Develop Bugs

Marshmallow OTA link here

Here's the official OTA link to update from LCA43 (Lollipop) to MEC24H (Marshmallow). Enjoy! You can only flash this on a watch that is completely stock! If you need to restore your watch, Sony PC Companion might work.
https://android.googleapis.com/pack...e2ee74fbab.signed-tetra-MEC24H-from-LCA43.zip
Small note: This OTA will update the bootloader to block "tethered booting" in fastboot while the bootloader is locked (so you will have to unlock the bootloader to use TWRP). If you want to keep the old bootloader, there is a post on the third page. This zip is signed by Sony, so you can flash it in stock recovery with a locked bootloader.
Edit: Here are some screenshots. Not much has changed compared to Lollipop, and Sony hasn't added anything compared to other watches, so they're not very interesting. https://imgur.com/a/Vp8hY (Ambient Mode might look worse on your watch because after I flashed Marshmallow I edited build.prop to disable low bit ambient mode. If you want to do this too, I made a crappy tutorial for that on reddit: https://www.reddit.com/r/AndroidWea...an_disable_low_bit_ambient_mode_to_make_your/)

Hi,
thanks for link. Could you give here some tutorial how to install this update ?
Must have unlock bootloader for this update ?
Thanks.

kalousek said:
Could you give here some tutorial how to install this update ?
Click to expand...
Click to collapse
Open up adb on a computer and plug in the watch. Issue adb reboot recovery and tap the watch screen when the recovery droid picture shows up. Swipe down to the sideload option then swipe right. Issue adb sideload blahblah.zip (obviously put the real zip name where "blahblah" is) and wait. After it finishes, swipe to the reboot option and swipe right to select. Your watch has been updated!

andrewia said:
Here's the official OTA link to update from LCA43 (Lollipop) to MEC24H (Marshmallow). Enjoy!
https://android.googleapis.com/pack...e2ee74fbab.signed-tetra-MEC24H-from-LCA43.zip
This OTA will update the bootloader to block "tethered booting" in fastboot with a locked bootloader. Unlocking the bootloader restores functionality. You can flash this zip in stock recovery with a locked bootloader.
Edit: Here are some screenshots. Not much has changed compared to Lollipop, and Sony hasn't added anything compared to other watches, so they're not very interesting. https://imgur.com/a/Vp8hY Ambient Mode might look worse on your watch because I edited build.prop to disable low bit ambient mode. I made a crappy tutorial for that on reddit: https://www.reddit.com/r/AndroidWea...an_disable_low_bit_ambient_mode_to_make_your/
Click to expand...
Click to collapse
so you have already disabled low bit mode??? and did you reup the zip after or was that done before you uploaded it?

andrewia said:
Open up adb on a computer and plug in the watch. Issue adb reboot recovery and tap the watch screen when the recovery droid picture shows up. Swipe down to the sideload option then swipe right. Issue adb sideload blahblah.zip (obviously put the real zip name where "blahblah" is) and wait. After it finishes, swipe to the reboot option and swipe right to select. Your watch has been updated!
Click to expand...
Click to collapse
Thanks for tutorial

lohtse said:
so you have already disabled low bit mode??? and did you reup the zip after or was that done before you uploaded it?
Click to expand...
Click to collapse
The zip is the stock zip on Google's servers. My mod is separate, I just mentioned it in case anyone was wondering why my card previews looked better than theirs.

andrewia said:
The zip is the stock zip on Google's servers. My mod is separate, I just mentioned it in case anyone was wondering why my card previews looked better than theirs.
Click to expand...
Click to collapse
anychance you can provide a revised zip with the mod??

Can Someone provide boot.img from MM update?

lohtse said:
anychance you can provide a revised zip with the mod??
Click to expand...
Click to collapse
No, because the mod is literally only adding a single character (#) to a line in build.prop. If I repacked it into a zip you would still have to boot TWRP and use adb to flash it, which is 90% of the work.

I'll try to pull the boot image tomorrow.

andrewia said:
I'll try to pull the boot image tomorrow.
Click to expand...
Click to collapse
Thanks. I want look at ramdisk. And recompile kernel for MM update...

anyone finding the UI really laggy since doing this update ?

