Develop Bugs

[Q] unlock bootloader and OTA

I know some will say its answered somewhere in the forum , but i searched and it didnt give me a clear answer,
if i unlocked the bootloader and installed CWM and rooted my phone wothout flashing a new ROM, will i lose the ability to recive OTAs?
one more thing (sorry im asking alot) unlocking bootloader says that it will erase all phone data , does that include the SD card part of our phone since its internal ? will i lose the photos stored , or its just like flashing an RUU
Thank you so much

ahm09 said:
I know some will say its answered somewhere in the forum , but i searched and it didnt give me a clear answer,
if i unlocked the bootloader and installed CWM and rooted my phone wothout flashing a new ROM, will i lose the ability to recive OTAs?
one more thing (sorry im asking alot) unlocking bootloader says that it will erase all phone data , does that include the SD card part of our phone since its internal ? will i lose the photos stored , or its just like flashing an RUU
Thank you so much
Click to expand...
Click to collapse
Firstly, yes you will lose the ability to receive OTA updates. With regards to the SD Card this will remain untouched.

dr9722 said:
Firstly, yes you will lose the ability to receive OTA updates. With regards to the SD Card this will remain untouched.
Click to expand...
Click to collapse
Thanks for your quick reply , so if i managed to download the OTA from the web can i flash them Manually knowing that i still have the stock ROM

ahm09 said:
Thanks for your quick reply , so if i managed to download the OTA from the web can i flash them Manually knowing that i still have the stock ROM
Click to expand...
Click to collapse
Are you planning on using a stock rom or a custom rom?
EDIT: Sorry didn't read properly. Yes if you are using stock rom then you should be able to download the OTA update from somewhere on XDA. If you are using a custom rom then the chances are the Dev would have already updated there rom to the latest base.

dr9722 said:
Are you planning on using a stock rom or a custom rom?
Click to expand...
Click to collapse
for the time being I'm staying with the stock ROM , my only aim here is to get root access nothing more
EDIT: sorry i replied before seeing the edit , thanks a lot for the help

ahm09 said:
for the time being I'm staying with the stock ROM , my only aim here is to get root access nothing more
EDIT: sorry i replied before seeing the edit , thanks a lot for the help
Click to expand...
Click to collapse
Sorry to ask additional question:
If I intended to use stock ROM only and continue to receive OTA update but with rooted phone. What is the best suggestion?

phonixloo said:
Sorry to ask additional question:
If I intended to use stock ROM only and continue to receive OTA update but with rooted phone. What is the best suggestion?
Click to expand...
Click to collapse
in my understanding , you will have to unlock the bootloader and install a CWM recovery to root your phone and keep the stock ROM, but you will have to download and install the OTAs manually
see this link for more info : http://forum.xda-developers.com/showthread.php?t=1577671

phonixloo said:
Sorry to ask additional question:
If I intended to use stock ROM only and continue to receive OTA update but with rooted phone. What is the best suggestion?
Click to expand...
Click to collapse
Just flash back the stock recovery, relock the bootloader, reboot the phone, receive OTA update and install. Then re-root process again to have root access.

ahm09 said:
in my understanding , you will have to unlock the bootloader and install a CWM recovery to root your phone and keep the stock ROM, but you will have to download and install the OTAs manually
see this link for more info : http://forum.xda-developers.com/showthread.php?t=1577671
Click to expand...
Click to collapse
But I suppose this way you can't update the HBOOT and Radio ....
---------- Post added at 02:03 PM ---------- Previous post was at 01:59 PM ----------
ckpv5 said:
Just flash back the stock recovery, relock the bootloader, reboot the phone, receive OTA update and install. Then re-root process again to have root access.
Click to expand...
Click to collapse
Just wonder where to find the stock recovery? If my ROM is 1.28.xxxx then I must use back the 1.28.xxx stock recovery img file, isn't it? Where should I look for the exact stock recovery img file?

phonixloo said:
Just wonder where to find the stock recovery? If my ROM is 1.28.xxxx then I must use back the 1.28.xxx stock recovery img file, isn't it? Where should I look for the exact stock recovery img file?
Click to expand...
Click to collapse
This is the stock recovery for 1.28.707.10, I believe yours is same as mine.

