Hello,my tab sm t705 not detecting usb otg cable,and usb drive when connecting to pc,its only showing charging but no prompt for mtp like it usually did,how to solved?
this happen after my otg drive often auto connect/disconnect a few times, thinking the cable broken,already buy a new one but still not detect.
My usb debugging is already tick,mtp+adb is already tick.
Tried factory reset but still not detect.
Already try googling but no result
Is this software or hardware problem?
BTw im using iron man rom & kernel.
cinmil said:
Hello,my tab sm t705 not detecting usb otg cable,and usb drive when connecting to pc,its only showing charging but no prompt for mtp like it usually did,how to solved?
this happen after my otg drive often auto connect/disconnect a few times, thinking the cable broken,already buy a new one but still not detect.
My usb debugging is already tick,mtp+adb is already tick.
Tried factory reset but still not detect.
Already try googling but no result
Is this software or hardware problem?
BTw im using iron man rom & kernel.
Click to expand...
Click to collapse
Check your win drivers in device manager. Ensure the Mtp driver is active.
Already check.not pc problem.and already installed samsung usb driver
cinmil said:
Already check.not pc problem.and already installed samsung usb driver
Click to expand...
Click to collapse
Fair do's but does it detect the device in device manager as an MTP device when connected?
Nothing detected on my pc except for mouse usb.no connection sound,nothing happen when the usb plug in,except my phone showing charging
cinmil said:
Nothing detected on my pc except for mouse usb.no connection sound,nothing happen when the usb plug in,except my phone showing charging
Click to expand...
Click to collapse
Have you tried just a normal USB cable to see if mtp works?
What u mean by that ?sorry a little noob about this.
But i have try connecting other phone.and its work perfectly fine.its detect as portable media..dont know what the problem with my tab.also i have try ant+ tester app.and its showing ant support built in firmware no service?is it normal?can anyone who have t705 try it?
cinmil said:
What u mean by that ?sorry a little noob about this.
But i have try connecting other phone.and its work perfectly fine.its detect as portable media..dont know what the problem with my tab.also i have try ant+ tester app.and its showing ant support built in firmware no service?is it normal?can anyone who have t705 try it?
Click to expand...
Click to collapse
For MTP you just need a normal USB cable not OTG.
This is result when using ant tester
ashyx said:
For MTP you just need a normal USB cable not OTG.
Click to expand...
Click to collapse
Ok understand wht u mean now,already done doing that.that wht i want to tell,showing nothing detect on my laptop eventough usb cable is already plug in.already check on device manager>root hub properties.and check what usb is connecting and only show the mouse usb.phone cable not detect on any usb root hub.
Solved
After a few days thinking of solution then i try to go download mode and plug the usb cable to pc and voila.usb updte installer pop up means its detecting now.and i cncel the updte and go to normal mode and its also detecting.mayb some software failure that its happen.btw i just uninstalled and installed new driver and let it updte after it detect the usb.problem solved.nearly changing new micro usb port?
cinmil said:
After a few days thinking of solution then i try to go download mode and plug the usb cable to pc and voila.usb updte installer pop up means its detecting now.and i cncel the updte and go to normal mode and its also detecting.mayb some software failure that its happen.btw i just uninstalled and installed new driver and let it updte after it detect the usb.problem solved.nearly changing new micro usb port?
Click to expand...
Click to collapse
Bro can you explain how did you solve the issue
sai143420 said:
Bro can you explain how did you solve the issue
Click to expand...
Click to collapse
Sorry bro.this post been too long.but from i remmember i donwload some app for pc.and enter my phone to download mode.maybe the app is official for samsung download mode.
What do you mean by download mode
---------- Post added at 03:18 AM ---------- Previous post was at 03:18 AM ----------
cinmil said:
Sorry bro.this post been too long.but from i remmember i donwload some app for pc.and enter my phone to download mode.maybe the app is official for samsung download mode.
Click to expand...
Click to collapse
What's that app name
Related
Hello,
I've a big issue, if I try to connect the phone, via usb, to the pc windows none of the devices recognize the connection.
Nothing appear on the Defy. On the Pc, sometimes appear the "new device windows" but if I try to install drivers it show me an alert saying that the device is not installed correctly.
