial" bottom of page "v1.00"
nothing changed, even if i connect to USB port
if someone have some solution to this s*it pls let me know
thanx
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
no, my problem persist, hundred times i tried to recover friends device using upgrade by original shipped ROM but the device is not recognized by system so there is allways connection error, so this kind of reliving this UNI is not usable
anyway, thanx for raply and suggestion
ZeD
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
If you're stuck in bootloader mode only, visit www.buzzdev.netand look for ExitBootloader utility written by the great Buzz. Just follow his instructions or scroll thru' Universal's forum here and there for problems relating to "stuck in bootloader"
hope this helps
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
i had the same problem with the QTEK of my principal after I upgraded his ROMs.
(after the hard reset, the pocket remained in bootloader mode).
you can solve this problem in a very simple way:
you have to launch the bootloader installation (BL1.01_RUU_UNI_V.1.2.EXE) from the PC (still connected with the PPC through USB) while the PPC is in bootloader mode (on your display you see "USB > Serial 1.01" or something like that).
then you do a SOFT reset and the pocket boot normally.
very simple.
i hope to be helpful to someone.
zedino said:
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
Click to expand...
Click to collapse
I had some problem. After uninstall all usb applications in the pc and install the software for cable usb -rs 232, doing some softreset in the pda connected, it turned the screen message "Com" by "Usb"
Hi, my univversal is dead in bootloader at serial mode and when I connect it to my PC with usb cable it recognize it as an Unknown devices and my phone still stand in serial mode!
I was trried all the method I found like:
I went to device manager of my PC an re-install my usb--didnt work
shut down usb and active synch (with task manager) and ry mtty program-- dident work
I change my usb cable and change te mini usb gate of my phone!-- didnt work
Plz help me!!!!!!!!
god_love_power said:
Hi, my univversal is dead in bootloader at serial mode and when I connect it to my PC with usb cable it recognize it as an Unknown devices and my phone still stand in serial mode!
I was trried all the method I found like:
I went to device manager of my PC an re-install my usb--didnt work
shut down usb and active synch (with task manager) and ry mtty program-- dident work
I change my usb cable and change te mini usb gate of my phone!-- didnt work
Plz help me!!!!!!!!
Click to expand...
Click to collapse
Hi welcome to the forum.... try following
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
(try method 2)
and try to change the computer usb ports...try different usb ports of the computer and try flashing to tomals 8.5 or 8.7 ...
Cheers
Rajiv
Thank you rajivshahi for your answer and attention.
I had try all the methods that I find in hole of internet!!
also I tried your suggstted method. I was connect my phone with ans without SIM and memory to each USB port of my (and another) PCs, I changed my USB cable for several times, I also tried Uni_bootloader program and MTTY but they didn't work (because there is no USB connetion with my UNI and my PC)
I just keep crying!!!!!!
Have you tested doing Doc format?
Hope it helps,
If the device is not recognised by PC at the same time as Serial not changing to USB, I would think your USB port is no longer attached as it should and can cause the problem you described. From time to time USB port might still feel and look secure on mainboard, it will even charge the device, however, when it comes to AS and USB connection to PC, it will not connect properly.
That, or your PC USB or motherboard are malfunctioning. Try other USB devices in the same ports.
My PC's USB ports are work properly because as you told enigma1nz, I had test them with another devices
For the DOC format method: there is no USB port for connecting with MTTY!
Soooooo amazing!
(thanks for all your answers)
So, it means there is no way for me
hey,
have you disabled (unckeck) USB connection for ActiveSync/WMDC at PC?
do it now or USB port will not be available for mtty.
also please make sure that you installed XP sync driver under vista incase you're trying from vista.
follow the same -
1. unckeck USB connection for as/wmdc at pc
2. reset the device by pressing reset button
3. set bl mode (if not there already)
4. connect usb cable
5. start mtty ...
Hi Tomal, first I have to say: Thank you for your amazing roms. they are so fast, nice and stable. I'm one of the biiiig fan of your roms.
seconed: yes I was disabled the USB connection and also kill ir from task manager. but my Uni is still deeaaaaaaad
somehow I have a feeling that something is wrong with the usb port in device. may be connection is broken or something...
Hi everyone,
finally I had to send my Universal to doctor! , he says that I can load your device from SD card, and boot up it, (flashing card)
!!
I was wondered! what is flashing card! (load from SD card without any PC!)
Do any one have some information about this method!!!!
enigma1nz said:
If the device is not recognised by PC at the same time as Serial not changing to USB, I would think your USB port is no longer attached as it should and can cause the problem you described.
