Hello, it's possible to reset the phone in stock conditions (i don't care about the boot warning alert) and put stock recovery? Thanks
is your Phone rooted?
Have you delete Apps from System,data or Product Folder?
Which Version do you have L21?
letschky said:
is your Phone rooted?
Have you delete Apps from System,data or Product Folder?
Which Version do you have L21?
Click to expand...
Click to collapse
Yes my phone is rooted and I deleted bloatware apps. I have AL10
the boot warning alert is normal,you Bootloader is unlocked.
you can restore your firmware in eRecovery,this works only with AL10 Version and is very easy.
Boot in eRecovery and Download your firmware and restore.
Reboot your Phone and when you see the Orange Font "Your device ist trustet.... press the Volume up for 3 sec. and it boot into eRecovery.
After installing the Firmware make the Phone automatic a Factory reset and you on Stockrom with root.
Another Variant is Install Huawei HiSuite and press system update,if no update is available you can go to the previous version,but you must have a installed Stockrecovery.
I have an Honor Note 8 AL10 and this works fine.
But first try the eRecovery
letschky said:
the boot warning alert is normal,you Bootloader is unlocked.
you can restore your firmware in eRecovery,this works only with AL10 Version and is very easy.
Boot in eRecovery and Download your firmware and restore.
Reboot your Phone and when you see the Orange Font "Your device ist trustet.... press the Volume up for 3 sec. and it boot into eRecovery.
After installing the Firmware make the Phone automatic a Factory reset and you on Stockrom with root.
Another Variant is Install Huawei HiSuite and press system update,if no update is available you can go to the previous version,but you must have a installed Stockrecovery.
I have an Honor Note 8 AL10 and this works fine.
But first try the eRecovery
Click to expand...
Click to collapse
Thank you very much! the first variant works even if i have twrp installed?
LorenzoAbi said:
Thank you very much! the first variant works even if i have twrp installed?
Click to expand...
Click to collapse
Yes,it will work with Twrp installed.The Procedure install your Phone completly to Stock.
---------- Post added at 02:57 AM ---------- Previous post was at 02:46 AM ----------
Can you Backup your oeminfo from AL10 and upload it before you make this Procedure please
http://www.syncios.com/android-backup/backup-and-restore-huawei-honor-7x.html
bdxoul said:
http://www.syncios.com/android-backup/backup-and-restore-huawei-honor-7x.html
Click to expand...
Click to collapse
The link is spam!!??
SVR said:
The link is spam!!??
Click to expand...
Click to collapse
Go and check then say It's spam or not
bdxoul said:
Go and check then say It's spam or not
Click to expand...
Click to collapse
It's 100% spam. Just read the specs ... Android v5.1 (Lollipop), 5.5' screen, wrong display resolution etc. . It's all rubbish.
erecpvery doesn't work on the l24 since they don't offer the firmwares yet. SUCKS!
lowspeed said:
erecpvery doesn't work on the l24 since they don't offer the firmwares yet. SUCKS!
Click to expand...
Click to collapse
eRecovery restore works only with AL10 Version
letschky said:
eRecovery restore works only with AL10 Version
Click to expand...
Click to collapse
That's really sucky.
lowspeed said:
That's really sucky.
Click to expand...
Click to collapse
Yes i know
so the L24 is sol, huh? I have twrp and would like to go back to stock recovery.
Any news on when we'll see an update via erecovery for the BND-L24??!!
JDBarlow said:
Any news on when we'll see an update via erecovery for the BND-L24??!!
Click to expand...
Click to collapse
probably not going to happen. as Hawaiaiaiai is pulling out of the US market... (So I hear, i could be wrong)
lowspeed said:
probably not going to happen. as Hawaiaiaiai is pulling out of the US market... (So I hear, i could be wrong)
Click to expand...
Click to collapse
Man I sure hope you're wrong about that
Supposedly Oreo is dropping starting tomorrow. I'm guessing that'll only be OTA.
You don't think it'll be available via erecovery
What is ERecovery?
letschky said:
Yes i know
Click to expand...
Click to collapse
Sorry for the very stupid query. What is ERecovery?
I am aware of stock , TWRP or ClockWorkMod recovery. IS this a new one?
darkkid85 said:
Sorry for the very stupid query. What is ERecovery?
I am aware of stock , TWRP or ClockWorkMod recovery. IS this a new one?
Click to expand...
Click to collapse
Erecovery is the second Recovery,you can use to Restore the System to latest Version.
---------- Post added at 09:55 AM ---------- Previous post was at 09:13 AM ----------
Power off the Phone.
Press Volume Up and hold but the USB Cable from Pc in and let go when you see the Erecovery.
There is an Option to Restore the System via Wifi to latest Stock Rom Version.
But i think this works only on Chinese Phones,i have a Honor Note 8 and it works on it.But it is not sure, maybe it works with the newer devices too
Related
Hello guys, finally 6.0.1 update has been released via OTA on India for SM-G928G
First you need to flash 5.1.1 firmware, and then you can update via OTA to 6.0.1... so, let's get started.
# Install 5.1.1 firmware from India - G928G
Download: http://www.sammobile.com/firmwares/download/63263/G928GDDU2AOL1_G928GODD2AOL1_INS/
Mirror link: https://androidfilehost.com/?fid=24352994023704146
- Turn off your device and enter Download mode
- Connect via USB your device to your computer
- Open Odin3 v3.10.7
- Click on AP and select .tar.md5 file (it should look like -->THIS)
- Click on Start button and wait
- Reboot (may took a while to boot)
- Then you need to go to Settings > About device > Update software and update to 6.0.1
(Factory data reset after update via OTA is highly recommended.)
Click to expand...
Click to collapse
# How can i root it running 6.0.1?
(This will AVOID you warranty, so do it at your own risk.)