I've tried all the motorola drivers available but nothing happen. I've also tried 2 other pc and 2 other usb cable
Fortunally, the device is rooted and I can install a nandroid backup but I don't know how I can resolve this issue, someone can help me?
Thanks
nickee said:
Hello,
I've a big issue, if I try to connect the phone, via usb, to the pc windows none of the devices recognize the connection.
Nothing appear on the Defy. On the Pc, sometimes appear the "new device windows" but if I try to install drivers it show me an alert saying that the device is not installed correctly.
I've tried all the motorola drivers available but nothing happen. I've also tried 2 other pc and 2 other usb cable
Fortunally, the device is rooted and I can install a nandroid backup but I don't know how I can resolve this issue, someone can help me?
Thanks
Click to expand...
Click to collapse
Enable / disable USB debugging maybe? But normally there should be a prompt on the phone when you plug it in (pulling down the status bar usually asks you what to do, give memory card access, charge only...). Btw, does the Defy charge when plugged in or does the LED light up?
Arjoma said:
Enable / disable USB debugging maybe? But normally there should be a prompt on the phone when you plug it in (pulling down the status bar usually asks you what to do, give memory card access, charge only...). Btw, does the Defy charge when plugged in or does the LED light up?
Click to expand...
Click to collapse
Tried but nothing change. The phone doesn't charge correctly and no prompt message if I connect it to the pc.
And it is definitely not the cable and / or the USB port? Then it has to be a hardware problem on the phone's side I think.
Arjoma said:
And it is definitely not the cable and / or the USB port? Then it has to be a hardware problem on the phone's side I think.
Click to expand...
Click to collapse
Not the cable and not the USB
There's a way to reinstall all the Defy driver without the cable?
Try installing new moto drivers.
http://forum.xda-developers.com/showthread.php?t=1100585&highlight=rsd
Installed but no improvement on the situation. I think that's an hardware problem...
nickee said:
Installed but no improvement on the situation. I think that's an hardware problem...
Click to expand...
Click to collapse
Almost seems so : But charging works?
Arjoma said:
Almost seems so : But charging works?
Click to expand...
Click to collapse
Charging didn't work if I connect the phone to the pc, it's strange because if I connect to the electrical power it works.
I also think that I've had an issue when I've installed the custom firmware
Since marshwallow update i can't connect with my lg g4 to windows pc. It's not the usb cable, or my pc, i've tryed with another phone and it works just fine. Any sugestion or should i return my phone to waranty?:crying:
AndreiMel said:
Since marshwallow update i can't connect with my lg g4 to windows pc. It's not the usb cable, or my pc, i've tryed with another phone and it works just fine. Any sugestion or should i return my phone to waranty?:crying:
Click to expand...
Click to collapse
Hello,
Since update on windows 10 and MM i've got some trouble too. You have to install lg usb driver from the lg phone and tell windows to stop auto install mtp drivers. Windows is always trying to install an old driver over the lg one and that's the problem.
You can also try to switch from regular usb to usb debigging in dev options several times.
nope, it still doesn't work. when i plug my old samsung galaxy s2 it just works like a charm. also i reinstaled usb driver with no fix. i'm not sure if it's hardware fault or software fault
AndreiMel said:
nope, it still doesn't work. when i plug my old samsung galaxy s2 it just works like a charm. also i reinstaled usb driver with no fix. i'm not sure if it's hardware fault or software fault
Click to expand...
Click to collapse
Does it charge at least ?
Zenouzenou said:
Does it charge at least ?
Click to expand...
Click to collapse
yes, the phone is charging
AndreiMel said:
yes, the phone is charging
Click to expand...
Click to collapse
Mine was the same. And when you swipe down notification for usb connexion cant you choose mtp ?
Try to uninstall the samsung USB driver or the drive which is affected yo your g4.
Zenouzenou said:
Mine was the same. And when you swipe down notification for usb connexion cant you choose mtp ?
Try to uninstall the samsung USB driver or the drive which is affected yo your g4.
Click to expand...
Click to collapse
it doesn't appear option to select MTP . also i've tryied to connect a usb flash disk and it doesn't read it via OTG cable. I think it's a hardware fault
AndreiMel said:
it doesn't appear option to select MTP . also i've tryied to connect a usb flash disk and it doesn't read it via OTG cable. I think it's a hardware fault
Click to expand...
