Here's the official OTA link to update from LCA43 (Lollipop) to MEC24H (Marshmallow). Enjoy! You can only flash this on a watch that is completely stock! If you need to restore your watch, Sony PC Companion might work.
https://android.googleapis.com/pack...e2ee74fbab.signed-tetra-MEC24H-from-LCA43.zip
Small note: This OTA will update the bootloader to block "tethered booting" in fastboot while the bootloader is locked (so you will have to unlock the bootloader to use TWRP). If you want to keep the old bootloader, there is a post on the third page. This zip is signed by Sony, so you can flash it in stock recovery with a locked bootloader.
Edit: Here are some screenshots. Not much has changed compared to Lollipop, and Sony hasn't added anything compared to other watches, so they're not very interesting. https://imgur.com/a/Vp8hY (Ambient Mode might look worse on your watch because after I flashed Marshmallow I edited build.prop to disable low bit ambient mode. If you want to do this too, I made a crappy tutorial for that on reddit: https://www.reddit.com/r/AndroidWea...an_disable_low_bit_ambient_mode_to_make_your/)
Hi,
thanks for link. Could you give here some tutorial how to install this update ?
Must have unlock bootloader for this update ?
Thanks.
kalousek said:
Could you give here some tutorial how to install this update ?
Click to expand...
Click to collapse
Open up adb on a computer and plug in the watch. Issue adb reboot recovery and tap the watch screen when the recovery droid picture shows up. Swipe down to the sideload option then swipe right. Issue adb sideload blahblah.zip (obviously put the real zip name where "blahblah" is) and wait. After it finishes, swipe to the reboot option and swipe right to select. Your watch has been updated!
andrewia said:
Here's the official OTA link to update from LCA43 (Lollipop) to MEC24H (Marshmallow). Enjoy!
https://android.googleapis.com/pack...e2ee74fbab.signed-tetra-MEC24H-from-LCA43.zip
This OTA will update the bootloader to block "tethered booting" in fastboot with a locked bootloader. Unlocking the bootloader restores functionality. You can flash this zip in stock recovery with a locked bootloader.
Edit: Here are some screenshots. Not much has changed compared to Lollipop, and Sony hasn't added anything compared to other watches, so they're not very interesting. https://imgur.com/a/Vp8hY Ambient Mode might look worse on your watch because I edited build.prop to disable low bit ambient mode. I made a crappy tutorial for that on reddit: https://www.reddit.com/r/AndroidWea...an_disable_low_bit_ambient_mode_to_make_your/
Click to expand...
Click to collapse
so you have already disabled low bit mode??? and did you reup the zip after or was that done before you uploaded it?
andrewia said:
Open up adb on a computer and plug in the watch. Issue adb reboot recovery and tap the watch screen when the recovery droid picture shows up. Swipe down to the sideload option then swipe right. Issue adb sideload blahblah.zip (obviously put the real zip name where "blahblah" is) and wait. After it finishes, swipe to the reboot option and swipe right to select. Your watch has been updated!
Click to expand...
Click to collapse
Thanks for tutorial
lohtse said:
so you have already disabled low bit mode??? and did you reup the zip after or was that done before you uploaded it?
Click to expand...
Click to collapse
The zip is the stock zip on Google's servers. My mod is separate, I just mentioned it in case anyone was wondering why my card previews looked better than theirs.
andrewia said:
The zip is the stock zip on Google's servers. My mod is separate, I just mentioned it in case anyone was wondering why my card previews looked better than theirs.
Click to expand...
Click to collapse
anychance you can provide a revised zip with the mod??
Can Someone provide boot.img from MM update?
lohtse said:
anychance you can provide a revised zip with the mod??
Click to expand...
Click to collapse
No, because the mod is literally only adding a single character (#) to a line in build.prop. If I repacked it into a zip you would still have to boot TWRP and use adb to flash it, which is 90% of the work.
I'll try to pull the boot image tomorrow.
andrewia said:
I'll try to pull the boot image tomorrow.
Click to expand...
Click to collapse
Thanks. I want look at ramdisk. And recompile kernel for MM update...
anyone finding the UI really laggy since doing this update ?
I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?
pickles76 said:
I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?
Click to expand...
Click to collapse
mine was completely stock and i just followed instructions in this post and went fine
bigr1979 said:
mine was completely stock and i just followed instructions in this post and went fine
Click to expand...