Download: https://dl.twrp.me/nobleltezt/twrp-3.0.0-0-nobleltezt.img.tar.html
Download: https://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
- Download BETA-SuperSU-v2.68.zip and copy it to your phone
- Turn off your device and enter Download mode
- Open Odin3 v3.10.7
- Click on AP and select twrp-3.0.0-0-nobleltezt.img.tar
- Uncheck Auto-Reboot and click start button
- When Odin shows PASS you need to disconnect your device and reboot it manually (volume down + power button)
- After reboot it manually, you need to quickly press volume up, home and power button to enter recovery mode
- Allow permissions to write on system, and go to install and select BETA-SuperSU-v2.68.zip
- Reboot
(That TWRP 3.0 it's from Note 5, but it's working great, Edge+ version of TWRP stuck at boot logo)
Proof: HERE
Click to expand...
Click to collapse
# How i can install Xposed?
(First, you need to root your phone.)
Download: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Download: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
- Download xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211.zip and copy it to your phone
- Turn off your device and enter recovery mode (volume up + home button + power button)
- Go to install and select xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211.zip
- Reboot (boot may took 5min at first boot)
- Install Xposed apk
- Enjoy
Proof: HERE
Click to expand...
Click to collapse
# How can i debloat it?
(First, you need to root your phone.)
Download: https://www.dropbox.com/s/mgay1ngqokft8ab/Orgia%20debloater%20v1.0.zip?dl=0
- Download Orgia debloater v1.0.zip and copy it to your phone
- Turn off your device and enter recovery mode (volume up + home button + power button)
- Go to install and select Orgia debloater v1.0.zip
- Reboot
It will look like --> THIS
Click to expand...
Click to collapse
- Thanks to @Dees_Troy for TWRP
- Thanks to @wanam for Xposed
- Thanks to @Chainfire for SuperSU
- Thanks to @kossiewossie for Orgia Debloater
- Thanks to Tsar3000 for mirror link of the firmware
Mirror link here:
https://androidfilehost.com/?fid=24352994023704146
Work perfectly
rickyevolution said:
Work perfectly
Click to expand...
Click to collapse
did u make a factory reset to get OTA update.... because i cant get it
sarampawilo said:
did u make a factory reset to get OTA update.... because i cant get it
Click to expand...
Click to collapse
Same here... I live in Uruguay and closely follow all the tutorial and always have the message that my device is up to date and that I havent got updates.
Do we have to factory reset the device?
Thanks in advance and sorry my bad english
---------- Post added at 02:22 PM ---------- Previous post was at 01:39 PM ----------
I tryed to remove the sim card and connect to wifi and nothing comes... Later I´ll try to factory reset to try to get the update....
romix_uy said:
Same here... I live in Uruguay and closely follow all the tutorial and always have the message that my device is up to date and that I havent got updates.
Do we have to factory reset the device?
Thanks in advance and sorry my bad english
---------- Post added at 02:22 PM ---------- Previous post was at 01:39 PM ----------
I tryed to remove the sim card and connect to wifi and nothing comes... Later I´ll try to factory reset to try to get the update....
Click to expand...
Click to collapse
Yes, you need to factory reset your device after flash 5.1.1 firmware from India.
Did not work for me... Still get no OTA after the procedure. I'm in Brazil . I'll factory reset right now.
briann_cs said:
Yes, you need to factory reset your device after flash 5.1.1 firmware from India.
Click to expand...
Click to collapse
Thanks! Downloading update!
Can you tell me if the update have only english language. I need spanish language...
Thanks again....
romix_uy said:
Thanks! Downloading update!
Can you tell me if the update have only english language. I need spanish language...
Thanks again....
Click to expand...
Click to collapse
You can enable spanish language by using this app: https://play.google.com/store/apps/details?id=sightidea.com.setlocale
briann_cs said:
You can enable spanish language by using this app: https://play.google.com/store/apps/details?id=sightidea.com.setlocale
Click to expand...
Click to collapse
I can confirm that the factory reset make the magic and let you download the update... I will download the app and enable spanish language... Thanks a lot!! :highfive:
---------- Post added at 10:03 PM ---------- Previous post was at 09:19 PM ----------
Hi again... I installed the program https://play.google.com/store/apps/details?id=sightidea.com.setlocale
I run a command in adb for grant permissions to change locale (no root), but the change is partial. I have parts of system and programs in spanish and parts in english.... Is that correct? can I make the whole
system to spanish or is not possible...
Thanks again in advance
---------- Post added at 10:51 PM ---------- Previous post was at 10:03 PM ----------
Update: I root the phone and installed a app that needs root... After that spanish language appears...
Thanks a lot to all who help...
Can you pls provide bootloader and modem of g28g marshmallow
Sent from my SM-G928F using Tapatalk
sagarb said:
Can you pls provide bootloader and modem of g28g marshmallow
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
I'm not on ubuntu, so i can't create a Odin package of modem and bootloader.
briann_cs said:
You can enable spanish language by using this app: https://play.google.com/store/apps/details?id=sightidea.com.setlocale
Click to expand...
Click to collapse
Can this app be ussed on any device (galaxy s6 flat) ???
romix_uy said:
I can confirm that the factory reset make the magic and let you download the update... I will download the app and enable spanish language... Thanks a lot!! :highfive:
Hi again... I installed the program https://play.google.com/store/apps/details?id=sightidea.com.setlocale
I run a command in adb for grant permissions to change locale (no root), but the change is partial. I have parts of system and programs in spanish and parts in english.... Is that correct? can I make the whole
system to spanish or is not possible...
Thanks again in advance
Update: I root the phone and installed a app that needs root... After that spanish language appears...
Thanks a lot to all who help...
Click to expand...
Click to collapse
Can u put the link to do the root please ???
---------- Post added at 07:54 AM ---------- Previous post was at 07:50 AM ----------
romix_uy said:
Same here... I live in Uruguay and closely follow all the tutorial and always have the message that my device is up to date and that I havent got updates.