I deleted stock apps, help! :(

Hello I tried rooting my device using Kingo Root, well it was rooted successfully. Now, I messed up in deleting some bloatware apps from a list I saw before making a backup . Then when I click the settings>about device, it crashes. Then when I try to factory reset, the apps I uninstalled didn't came back. Please let me know what to do, I just want to make the phone the way I got it then root it.
ps: I googled and some say flash the stock room, I'm scared to flash it because I don't know the firmware version of my phone since I can't access the About device of my phone. I'm in the Philippines btw.
pps: I don't know if it might help but, I installed Kies and the fimware was the latest and it was: PDA:NC2 / PHONE:NA3 / CSC:NC2 (AFR); I don't know how to read that, no google result so far. I'm planning to download firmware from this site: //samsung-updates.com/device/?id=GT-I9082
Please help me Thank you!

Count_Alucard said:
Hello I tried rooting my device using Kingo Root, well it was rooted successfully. Now, I messed up in deleting some bloatware apps from a list I saw before making a backup . Then when I click the settings>about device, it crashes. Then when I try to factory reset, the apps I uninstalled didn't came back. Please let me know what to do, I just want to make the phone the way I got it then root it.
ps: I googled and some say flash the stock room, I'm scared to flash it because I don't know the firmware version of my phone since I can't access the About device of my phone. I'm in the Philippines btw.
pps: I don't know if it might help but, I installed Kies and the fimware was the latest and it was: PDA:NC2 / PHONE:NA3 / CSC:NC2 (AFR); I don't know how to read that, no google result so far. I'm planning to download firmware from this site: //samsung-updates.com/device/?id=GT-I9082
Please help me Thank you!
Click to expand...
Click to collapse
Download your firmware from here
http://rapidgator.net/file/6d455e2efafccb40717f79f84756ad9d
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
And here is the instructions http://forum.xda-developers.com/showthread.php?p=62021804

Yousef Mohamed said:
Download your firmware from here
http://rapidgator.net/file/6d455e2efafccb40717f79f84756ad9d
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
And here is the instructions http://forum.xda-developers.com/showthread.php?p=62021804
Click to expand...
Click to collapse
Thank you! I'm downloading it now. I hope it'll return my phone the way it was when I got it. After flashing this, do I get root access and custom recovery? If not, would you please lead me to a link I can follow to root and add custom recovery so I can backup my device. Thanks

Count_Alucard said:
Thank you! I'm downloading it now. I hope it'll return my phone the way it was when I got it. After flashing this, do I get root access and custom recovery? If not, would you please lead me to a link I can follow to root and add custom recovery so I can backup my device. Thanks
Click to expand...
Click to collapse
Put SuperSU in your SDcard
Just Flash this recovery with Odin
Make Sure "Auto-Reboot is not ticked Because Stock Android Restores Stock Recovery
When You get "RESET" in odin
Remove the battery from the and boot to recovery directly
And then flash SuperSU

Count_Alucard said:
Thank you! I'm downloading it now. I hope it'll return my phone the way it was when I got it. After flashing this, do I get root access and custom recovery? If not, would you please lead me to a link I can follow to root and add custom recovery so I can backup my device. Thanks
Click to expand...
Click to collapse
Also, if possible, please make a backup of your partions. (EFS, CSC, etc).

NeoLogY said:
Also, if possible, please make a backup of your partions. (EFS, CSC, etc).
Click to expand...
Click to collapse
CSC Doesn't matter Because its Cache
Almost All Partitions are recoverable except EFS

Yousef Mohamed said:
CSC Doesn't matter Because its Cache
Almost Partition is recoverable except EFS
Click to expand...
Click to collapse
I know, just mentioning couple of unseen partition(from the system).

Yousef Mohamed said:
Put SuperSU in your SDcard
Just Flash this recovery with Odin
Make Sure "Auto-Reboot is not ticked Because Stock Android Restores Stock Recovery
When You get "RESET" in odin
Remove the battery from the and boot to recovery directly
And then flash SuperSU
Click to expand...
Click to collapse
Thanks, I got it rooted now. You solved my problem
NeoLogY said:
I know, just mentioning couple of unseen partition(from the system).
Click to expand...
Click to collapse
Is there other ways to backup the things you have said? I just maid a nandroid backup using Clockwork Mod.
I have another question if it's not too much to ask but, do you know how to swap the internal and external memory of this phone? I would like to know how. Thanks for your help! Especially Yousef!

