Untouched ZF2 Stock LP to Stock MM .184 - ZenFone 2 Q&A, Help & Troubleshooting

Hi all, I finally read good news for our MM Stock: it is finally almost bug-free. I read that only the Wi-Fi bug still here, but wait like 10-20 secs of connection doesn't kill me.
So now I am fully ready to update but i don't know anything.
Here is my idea:
1) Do a full erase (Delete every folder/file).
2) Install the full FW of MM .184 downloaded from asus (I don't want a update just a clear install).
Unlucky I read that Asus Flash tool can be a bit crazy with strange errors and maybe can delete important partitions (like unkown imei, lost mac, ect..)
So, can someone please use a bit of his/her time to explain me what can i do? Like a step-to-step guide?
Thanks you very much,
LightDestory.

which firmware number you are currently on?
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
very first fully unroot your mobile. reboot into recovery and clear factory data and reset. ther clear cache partition. then apply updates from adb then. install 2.20.40.184. asuming you are on soem lp version

sukhwant717 said:
which firmware number you are currently on?
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
very first fully unroot your mobile. reboot into recovery and clear factory data and reset. ther clear cache partition. then apply updates from adb then. install 2.20.40.184. asuming you are on soem lp version
Click to expand...
Click to collapse
My phone is untouched: no root, no bt unlocked and my current version is the latest avaible of LP via OTA (so the .198).
I have only the full FW WW-4.21.40.184.zip. The 2.20.40.184 (there is a mistake because it is 2.20.40.198) is LP... but I want to install MM.
Thansk for the fast reply. But, excuse me... I need more info!
I am a bit confused between flash via zip or a raw firmware... I just need the safer way that can erase all and do a clean install..

LightDestory said:
My phone is untouched: no root, no bt unlocked and my current version is the latest avaible of LP via OTA (so the .198).
I have only the full FW WW-4.21.40.184.zip. The 2.20.40.184 (there is a mistake because it is 2.20.40.198) is LP... but I want to install MM.
Thansk for the fast reply. But, excuse me... I need more info!
I am a bit confused between flash via zip or a raw firmware... I just need the safer way that can erase all and do a clean install..
Click to expand...
Click to collapse
Use the directions here: https://www.asus.com/zentalk/ph/thread-98381-1-1.html
But use the 184 file you downloaded
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Use the directions here: https://www.asus.com/zentalk/ph/thread-98381-1-1.html
But use the 184 file you downloaded
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Hi, thanks for the reply.
This is the "update LP to MM" way... is there a way to clear everything and install?

After you do it then factory reset it.
Sent from my ASUS_Z00AD using Tapatalk

I also updated from LP .198 to MM .184 because I heard a lot of problems have been resolved and I am very happy to say that I've had no problems whatsoever. The sound and mini freeze in games problem that I had on MM .134 was solved as well. The battery life is also good. The performance is good, phone works like a charm and I didn't even do a factory reset, I only upgraded and that's it! Kudos to Asus for finally fixingthe problems!

you don't need to do anything. just go into recovery. then click factory data and reset. then clear caxhe partition. then apply update from adb. and then install MM version you downloaded from asus via sideload command.

sukhwant717 said:
you don't need to do anything. just go into recovery. then click factory data and reset. then clear caxhe partition. then apply update from adb. and then install MM version you downloaded from asus via sideload command.
Click to expand...
Click to collapse
Thanks for all the replies. I need just the last info, help me to understand.
1)Go to Recovery and do a factory reset and wipe cache partition (OK... I know how do that)
2) "Apply Update from adb" what means? Factory reset will make my phone like a older version of LP and I have to flash first the .194? or by clicling on 'apply update from adb' the phone will go in a "download mode" and so go to step 3?
3) Sideload MM (OK... i read on zentalk the sideload command)
EDIT:
I am now with STOCK 6.0.1 MM!
I got 2 bootloops but on the third flash the phone booted! WOW!
Moderator can close this.
Thanks again for the help!