I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?

pickles76 said:
I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?
Click to expand...
Click to collapse
mine was completely stock and i just followed instructions in this post and went fine

bigr1979 said:
mine was completely stock and i just followed instructions in this post and went fine
Click to expand...
Click to collapse
Yup, I've done this many times before on other devices but this one ends up with status 7 doing exactly as explained. Tried downloading the file a few times (im on OSX/Mac btw) and still the same results. Maybe should try on a windows-machine.

pickles76 said:
I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?
Click to expand...
Click to collapse
complete stock, locked bootloader and unrooted and no issues for me..
On that note what are the best ways to Unlock bootloader(will I loose data?), Flash twrp and then root?
---------- Post added at 11:49 AM ---------- Previous post was at 11:48 AM ----------
bigr1979 said:
anyone finding the UI really laggy since doing this update ?
Click to expand...
Click to collapse
Nope I actually find it snappier.... I have 30+ apps on as well

lohtse said:
complete stock, locked bootloader and unrooted and no issues for me..
On that note what are the best ways to Unlock bootloader(will I loose data?), Flash twrp and then root?
---------- Post added at 11:49 AM ---------- Previous post was at 11:48 AM ----------
Nope I actually find it snappier.... I have 30+ apps on as well
Click to expand...
Click to collapse
I used windows 10 64bit to flash mine.... Seems to be getting a bit snappier now that its calming down and have downloaded music onto etc cheers thanks OP for the update

andrewia said:
I'll try to pull the boot image tomorrow.
Click to expand...
Click to collapse
Never mind.
I've extracted boot.img.
Try to rebuild my kernel for MM.
Sent from my HTC One_M8 using XDA-Developers mobile app

pickles76 said:
I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?
Click to expand...
Click to collapse
Hello
I have the same problem. How do you solve it?
Thanks.
OK now I flashed the stock kernel of LCA43 before flashing the full rom

mickael91210 said:
Hello
I have the same problem. How do you solve it?
Thanks.
OK now I flashed the stock kernel of LCA43 before flashing the full rom
Click to expand...
Click to collapse
Could you explain more? Im still stuck..

Untouched ZF2 Stock LP to Stock MM .184

Hi all, I finally read good news for our MM Stock: it is finally almost bug-free. I read that only the Wi-Fi bug still here, but wait like 10-20 secs of connection doesn't kill me.
So now I am fully ready to update but i don't know anything.
Here is my idea:
1) Do a full erase (Delete every folder/file).
2) Install the full FW of MM .184 downloaded from asus (I don't want a update just a clear install).
Unlucky I read that Asus Flash tool can be a bit crazy with strange errors and maybe can delete important partitions (like unkown imei, lost mac, ect..)
So, can someone please use a bit of his/her time to explain me what can i do? Like a step-to-step guide?
Thanks you very much,
LightDestory.

which firmware number you are currently on?
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
very first fully unroot your mobile. reboot into recovery and clear factory data and reset. ther clear cache partition. then apply updates from adb then. install 2.20.40.184. asuming you are on soem lp version

sukhwant717 said:
which firmware number you are currently on?
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
very first fully unroot your mobile. reboot into recovery and clear factory data and reset. ther clear cache partition. then apply updates from adb then. install 2.20.40.184. asuming you are on soem lp version
Click to expand...
Click to collapse
My phone is untouched: no root, no bt unlocked and my current version is the latest avaible of LP via OTA (so the .198).
I have only the full FW WW-4.21.40.184.zip. The 2.20.40.184 (there is a mistake because it is 2.20.40.198) is LP... but I want to install MM.
Thansk for the fast reply. But, excuse me... I need more info!
I am a bit confused between flash via zip or a raw firmware... I just need the safer way that can erase all and do a clean install..

LightDestory said:
My phone is untouched: no root, no bt unlocked and my current version is the latest avaible of LP via OTA (so the .198).
I have only the full FW WW-4.21.40.184.zip. The 2.20.40.184 (there is a mistake because it is 2.20.40.198) is LP... but I want to install MM.
Thansk for the fast reply. But, excuse me... I need more info!
I am a bit confused between flash via zip or a raw firmware... I just need the safer way that can erase all and do a clean install..
Click to expand...
Click to collapse
Use the directions here: https://www.asus.com/zentalk/ph/thread-98381-1-1.html
But use the 184 file you downloaded
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Use the directions here: https://www.asus.com/zentalk/ph/thread-98381-1-1.html
But use the 184 file you downloaded
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Hi, thanks for the reply.
This is the "update LP to MM" way... is there a way to clear everything and install?