Do we have to factory reset the device?
Thanks in advance and sorry my bad english
---------- Post added at 02:22 PM ---------- Previous post was at 01:39 PM ----------
I tryed to remove the sim card and connect to wifi and nothing comes... Later I´ll try to factory reset to try to get the update....
Click to expand...
Click to collapse
i make the factory restore, get the update but like u can set spanish on my phone.
I´ll use it untill the update to At&t MX came out to light
Finally downloading the official marshmallow update OTA
briann_cs said:
I'm not on ubuntu, so i can't create a Odin package of modem and bootloader.
Click to expand...
Click to collapse
sagarb said:
Can you pls provide bootloader and modem of g28g marshmallow
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Of course I can... Tell me how to do it
---------- Post added at 03:37 PM ---------- Previous post was at 03:34 PM ----------
sarampawilo said:
Can this app be ussed on any device (galaxy s6 flat) ???
I dont know
Can u put the link to do the root please ???
The guide is in the first page of that post
---------- Post added at 07:54 AM ---------- Previous post was at 07:50 AM ----------
i make the factory restore, get the update but like u can set spanish on my phone.
I´ll use it untill the update to At&t MX came out to light
Click to expand...
Click to collapse
If you root it works flawless
Hello, Iam the owner of a Verizon (USA ) Samsung S6 Edge Plus...
Model Number: SM-G928V
Android Version: 5.1.1
Base Band: G928VVRU2AOJ2
Click to expand...
Click to collapse
my question its:
1.-to get the Android 6.0.1 Marshmallow on this post, do I need to install the 5.1.1 firmware from India - G928G .... because my cell its a SM-G928V and Android version 5.1.1 , so can I install the G928G on a G928V ?
2.-If you say... "yes, you need to install the firmware version from India" then, Its not problem with my phone? alls works fine after install this firmware ?
3.-If I can install this version 5.1.1 from India, its able to install the update , because Iam using the phone In Mexico, with a sim Mexican sim Card, and of course via "OTA" I cant install any update.....
4.-of course my language its Spanish, so I read I need to root the phone to install this language after update to Marshnmallow, what happen if I don't want to root the phone , the Spanish language its available after update to 6.01 ?
thanks for all, and I hope my bad English can understand here....
fabiooli said:
Did not work for me... Still get no OTA after the procedure. I'm in Brazil . I'll factory reset right now.
Click to expand...
Click to collapse
Same here. Doing the factory reset right now. Will post if OTA showing up after that.
------
Worked like a CHARM.... after factory reset, click on Update and OTA for Marshmallow showing up. When it's over, I will perform another factory reset and do the root for Spanish method. THANKS SO MUCH!!!
Had big problems when installing TWRP recovery.
I downloaded and installed the india firmware and updated to MM through OTA. Everything went fine. After that i went ahead and installed TWRP. After reboot the phone went into a bootloop. Only thing that was working was the recovery. Since there is no odin flashable MM firmware for the G928G, i thought that i was stuck for a while. Since the recovery worked i went ahead and installed the Audax 1.3 rom. So Audax saved me. Hope this helps someone who might get into the same trouble as me. I also had to install the Skyhigh kernel for MM, since my phone never goes into deepsleep anymore on stock kernel. Does anyone know why this happens btw? I can't ever go back to stock again probably. That sucks when i decide to sell the phone.
gregges said:
Had big problems when installing TWRP recovery.
I downloaded and installed the india firmware and updated to MM through OTA. Everything went fine. After that i went ahead and installed TWRP. After reboot the phone went into a bootloop. Only thing that was working was the recovery. Since there is no odin flashable MM firmware for the G928G, i thought that i was stuck for a while. Since the recovery worked i went ahead and installed the Audax 1.3 rom. So Audax saved me. Hope this helps someone who might get into the same trouble as me. I also had to install the Skyhigh kernel for MM, since my phone never goes into deepsleep anymore on stock kernel. Does anyone know why this happens btw? I can't ever go back to stock again probably. That sucks when i decide to sell the phone.
Click to expand...
Click to collapse
Samsung has become more strict. Therefore when you root the phone gives problem. Most people and if I'm not mistaken everyone who root the edge+ have the same problem after rooting.
Kuganeswaraan said:
Samsung has become more strict. Therefore when you root the phone gives problem. Most people and if I'm not mistaken everyone who root the edge+ have the same problem after rooting.
Click to expand...
Click to collapse
In my g928g worked flawless... I just used the guide in the first page of that post
Hi there, I'm using Hong Kong version of htc10, i tried to root it but when i flashed supersu and xposed arm64 sdk23, it comes to stuck in the system ui interface showing that: 'System UI has stopped unexpectedly....etc.' Looping in that point. So i tried wipe all data in twrp mode and reboot again, still the same situation. Then I download a TW version of stock IMG which is 1.30.708.1(Original was 1.53.708.4) and flashed it in download mode, after that i rebooted it, everything is normal again. Fresh new welcome screen.
But there are some features that i can't use such as can't receive 4G+ signal, can't receive VoLTE, even could't use battery saving mode ....etc.
So I just want to know where can I find the STOCK IMG for my HK version CID HTC__622, which is 1.53.708.4 or so called RUU for it? Thanks.:crying::crying:
axx134679 said:
Hi there, I'm using Hong Kong version of htc10, i tried to root it but when i flashed supersu and xposed arm64 sdk23, it comes to stuck in the system ui interface showing that: 'System UI has stopped unexpectedly....etc.' Looping in that point. So i tried wipe all data in twrp mode and reboot again, still the same situation. Then I download a TW version of stock IMG which is 1.30.708.1(Original was 1.53.708.4) and flashed it in download mode, after that i rebooted it, everything is normal again. Fresh new welcome screen.
But there are some features that i can't use such as can't receive 4G+ signal, can't receive VoLTE, even could't use battery saving mode ....etc.