Click to expand...
Click to collapse
tomal said:
somehow I have a feeling that something is wrong with the usb port in device. may be connection is broken or something...
Click to expand...
Click to collapse
Yep, it does look like your device's USB being a culprit.
god_love_power said:
Hi everyone,
finally I had to send my Universal to doctor! , he says that I can load your device from SD card, and boot up it, (flashing card)
!!
I was wondered! what is flashing card! (load from SD card without any PC!)
Do any one have some information about this method!!!!
Click to expand...
Click to collapse
I believe this is the thread you are looking for
http://forum.xda-developers.com/showthread.php?t=393370
Thanks a lot enigma1nz, i think that i need but can you (or any one) explane it, step by setp for me PLEASEE !:
1. Download the tool and unrar somewhere in your pc.
2. Decode the rom image (nk.nbf) using HTC64 tool and put it (nk.nba) under the "SD_Flash" directory.
3. Run the "SDFlash_G3.cmd" and follow instruction on the screen.
SD_Flash?????
Decode the rom image (nk.nbf)???????!!
this method is for 3G, my device is 4G
This is the solution
god_love_power said:
this method is for 3G, my device is 4G
Click to expand...
Click to collapse
my dear frnd few days back i was also suffered from that problem...
And problem was with mini usb in universal.
it was disconnected with there tracks from inside.
So just open ur g4 device and resold mini usb.
trust me this is the problem.
Thanks yuvraj, how can I do it? Is there any manual for it?
can you help
You can find the manual in the Wiki, just do a search
I could'nt creat golden disk (flash from sd) cos that is for G3 devices, I just think that can we install another OS like linux on SD that is boot himself up?!
or i just have to change my universal mainboard!!!!?
Finally I beleve that my Uni is dead and I have to say goodbye to it
I'm going to buy HTC Advantage X7510, but there is one question:
Can I upgrade its WM 6.1 to 6.5 ?
Hi every one, I am trying to connect one USB Wifi adapter to my Xperia S since the internal WiFi of the phone is not working. I bught a nano usb wifi adaptor whcih has a support of Android USB.
Now when i try to connect the device using an OTG cable, i get the Power consumption error. I tried to change the value of bConfigurationValue but could not do so. "File Cannot be saved" is what i get when i try saving the file with value "1". Below is the link for solution of power consumption error.
http://forum.xda-developers.com/showthread.php?t=2586313
Can anyone please help me with this thing. If there is any app or any other method to avoid this error and get the device to working. I know that Powered USB hub can do the work but i need better solution.
Thanks.
try connectig it via a USB HUB....easiest solution....hope this helps..
mohit378 said:
try connectig it via a USB HUB....easiest solution....hope this helps..
Click to expand...
Click to collapse
Tried. Didn't work. Any other solution ??
imran_a1 said:
Tried. Didn't work. Any other solution ??
Click to expand...
Click to collapse
are u still getting Power consumption error???
mohit378 said:
are u still getting Power consumption error???
Click to expand...
Click to collapse
Yes.
I'm on 4.1.2 JB. Rooted. Locked Bootloader. If that helps.
imran_a1 said:
Yes.
I'm on 4.1.2 JB. Rooted. Locked Bootloader. If that helps.
Click to expand...
Click to collapse
try connecting any pen drive or usb hard disk or xbox wired remote to ur fon via usb hub and otg cable.....then tell me if there is still power consumption error.......
first connect usb otg to ur fon....then usb hub to female port of ur usb otg....then u can connect anything to usb hub it will get automatically detected in ur fonn without power consumption error........
mohit378 said:
try connecting any pen drive or usb hard disk or xbox wired remote to ur fon via usb hub and otg cable.....then tell me if there is still power consumption error.......
first connect usb otg to ur fon....then usb hub to female port of ur usb otg....then u can connect anything to usb hub it will get automatically detected in ur fonn without power consumption error........
Click to expand...
Click to collapse
I tried USB Hub. But the device does not get detected. Not even power consumption error appears. when connecting PD directly with OTG. Works perfectly. But with WiFi adapter i get the error.
Can you provide me link with any Custom ROM which has fix for broken WiFi module AND camera problem. My phone has a lot of issues.
WiFi not working
"Camera not available" error
Accelerometer not working
And phone restarts sometimes.
If you got any info with this then please provide a link.
Thanks
just flash .96 stock ftf firmware file through flashtool for these errors.....for custom rom u can try this....http://forum.xda-developers.com/showthread.php?t=2476341.... hope this helps....