Related

HELP! ZenUI and Google Play/Services not working after FACTORY RESET

Hi,
I badly need help as I couldn't launch Google Play even after I installed the APK manually using it's latest version. It all happened after I did a factory reset on the phone hoping that the new firmware (.59) for ZE551ML would go through after doing so.
Now, I couldn't download any of my apps and even all my Google accounts won't sync. I really don't know what to do. I just checked and my phone's SKU was WW. I was thinking it might be a problem with Google if my phone was a CN version. But it is not.
Asus ZE551ML Z00AD
BUILD Number: LRX2IV.WW-ASUS_Z00A-219.40.20_20150623_2193_user044030427_201501060109
Your firmware is .20 not .59 try flashing .22 pre-rooted firmware from shakalaka should solve your problem, follow instructions for changing from CN to WW, instructions located in this forum or on chinaphonearena, it may have the .59 updated today. Yesterday it was just the folder no Rom, haven't checked yet today.
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 10:52 AM ---------- Previous post was at 10:48 AM ----------
Instructions and roms located here:
http://www.chinaphonearena.com/foru...change-CN-to-WW-flash-tutorial?highlight=asus no .59 yet posted
Sent from my ASUS_Z00AD using Tapatalk
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.59-user.zip
Here's the full latest firmware version for WW (international) ZE551ML version. Flash it with adb sideload in stock recovery. Hope this helps. You will lose all data, including internal storage. So please backup everything important to you and export it to PC before flashing.
rlaw said:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.59-user.zip
Here's the full latest firmware version for WW (international) ZE551ML version. Flash it with adb sideload in stock recovery. Hope this helps. You will lose all data, including internal storage. So please backup everything important to you and export it to PC before flashing.
Click to expand...
Click to collapse
I found a very simple solution in flashing this without uaing adb. Complete unroot using SuperSU then copy the file (1 GB) to root (Internal storage) then reset your phone doing manual reboot. Your phone will automatically detect the update then install. Enjoy!
calvinpflores said:
I found a very simple solution in flashing this without uaing adb. Complete unroot using SuperSU then copy the file (1 GB) to root (Internal storage) then reset your phone doing manual reboot. Your phone will automatically detect the update then install. Enjoy!
Click to expand...
Click to collapse
Thanks for sharing.
Which recovery have you used?
alfi07 said:
Thanks for sharing.
Which recovery have you used?
Click to expand...
Click to collapse
Im really not a techie person so forgive me if i might be clueless on this. I didnt really go into any recovery mode. Just did a simble normal reboot of thr phone afyer copying the zip file (note: I didnt chnage the file name) to the Internal Storage folder then aftr that, i was prompted for the system update. Oh i have cwm installed but i didnt boot or flash it through that though. Ive noticed there were 2 versions of that .59 update posted here. Earlier was jist 21MB and this 2nd one is about 1.1GB. Not sure if that jas anything to do with the ADB flashing issue i encountered earlier with the Status 7 error.