Count_Alucard said:
Thanks, I got it rooted now. You solved my problem
Is there other ways to backup the things you have said? I just maid a nandroid backup using Clockwork Mod.
I have another question if it's not too much to ask but, do you know how to swap the internal and external memory of this phone? I would like to know how. Thanks for your help! Especially Yousef!
Click to expand...
Click to collapse
You can use Partition Backup app. Nandroid backup will backup most of the main partition, but i prefer third party app which will show some unseen partition.
As for the memory thing, i believe @Yousef Mohamed have better knowledge, he even made a flashable zip for expanding the internal memory size.

NeoLogY said:
You can use Partition Backup app. Nandroid backup will backup most of the main partition, but i prefer third party app which will show some unseen partition.
As for the memory thing, i believe @Yousef Mohamed have better knowledge, he even made a flashable zip for expanding the internal memory size.
Click to expand...
Click to collapse
Gonna try it out thanks. I'm going to do what I learned from here to my future devices Yeah, I hope Yousef does reply.

EFS is most important "recoverable" partition
Bootloader partitions are the most important because without them you can't even boot the phone ( you can't boot to download mode , recovery mode or even the OS )
So you can't recover it

Count_Alucard said:
Gonna try it out thanks. I'm going to do what I learned from here to my future devices Yeah, I hope Yousef does reply.
Click to expand...
Click to collapse
You might wanna check his thread.
http://forum.xda-developers.com/showthread.php?t=3116730

Untouched ZF2 Stock LP to Stock MM .184

Hi all, I finally read good news for our MM Stock: it is finally almost bug-free. I read that only the Wi-Fi bug still here, but wait like 10-20 secs of connection doesn't kill me.
So now I am fully ready to update but i don't know anything.
Here is my idea:
1) Do a full erase (Delete every folder/file).
2) Install the full FW of MM .184 downloaded from asus (I don't want a update just a clear install).
Unlucky I read that Asus Flash tool can be a bit crazy with strange errors and maybe can delete important partitions (like unkown imei, lost mac, ect..)
So, can someone please use a bit of his/her time to explain me what can i do? Like a step-to-step guide?
Thanks you very much,
LightDestory.

which firmware number you are currently on?
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
very first fully unroot your mobile. reboot into recovery and clear factory data and reset. ther clear cache partition. then apply updates from adb then. install 2.20.40.184. asuming you are on soem lp version

sukhwant717 said:
which firmware number you are currently on?
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
very first fully unroot your mobile. reboot into recovery and clear factory data and reset. ther clear cache partition. then apply updates from adb then. install 2.20.40.184. asuming you are on soem lp version
Click to expand...
Click to collapse
My phone is untouched: no root, no bt unlocked and my current version is the latest avaible of LP via OTA (so the .198).
I have only the full FW WW-4.21.40.184.zip. The 2.20.40.184 (there is a mistake because it is 2.20.40.198) is LP... but I want to install MM.
Thansk for the fast reply. But, excuse me... I need more info!
I am a bit confused between flash via zip or a raw firmware... I just need the safer way that can erase all and do a clean install..

LightDestory said:
My phone is untouched: no root, no bt unlocked and my current version is the latest avaible of LP via OTA (so the .198).
I have only the full FW WW-4.21.40.184.zip. The 2.20.40.184 (there is a mistake because it is 2.20.40.198) is LP... but I want to install MM.
Thansk for the fast reply. But, excuse me... I need more info!
I am a bit confused between flash via zip or a raw firmware... I just need the safer way that can erase all and do a clean install..
Click to expand...
Click to collapse
Use the directions here: https://www.asus.com/zentalk/ph/thread-98381-1-1.html
But use the 184 file you downloaded
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Use the directions here: https://www.asus.com/zentalk/ph/thread-98381-1-1.html
But use the 184 file you downloaded
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Hi, thanks for the reply.
This is the "update LP to MM" way... is there a way to clear everything and install?