Hello,my tab sm t705 not detecting usb otg cable,and usb drive when connecting to pc,its only showing charging but no prompt for mtp like it usually did,how to solved?
this happen after my otg drive often auto connect/disconnect a few times, thinking the cable broken,already buy a new one but still not detect.
My usb debugging is already tick,mtp+adb is already tick.
Tried factory reset but still not detect.
Already try googling but no result
Is this software or hardware problem?
BTw im using iron man rom & kernel.
cinmil said:
Hello,my tab sm t705 not detecting usb otg cable,and usb drive when connecting to pc,its only showing charging but no prompt for mtp like it usually did,how to solved?
this happen after my otg drive often auto connect/disconnect a few times, thinking the cable broken,already buy a new one but still not detect.
My usb debugging is already tick,mtp+adb is already tick.
Tried factory reset but still not detect.
Already try googling but no result
Is this software or hardware problem?
BTw im using iron man rom & kernel.
Click to expand...
Click to collapse
Check your win drivers in device manager. Ensure the Mtp driver is active.
Already check.not pc problem.and already installed samsung usb driver
cinmil said:
Already check.not pc problem.and already installed samsung usb driver
Click to expand...
Click to collapse
Fair do's but does it detect the device in device manager as an MTP device when connected?
Nothing detected on my pc except for mouse usb.no connection sound,nothing happen when the usb plug in,except my phone showing charging
cinmil said:
Nothing detected on my pc except for mouse usb.no connection sound,nothing happen when the usb plug in,except my phone showing charging
Click to expand...
Click to collapse
Have you tried just a normal USB cable to see if mtp works?
What u mean by that ?sorry a little noob about this.
But i have try connecting other phone.and its work perfectly fine.its detect as portable media..dont know what the problem with my tab.also i have try ant+ tester app.and its showing ant support built in firmware no service?is it normal?can anyone who have t705 try it?
cinmil said:
What u mean by that ?sorry a little noob about this.
But i have try connecting other phone.and its work perfectly fine.its detect as portable media..dont know what the problem with my tab.also i have try ant+ tester app.and its showing ant support built in firmware no service?is it normal?can anyone who have t705 try it?
Click to expand...
Click to collapse
For MTP you just need a normal USB cable not OTG.
This is result when using ant tester
ashyx said:
For MTP you just need a normal USB cable not OTG.
Click to expand...
Click to collapse
Ok understand wht u mean now,already done doing that.that wht i want to tell,showing nothing detect on my laptop eventough usb cable is already plug in.already check on device manager>root hub properties.and check what usb is connecting and only show the mouse usb.phone cable not detect on any usb root hub.
Solved
After a few days thinking of solution then i try to go download mode and plug the usb cable to pc and voila.usb updte installer pop up means its detecting now.and i cncel the updte and go to normal mode and its also detecting.mayb some software failure that its happen.btw i just uninstalled and installed new driver and let it updte after it detect the usb.problem solved.nearly changing new micro usb port?
cinmil said:
After a few days thinking of solution then i try to go download mode and plug the usb cable to pc and voila.usb updte installer pop up means its detecting now.and i cncel the updte and go to normal mode and its also detecting.mayb some software failure that its happen.btw i just uninstalled and installed new driver and let it updte after it detect the usb.problem solved.nearly changing new micro usb port?
Click to expand...
Click to collapse
Bro can you explain how did you solve the issue
sai143420 said:
Bro can you explain how did you solve the issue
Click to expand...
Click to collapse
Sorry bro.this post been too long.but from i remmember i donwload some app for pc.and enter my phone to download mode.maybe the app is official for samsung download mode.
What do you mean by download mode
---------- Post added at 03:18 AM ---------- Previous post was at 03:18 AM ----------
cinmil said:
Sorry bro.this post been too long.but from i remmember i donwload some app for pc.and enter my phone to download mode.maybe the app is official for samsung download mode.
Click to expand...
Click to collapse
What's that app name
My first Poco F3 is completely unlocked and running a custom rom, still able to connect to PC even now.
I have a second Poco F3 that I was able to originally connect to my PC to debloat, hadn't needed to connect it to a PC till now. Today was the day I could unlock it but when I connect it via USB cable, original or otherwise, no usb options appear on phone and nothing shows on PC. I can use the same cable on my first Poco F3 and everything works fine. I've tried multiple cables, reinstalling drivers, restarting phone and PC, trying a different PC, enabling debugging tools, etc.