Help, back to stock from lollipop

Hi, first of all:sorry my english. I have a 820n from Orange spain. Im S-On. Twrp and Tomal's Discovery rom. When i got the smartphone, it was on kitkat, i updated via wifi to lollipop, then i rooted it and install tomal rom. I have a Ruu oficial from Orange, but its kitkat Ruu, when i try to install it stuck on 4%. I relock bootloader and install stock recovery when i try to flash the Kitkat Ruu, but always stuck on 4%. Anyone can help me? Its because im on lollipop firmware now? What i can do? Only wait for another official lollipop Ruu from orange? Thanks
Unlock BL, flash newest TWRP from fergy, wipe, and flash this http://forum.xda-developers.com/desire-820/development/recovery-htc-desire-d820n-stock-t3104448
Then you go back to stock. Remember, don't relock BL when you have custom kernel like in tomal rom
Thanks a lot Skorupa123 tomorrow i will test. Only last question: if i am on tomals 2.0 (lollipop) and i flash that dump i will be able to flash kitkat ruu?
After test, didnt work. Unable to flash stock ruu.
TyrellCorporation said:
Thanks a lot Skorupa123 tomorrow i will test. Only last question: if i am on tomals 2.0 (lollipop) and i flash that dump i will be able to flash kitkat ruu?
Click to expand...
Click to collapse
No
---------- Post added at 06:45 AM ---------- Previous post was at 06:37 AM ----------
TyrellCorporation said:
After test, didnt work. Unable to flash stock ruu.
Click to expand...
Click to collapse
5.0.2 Europe HTC Desire d820n,процессор Qualcomm Factory https://yadi.sk/d/dEwiblxjmieVS 4.4.4 Factory https://yadi.sk/d/OrB3smMAmiGoy
Thanks a lot vuk1963. Will test today.
Downloading 5.0.2 Europe file, but im S-On . If CID doesnt match, then i go to crash again. I will test anyway.
vuk1963 said:
No
---------- Post added at 06:45 AM ---------- Previous post was at 06:37 AM ----------
5.0.2 Europe HTC Desire d820n,процессор Qualcomm Factory https://yadi.sk/d/dEwiblxjmieVS 4.4.4 Factory https://yadi.sk/d/OrB3smMAmiGoy
Click to expand...
Click to collapse
Its that 5.0.2 from ORANGE SPAIN?
This Europe,stock
vuk1963 said:
This Europe,stock
Click to expand...
Click to collapse
I was able to flash that backup but i think its no-secure (preinstalled external russian email and recover data..) and i can't get updates from my operator to upgrade.
I can't restore default settings, when i try to "set devide to defaults" the devide stucks on recovery.
TyrellCorporation said:
I was able to flash that backup but i think its no-secure (preinstalled external russian email and recover data..) and i can't get updates from my operator to upgrade.
I can't restore default settings, when i try to "set devide to defaults" the devide stucks on recovery.
Click to expand...
Click to collapse
It is necessary to establish the stock rekaveri and reset the default settings
vuk1963 said:
It is necessary to establish the stock rekaveri and reset the default settings
Click to expand...
Click to collapse
Just make it work now
1- I flash the russian stock backup
2- I reboot into recovery and wipe all, then i re-start the system and it was totally stock (no russian languaje, no preconfigured system)
3- i get the OTA from orange and i rename it to 0PFJIMG.zip and i put on sdcard (Ext), then i install it.
4- i flash stock recovery from firmware.zip inside the OTA
5- i re-lock the bootloader
6- done, all stock. No orange apps, but better keep away that bloatware.
7 - Thanks friend

How can I get my recovery back?