After you do it then factory reset it.
Sent from my ASUS_Z00AD using Tapatalk

I also updated from LP .198 to MM .184 because I heard a lot of problems have been resolved and I am very happy to say that I've had no problems whatsoever. The sound and mini freeze in games problem that I had on MM .134 was solved as well. The battery life is also good. The performance is good, phone works like a charm and I didn't even do a factory reset, I only upgraded and that's it! Kudos to Asus for finally fixingthe problems!

you don't need to do anything. just go into recovery. then click factory data and reset. then clear caxhe partition. then apply update from adb. and then install MM version you downloaded from asus via sideload command.

sukhwant717 said:
you don't need to do anything. just go into recovery. then click factory data and reset. then clear caxhe partition. then apply update from adb. and then install MM version you downloaded from asus via sideload command.
Click to expand...
Click to collapse
Thanks for all the replies. I need just the last info, help me to understand.
1)Go to Recovery and do a factory reset and wipe cache partition (OK... I know how do that)
2) "Apply Update from adb" what means? Factory reset will make my phone like a older version of LP and I have to flash first the .194? or by clicling on 'apply update from adb' the phone will go in a "download mode" and so go to step 3?
3) Sideload MM (OK... i read on zentalk the sideload command)
EDIT:
I am now with STOCK 6.0.1 MM!
I got 2 bootloops but on the third flash the phone booted! WOW!
Moderator can close this.
Thanks again for the help!

Reset phone and put stock recovery

Hello, it's possible to reset the phone in stock conditions (i don't care about the boot warning alert) and put stock recovery? Thanks

is your Phone rooted?
Have you delete Apps from System,data or Product Folder?
Which Version do you have L21?

letschky said:
is your Phone rooted?
Have you delete Apps from System,data or Product Folder?
Which Version do you have L21?
Click to expand...
Click to collapse
Yes my phone is rooted and I deleted bloatware apps. I have AL10

the boot warning alert is normal,you Bootloader is unlocked.
you can restore your firmware in eRecovery,this works only with AL10 Version and is very easy.
Boot in eRecovery and Download your firmware and restore.
Reboot your Phone and when you see the Orange Font "Your device ist trustet.... press the Volume up for 3 sec. and it boot into eRecovery.
After installing the Firmware make the Phone automatic a Factory reset and you on Stockrom with root.
Another Variant is Install Huawei HiSuite and press system update,if no update is available you can go to the previous version,but you must have a installed Stockrecovery.
I have an Honor Note 8 AL10 and this works fine.
But first try the eRecovery

letschky said:
the boot warning alert is normal,you Bootloader is unlocked.
you can restore your firmware in eRecovery,this works only with AL10 Version and is very easy.
Boot in eRecovery and Download your firmware and restore.
Reboot your Phone and when you see the Orange Font "Your device ist trustet.... press the Volume up for 3 sec. and it boot into eRecovery.
After installing the Firmware make the Phone automatic a Factory reset and you on Stockrom with root.
Another Variant is Install Huawei HiSuite and press system update,if no update is available you can go to the previous version,but you must have a installed Stockrecovery.
I have an Honor Note 8 AL10 and this works fine.
But first try the eRecovery
Click to expand...
Click to collapse
Thank you very much! the first variant works even if i have twrp installed?

LorenzoAbi said:
Thank you very much! the first variant works even if i have twrp installed?
Click to expand...
Click to collapse
Yes,it will work with Twrp installed.The Procedure install your Phone completly to Stock.
---------- Post added at 02:57 AM ---------- Previous post was at 02:46 AM ----------
Can you Backup your oeminfo from AL10 and upload it before you make this Procedure please

http://www.syncios.com/android-backup/backup-and-restore-huawei-honor-7x.html

bdxoul said:
http://www.syncios.com/android-backup/backup-and-restore-huawei-honor-7x.html
Click to expand...
Click to collapse
The link is spam!!??

SVR said:
The link is spam!!??
Click to expand...
Click to collapse
Go and check then say It's spam or not

bdxoul said:
Go and check then say It's spam or not
Click to expand...
Click to collapse
It's 100% spam. Just read the specs ... Android v5.1 (Lollipop), 5.5' screen, wrong display resolution etc. . It's all rubbish.

erecpvery doesn't work on the l24 since they don't offer the firmwares yet. SUCKS!

lowspeed said:
erecpvery doesn't work on the l24 since they don't offer the firmwares yet. SUCKS!
Click to expand...
Click to collapse
eRecovery restore works only with AL10 Version

letschky said:
eRecovery restore works only with AL10 Version
Click to expand...
Click to collapse
That's really sucky.

lowspeed said:
That's really sucky.
Click to expand...
Click to collapse
Yes i know

so the L24 is sol, huh? I have twrp and would like to go back to stock recovery.