Click to collapse
Looks like I have the same problem. Started off with Android Auto not detecting it, but it looks like the PC can't either, nor does it pick up an external USB DAC via the OTG cable :/
Did you have any success at all? Sounds like a hardware failure though :/
Sorry I just realised this thread was back in 2016 not 2017!
have same problem here, windows 10 x64, will try in other pc and see what happens.
I am on resurrection remix LP 5.5.9
When I connect my phone to pc it shows an error. I tried to clean the microUSB port but still doesn't work.
What should I do?
Below it's an image of the error
do you have Kies installed or universal usb drivers?
try different cable.
is there something on phone notification screen, like "charging, file transfer, MTP..."?
try different PC
2
yaro666 said:
do you have Kies installed or universal usb drivers?
try different cable.
is there something on phone notification screen, like "charging, file transfer, MTP..."?
try different PC
Click to expand...
Click to collapse
I have the drivers installed. No notification on phone. The OTG usb doesn't work too :crying:
bump!!
manuel1992 said:
bump!!
Click to expand...
Click to collapse
it charges ok?
see if Odin detects it in download mode
yaro666 said:
it charges ok?
see if Odin detects it in download mode
Click to expand...
Click to collapse
Yes it charges ok.
Odin doesn't detect it.
I have to say that when my battery dies it doesn't charge, I have to use another battery
Is the device in a UBS 2 port, or 3 port? Sometimes USB 3 still doesn't work for 'regular' card readers.
Have you tried to remove the driver from the device Manager and then start all over? Or update the driver?
Bright.Light said:
Is the device in a UBS 2 port, or 3 port? Sometimes USB 3 still doesn't work for 'regular' card readers.
Have you tried to remove the driver from the device Manager and then start all over? Or update the driver?
Click to expand...
Click to collapse
I used it on another computer, I don't think it's a driver problem
Hello, whenever I plug in my Nexus 5X to my computer, it says that the USB device is not working properly. When I check my installed USB drivers it shows:
USB Device Not Recognized (Device Descriptor Request Failed)
Can someone help me? I would like to do USB Debugging
rpalmon said:
Hello, whenever I plug in my Nexus 5X to my computer, it says that the USB device is not working properly. When I check my installed USB drivers it shows:
USB Device Not Recognized (Device Descriptor Request Failed)
Can someone help me? I would like to do USB Debugging
Click to expand...
Click to collapse
If you are on win10 the builtin drivers and drivers you ask win10 to download are all you need. If you are on older platform like winxp or vista, try these:
http://forum.xda-developers.com/nexus-5x/general/psa-fix-adb-doesnt-winxp-t3403955
sfhub said:
If you are on win10 the builtin drivers and drivers you ask win10 to download are all you need. If you are on older platform like winxp or vista, try these:
http://forum.xda-developers.com/nexus-5x/general/psa-fix-adb-doesnt-winxp-t3403955
Click to expand...
Click to collapse
It was working before but now it says USB Device Not Recognized (Device Descriptor Request Failed) when I check the installed USB Drivers.
rpalmon said:
It was working before but now it says USB Device Not Recognized (Device Descriptor Request Failed) when I check the installed USB Drivers.
Click to expand...
Click to collapse
Try different cable and/or different port.
rpalmon said:
It was working before but now it says USB Device Not Recognized (Device Descriptor Request Failed) when I check the installed USB Drivers.
Click to expand...
Click to collapse
Is there a driver that I could install to fix it?
rpalmon said:
Is there a driver that I could install to fix it?
Click to expand...
Click to collapse
The error you listed doesn't sound like a software problem. It sounds like there is a USB communication issue.
Even with no drivers installed, your PC should be able to get the USB device descriptor, otherwise it couldn't figure out which driver to use.
sfhub said:
The error you listed doesn't sound like a software problem. It sounds like there is a USB communication issue.
Even with no drivers installed, your PC should be able to get the USB device descriptor, otherwise it couldn't figure out which driver to use.
Click to expand...
Click to collapse
The thing is that I have other Android devices and when I plug them in USB debugging works fine. I think that it has to do with the Android N update because ever since I updated it never worked.
rpalmon said:
The thing is that I have other Android devices and when I plug them in USB debugging works fine. I think that it has to do with the Android N update because ever since I updated it never worked.