Hi guys
I was trying to get TWRP on my ZE551ML (WW-2.20.40.198). In order to do that, I tried to unlock the bootloader using this guide. I don't believe it worked, though, because every time I tried to flash TWRP through Fastboot or the app, it failed.
So now, I don't have any recovery at all. If I go to the bootloader and select "RECOVERY MODE", the phone just restarts and goes to the same bootloader again. So I got neither the stock recovery, nor TWRP.
I did manage to root and install Xposed, though, both through adb. What worries me, though, is that if I mess up my phone somehow, I won't be able to flash stock firmware or a backup. I would actually prefer to have the stock recovery at this point.
What can I do? I need the stock recovery to flash the stock firmware, but I can't.
I've tried Asus Flashtool before, but it didn't work. I think maybe it's because I tried it on Windows 10, some users said it worked better with Windows 7.
Help would be greatly appreciated.
You fastboot flash stock recovery for .198 in bootloader state.
timbernot said:
You fastboot flash stock recovery for .198 in bootloader state.
Click to expand...
Click to collapse
Where can I get the stock recovery?
http://forum.xda-developers.com/showthread.php?t=3096596
Sent from my Zenfone 2 using Tapatalk
https://mega.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw
kenbo111 said:
http://forum.xda-developers.com/showthread.php?t=3096596
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
Thanks, but I don't see .198 in the list, though?
timbernot said:
https://mega.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw
Click to expand...
Click to collapse
Thanks, but I don't see .198 in the list, though?
4.20 .40 .184 or above should be fine for 551
I cannot open the link here on this , is there recovery for 194 or 6 ? Too
timbernot said:
4.20 .40 .184 or above should be fine for 551
I cannot open the link here on this , is there recovery for 194 or 6 ? Too
Click to expand...
Click to collapse
What happens if it's not fine? Do I have anything to lose?
You will be ok as long it is 551 , 184 and above same .184I think was last full fw and others after were incremental otas after, smallish
timbernot said:
4.20 .40 .184 or above should be fine for 551
I cannot open the link here on this , is there recovery for 194 or 6 ? Too
Click to expand...
Click to collapse
Yeah, 196 is there, is that alright? I'm afraid of brickng the phone.
Yup
---------- Post added at 10:17 PM ---------- Previous post was at 10:11 PM ----------
FYI You can flash .184 or above and have MM.134 FW on internal sd and get notification to update after a reboot
timbernot said:
Yup
---------- Post added at 10:17 PM ---------- Previous post was at 10:11 PM ----------
FYI You can flash .184 or above and have MM.134 FW on internal sd and get notification to update after a reboot
Click to expand...
Click to collapse
I did it, used Fastboot to flash .196 recovery.img. I can now access the stock recovery again! Thank you guys so much for the help! This was a big deal to me, I had been feeling so uncomfortable without having access to the recovery! Thank you!! Will try restoring the stock firmware tomorrow.
Fiksdal said:
I did it, used Fastboot to flash .196 recovery.img. I can now access the stock recovery again! Thank you guys so much for the help! This was a big deal to me, I had been feeling so uncomfortable without having access to the recovery! Thank you!! Will try restoring the stock firmware tomorrow.
Click to expand...
Click to collapse
Cool! Nice job
Sent from my Zenfone 2 using Tapatalk
kenbo111 said:
Cool! Nice job
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
By the way, rather than flashing the .198 firmware again, I think it might be a good idea to flash "UL-Z00A-WW-2.20.40.196" from here since that will then correspond to the recovery file I flashed? Thoughts?
timbernot said:
You will be ok as long it is 551 , 184 and above same .184I think was last full fw and others after were incremental otas after, smallish
Click to expand...
Click to collapse
Should I now flash the 196 or the 198 firmware through adb? If I flash the 198, will it also restore 198 recovery? I've posted a new thread about it.
Already answered earlier at FYI above
.put MM 4-21.40.134 on internal sd and reboot
Have you not tried ?
No need for multiple threads
Ps , if don't get notification ,go to file manager and add .zip to the end so it looks like user.zip.zip save and reboot again
timbernot said:
Already answered earlier at FYI above
.put MM 4-21.40.134 on internal sd and reboot
Have you not tried ?
No need for multiple threads
Ps , if don't get notification ,go to file manager and add .zip to the end so it looks like user.zip.zip save and reboot again
Click to expand...
Click to collapse
Oh, sorry, I didn't notice it last time around, I was too excited about getting my recovery back
But what if I don't want Marshmallow, though? If I just want to stay on Lollipop? Do I just flash 198 and that's it?
timbernot said:
Already answered earlier at FYI above
.put MM 4-21.40.134 on internal sd and reboot
Have you not tried ?
No need for multiple threads
Ps , if don't get notification ,go to file manager and add .zip to the end so it looks like user.zip.zip save and reboot again
Click to expand...
Click to collapse
Actually, I flashed 196, and then I got 198 OTA the moment I booted . I guess that means I've got the 198 recovery too, now?
Yup , like mentioned previous , recovery will be the same from .184 lp