Nothing shows in "My Computer"
Nothing shows in Device Manager
No usb options on phone (default is set to File Transfer)
Nothing shows in CMD with "adb devices"
Charging still works
Is there anything I can do to at the very least unlock the bootloader? Or is this not fixable?
long shot... check the usb C port for dirt/dust/fluff blocking connection...
Most probably u debloated an app responsable for media transfer. If u can, revert what u debloated.
Alin45 said:
Most probably u debloated an app responsable for media transfer. If u can, revert what u debloated.
Click to expand...
Click to collapse
Did a factory reset thinking that may have been the case, still no good.
Tried cleaning out the port and still no good either
I still think it's Windows. Please can you try putting Ubuntu (or another Linux distro) on a USB, booting from that, installing platform tools (ADB/fastboot etc) and then running ADB devices. Windows is very finiky sometimes.
Edit: when you plug in your phone to the PC do you get a notification saying charging? Or is there no notification? Also does it start charging the phone?
There is a delay before it begins charging and the charging animation plays but yes it does. But then there is no usb notification. Will try ubuntu and report back
Booting into Ubuntu, before installing platform tools the first phone that I knew worked showed up and showed up in adb devices when platform tools was used. The second still didn't show up, exactly the same as on windows
Try downloading the installed stock miui rom from the update menu in the miui update menu and re-install it on the phone
Unfortunately reinstalling latest package didn't help
Can't think of anything else to suggest. Sorry
If the usb connection continues to be nonexistent, is there any way to at least unlock the bootloader without using the Xiaomi Unlock tool on the PC?
Are you sure the USB cable you're using support transfert file?
Cjayy said:
If the usb connection continues to be nonexistent, is there any way to at least unlock the bootloader without using the Xiaomi Unlock tool on the PC?
Click to expand...
Click to collapse
Nope
Hmmmmm.....strange! I'm running out of ideas....try different USB ports on PC. Maybe it's a faulty USB-C port on phone after all.
do you have a type c usb-otg?
If yes then see if it is detected by the phone
X0PIRAT3 said:
Are you sure the USB cable you're using support transfert file?
Click to expand...
Click to collapse
Yes. Used 4 different cables, 1 of which is the cable that comes with the phone. None work on this phone but do on the first phone.
Alin45 said:
Hmmmmm.....strange! I'm running out of ideas....try different USB ports on PC. Maybe it's a faulty USB-C port on phone after all.
Click to expand...
Click to collapse
Tried different ports across 2 PCs. I'm starting to think it is a faulty port, though it worked fine a week ago.
arifqur said:
do you have a type c usb-otg?
If yes then see if it is detected by the phone
Click to expand...
Click to collapse
I honestly don't know if any of my cables are usb-otg, how would I check?
Try to use this version of Mi FLash Tool (only for drivers) : https://xiaomiflashtool.com/download/xiaomi-flash-tool-20210226
Extract and launch the executable then drivers install
Something like this. You can plug in any usb stick and see if it is detected. Another way to check whether the port on the phone is working for data as well
X0PIRAT3 said:
Try to use this version of Mi FLash Tool (only for drivers) : https://xiaomiflashtool.com/download/xiaomi-flash-tool-20210226
Extract and launch the executable then drivers install
Click to expand...
Click to collapse
Tried this and still no good.
arifqur said:
Something like this. You can plug in any usb stick and see if it is detected. Another way to check whether the port on the phone is working for data as well
Click to expand...
Click to collapse
I don't have anything like this but that reminded me of the usb-c to headphone adapter and that also doesn't work. Sound just plays out of the speakers.
Trying with Android Auto in the car, the car doesn't register a device connecting at all either.
Either the data transfer portion is somehow disabled on the device itself (which I would love to know how to enable it again if that's the case) or it's a damaged usb port. Just strange that it worked a week ago.
Something I forgot to mention, when I went to unlock the bootloader yesterday the phone did not show up anywhere except for in the ADBFastbootTools to debloat the software as a OnePlus device but then never showed up again.
Cjayy said:
Tried this and still no good.
I don't have anything like this but that reminded me of the usb-c to headphone adapter and that also doesn't work. Sound just plays out of the speakers.
Trying with Android Auto in the car, the car doesn't register a device connecting at all either.
Either the data transfer portion is somehow disabled on the device itself (which I would love to know how to enable it again if that's the case) or it's a damaged usb port. Just strange that it worked a week ago.
Something I forgot to mention, when I went to unlock the bootloader yesterday the phone did not show up anywhere except for in the ADBFastbootTools to debloat the software as a OnePlus device but then never showed up again.
Click to expand...
Click to collapse
I have the same problem, did you solve it ? I replaced the usb board of the phone, still not working.