So I just want to know where can I find the STOCK IMG for my HK version CID HTC__622, which is 1.53.708.4 or so called RUU for it? Thanks.:crying::crying:
Click to expand...
Click to collapse
I'm looking for the HK stock img as well, I've only found one which seems to have been modified so OTA no longer work. Did you have any luck?
electric0ant said:
I'm looking for the HK stock img as well, I've only found one which seems to have been modified so OTA no longer work. Did you have any luck?
Click to expand...
Click to collapse
No luck??
axx134679 said:
No luck??
Click to expand...
Click to collapse
Should be in here. www.androidfilehost.com/?w=files&flid=74636
axx134679 said:
No luck����
Click to expand...
Click to collapse
I've found a twrp backup posted from someone else:
http://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297/post67760253#post67760253
the working link for the download is on the next page.
this is definitely the HK rom as after a wipe the default language is HK Chinese.
only problem is OTA does not work and when trying to manually flash the OTA manually (using TWRP and stock recovery) the check on the OTA zip passes but the system check fails so it looks like system has been modified.
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
purple patch said:
Should be in here. www.androidfilehost.com/?w=files&flid=74636
Click to expand...
Click to collapse
OMG there is a HK 1.21.708.4 ROM! if its stock then should be abel to update all the way to 1.80.708.6!
downloading now! if this works I am going to be over the moon!
just one question, what do I use to restore the zip? flash with twrp?
electric0ant said:
I've found a twrp backup posted from someone else:
http://forum.xda-developers.com/htc...ry-ruu-ota-t3359297/post67760253#post67760253
the working link for the download is on the next page.
this is definitely the HK rom as after a wipe the default language is HK Chinese.
only problem is OTA does not work and when trying to manually flash the OTA manually (using TWRP and stock recovery) the check on the OTA zip passes but the system check fails so it looks like system has been modified.
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
OMG there is a HK 1.21.708.4 ROM! if its stock then should be abel to update all the way to 1.80.708.6!
downloading now! if this works I am going to be over the moon!
just one question, what do I use to restore the zip? flash with twrp?
Click to expand...
Click to collapse
Rename zip file to 2PS6IMG.zip. Place on sdcard. Reboot to download mode and follow instructions. Do full backup before (SD and internal).
purple patch said:
Rename zip file to 2PS6IMG.zip. Place on sdcard. Reboot to download mode and follow instructions. Do full backup before (SD and internal).
Click to expand...
Click to collapse
if i boot to download mode isn't just the page with some options and also the mode to run fastboot commands to?
electric0ant said:
if i boot to download mode isn't just the page with some options and also the mode to run fastboot commands to?
Click to expand...
Click to collapse
Once that file is in correct spot, you will see option to flash it (VOLUp to flash). Been a while since I flashed stock img. Check guide section if you want to confirm.
purple patch said:
Once that file is in correct spot, you will see option to flash it (VOLUp to flash). Been a while since I flashed stock img. Check guide section if you want to confirm.
Click to expand...
Click to collapse
thanks for your help!
purple patch said:
Once that file is in correct spot, you will see option to flash it (VOLUp to flash). Been a while since I flashed stock img. Check guide section if you want to confirm.
Click to expand...
Click to collapse
just wanted to thank you again,
I'm totally stock now with working OTAs!!
electric0ant said:
just wanted to thank you again,
I'm totally stock now with working OTAs!!
Click to expand...
Click to collapse
Awesome, no problem, happy to point you in the right direction.
electric0ant said:
just wanted to thank you again,
I'm totally stock now with working OTAs!!
Click to expand...
Click to collapse
Please help the Hong kong community by backing up the system image and boot for 1.80.708.6 . I already provided the stock recovery file. It shouldn't take too long.
pro nexus said:
Please help the Hong kong community by backing up the system image and boot for 1.80.708.6 . I already provided the stock recovery file. It shouldn't take too long.
Click to expand...
Click to collapse
I would love to help but I've already sold the HTC 10 on already.
But with the RUU linked by purple patch you can get to stock completely. And it's so easy!
electric0ant said:
just wanted to thank you again,
I'm totally stock now with working OTAs!!
Click to expand...
Click to collapse
OMG, how the hell did i miss such important thing!!! I will try it right away! Thank you!!VERY MUCH!!!!
Sorry to bother you again, I put the 2PS6IMG in the external card, but it show an error message:" FAIL19 RU_MAIN_VER_FAIL os-version in android-info missing."
Maybe the IMG version that i downloaded us higher than my phone currently running? I'm running 1.53.XXX now.
Well, nevermind, I S-OFFed my htc10 and flashed the zip, now I'm using stock firmware and able to receive OTA, Thanks a lot man! You are my HERO!!
I encounter the same situation and like to return to Stock ROM, but my firmware version is 1.92.708.3. Searched over Internet and can't find the corresponded RUU. Anyone have it and can share to me?
antonyyip said:
I encounter the same situation and like to return to Stock ROM, but my firmware version is 1.92.708.3. Searched over Internet and can't find the corresponded RUU. Anyone have it and can share to me?
Click to expand...
Click to collapse
you don't need the same version of RUU, just flash the old version. I always flash the 1.53 RUU
DummyPLUG said:
you don't need the same version of RUU, just flash the old version. I always flash the 1.53 RUU
Click to expand...
Click to collapse
but I'm still S-ON, not yet purchased Sunshine:crying:
antonyyip said:
but I'm still S-ON, not yet purchased Sunshine:crying:
Click to expand...
Click to collapse
I assume you had unlock it, then it may already lost the warrant(not sure for this in HK), so why not s-off it via htc?
Hi guys
I was trying to get TWRP on my ZE551ML (WW-2.20.40.198). In order to do that, I tried to unlock the bootloader using this guide. I don't believe it worked, though, because every time I tried to flash TWRP through Fastboot or the app, it failed.