After you do it then factory reset it.
Sent from my ASUS_Z00AD using Tapatalk

I also updated from LP .198 to MM .184 because I heard a lot of problems have been resolved and I am very happy to say that I've had no problems whatsoever. The sound and mini freeze in games problem that I had on MM .134 was solved as well. The battery life is also good. The performance is good, phone works like a charm and I didn't even do a factory reset, I only upgraded and that's it! Kudos to Asus for finally fixingthe problems!

you don't need to do anything. just go into recovery. then click factory data and reset. then clear caxhe partition. then apply update from adb. and then install MM version you downloaded from asus via sideload command.

sukhwant717 said:
you don't need to do anything. just go into recovery. then click factory data and reset. then clear caxhe partition. then apply update from adb. and then install MM version you downloaded from asus via sideload command.
Click to expand...
Click to collapse
Thanks for all the replies. I need just the last info, help me to understand.
1)Go to Recovery and do a factory reset and wipe cache partition (OK... I know how do that)
2) "Apply Update from adb" what means? Factory reset will make my phone like a older version of LP and I have to flash first the .194? or by clicling on 'apply update from adb' the phone will go in a "download mode" and so go to step 3?
3) Sideload MM (OK... i read on zentalk the sideload command)
EDIT:
I am now with STOCK 6.0.1 MM!
I got 2 bootloops but on the third flash the phone booted! WOW!
Moderator can close this.
Thanks again for the help!

Help needed ! stuck in Bootloop

Hey guys. Today I tried rooting for the first time using this guide
In the third step of the article "3.Flashing TWRP and Rooting via TWRP" I pressed cancel when it asks for an encryption password(I hadn't put one yet). I also flashed the english TWRP( Recovery file) and not the one provided in the article . Now the phone just wont boot. Whenever I try to boot it, it gives me the error message:
"Your device has been unlocked and cannot be trusted.
ID: N/A"
And TWRP comes up everytime .
When i try booting from factory it shows:
"Your device has been unlocked and cannot be trusted.
ID: bad key"
and TWRP comes up.
The phone is still recognized in adb.I still haven't flashed SuperSU if that helps.
Should i Flash stock recovery and try again ?
Please send help, guys.

porthumor said:
Hey guys. Today I tried boot for the first time using this guide
In the third step of the article "3.Flashing TWRP and Rooting via TWRP" I pressed cancel when it asks for a password. I also flashed the english TWRP( Recovery file) and not the one provided in the article . Now the phone just wont boot. Whenever I try to boot it, it gives me the error message:
"Your device has been unlocked and cannot be trusted.
ID: N/A"
And TWRP comes up everytime .
When i try booting from factory it shows:
"Your device has been unlocked and cannot be trusted.
ID: bad key"
and TWRP comes up.
The phone is still recognized in adb.I still haven't flashed SuperSU if that helps.
Should i Flash stock recovery and try again ?
Please send help, guys.
Click to expand...
Click to collapse
I have similar problem like yours. The solution to boot your drvice. If your in twrp go to advance - reboot - bootloader. And in bootloader menu click start. And your phone now is booted
This is a alternative solution. But it wont damage your device. Trust me

Kap_Tutan said:
I have similar problem like yours. The solution to boot your drvice. If your in twrp go to advance - reboot - bootloader. And in bootloader menu click start. And your phone now is booted
This is a alternative solution. But it wont damage your device. Trust me
Click to expand...
Click to collapse
Tried this . It displays :
"Your device has been unlocked and cannot be trusted.
ID: bad key"
Reboots to show :
"Your device has been unlocked and cannot be trusted.
ID: N/A"
and goes into TWRP .

I think you need to flash new logo bin from here
https://forum.xda-developers.com/moto-z-play/themes/logo-bin-t3538153

mijing said:
I think you need to flash new logo bin from here
https://forum.xda-developers.com/moto-z-play/themes/logo-bin-t3538153
Click to expand...
Click to collapse
How will flashing a new logo help me get out of boot loop ? AFAIK it only replaces the warning.

porthumor said:
How will flashing a new logo help me get out of boot loop ? AFAIK it only replaces the warning.
Click to expand...
Click to collapse
I am not sure but
Yes
If showing "Your device has been unlocked and cannot be trusted"
I fix my device flashing new logo bin .

mijing said:
I am not sure but
Yes
If showing "Your device has been unlocked and cannot be trusted"
I fix my device flashing new logo bin .
Click to expand...
Click to collapse
Well thank you for the tip but that's not the problem here.The problem is that my phone never boots into OS ,it is stuck in recovery.Any Indication as to why would be a huge help !

porthumor said:
Well thank you for the tip but that's not the problem here.The problem is that my phone never boots into OS ,it is stuck in recovery.Any Indication as to why would be a huge help !
Click to expand...
Click to collapse
Are you sure OS is even there?