Click to expand...
Click to collapse
It's possible or it could be coincidental. My Android N update didn't affect my USB operations or USB ID at all though.
It could also be something went bad with your USB port on the phone.
See if there is any lint inside the port using bright pencil flashlight.
Also try different USB A to C cable if that is what you are using, sometimes cables go bad.
sfhub said:
It's possible or it could be coincidental. My Android N update didn't affect my USB operations or USB ID at all though.
It could also be something went bad with your USB port on the phone.
See if there is any lint inside the port using bright pencil flashlight.
Also try different USB A to C cable if that is what you are using, sometimes cables go bad.
Click to expand...
Click to collapse
what do you mean by lint?
sfhub said:
It's possible or it could be coincidental. My Android N update didn't affect my USB operations or USB ID at all though.
It could also be something went bad with your USB port on the phone.
See if there is any lint inside the port using bright pencil flashlight.
Also try different USB A to C cable if that is what you are using, sometimes cables go bad.
Click to expand...
Click to collapse
I also tried factory resetting the phone and that didn't work.
rpalmon said:
what do you mean by lint?
Click to expand...
Click to collapse
Lint/dust. Sometimes it gets into the port and interferes with the connections.
Airblow sometimes helps.
Just a shot in the dark.
Hello,
I've got a SM-T813 and I ve got a problem with my usb port. I can neither connect to my PC or my usb-Rj45 since i installed TWRP and LineageOs.
I cannot select what to do when usb connection is detected.
I don't kown what's wrong. I changed the cable, re-install TWRP but i does not work.
Odin is not detected to.
Someone to help me please?
Thank you
ETNYBzh said:
Hello,
I've got a SM-T813 and I ve got a problem with my usb port. I can neither connect to my PC or my usb-Rj45 since i installed TWRP and LineageOs.
I cannot select what to do when usb connection is detected.
I don't kown what's wrong. I changed the cable, re-install TWRP but i does not work.
Odin is not detected to.
Someone to help me please?
Thank you
Click to expand...
Click to collapse
Your problem seems simular to what I had.
If you are sure the software settings are ok and that doesnt work, remove the backcover remove the battery connector, put it back again and see if that works. Does charging work?
HANSB57 said:
Your problem seems simular to what I had.
If you are sure the software settings are ok and that doesnt work, remove the backcover remove the battery connector, put it back again and see if that works. Does charging work?
Click to expand...
Click to collapse
Thats weird my s2 tablet has USb problems to. It stopped reading OTG usb connections and the PC. However it is always able to charge. I have noticed that when it does finally read on the PC it seems like the drives dont switch right and my battery wont charge. It got to the point I dont even try to plug it into a pc or USB otg just incase it quits charging I have SD card and twrp for installs so I use that instead. Most be a problem with the usb port and drivers.
Techguy777 said:
Thats weird my s2 tablet has USb problems to. It stopped reading OTG usb connections and the PC. However it is always able to charge. I have noticed that when it does finally read on the PC it seems like the drives dont switch right and my battery wont charge. It got to the point I dont even try to plug it into a pc or USB otg just incase it quits charging I have SD card and twrp for installs so I use that instead. Most be a problem with the usb port and drivers.
Click to expand...
Click to collapse
I dont know the answer nor the solution.
What I noticed however is that I used my tablet as an monitor for an USB web cam.
The problem (charging but not being able to connect to PC) started AFTER I removed the webcam.
The app I use (USB Camera Pro) has an option "remove camera safely"
If I use that option everything works fine but if I remove the cam cable without pressing this option I cant connect to my PC anymore and have to unplug the battery.
I am having a similar issue and would be grateful for help. My Tab T815 has a clean install of the latest Android 10 Rom and Pico Gapps via TWRP 3.4. All seem to be working great apart from the USB OTG. Specifically, I am trying to connect my DJI Mini drone controller and it's not registering it plugged in. I also have Android 10 on a galaxy S5 and have no issues at all when I connect the DJI controller to the phone. I have run a diagnostic app that says OTG is compatible with the T815 so am now at a loss on what to try next. Could this be an issue with the Rom?