So now, I don't have any recovery at all. If I go to the bootloader and select "RECOVERY MODE", the phone just restarts and goes to the same bootloader again. So I got neither the stock recovery, nor TWRP.
I did manage to root and install Xposed, though, both through adb. What worries me, though, is that if I mess up my phone somehow, I won't be able to flash stock firmware or a backup. I would actually prefer to have the stock recovery at this point.
What can I do? I need the stock recovery to flash the stock firmware, but I can't.
I've tried Asus Flashtool before, but it didn't work. I think maybe it's because I tried it on Windows 10, some users said it worked better with Windows 7.
Help would be greatly appreciated.
You fastboot flash stock recovery for .198 in bootloader state.
timbernot said:
You fastboot flash stock recovery for .198 in bootloader state.
Click to expand...
Click to collapse
Where can I get the stock recovery?
http://forum.xda-developers.com/showthread.php?t=3096596
Sent from my Zenfone 2 using Tapatalk
https://mega.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw
kenbo111 said:
http://forum.xda-developers.com/showthread.php?t=3096596
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
Thanks, but I don't see .198 in the list, though?
timbernot said:
https://mega.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw
Click to expand...
Click to collapse
Thanks, but I don't see .198 in the list, though?
4.20 .40 .184 or above should be fine for 551
I cannot open the link here on this , is there recovery for 194 or 6 ? Too
timbernot said:
4.20 .40 .184 or above should be fine for 551
I cannot open the link here on this , is there recovery for 194 or 6 ? Too
Click to expand...
Click to collapse
What happens if it's not fine? Do I have anything to lose?
You will be ok as long it is 551 , 184 and above same .184I think was last full fw and others after were incremental otas after, smallish
timbernot said:
4.20 .40 .184 or above should be fine for 551
I cannot open the link here on this , is there recovery for 194 or 6 ? Too
Click to expand...
Click to collapse
Yeah, 196 is there, is that alright? I'm afraid of brickng the phone.
Yup
---------- Post added at 10:17 PM ---------- Previous post was at 10:11 PM ----------
FYI You can flash .184 or above and have MM.134 FW on internal sd and get notification to update after a reboot
timbernot said:
Yup
---------- Post added at 10:17 PM ---------- Previous post was at 10:11 PM ----------
FYI You can flash .184 or above and have MM.134 FW on internal sd and get notification to update after a reboot
Click to expand...
Click to collapse
I did it, used Fastboot to flash .196 recovery.img. I can now access the stock recovery again! Thank you guys so much for the help! This was a big deal to me, I had been feeling so uncomfortable without having access to the recovery! Thank you!! Will try restoring the stock firmware tomorrow.
Fiksdal said:
I did it, used Fastboot to flash .196 recovery.img. I can now access the stock recovery again! Thank you guys so much for the help! This was a big deal to me, I had been feeling so uncomfortable without having access to the recovery! Thank you!! Will try restoring the stock firmware tomorrow.
Click to expand...
Click to collapse
Cool! Nice job
Sent from my Zenfone 2 using Tapatalk
kenbo111 said:
Cool! Nice job
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
By the way, rather than flashing the .198 firmware again, I think it might be a good idea to flash "UL-Z00A-WW-2.20.40.196" from here since that will then correspond to the recovery file I flashed? Thoughts?
timbernot said:
You will be ok as long it is 551 , 184 and above same .184I think was last full fw and others after were incremental otas after, smallish
Click to expand...
Click to collapse
Should I now flash the 196 or the 198 firmware through adb? If I flash the 198, will it also restore 198 recovery? I've posted a new thread about it.
Already answered earlier at FYI above
.put MM 4-21.40.134 on internal sd and reboot
Have you not tried ?
No need for multiple threads
Ps , if don't get notification ,go to file manager and add .zip to the end so it looks like user.zip.zip save and reboot again
timbernot said:
Already answered earlier at FYI above
.put MM 4-21.40.134 on internal sd and reboot
Have you not tried ?
No need for multiple threads
Ps , if don't get notification ,go to file manager and add .zip to the end so it looks like user.zip.zip save and reboot again
Click to expand...
Click to collapse
Oh, sorry, I didn't notice it last time around, I was too excited about getting my recovery back
But what if I don't want Marshmallow, though? If I just want to stay on Lollipop? Do I just flash 198 and that's it?
timbernot said:
Already answered earlier at FYI above
.put MM 4-21.40.134 on internal sd and reboot
Have you not tried ?
No need for multiple threads
Ps , if don't get notification ,go to file manager and add .zip to the end so it looks like user.zip.zip save and reboot again
Click to expand...
Click to collapse
Actually, I flashed 196, and then I got 198 OTA the moment I booted . I guess that means I've got the 198 recovery too, now?
Yup , like mentioned previous , recovery will be the same from .184 lp
Hey guys. Today I tried rooting for the first time using this guide
In the third step of the article "3.Flashing TWRP and Rooting via TWRP" I pressed cancel when it asks for an encryption password(I hadn't put one yet). I also flashed the english TWRP( Recovery file) and not the one provided in the article . Now the phone just wont boot. Whenever I try to boot it, it gives me the error message:
"Your device has been unlocked and cannot be trusted.
ID: N/A"
And TWRP comes up everytime .
When i try booting from factory it shows:
"Your device has been unlocked and cannot be trusted.
ID: bad key"
and TWRP comes up.
The phone is still recognized in adb.I still haven't flashed SuperSU if that helps.
Should i Flash stock recovery and try again ?
Please send help, guys.
porthumor said:
Hey guys. Today I tried boot for the first time using this guide
In the third step of the article "3.Flashing TWRP and Rooting via TWRP" I pressed cancel when it asks for a password. I also flashed the english TWRP( Recovery file) and not the one provided in the article . Now the phone just wont boot. Whenever I try to boot it, it gives me the error message:
"Your device has been unlocked and cannot be trusted.