Any news on when we'll see an update via erecovery for the BND-L24??!!

JDBarlow said:
Any news on when we'll see an update via erecovery for the BND-L24??!!
Click to expand...
Click to collapse
probably not going to happen. as Hawaiaiaiai is pulling out of the US market... (So I hear, i could be wrong)

lowspeed said:
probably not going to happen. as Hawaiaiaiai is pulling out of the US market... (So I hear, i could be wrong)
Click to expand...
Click to collapse
Man I sure hope you're wrong about that
Supposedly Oreo is dropping starting tomorrow. I'm guessing that'll only be OTA.
You don't think it'll be available via erecovery

What is ERecovery?
letschky said:
Yes i know
Click to expand...
Click to collapse
Sorry for the very stupid query. What is ERecovery?
I am aware of stock , TWRP or ClockWorkMod recovery. IS this a new one?

darkkid85 said:
Sorry for the very stupid query. What is ERecovery?
I am aware of stock , TWRP or ClockWorkMod recovery. IS this a new one?
Click to expand...
Click to collapse
Erecovery is the second Recovery,you can use to Restore the System to latest Version.
---------- Post added at 09:55 AM ---------- Previous post was at 09:13 AM ----------
Power off the Phone.
Press Volume Up and hold but the USB Cable from Pc in and let go when you see the Erecovery.
There is an Option to Restore the System via Wifi to latest Stock Rom Version.
But i think this works only on Chinese Phones,i have a Honor Note 8 and it works on it.But it is not sure, maybe it works with the newer devices too

TMo V30 receiving update as of 10/30/18

System update is rolling out to T Mobile V30's ....
October security patch.

716 megs. Must be some bug fixes in there too? Baseband version and build number (obviously) are different, still 8.0.0 and 4.4.78 kernel.

redoregon said:
716 megs. Must be some bug fixes in there too? Baseband version and build number (obviously) are different, still 8.0.0 and 4.4.78 kernel.
Click to expand...
Click to collapse
It looks like there is a camera update and some AOD updates as well. I am a bit intrigued by the new AOD options.

Is it just me or the new Outfocus (portrait) mode is broken? After I take a picture it tells me that the portrait effect couldn't be applied because it couldn't find a face in the saved picture?
P.S. Also intrigued by the ned AOD options, and fade in animation.
Edit: Fixed it by clearing data and cache.

How does one apply update without loosing root/magisk

[Cruzer] said:
How does one apply update without loosing root/magisk
Click to expand...
Click to collapse
Impossible. Just reapply magisk and TWRP.

Anyone else have issues trying to update? I've tried twice on via the on phone update both times it downloaded but reboots to just error symbol and after manual reboot says verification problem. I've also tried twice via Bridge but it seems to fail in download phase.

Trickymaster said:
Impossible. Just reapply magisk and TWRP.
Click to expand...
Click to collapse
Wouldn't you have to go through the whole process of re-rooting it again?
---------- Post added at 09:39 PM ---------- Previous post was at 09:38 PM ----------
[Cruzer said:
;78017106]How does one apply update without loosing root/magisk
Click to expand...
Click to collapse
You can always wait for someone to make a flash able zip of it with stock recovery removed

KUSOsan said:
Wouldn't you have to go through the whole process of re-rooting it again?
---------- Post added at 09:39 PM ---------- Previous post was at 09:38 PM ----------
You can always wait for someone to make a flash able zip of it with stock recovery removed
Click to expand...
Click to collapse
If you have TWRP just install Magisk again and you are back to being rooted.

Trickymaster said:
If you have TWRP just install Magisk again and you are back to being rooted.
Click to expand...
Click to collapse
I thought if bootloader was unlocked then you couldn't install an OTA and have to flash it through LG bridge or whatever the program is for flashing kdz? This was last I remember but maybe I missed something.

