Develop Bugs

[Q] Samsung Galaxy Tab GT-P1000 - Rooting

Hi
I own a Samsung Galaxy Tab GT-P1000 - On Talk Mobile Network in UK (Vodafone).
I have Gingerbread 2.3.3 Baseband Version: P1000XXJPZ
I have tried a number of tools to unlock this device: Gingerbreak and OneClickRoot, both did not work.
Can anyone suggest a simple method for to achieve this?
I have seen a number of solutions using CF-Root v3.3 but my Baseband version never listed.
Please help
Rachel

What I Know
I used SuperOneClick v2.1.1 with mixed success
First direct connect (Not will plug into stand or keyboard stand)
Use PC that's is much bigger then my laptop which is 2ghz 2g memory
Turn off Virus Scan
for that matter turn off all programs that are running.
make sure you test you connection, and that it connects after USB Debugging is Activated.
No windows messages
Cross your fingers
If it fails to work, you to switch every thing off to rest, including the PC
and start again
Stopped at mounting a number of times.
got there in the end.

Switch Between Chinese I9100G to International I9100G

OK, my phone is not bricked, but I certainly am…
Trying to reset phone from Chinese to International using posted guide
GT-I9100G
Android 4.0.4
Baseband version I9100GZCLPJ
Kernel version: 3.0.8-1067026
Build number: IMM76D.ZCLPJ
Following the instructions kindly provided by Harchoaoui,
I downloaded the Espresso International i9100g folder and unzipped on my pc.
I then booted my phone to reset (volume up; home button; power button), and wiped “data/factory reset” and “cache partition” (these were the only options available). Removed the battery and connected i9100g with USB cable – Nothing happened!
Tried disconnecting/reconnecting i9100g multiple times – Still Nothing happened!
I repeated this process, following the Guide instructions, several times with the same sad results.
What am I doing wrong?????????????????
I am also seeking clarification of the following:
Assuming that Harchaoui, et al, can set me straight here, I’m still not clear how to manually load Drivers from my PC to the i9100g. More Help needed…
The usb_drv_windows I downloaded contains two sub-folders (amd64 and i386 both containing two drivers [WdfCoInstaller01009.dll and winsubcoinstaller2.dll]. More confusion for this Brick.
…and lastly (I hope): How do I run the omap4430hs_espresso_Inter i9100g.bat file on the phone.
I fully recognize that these are the questions of a complete Brick, but I truly need your help – I’m stuck with a Chinese i9100G that I can’t properly utilize.
PLEASE NOTE: I am posting here because I was not able to post on Q & A Forum

Hey Bro ^^ ...
** First u was able to send me a pm and not post here it's will be faster then this
*** For you to load the the usb driver it's easy just go to device manager then connect your phone you will see a new device connected but no driver intalled on it so left click on it select update driver then select manual update or( let me pick a driver from...) select the main folder usb_drv_windows not amd64 or i386 ...
NOTE you should connect your phone without battery ...
if you need more i can help you with TeamViewer ... just send a pm ^^
I hope that i help u sry if i miss something ...

can't flash back
Hello, i also can't root i9100g , whenever i try to do any official rom it say's that "RE-PARTION FAILED" I don't know why? before i was using cm10 v2.16 then i root to 2.3.6 then my i9100g get updates and i updated it fully the last update was of 10 MB which change my mobile baseband to I9100GZCLPJ and build number IMM76D.ZCLPJ. after getting this update i can't flash or root my mobile. is there any one know how can i fix this problem to root i9100g to any other official rom. i tried, 2.3.6, 4.0.3 and 4.0.4 but every time the same result,

If i connect mt gt-i9100g to pc with usb my phone connects and disconnects immediately and i would not get a chance to install the drivers!!?? I am running windows 10