I have a big problem, erasing internal storage with twrp

Hello Guys
I have a big problem
I installed twrp and unlock bootloader with no problem
But i try to install a Lineage Os , but after all wipe and flashing it , my internal storage is erased , and when enter in TWRP There are only a Micro Sd not not Internal Storage
The value of Internal Storage is 0
I can Rescue my phone??
I'm not very happy
I need a big HELP
or i lose my money and wonderful Phone
Please help me
Repair that with twrp options
I try , i flash with minimal adb the firmware huawei with extractor, rom stock run , but the display is black , i can't enter in bootloader , how i can repair? i'm very busy
i don't understand
dadi90 said:
I try , i flash with minimal adb the firmware huawei with extractor, rom stock run , but the display is black , i can't enter in bootloader , how i can repair? i'm very busy
i don't understand
Click to expand...
Click to collapse
Oh man which firmware you flashed ?
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
Another phones firmware relsults to device dead.
Help
venugopalu007 said:
Oh man which firmware you flashed ?
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
Another phones firmware relsults to device dead.
Click to expand...
Click to collapse
I'll explain my situation
I unblocked the bootloader and installed the Twrp without any problems
But first flashing the AOP and then the Lineage, I had first lost the internal memory, then recovered it.
Now when flash roms mod, the smartphone is in bootloop
O BRICK
I'm trying to flash the original firmware, but when I put DLOAD in the SD i am mistaken
And also with Huawei's Erecovery
My Honor 8 pro is currently installed with TWRP, but I can not install an official ROM or not to run it.
I am desperate
info
dadi90 said:
I'll explain my situation
I unblocked the bootloader and installed the Twrp without any problems
But first flashing the AOP and then the Lineage, I had first lost the internal memory, then recovered it.
Now when flash roms mod, the smartphone is in bootloop
O BRICK
I'm trying to flash the original firmware, but when I put DLOAD in the SD i am mistaken
And also with Huawei's Erecovery
My Honor 8 pro is currently installed with TWRP, but I can not install an official ROM or not to run it.
I am desperate
Click to expand...
Click to collapse
P.S Before Unlock Bootloader , i have the b172 Europe , i'm italian but Honor 8 pro is from Netherderlands
You need to have B172 fullOTA, then follow these steps.
Boot into TWRP, then flash the update.zip, after that without rebooting flash update_full_DUK-L09_hw_xx.zip and update_data_full_public.zip files. Wait untill they finish.
Factory reset and you should be good
dadi90 said:
I'll explain my situation
I unblocked the bootloader and installed the Twrp without any problems
But first flashing the AOP and then the Lineage, I had first lost the internal memory, then recovered it.
Now when flash roms mod, the smartphone is in bootloop
O BRICK
I'm trying to flash the original firmware, but when I put DLOAD in the SD i am mistaken
And also with Huawei's Erecovery
My Honor 8 pro is currently installed with TWRP, but I can not install an official ROM or not to run it.
I am desperate
Click to expand...
Click to collapse
Italian honor 8 pro , can i know the firmware version to search for firmware.
info
PalakMi said:
You need to have B172 fullOTA, then follow these steps.
Boot into TWRP, then flash the update.zip, after that without rebooting flash update_full_DUK-L09_hw_xx.zip and update_data_full_public.zip files. Wait untill they finish.
Factory reset and you should be good
Click to expand...
Click to collapse
I try but when use files in TWRP , give me a error in recovery and i can't flash files
info
venugopalu007 said:
Italian honor 8 pro , can i know the firmware version to search for firmware.
Click to expand...
Click to collapse
i have first b122 and successfully updating with ota in 133
dadi90 said:
i have first b122 and successfully updating with ota in 133
Click to expand...
Click to collapse
So you got running good now??
dadi90 said:
i have first b122 and successfully updating with ota in 133
Click to expand...
Click to collapse
How good?
no , i can use my phone with OS , only with rom of Morph in guide stock, i extract the firmware with huawei extractor, and i flashed cust, system, boot,recovery with adb
Now Phone Run Os , but is a NRDM90 keys ,, don't working a camera and another function
I try with Twrp and recovery stock but give a error always
I feel like crying
I do not know how to do
To get it back stock
Or at least with a rom in twrp
Nothing works
I spent 500 euro of burned phone so
I am desperate
dadi90 said:
no , i can use my phone with OS , only with rom of Morph in guide stock, i extract the firmware with huawei extractor, and i flashed cust, system, boot,recovery with adb
Now Phone Run Os , but is a NRDM90 keys ,, don't working a camera and another function
I try with Twrp and recovery stock but give a error always
I feel like crying
I do not know how to do
To get it back stock
Or at least with a rom in twrp
Nothing works
I spent 500 euro of burned phone so
I am desperate
Click to expand...
Click to collapse
Bro now can you flash the firmware in twrp
Step one format data and reboot again and to twrp wipe all and flash the firmware.
---------- Post added at 12:09 PM ---------- Previous post was at 12:06 PM ----------
dadi90 said:
no , i can use my phone with OS , only with rom of Morph in guide stock, i extract the firmware with huawei extractor, and i flashed cust, system, boot,recovery with adb
Now Phone Run Os , but is a NRDM90 keys ,, don't working a camera and another function
I try with Twrp and recovery stock but give a error always
I feel like crying
I do not know how to do
To get it back stock
Or at least with a rom in twrp
Nothing works
I spent 500 euro of burned phone so
I am desperate
Click to expand...
Click to collapse
Also bro the nrd keys also appears when the firmware is different region.
flash with twrp or stock recovery? i downloaded all firmware from ru website
when i try in twrp , this method failed
i have bought a honor 8 pro in UNIEURO in ITALY , the product have name DUK-L09 from netherlands
how i can search the right firmware????
info
i formact data , reboot in recovery twrp
i do all wipe
i flashing and i have this error
error have name
i upload the image
Repair internal storage with repair option in TWRP
With type of partition? ext3??
dadi90 said:
With type of partition? ext3??
Click to expand...
Click to collapse
Try Ext 4 but i think this wont work , try the rebranding guide to unbrick