ID: N/A"
And TWRP comes up everytime .
When i try booting from factory it shows:
"Your device has been unlocked and cannot be trusted.
ID: bad key"
and TWRP comes up.
The phone is still recognized in adb.I still haven't flashed SuperSU if that helps.
Should i Flash stock recovery and try again ?
Please send help, guys.
Click to expand...
Click to collapse
I have similar problem like yours. The solution to boot your drvice. If your in twrp go to advance - reboot - bootloader. And in bootloader menu click start. And your phone now is booted
This is a alternative solution. But it wont damage your device. Trust me
Kap_Tutan said:
I have similar problem like yours. The solution to boot your drvice. If your in twrp go to advance - reboot - bootloader. And in bootloader menu click start. And your phone now is booted
This is a alternative solution. But it wont damage your device. Trust me
Click to expand...
Click to collapse
Tried this . It displays :
"Your device has been unlocked and cannot be trusted.
ID: bad key"
Reboots to show :
"Your device has been unlocked and cannot be trusted.
ID: N/A"
and goes into TWRP .
I think you need to flash new logo bin from here
https://forum.xda-developers.com/moto-z-play/themes/logo-bin-t3538153
mijing said:
I think you need to flash new logo bin from here
https://forum.xda-developers.com/moto-z-play/themes/logo-bin-t3538153
Click to expand...
Click to collapse
How will flashing a new logo help me get out of boot loop ? AFAIK it only replaces the warning.
porthumor said:
How will flashing a new logo help me get out of boot loop ? AFAIK it only replaces the warning.
Click to expand...
Click to collapse
I am not sure but
Yes
If showing "Your device has been unlocked and cannot be trusted"
I fix my device flashing new logo bin .
mijing said:
I am not sure but
Yes
If showing "Your device has been unlocked and cannot be trusted"
I fix my device flashing new logo bin .
Click to expand...
Click to collapse
Well thank you for the tip but that's not the problem here.The problem is that my phone never boots into OS ,it is stuck in recovery.Any Indication as to why would be a huge help !
porthumor said:
Well thank you for the tip but that's not the problem here.The problem is that my phone never boots into OS ,it is stuck in recovery.Any Indication as to why would be a huge help !
Click to expand...
Click to collapse
Are you sure OS is even there?
flashallthetime said:
Are you sure OS is even there?
Click to expand...
Click to collapse
I don't think I messed with the OS . I just unlocked the bootloader and flashed TWRP without flashing SuperSU.(done it for the first time for my Moto Z play). Used Wipe to clear davlik,cache and that's it.haven't done anything in the recovery since then.
The only thing i remember messing up was to not input the encryption key when it prompt me for it by clicking cancel.
I've read in some forums that it doesn't boot if it doesn't have SuperSU flashed,but I'm not sure if it's safe since i don't exactly know what might or might now permanently brick my phone.
Also some forums had something to do with patching the kernels (don't know if that's what you call it) but i don't know if it's a safe thing to do since it might also permanently brick my phone.
Running Nougat April Security Patch.
porthumor said:
I don't think I messed with the OS . I just unlocked the bootloader and flashed TWRP without flashing SuperSU.(done it for the first time for my Moto Z play). Used Wipe to clear davlik,cache and that's it.haven't done anything in the recovery since then.
The only thing i remember messing up was to not input the encryption key when it prompt me for it by clicking cancel.
I've read in some forums that it doesn't boot if it doesn't have SuperSU flashed,but I'm not sure if it's safe since i don't exactly know what might or might now permanently brick my phone.
Also some forums had something to do with patching the kernels (don't know if that's what you call it) but i don't know if it's a safe thing to do since it might also permanently brick my phone.
Running Nougat April Security Patch.
Click to expand...
Click to collapse
You used the Chinese TWRP originally? Now you have alberto97 TWRP? Is this correct?
I would flash a custom ROM, why I'm saying that is it's far safer flashing a zip ROM than trying to flash the stock firmware.
Again I will remind people the flashing bootloaders on moto devices will inevitably cause hard bricks if you downgrade and the accept an ota.
---------- Post added at 06:47 PM ---------- Previous post was at 06:39 PM ----------
The only solution and this applies only if you want to remain on the stock ROM.
Download the retail firmware and only manually flash the boot.img, the 10 sparsechunks and the OEM.img.
Do not use rsdlite!!
This should boot your phone.
flashallthetime said:
You used the Chinese TWRP originally? Now you have alberto97 TWRP? Is this correct?
Click to expand...
Click to collapse
Yes,exactly.
flashallthetime said:
I would flash a custom ROM, why I'm saying that is it's far safer flashing a zip ROM than trying to flash the stock firmware.
Click to expand...
Click to collapse
Which Custom ROM do you think is the safest possible alternative?
flashallthetime said:
Again I will remind people the flashing bootloaders on moto devices will inevitably cause hard bricks if you downgrade and the accept an ota.
Click to expand...
Click to collapse
Can you explain this a bit better ? I would like to understand what i'm getting into !
flashallthetime said:
The only solution and this applies only if you want to remain on the stock ROM.
Download the retail firmware and only manually flash the boot.img, the 10 sparsechunks and the OEM.img.
Do not use rsdlite!!
This should boot your phone.
Click to expand...
Click to collapse
Could you,if possible, link to me to the respective article ? Do I need to Get the firmware for Nougat or does it depend on security patch as well?
Gotcha,No rsdlite !
porthumor said:
Yes,exactly.
Which Custom ROM do you think is the safest possible alternative?
Can you explain this a bit better ? I would like to understand what i'm getting into !
Could you,if possible, link to me to the respective article ? Do I need to Get the firmware for Nougat or does it depend on security patch as well?
Gotcha,No rsdlite !
Click to expand...