Finding appropriate ROM for a generic phone

Hi,
I have been offered a generic phone in February 2014 by an office supplies retailer as part of a special offer.
The make is "SCOTT" and Settings>"About phone" gives me:
Model number: HWD-MP001
Android version: 4.2.2
Kernel version: MT6572
Custom build number: kp.HWD-MP001.v05
Recently, I have been having problems with my Samsung S4 so in order to test whether it was the phone (S4) or another factor, I wanted to start using the Scott phone.
Unfortunately, any adding of my Google account leads to two seemingly-related issues:
I get a "Google Talk authentication failure" message
I can't download anything from the PlayStore or upgrade any app because I get an "RPC:S-7:AEC-7" error.
Believe me, I have tried everything the entire Web suggests, including what the "get help troubleshooting" in the dialog that reports the "RPC:S-7:AEC-7" error says, to no avail. I've been on this for weeks now.
I had installed the Play Store APK in version 5.10.30 on the phone. But today, I noticed that the latest version on the S4 had changed to 6.0.0 so I downloaded it again from the S4 and installed it to the Scott phone. The installation failed without an error other than "App not installed", probably due to very low internal memory (15 MB...).
My question now is: how can I find an appropriate ROM for this phone? Checking for system updates is useless: either (through Software Updates) the phone does not even try to send a single packet over the Wi-Fi: it says right then "Your system is currently up to date" or (through "System updates) I get an additional "Network connection failed" message.
Thanks.

SM-P607T stuck in 4.4.2

Hello everyone,
i bought the SM-P607T during my deployment in Afghanistan over Ebay USA . Spending my time there i tested the device and installed all updates etc. Back in Germany just my wife used it. Some weeks ago i noticed that an update to Lollipop should be avaible so i took the device to bring it up to date and i noticed some problems.
(Please note that i am just a noobie to flashing and rooting android and just follow guides to get to my goal.)
1. Device only loading while shut down. (After rooting and installation of TWRP it strangely started to load while on again even on PC USB connection)
2. Its not possible to connect the device with any PC.
3. OTA updates stop at around 27% and fail (KitKat 4.4.4)
[In TWRP shown
"E: Error executing updater binary in zip /data/fota/update.zip
E: Error installing zip file /data/fota/update.zip"]
Strange enough that the update info shown in android is Chinese Version
Tried to get some support with Samsung Europe but unfortunately they say US device US problem......
So what did i do in the meantime
1. Tried different loading devices frome Samsung and 3rd party companys. No changes.
2. Tried several different data cables to connect to 4 different PC. Even the one wich worked good with my Honor7 or the Galasy S4 mini dont do with the 607
3. My last try to fix this problem was to change the USB charging dock completely. Also didn´t change anything.
4. Now the step where i am currently stuck. I managed to root the device and install TWRP(v2.8.7.0) . Now tried to install Version P607TUVUBOI2 via SD Card.
Just followed diffenrent Guides on youtube and forums but im stuck at this.
Here is the message i got in TWRP recovery:
"Installing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
Checking for MD5 file....
Skipping MD5 check : no MD5 file found
Error flashing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
updating partition details......
Checked the *.zip on my PC there was just this file in: P607TUVUBOI2_P607TTMB1BOI2_P607TUVUBOI2_HOME.tar.md5
Downloaded the file from a different source again with same result
It would be very nice if someone is capable to help me with this and give me a hint what i possibly did wrong (Please do not mention not to buy in the US). For me it doesnt matter if i got a rooted or not routed version to install my main goal is to get rid of 4.4.2 . The problem with the not working USB connection is the biggest show stopper for me.