How can i remove root without using Magisk ?

Hi guys,
I rooted my phone using the first method (flashing patched boot on A and B).
The problem is that magisk disappeared from my phone and i was wondering how can i remove root and have the original firmware again.
I am currently on the august patch.
You can check @BubuXP's reply here it might help you out.
Solved?
lb1331 said:
Solved?
Click to expand...
Click to collapse
I flashed original boot img but OTA still doesn't apply.
The only solution might be to flash stock rom 9.4.0 (July) using MI flash tool but i'm afraid that It isn't possible to do it
Installed org boot with A/B?
Did u modify system partition? Like build.prop OR something?
If nothing works you must try using MI Flash tool with the stock ROM
lb1331 said:
Installed org boot with A/B?
Did u modify system partition? Like build.prop OR something?
If nothing works you must try using MI Flash tool with the stock ROM
Click to expand...
Click to collapse
I flashed original boot img on both partition and the update failed...
Do you think flashing an older version 9.4 causes problems ?
Now i'm running on version 9.6
http://en.miui.com/getrom.php?r=354&m=yes&app=false
http://api.bbs.miui.com/url/MiFlash
You will lose all your data by doing this.
If you want to keep the data tell me
lb1331 said:
http://en.miui.com/getrom.php?r=354&m=yes&app=false
http://api.bbs.miui.com/url/MiFlash
You will lose all your data by doing this.
If you want to keep the data tell me
Click to expand...
Click to collapse
I have downloads the files on the computer, now what do i do ?
lb1331 said:
http://en.miui.com/getrom.php?r=354&m=yes&app=false
http://api.bbs.miui.com/url/MiFlash
You will lose all your data by doing this.
If you want to keep the data tell me
Click to expand...
Click to collapse
I would like to keep data
Connect the Phone to the pc via USB in the flash tool must say "refresh" once you click refresh must apear your device with de adb/fastboot id. Then click select, choose the folder you've downloadwd, then click flash. Now wait until the flash tool says "flashed".
After that your Phone must have stock ROM ready for OTA. If you want to keep magisk i'll recomend you to follow BubuXp guide to install magisk with proper support for OTA's
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
fake__knv said:
You can check @BubuXP's reply here it might help you out.
Click to expand...
Click to collapse
If u want to keep data use the guide in the link
lb1331 said:
Connect the Phone to the pc via USB in the flash tool must say "refresh" once you click refresh must apear your device with de adb/fastboot id. Then click select, choose the folder you've downloadwd, then click flash. Now wait until the flash tool says "flashed".
After that your Phone must have stock ROM ready for OTA. If you want to keep magisk i'll recomend you to follow BubuXp guide to install magisk with proper support for OTA's
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
If u want to keep data use the guide in the link
Click to expand...
Click to collapse
Thank you very much, i will do it tomorrow.
One lady question, i saw that the rom is 9.4 while my device is running 9.6.
Is this a problem ?
There's no problem it will flash everything a leave the device with stock ROM, i recomend you to use the first way, you will lose the data, but I think is better, anyway i think both methods will lock the bootloader, so anyway you will lose the data, make backup and If u need something tell me.
Good luck, LB
lb1331 said:
There's no problem it will flash everything a leave the device with stock ROM, i recomend you to use the first way, you will lose the data, but I think is better, anyway i think both methods will lock the bootloader, so anyway you will lose the data, make backup and If u need something tell me.
Good luck, LB
Click to expand...
Click to collapse
Today i flashed system img instead of flashing stock rom and i finally installed OTA. )
=D

Categories

Resources