Hi,
This is my first post here, but I did search and couldn't find any relevant results, so here goes...
I recently installed a Zeepin DY7098 in my car. It seems to be a MTCD unit, as far as I can tell.
The details I managed to find are as follows:
Android version: 6.0.1
Baseband version: SF3GR_M-26.3_cpeg_rk_r2p_bc2_20160629_111639
Kernel version: 3.14.0+ [email protected] #15 Wed Jun 21 20:17:52 CST 2017
Version: sofia3gr_car_64_userdebug_6.0.1 MMB29M eng.hct.20170705.123915 release-keys
MCU version: MTCD_LM_V2.55_1 Jun 23 2017 13:42:21
The unit has a built in 3G modem and a SIM card slot. I've bought data for the SIM card and installed it. I can enter settings and connect to the mobile network automatically, but I have to do it every time I start the unit. Fast boot is enabled, and it has constant power, so it only takes about five seconds to boot.
What can I do to get the 3G modem to connect to the default network on startup?
Thanks in advance!
/Fredrik
Edit: No replies, but no worries! I entered tha admin settings of the unit, changed the boot logo and when it made a full reboot, somehow the connection started working as intended.
Related
My O2 IIs just started doing this today, anyone have any ideas?
If I have bluetooth on and press the power button it turns off the bluetooth connection, once I press the power button to turn the unit back on it restarts the bluetooth connection (can see icon change at bottom of screen).
I have hard-reset the device several times. I even hard reset it and stopped it running the Extended ROM apps (just in case this was cause) and it still did it.
Install BT build 3500.
It solves the issue you talked.
I did and it doesn't.
Hmm, I see the same thing... I'm new to these forums - where would one find different BT builds for download?
Which phone do you have?
Also, I found part of the problem was Zenphone v5.1. Off to drop a message about problem to author.
It's a CDMA version, marketted as a "Harrier" by my telco:
http://www.telecom.co.nz/content/0,3900,204416-201908,00.html
Relevant stuff:
Model: PH20A2
ROM Version: 1.29.00 WWE (24/09/04)
Radio Version: HA01_136
Protocol Version: AA3.3.301
Ext ROM Version: 1.29.118 WWE
BT is currently build 2300
I did manage to find a thread here that referenced a webpage with the two BT patches I was after, I'm about to head to work to give them a go... (I only have one windows machine, and it's one of my desktops at work...)
Thread: http://forum.xda-developers.com/viewtopic.php?t=15970
Page: http://www.catherall.name/downloads/
I have the same problem after installing these patches!!!! Anyone able to help? Still disconnecting bluetooth, although the light is still flashing, it seems to get to standby! Can anyone help with this?
Hi guys,
I bought a Samsung S4 Mini (GT-I9190) from a guy. Phone looked brand new, in box with unopened accessories.
However I got a lot of 492 and internal memory errors. The phone shows that I have 32GB free space, but when I connect it to my laptop it only shows 120MB. The phone also complains than it only has 120MB of free internal space available, hence the 492 errors (I think).
After trying almost everything recommended I noticed that when I connect the phone to my laptop it shows up as "serrano3g" in Windows (8.1) file manager. After searching I discovered that the phone has been rooted with "serrano3g". I followed the instructions on "lionking853 blogspot" but the problem is that Samsung Kies v3.2.(something) does not connect to the phone, so I cannot download the drivers needed to un-root the phone.
I have setup the developer option with the "debug-usb" box checked. Also, I cannot do System Updates as it complains of a network error.
Here is some info gathered from the phone:
AP:I9190XXUAMF7
CP:I9190XXUAMF7
CSC:I9190OJVAMG2
Android Version: 4.3
Kernel Version: 3.4.0-933422 [email protected] #1 Fri Jun 21 13:30:42 KST 2013
Build Number JDQ39.I9190XXUAMF7
Custom Build Version: v.s.140918
Guys I would greatly appreciate it if someone can give me some pointers ...
Thank You
Danny
Danny0 said:
Hi guys,
I bought a Samsung S4 Mini (GT-I9190) from a guy. Phone looked brand new, in box with unopened accessories.
However I got a lot of 492 and internal memory errors. The phone shows that I have 32GB free space, but when I connect it to my laptop it only shows 120MB. The phone also complains than it only has 120MB of free internal space available, hence the 492 errors (I think).