[email protected] said:
Hello everyone,
i bought the SM-P607T during my deployment in Afghanistan over Ebay USA . Spending my time there i tested the device and installed all updates etc. Back in Germany just my wife used it. Some weeks ago i noticed that an update to Lollipop should be avaible so i took the device to bring it up to date and i noticed some problems.
(Please note that i am just a noobie to flashing and rooting android and just follow guides to get to my goal.)
1. Device only loading while shut down. (After rooting and installation of TWRP it strangely started to load while on again even on PC USB connection)
2. Its not possible to connect the device with any PC.
3. OTA updates stop at around 27% and fail (KitKat 4.4.4)
[In TWRP shown
"E: Error executing updater binary in zip /data/fota/update.zip
E: Error installing zip file /data/fota/update.zip"]
Strange enough that the update info shown in android is Chinese Version
Tried to get some support with Samsung Europe but unfortunately they say US device US problem......
So what did i do in the meantime
1. Tried different loading devices frome Samsung and 3rd party companys. No changes.
2. Tried several different data cables to connect to 4 different PC. Even the one wich worked good with my Honor7 or the Galasy S4 mini dont do with the 607
3. My last try to fix this problem was to change the USB charging dock completely. Also didn´t change anything.
4. Now the step where i am currently stuck. I managed to root the device and install TWRP(v2.8.7.0) . Now tried to install Version P607TUVUBOI2 via SD Card.
Just followed diffenrent Guides on youtube and forums but im stuck at this.
Here is the message i got in TWRP recovery:
"Installing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
Checking for MD5 file....
Skipping MD5 check : no MD5 file found
Error flashing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
updating partition details......
Checked the *.zip on my PC there was just this file in: P607TUVUBOI2_P607TTMB1BOI2_P607TUVUBOI2_HOME.tar.md5
Downloaded the file from a different source again with same result
It would be very nice if someone is capable to help me with this and give me a hint what i possibly did wrong (Please do not mention not to buy in the US). For me it doesnt matter if i got a rooted or not routed version to install my main goal is to get rid of 4.4.2 . The problem with the not working USB connection is the biggest show stopper for me.
Click to expand...
Click to collapse
I really confused about your description? you using twrp to flash a .zip rom? then you mentioned about .md5 rom on your pc? how did you flash? With .md5 rom you need to use Odin to flash. Can you boot into download mode (hold down volume down + Home buttons then press power button)? If you able to boot to download mode, your pc should able to see the device and you would use Odin to flash the .md5 rom from your pc to the device. Also where did you download the .zip rom?

Need help / advice updating from pre-release version 4.4 (watch currently unusable)

Hello all,
I'm in a bit of a pickle with my SWR50 that I got not long ago but as of now haven't been able to use.
As far as I've established it's got a pre-release software version on it, and not sure if that itself is the problem but I can't pair it successfully to anything and can't use it.
Tried to read up as much as I could on how I could sort this, but there's way too much info out there, too many methods because people mainly were in it to get more out of their gear, roms etc, and as I haven't had much previous experience with rom updates (unless there was some step by step, easy to follow stuff) I'm stuck.
The problem:
Pairing with phone –> phone finds watch, pairing starts
*just a minte* goes on for ~3 minutes than says: “can’t connect to the internet, swipe for options" (make sure phone has net, go to help website, retry, abort)
Then it just says Tetra BF1E – install android wear on your phone (on long press of power button I can access limited menu)
About phone:
Model: Tetra
Software Version: 4.4W
Build Number: Tetra-userdebug 4.4W KGW29E 1031 test-keys
If I try to update via Xperia Companion I eventually get a:
Startup error
"An error occurred while preparing to update your device. Device is unchanged. Try later or contact sony support"
UEGetPhoneMissingInfo
tetra 1291-6001
2.2.5.0 / Win8 64bit /wiin32 /US
Also tried factory restore from within the watch (both from menu and startup malarkey), but it didn't change anything regarding connectivity success.
Sorry for the lots of info, as a problem solver myself I like to get a good view into what's wrong & what's been tried.
All I want is to somehow upgrade to an OS that works - I don't have preferences other than I don't need anything flashy (5.1 would do), just something that offers decent battery life - I'd only use the watch to get notifications of messages, calls etc.
Any advice of what steps I should take so I can read up on them, would be appreciated!

Flash this via TWRP and after that try to restore watch from Xperia Companion