flashallthetime said:
Are you sure OS is even there?
Click to expand...
Click to collapse
I don't think I messed with the OS . I just unlocked the bootloader and flashed TWRP without flashing SuperSU.(done it for the first time for my Moto Z play). Used Wipe to clear davlik,cache and that's it.haven't done anything in the recovery since then.
The only thing i remember messing up was to not input the encryption key when it prompt me for it by clicking cancel.
I've read in some forums that it doesn't boot if it doesn't have SuperSU flashed,but I'm not sure if it's safe since i don't exactly know what might or might now permanently brick my phone.
Also some forums had something to do with patching the kernels (don't know if that's what you call it) but i don't know if it's a safe thing to do since it might also permanently brick my phone.
Running Nougat April Security Patch.

porthumor said:
I don't think I messed with the OS . I just unlocked the bootloader and flashed TWRP without flashing SuperSU.(done it for the first time for my Moto Z play). Used Wipe to clear davlik,cache and that's it.haven't done anything in the recovery since then.
The only thing i remember messing up was to not input the encryption key when it prompt me for it by clicking cancel.
I've read in some forums that it doesn't boot if it doesn't have SuperSU flashed,but I'm not sure if it's safe since i don't exactly know what might or might now permanently brick my phone.
Also some forums had something to do with patching the kernels (don't know if that's what you call it) but i don't know if it's a safe thing to do since it might also permanently brick my phone.
Running Nougat April Security Patch.
Click to expand...
Click to collapse
You used the Chinese TWRP originally? Now you have alberto97 TWRP? Is this correct?
I would flash a custom ROM, why I'm saying that is it's far safer flashing a zip ROM than trying to flash the stock firmware.
Again I will remind people the flashing bootloaders on moto devices will inevitably cause hard bricks if you downgrade and the accept an ota.
---------- Post added at 06:47 PM ---------- Previous post was at 06:39 PM ----------
The only solution and this applies only if you want to remain on the stock ROM.
Download the retail firmware and only manually flash the boot.img, the 10 sparsechunks and the OEM.img.
Do not use rsdlite!!
This should boot your phone.

flashallthetime said:
You used the Chinese TWRP originally? Now you have alberto97 TWRP? Is this correct?
Click to expand...
Click to collapse
Yes,exactly.
flashallthetime said:
I would flash a custom ROM, why I'm saying that is it's far safer flashing a zip ROM than trying to flash the stock firmware.
Click to expand...
Click to collapse
Which Custom ROM do you think is the safest possible alternative?
flashallthetime said:
Again I will remind people the flashing bootloaders on moto devices will inevitably cause hard bricks if you downgrade and the accept an ota.
Click to expand...
Click to collapse
Can you explain this a bit better ? I would like to understand what i'm getting into !
flashallthetime said:
The only solution and this applies only if you want to remain on the stock ROM.
Download the retail firmware and only manually flash the boot.img, the 10 sparsechunks and the OEM.img.
Do not use rsdlite!!
This should boot your phone.
Click to expand...
Click to collapse
Could you,if possible, link to me to the respective article ? Do I need to Get the firmware for Nougat or does it depend on security patch as well?
Gotcha,No rsdlite !

porthumor said:
Yes,exactly.
Which Custom ROM do you think is the safest possible alternative?
Can you explain this a bit better ? I would like to understand what i'm getting into !
Could you,if possible, link to me to the respective article ? Do I need to Get the firmware for Nougat or does it depend on security patch as well?
Gotcha,No rsdlite !
Click to expand...
Click to collapse
I would install the aosp ROM as it is bare bones android.
As for bootloaders, when you receive an ota it flashes a new bootloader.
What some folks have done is because they feel like a new ota isn't working to their liking, they have downgraded their firmare, either by flashing the firmware package that can be downloaded. They flash the entire package including bootloader, what this does is set up a perfect hard brick scenerio for moto devices.
They accept an ota or for reasons that are beyond uderstanding, sideload the package and bam as soon as they restart there device it bricks their device due to the mismatched bootloaders.
You are unlocked and the easiest way to prevent hard bricks is to for go flashing firmware.
I'm running validus 7.1.2 on the original bootloader that was installed on MM.
---------- Post added at 07:19 PM ---------- Previous post was at 07:17 PM ----------
I'm attempting to build a stock flashable TWRP stock 7.1.1 ROM.
You may also flash any flashable TWRP stock 7 rom, either bye me or dedracks