After trying almost everything recommended I noticed that when I connect the phone to my laptop it shows up as "serrano3g" in Windows (8.1) file manager. After searching I discovered that the phone has been rooted with "serrano3g". I followed the instructions on "lionking853 blogspot" but the problem is that Samsung Kies v3.2.(something) does not connect to the phone, so I cannot download the drivers needed to un-root the phone.
I have setup the developer option with the "debug-usb" box checked. Also, I cannot do System Updates as it complains of a network error.
Here is some info gathered from the phone:
AP:I9190XXUAMF7
CP:I9190XXUAMF7
CSC:I9190OJVAMG2
Android Version: 4.3
Kernel Version: 3.4.0-933422 [email protected] #1 Fri Jun 21 13:30:42 KST 2013
Build Number JDQ39.I9190XXUAMF7
Custom Build Version: v.s.140918
Guys I would greatly appreciate it if someone can give me some pointers ...
Thank You
Danny
Click to expand...
Click to collapse
Download
SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Download
Odin 3.10
http://www.sammobile.com/firmwares/download/17378/I9190XXUAMF7_I9190OJVAMG2_XSG.zip/
Install Drivers, flash rom with Odin . U maybe need to flash it more times.
Factory reset your phone from recovery mode.
U should be fine
Hello,
I have and head unit from Witson for my Ford Focus. But it's not working anymore, when I connect to power it "bips" and nothing happens on screen, I still can enter on recovery mode.
I contacted Witson, and they sent me an update package, I installed, but it's not booting on Android.
Follow the video:
MCU:
MTCB-KYD-V2.10
Android:
4.4.4_21112014
Kernel:
3.0.36+
[email protected] #193
Version:
rk3066-eng4.4.4 21112014.14:57:05
Sorry for my English, I say google translate.
I have a brand of the brand MULTI BOOSTER 4.4 BDVM-7600UNI WIFI UNI.
I made a mistake at the root, now she turns on the radio works reverse camera, everything normal. but not the image, the touch works ...
just gives a logo and turns black, the auteration was in the folder "bootanimation".
already tried everything I saw on the web to enter the recovery mode and give hard reset. but nothing works ... it does not enter.
can you help me give the hard reset or install new rum?
obs: the phone connects to bluethoot.
This is the information I have:
manufacturer: suoling
Rockchip 3066
Android Version: 4.4.2
API-Level : 19
Bootloader : fastboot
Build ID: K1102-SL South America 201505507.1846
Java Vm: Dalvik 1.6.0
Kermel Architecture: armv71
Kermel Version 3.0.36+ (20150414.1801
I have a Pumpkin KD-0234 and I've been trying to correct an odd issue for some time but I'm not really getting anywhere with Pumpkin's support. It all started in January when my google play services crashed. Did a bit of digging, found out which service it was and force stopped it. All was good until a few weeks ago when out of the blue my wifi would not connect to any network and I now have limited bluetooth connectivity. BT actually connects fine but not all functions work. For instance, when I'm playing music on my phone I can play\pause through my HU but FF and REW have no effect. My OB2 reader connects fine but torque cannot read anything from it.
All other functions are fine and I am certain it is all software related and so tried a factory restore only to find that it doesn't actually do a RESTORE (ie a full wipe and reset from scratch) but instead just wipes user settings and data. Many of the factory settings and element changes (ie LED colour setting) remained as I set them.
So, in contacting Pumpkin they did send me an update.zip file which did update my version but it still isn't a full factory reset that I'm looking for. Now...in trying to get the image.zip file they finally tell me that don't have it and can't help and they believe this is a main board problem. I'm not buying that answer and want to see what a full wipe and reinstall of the OS will do. But I can't do that without the image.zip file.
So...does anyone know where I can get the image.zip file or another way I can perform a full factory restore for my HU?
HU specs:
Pumpkin model number: KD-0234
From HU settings:
model: S07
S/N 000D18A1643B
MCU Version: MTCB-KLD2-V2.51 apr 22 2015 16:19:18
Android version: 4.4.4_16042015
Kernel Version: 3.036+
[email protected] #308
Thu Apr 16 14:59:51 CST 2015
Build number: rk3188-eng4.4.4 16042015.15.39:49
CPU: arm7 1.6ghz (x4)
Memory: 1024Mb
Thanks.