KUSOsan said:
I thought if bootloader was unlocked then you couldn't install an OTA and have to flash it through LG bridge or whatever the program is for flashing kdz? This was last I remember but maybe I missed something.
Click to expand...
Click to collapse
Right. You can't install inferior partial image OTA, if you have TWRP.
Wait for the superior full image KDZ. Flash through LGUP, DL PARTITION, but UNcheck recovery partitions to keep TWRP. At least that's how all the other V30 do it, if we don't have flashable TWRP ROM.

ChazzMatt said:
Right. You can't install inferior partial image OTA, if you have TWRP.
Wait for the superior full image KDZ. Flash through LGUP, DL PARTITION, but UNcheck recovery partitions to keep TWRP. At least that's how all the other V30 do it, if we don't have flashable TWRP ROM.
Click to expand...
Click to collapse
Thanks. I'll wait for a flashable TWRP Rom since I've not rooted my phone yet. Might as well just wait for a few days. Hope someone will post one soon.

ChazzMatt said:
Right. You can't install inferior partial image OTA, if you have TWRP.
Wait for the superior full image KDZ. Flash through LGUP, DL PARTITION, but UNcheck recovery partitions to keep TWRP. At least that's how all the other V30 do it, if we don't have flashable TWRP ROM.
Click to expand...
Click to collapse
I don't think that will work for TMobile users. We need to wait for a zip we can flash in TWRP.
Sent from my LG-H932 using XDA Labs

KUSOsan said:
I thought if bootloader was unlocked then you couldn't install an OTA and have to flash it through LG bridge or whatever the program is for flashing kdz? This was last I remember but maybe I missed something.
Click to expand...
Click to collapse
Of course. You are right. Everything has a tradeoff unfortunately but OTA usually requires you to reinstall Magisk to get root back.

Trickymaster said:
Of course. You are right. Everything has a tradeoff unfortunately but OTA usually requires you to reinstall Magisk to get root back.
Click to expand...
Click to collapse
OTA won't even install with TWRP.
And you need TWRP to get Magisk.
Why do people keep only talking about Magisk? TWRP is why you can't and don't want to install an OTA.
---------- Post added at 01:35 AM ---------- Previous post was at 01:35 AM ----------
BROKEN1981 said:
I don't think that will work for TMobile users. We need to wait for a zip we can flash in TWRP.
Click to expand...
Click to collapse
Why not?
You can use LGUP, to DL PARTITION.
You can Uncheck recovery partitions.
You can then boot to TWRP. (hardware dance buttons)
You can then flash Magisk, the no encryption and no Root Check files again.
Is there something I'm missing?
Well, for people who were silly enough to replace their Download mode with 2ND copy of TWRP, NO they can't do that. You need Download mode to flash KDZ via LGUP. But everyone else with H932 can do that.

ChazzMatt said:
Well, for people who were silly enough to replace their Download mode with 2ND copy of TWRP, NO they can't do that. You need Download mode to flash KDZ via LGUP. But everyone else with H932 can do that.
Click to expand...
Click to collapse
Well if you check running thread for h932 root, you will see a guy who said he wished he had a second copy of TWRP on LAF. He paid for it. Not sure what happened but when a DEV gives that type of advice, you take it.
Sent from my LG-H932 using XDA Labs

If you flash laf again, will that bring dl mode back? I'm all gung ho to learn how to convert kdz to a flashable zip. Not sure if my linux machine has enough computing power though.

Xblackberryuser said:
If you flash laf again, will that bring dl mode back? I'm all gung ho to learn how to convert kdz to a flashable zip. Not sure if my linux machine has enough computing power though.
Click to expand...
Click to collapse
Yes, you can flash LAF back. Running posted the zip file.
Sent from my LG-H932 using XDA Labs
---------- Post added at 02:11 AM ---------- Previous post was at 02:08 AM ----------
Xblackberryuser said:
If you flash laf again, will that bring dl mode back? I'm all gung ho to learn how to convert kdz to a flashable zip. Not sure if my linux machine has enough computing power though.
Click to expand...
Click to collapse
Here
https://drive.google.com/file/d/1yQ0KpEr0BAs_opHrrPKZfcYbqzK-K9RW/view?usp=drivesdk
Sent from my LG-H932 using XDA Labs

Thank you. I'm all set, still have it on my sd card from lafsploit.
I'm more interested in learning to convert a kdz to flashable twrp zip.

Xblackberryuser said:
Thank you. I'm all set, still have it on my sd card from lafsploit.
I'm more interested in learning to convert a kdz to flashable twrp zip.
Click to expand...
Click to collapse
Same.
Sent from my LG-H932 using XDA Labs

New update has arrived 11.0.325ST

Good news, global ROM receives New update today.
Lenovo Z6 Pro.