flashallthetime said:
I would install the aosp ROM as it is bare bones android.
As for bootloaders, when you receive an ota it flashes a new bootloader.
What some folks have done is because they feel like a new ota isn't working to their liking, they have downgraded their firmare, either by flashing the firmware package that can be downloaded. They flash the entire package including bootloader, what this does is set up a perfect hard brick scenerio for moto devices.
They accept an ota or for reasons that are beyond uderstanding, sideload the package and bam as soon as they restart there device it bricks their device due to the mismatched bootloaders.
You are unlocked and the easiest way to prevent hard bricks is to for go flashing firmware.
I'm running validus 7.1.2 on the original bootloader that was installed on MM.
---------- Post added at 07:19 PM ---------- Previous post was at 07:17 PM ----------
I'm attempting to build a stock flashable TWRP stock 7.1.1 ROM.
You may also flash any flashable TWRP stock 7 rom, either bye me or dedracks
Click to expand...
Click to collapse
Is it fine if i go ahead with this and see if it works ?
I will try to flash a custom ROM if it doesn't.

porthumor said:
Is it fine if i go ahead with this and see if it works ?
I will try to flash a custom ROM if it doesn't.
Click to expand...
Click to collapse
That's fine and it's my ROM lol.
You may want to format your data but first try to flash the ROM and see if it boots.
That Chinese TWRP is a nasty thing

porthumor said:
How will flashing a new logo help me get out of boot loop ? AFAIK it only replaces the warning.
Click to expand...
Click to collapse
Bro are you sure you followed my instruction? In twrp menu click on reboot>bootloader
Then it will boot the device in bootloader mode. And in the bootloader menu click on "start" using the power button. Then it will boot your phone. Everytime you reboot your phone do the same step. If you want to get rid of that thing you need to flash official rom via rsd lite

Kap_Tutan said:
Bro are you sure you followed my instruction? In twrp menu click on reboot>bootloader
Then it will boot the device in bootloader mode. And in the bootloader menu click on "start" using the power button. Then it will boot your phone. Everytime you reboot your phone do the same step. If you want to get rid of that thing you need to flash official rom via rsd lite
Click to expand...
Click to collapse
Rsdlite sucks, never flash any firmware with resdlite unless you know which lines need to be removed from the text file that tells rsdlite what to flash.
manually flashing firmware is IMO much safer and all you need to flash is the boot.img all the spareschunks and oem.img

Kap_Tutan said:
Bro are you sure you followed my instruction? In twrp menu click on reboot>bootloader
Then it will boot the device in bootloader mode. And in the bootloader menu click on "start" using the power button. Then it will boot your phone. Everytime you reboot your phone do the same step. If you want to get rid of that thing you need to flash official rom via rsd lite
Click to expand...
Click to collapse
I did what you had asked me to ,unfortunately it doesn't work. I would be happy just being able to boot using the above method.
Thanks for the suggestion tho !
flashallthetime said:
That's fine and it's my ROM lol.
You may want to format your data but first try to flash the ROM and see if it boots.
That Chinese TWRP is a nasty thing
Click to expand...
Click to collapse
I'll try to get this done by tomorrow and see if it helps !

porthumor said:
I did what you had asked me to ,unfortunately it doesn't work. I would be happy just being able to boot using the above method.
Thanks for the suggestion tho !
I'll try to get this done by tomorrow and see if it helps !
Click to expand...
Click to collapse
Hopefully it does

flashallthetime said:
Rsdlite sucks, never flash any firmware with resdlite unless you know which lines need to be removed from the text file that tells rsdlite what to flash.
manually flashing firmware is IMO much safer and all you need to flash is the boot.img all the spareschunks and oem.img
Click to expand...
Click to collapse
When flashing the boot the sparsechunk and the oem then can i able to receive a OTA in my device? Or do i need to flash the recovery.img also?
Anyways thanks bro i learned again something from you

Kap_Tutan said:
When flashing the boot the sparsechunk and the oem then can i able to receive a OTA in my device? Or do i need to flash the recovery.img also?
Anyways thanks bro i learned again something from you
Click to expand...
Click to collapse
You also need to flash the recovery image as well

New update has arrived 11.0.325ST

Good news, global ROM receives New update today.
Lenovo Z6 Pro.