Click to collapse
I would install the aosp ROM as it is bare bones android.
As for bootloaders, when you receive an ota it flashes a new bootloader.
What some folks have done is because they feel like a new ota isn't working to their liking, they have downgraded their firmare, either by flashing the firmware package that can be downloaded. They flash the entire package including bootloader, what this does is set up a perfect hard brick scenerio for moto devices.
They accept an ota or for reasons that are beyond uderstanding, sideload the package and bam as soon as they restart there device it bricks their device due to the mismatched bootloaders.
You are unlocked and the easiest way to prevent hard bricks is to for go flashing firmware.
I'm running validus 7.1.2 on the original bootloader that was installed on MM.
---------- Post added at 07:19 PM ---------- Previous post was at 07:17 PM ----------
I'm attempting to build a stock flashable TWRP stock 7.1.1 ROM.
You may also flash any flashable TWRP stock 7 rom, either bye me or dedracks
flashallthetime said:
I would install the aosp ROM as it is bare bones android.
As for bootloaders, when you receive an ota it flashes a new bootloader.
What some folks have done is because they feel like a new ota isn't working to their liking, they have downgraded their firmare, either by flashing the firmware package that can be downloaded. They flash the entire package including bootloader, what this does is set up a perfect hard brick scenerio for moto devices.
They accept an ota or for reasons that are beyond uderstanding, sideload the package and bam as soon as they restart there device it bricks their device due to the mismatched bootloaders.
You are unlocked and the easiest way to prevent hard bricks is to for go flashing firmware.
I'm running validus 7.1.2 on the original bootloader that was installed on MM.
---------- Post added at 07:19 PM ---------- Previous post was at 07:17 PM ----------
I'm attempting to build a stock flashable TWRP stock 7.1.1 ROM.
You may also flash any flashable TWRP stock 7 rom, either bye me or dedracks
Click to expand...
Click to collapse
Is it fine if i go ahead with this and see if it works ?
I will try to flash a custom ROM if it doesn't.
porthumor said:
Is it fine if i go ahead with this and see if it works ?
I will try to flash a custom ROM if it doesn't.
Click to expand...
Click to collapse
That's fine and it's my ROM lol.
You may want to format your data but first try to flash the ROM and see if it boots.
That Chinese TWRP is a nasty thing
porthumor said:
How will flashing a new logo help me get out of boot loop ? AFAIK it only replaces the warning.
Click to expand...
Click to collapse
Bro are you sure you followed my instruction? In twrp menu click on reboot>bootloader
Then it will boot the device in bootloader mode. And in the bootloader menu click on "start" using the power button. Then it will boot your phone. Everytime you reboot your phone do the same step. If you want to get rid of that thing you need to flash official rom via rsd lite
Kap_Tutan said:
Bro are you sure you followed my instruction? In twrp menu click on reboot>bootloader
Then it will boot the device in bootloader mode. And in the bootloader menu click on "start" using the power button. Then it will boot your phone. Everytime you reboot your phone do the same step. If you want to get rid of that thing you need to flash official rom via rsd lite
Click to expand...
Click to collapse
Rsdlite sucks, never flash any firmware with resdlite unless you know which lines need to be removed from the text file that tells rsdlite what to flash.
manually flashing firmware is IMO much safer and all you need to flash is the boot.img all the spareschunks and oem.img
Kap_Tutan said:
Bro are you sure you followed my instruction? In twrp menu click on reboot>bootloader
Then it will boot the device in bootloader mode. And in the bootloader menu click on "start" using the power button. Then it will boot your phone. Everytime you reboot your phone do the same step. If you want to get rid of that thing you need to flash official rom via rsd lite
Click to expand...
Click to collapse
I did what you had asked me to ,unfortunately it doesn't work. I would be happy just being able to boot using the above method.
Thanks for the suggestion tho !
flashallthetime said:
That's fine and it's my ROM lol.
You may want to format your data but first try to flash the ROM and see if it boots.
That Chinese TWRP is a nasty thing
Click to expand...
Click to collapse
I'll try to get this done by tomorrow and see if it helps !
porthumor said:
I did what you had asked me to ,unfortunately it doesn't work. I would be happy just being able to boot using the above method.
Thanks for the suggestion tho !
I'll try to get this done by tomorrow and see if it helps !
Click to expand...
Click to collapse
Hopefully it does
flashallthetime said:
Rsdlite sucks, never flash any firmware with resdlite unless you know which lines need to be removed from the text file that tells rsdlite what to flash.
manually flashing firmware is IMO much safer and all you need to flash is the boot.img all the spareschunks and oem.img
Click to expand...
Click to collapse
When flashing the boot the sparsechunk and the oem then can i able to receive a OTA in my device? Or do i need to flash the recovery.img also?
Anyways thanks bro i learned again something from you
Kap_Tutan said:
When flashing the boot the sparsechunk and the oem then can i able to receive a OTA in my device? Or do i need to flash the recovery.img also?
Anyways thanks bro i learned again something from you
Click to expand...
Click to collapse
You also need to flash the recovery image as well
Hi,
I had rooted my phone (ANE-AL00 C675) long back. Now there is a yellowing of screen, so I want to take it to the customer centre. For this, I want to relock the bootloader. However, when I relock, it goes to bootloop. When I unlock it again, it is working
[1] I rooted using the method from here - https://forum.xda-developers.com/hu...t-p20-lite-t3773923/post76137173#post76137173. I've flashed the original ramdisk before relocking.
[2] I had flashed twrp. I flashed stock recovery before relocking from here - https://forum.xda-developers.com/huawei-p20-lite/help/req-stock-recovery-p20-lite-t3803027
[3] I had installed xposed. Uninstalled using the option within xposed.
What am I doing wrong? Please help me relock the phone. TIA.