Ok, so what's new / improvements ?

benjieb said:
Ok, so what's new / improvements ?
Click to expand...
Click to collapse
I don't know, I reinstall the firmware and lose the package, now system update refuse to give me again OTA ;-;

benjieb said:
Ok, so what's new / improvements ?
Click to expand...
Click to collapse
I don't have any idea how to recover my update ota, lenovo is trolling me.

I don't understand what your issue is. But if you missed OTA, is will come again soon.
I think one way to help that is to clear cache of update app. Just google it.
While you are there, once the OTA is downloaded to your phone AND before actually upgrading, it would be good to copy the update file to your PC and share it with others who don't get the OTA.

benjieb said:
I don't understand what your issue is. But if you missed OTA, is will come again soon.
I think one way to help that is to clear cache of update app. Just google it.
While you are there, once the OTA is downloaded to your phone AND before actually upgrading, it would be good to copy the update file to your PC and share it with others who don't get the OTA.
Click to expand...
Click to collapse
I found the solution, I'll repost the fastboot link that alexeei provided.
The overall improvements I've been noticing:
Connection problems that sometimes occurred in my region, are no longer giving.
Battery I noticed is lasting about 45 minutes longer.
PT-BR was basically 100% implemented in every layout.
The 4G connection has been improved.
I also believe that they have made some changes in the kernel, because the way the cores are working, is different gives version 284, ie better, I'll find out if in Benchmark improved anything.
And the audio in dolby atmos, I'm feeling that the audio has improved, it's louder and clearer.
camera haven't tested yet
However this is it: D

Here the link
Thanks for @alexeei
https://androidfilehost.com/?fid=1899786940962594224

hehk1234 said:
Here the link
Thanks for @alexeei
https://androidfilehost.com/?fid=1899786940962594224
Click to expand...
Click to collapse
this fastboot requires open bootloader?

x-geo said:
this fastboot requires open bootloader?
Click to expand...
Click to collapse
yes

alexeei said:
yes
Click to expand...
Click to collapse
And i can close it again after install it?

x-geo said:
And i can close it again after install it?
Click to expand...
Click to collapse
No, it's not neccessary

ok, i'll install it after it charges... this version comes with the new 4D Utouch?

In first Thank's a lot for the file !!!!
But after the flash , my phone don't reboot, hopefully reflash Alexeei Twrp solve my problem, evrithing seem ok now.
More info when more tested the rom

@alexeei, the file you shared is full ROW rom?
If so, when flashing with TWRP over an older version of ROW, will it keep data and apps?
Thanks!

I flash over my 284st the alexeei fastboot rom, but with the fastboot .bat.
And i have keep all my app,data and setting.
But the phone don't work in first attempt, must reflash the twrp for fix boot.
Don't know if this problème is only for me or more general.
My config before flash. Rom 11.0.284st + twrp alexeei + magisk 19.3.
Now everything seem ok and perf is good, except aod still dont work.

benjieb said:
@alexeei, the file you shared is full ROW rom?
If so, when flashing with TWRP over an older version of ROW, will it keep data and apps?
Thanks!
Click to expand...
Click to collapse
yes
---------- Post added at 08:27 PM ---------- Previous post was at 08:24 PM ----------
wlcbtd said:
I flash over my 284st the alexeei fastboot rom, but with the fastboot .bat.
And i have keep all my app,data and setting.
But the phone don't work in first attempt, must reflash the twrp for fix boot.
Don't know if this problème is only for me or more general.
My config before flash. Rom 11.0.284st + twrp alexeei + magisk 19.3.
Now everything seem ok and perf is good, except aod still dont work.
Click to expand...
Click to collapse
You only need flash vbmeta with --disable-verity option, i make it default in installer script in future releases.

Ok , thank's for the info !

How can I install this update?

Brillant !
Do you think it can be flashed over CN rom and keep data and apps?
Also, do you know where to find same type of rom file with latest CN rom?
I want to try latest ROW, but I know I will revert back to CN.

ManCast said:
How can I install this update?
Click to expand...
Click to collapse
See post #30 on these tread
https://forum.xda-developers.com/android/help/rom-lenovo-z6-pro-l78051-qpst-edl-t3947149
, same thing for these update.
But only if you already are in raw rom, update from chinese is untested by now.