Ok, so what's new / improvements ?

benjieb said:
Ok, so what's new / improvements ?
Click to expand...
Click to collapse
I don't know, I reinstall the firmware and lose the package, now system update refuse to give me again OTA ;-;

benjieb said:
Ok, so what's new / improvements ?
Click to expand...
Click to collapse
I don't have any idea how to recover my update ota, lenovo is trolling me.

I don't understand what your issue is. But if you missed OTA, is will come again soon.
I think one way to help that is to clear cache of update app. Just google it.
While you are there, once the OTA is downloaded to your phone AND before actually upgrading, it would be good to copy the update file to your PC and share it with others who don't get the OTA.

benjieb said:
I don't understand what your issue is. But if you missed OTA, is will come again soon.
I think one way to help that is to clear cache of update app. Just google it.
While you are there, once the OTA is downloaded to your phone AND before actually upgrading, it would be good to copy the update file to your PC and share it with others who don't get the OTA.
Click to expand...
Click to collapse
I found the solution, I'll repost the fastboot link that alexeei provided.
The overall improvements I've been noticing:
Connection problems that sometimes occurred in my region, are no longer giving.
Battery I noticed is lasting about 45 minutes longer.
PT-BR was basically 100% implemented in every layout.
The 4G connection has been improved.
I also believe that they have made some changes in the kernel, because the way the cores are working, is different gives version 284, ie better, I'll find out if in Benchmark improved anything.
And the audio in dolby atmos, I'm feeling that the audio has improved, it's louder and clearer.
camera haven't tested yet
However this is it: D

Here the link
Thanks for @alexeei
https://androidfilehost.com/?fid=1899786940962594224

hehk1234 said:
Here the link
Thanks for @alexeei
https://androidfilehost.com/?fid=1899786940962594224
Click to expand...
Click to collapse
this fastboot requires open bootloader?

x-geo said:
this fastboot requires open bootloader?
Click to expand...
Click to collapse
yes

alexeei said:
yes
Click to expand...
Click to collapse
And i can close it again after install it?

x-geo said:
And i can close it again after install it?
Click to expand...
Click to collapse
No, it's not neccessary

ok, i'll install it after it charges... this version comes with the new 4D Utouch?

In first Thank's a lot for the file !!!!
But after the flash , my phone don't reboot, hopefully reflash Alexeei Twrp solve my problem, evrithing seem ok now.
More info when more tested the rom

@alexeei, the file you shared is full ROW rom?
If so, when flashing with TWRP over an older version of ROW, will it keep data and apps?
Thanks!

I flash over my 284st the alexeei fastboot rom, but with the fastboot .bat.
And i have keep all my app,data and setting.
But the phone don't work in first attempt, must reflash the twrp for fix boot.
Don't know if this problème is only for me or more general.
My config before flash. Rom 11.0.284st + twrp alexeei + magisk 19.3.
Now everything seem ok and perf is good, except aod still dont work.

benjieb said:
@alexeei, the file you shared is full ROW rom?
If so, when flashing with TWRP over an older version of ROW, will it keep data and apps?
Thanks!
Click to expand...
Click to collapse
yes
---------- Post added at 08:27 PM ---------- Previous post was at 08:24 PM ----------
wlcbtd said:
I flash over my 284st the alexeei fastboot rom, but with the fastboot .bat.
And i have keep all my app,data and setting.
But the phone don't work in first attempt, must reflash the twrp for fix boot.
Don't know if this problème is only for me or more general.
My config before flash. Rom 11.0.284st + twrp alexeei + magisk 19.3.
Now everything seem ok and perf is good, except aod still dont work.
Click to expand...
Click to collapse
You only need flash vbmeta with --disable-verity option, i make it default in installer script in future releases.

Ok , thank's for the info !

How can I install this update?

Brillant !
Do you think it can be flashed over CN rom and keep data and apps?
Also, do you know where to find same type of rom file with latest CN rom?
I want to try latest ROW, but I know I will revert back to CN.

ManCast said:
How can I install this update?
Click to expand...
Click to collapse
See post #30 on these tread
https://forum.xda-developers.com/android/help/rom-lenovo-z6-pro-l78051-qpst-edl-t3947149
, same thing for these update.
But only if you already are in raw rom, update from chinese is untested by now.