Arseon said:
Hi,
I had rooted my phone (ANE-AL00) long back. Now there is a yellowing of screen, so I want to take it to the customer centre. For this, I want to relock the bootloader. However, when I relock, it goes to bootloop. When I unlock it again, it is working
[1] I rooted using the method from here - https://forum.xda-developers.com/hu...t-p20-lite-t3773923/post76137173#post76137173. I've flashed the original ramdisk before relocking.
[2] I had flashed twrp. I flashed stock recovery before relocking from here - https://forum.xda-developers.com/huawei-p20-lite/help/req-stock-recovery-p20-lite-t3803027
[3] I had installed xposed. Uninstalled using the option within xposed.
What am I doing wrong? Please help me relock the phone. TIA.
Click to expand...
Click to collapse
Is your CUST = C807 ?
kilroystyx said:
Is your CUST = C807 ?
Click to expand...
Click to collapse
Forgot to mention that. CUST is C675, Indian version
Arseon said:
Forgot to mention that. CUST is C675, Indian version
Click to expand...
Click to collapse
For your location I see none Firmware that lock (not relock) automatically your bootloader.
I searched ANNE-AL00 in the site https://androidhost.ru/search.html
Arseon said:
Forgot to mention that. CUST is C675, Indian version
Click to expand...
Click to collapse
Your model is ANE-AL00 or ANE-AL00I ?
kilroystyx said:
Your model is ANE-AL00 or ANE-AL00I ?
Click to expand...
Click to collapse
ANE-AL00
Arseon said:
ANE-AL00
Click to expand...
Click to collapse
If you install again stock firmware the device will be in the correct status to re-lock the bootloader.
Check in this link if the firmware is familiar for you :
https://pro-teammt.ru/firmware-database/?firmware_model=ANE-AL00C675&firmware_page=0
Use this tool for installation => https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
kilroystyx said:
If you install again stock firmware the device will be in the correct status to re-lock the bootloader.
Check in this link if the firmware is familiar for you :
https://pro-teammt.ru/firmware-database/?firmware_model=ANE-AL00C675&firmware_page=0
Use this tool for installation => https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Hi, I did go through the list but 8.0.0.131 is not available. Is there any way to relock without the stock rom? I've been unable to find 8.0.0.131 rom on the internet.
Guys, any help on this is appreciated.
Arseon said:
Guys, any help on this is appreciated.
Click to expand...
Click to collapse
Hi there
I've read the confusion Altough I must ask, why do you need that specific version 8.0.0.131?
If you just wanna get a "lock" state not a "relock" state to get the warranty back, then flash any dload package available, if the phone is Indian then this is what you are looking for:
https://androidhost.ru/KY
If you don't know the dload procedure just quote me or DM me.
Cheers,
AS
ars_chelsea said:
Hi there
I've read the confusion Altough I must ask, why do you need that specific version 8.0.0.131?
If you just wanna get a "lock" state not a "relock" state to get the warranty back, then flash any dload package available, if the phone is Indian then this is what you are looking for:
https://androidhost.ru/KY
If you don't know the dload procedure just quote me or DM me.
Cheers,
AS
Click to expand...
Click to collapse
Hi ars_chelsea,
Can you double check the link posted by you?
I'm seeing wrong or that firmware is for P8 lite 2017.
Hi, I was under the impression that you need the stock rom version to relock bootloader. Please advice on how to proceed.
ars_chelsea said:
Hi there
I've read the confusion Altough I must ask, why do you need that specific version 8.0.0.131?
If you just wanna get a "lock" state not a "relock" state to get the warranty back, then flash any dload package available, if the phone is Indian then this is what you are looking for:
https://androidhost.ru/KY
If you don't know the dload procedure just quote me or DM me.
Cheers,
AS
Click to expand...
Click to collapse
kilroystyx said:
Hi ars_chelsea,
Can you double check the link posted by you?
I'm seeing wrong or that firmware is for P8 lite 2017.
Click to expand...
Click to collapse
You are right it's for P8 Lite 2017 (PRA-AL00), my bad on that :/
---------- Post added at 01:22 PM ---------- Previous post was at 01:18 PM ----------
Arseon said:
Hi, I was under the impression that you need the stock rom version to relock bootloader. Please advice on how to proceed.
Click to expand...
Click to collapse
Tell one thing though, can you access eRecovery?
If so, have you tried to restore it from there? It also downloads a signed full firmware which makes your bootloader on "lock" state.
Hi,
I can access eRecovery. But it fails at 99%.
ars_chelsea said:
You are right it's for P8 Lite 2017 (PRA-AL00), my bad on that :/
---------- Post added at 01:22 PM ---------- Previous post was at 01:18 PM ----------
Tell one thing though, can you access eRecovery?
If so, have you tried to restore it from there? It also downloads a signed full firmware which makes your bootloader on "lock" state.
Click to expand...
Click to collapse
Arseon said:
Hi,
I can access eRecovery. But it fails at 99%.
Click to expand...
Click to collapse
That is really weird... Tomorrow i'll show you some stuff you can do while I'm working.
I've sent you a DM with a 24H valid link to the correct dload package, please use it to restore your device.
ars_chelsea said:
I've sent you a DM with a 24H valid link to the correct dload package, please use it to restore your device.
Click to expand...
Click to collapse
Hi, it says link expired. Please share it again. Thanks for the help.
Arseon said:
Hi, it says link expired. Please share it again. Thanks for the help.
Click to expand...
Click to collapse
Ok, I've sent you another one, please check.
Ok my way the easy one- instead BL relock you will get locked
1 Install TWRP.
2 Download OEMINFO for your model any (dont use DD if your phone is SS sim) need image not zip - upload on sdcard
3From TWRP install oeminfo.
4Restart phone and go to Erecovery it should now start downloading right sys and bootloader will be like never touch.
Good luck
Hi, please share the link again. Was out of station in the last week.
ars_chelsea said:
Ok, I've sent you another one, please check.
Click to expand...
Click to collapse