Click to collapse
Yup, I've done this many times before on other devices but this one ends up with status 7 doing exactly as explained. Tried downloading the file a few times (im on OSX/Mac btw) and still the same results. Maybe should try on a windows-machine.
pickles76 said:
I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?
Click to expand...
Click to collapse
complete stock, locked bootloader and unrooted and no issues for me..
On that note what are the best ways to Unlock bootloader(will I loose data?), Flash twrp and then root?
---------- Post added at 11:49 AM ---------- Previous post was at 11:48 AM ----------
bigr1979 said:
anyone finding the UI really laggy since doing this update ?
Click to expand...
Click to collapse
Nope I actually find it snappier.... I have 30+ apps on as well
lohtse said:
complete stock, locked bootloader and unrooted and no issues for me..
On that note what are the best ways to Unlock bootloader(will I loose data?), Flash twrp and then root?
---------- Post added at 11:49 AM ---------- Previous post was at 11:48 AM ----------
Nope I actually find it snappier.... I have 30+ apps on as well
Click to expand...
Click to collapse
I used windows 10 64bit to flash mine.... Seems to be getting a bit snappier now that its calming down and have downloaded music onto etc cheers thanks OP for the update
andrewia said:
I'll try to pull the boot image tomorrow.
Click to expand...
Click to collapse
Never mind.
I've extracted boot.img.
Try to rebuild my kernel for MM.
Sent from my HTC One_M8 using XDA-Developers mobile app
pickles76 said:
I have a bone stock watch, locked bootloader etc. When trying to sideload I get status 7 error when trying to update. Any ideas?
Click to expand...
Click to collapse
Hello
I have the same problem. How do you solve it?
Thanks.
OK now I flashed the stock kernel of LCA43 before flashing the full rom
mickael91210 said:
Hello
I have the same problem. How do you solve it?
Thanks.
OK now I flashed the stock kernel of LCA43 before flashing the full rom
Click to expand...
Click to collapse
Could you explain more? Im still stuck..
Related
Hi there, I'm using Hong Kong version of htc10, i tried to root it but when i flashed supersu and xposed arm64 sdk23, it comes to stuck in the system ui interface showing that: 'System UI has stopped unexpectedly....etc.' Looping in that point. So i tried wipe all data in twrp mode and reboot again, still the same situation. Then I download a TW version of stock IMG which is 1.30.708.1(Original was 1.53.708.4) and flashed it in download mode, after that i rebooted it, everything is normal again. Fresh new welcome screen.
But there are some features that i can't use such as can't receive 4G+ signal, can't receive VoLTE, even could't use battery saving mode ....etc.
So I just want to know where can I find the STOCK IMG for my HK version CID HTC__622, which is 1.53.708.4 or so called RUU for it? Thanks.:crying::crying:
axx134679 said:
Hi there, I'm using Hong Kong version of htc10, i tried to root it but when i flashed supersu and xposed arm64 sdk23, it comes to stuck in the system ui interface showing that: 'System UI has stopped unexpectedly....etc.' Looping in that point. So i tried wipe all data in twrp mode and reboot again, still the same situation. Then I download a TW version of stock IMG which is 1.30.708.1(Original was 1.53.708.4) and flashed it in download mode, after that i rebooted it, everything is normal again. Fresh new welcome screen.
But there are some features that i can't use such as can't receive 4G+ signal, can't receive VoLTE, even could't use battery saving mode ....etc.
So I just want to know where can I find the STOCK IMG for my HK version CID HTC__622, which is 1.53.708.4 or so called RUU for it? Thanks.:crying::crying:
Click to expand...
Click to collapse
I'm looking for the HK stock img as well, I've only found one which seems to have been modified so OTA no longer work. Did you have any luck?
electric0ant said:
I'm looking for the HK stock img as well, I've only found one which seems to have been modified so OTA no longer work. Did you have any luck?
Click to expand...
Click to collapse
No luck??
axx134679 said:
No luck??
Click to expand...
Click to collapse
Should be in here. www.androidfilehost.com/?w=files&flid=74636
axx134679 said:
No luck����
Click to expand...
Click to collapse
I've found a twrp backup posted from someone else:
http://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297/post67760253#post67760253
the working link for the download is on the next page.
this is definitely the HK rom as after a wipe the default language is HK Chinese.
only problem is OTA does not work and when trying to manually flash the OTA manually (using TWRP and stock recovery) the check on the OTA zip passes but the system check fails so it looks like system has been modified.
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
purple patch said:
Should be in here. www.androidfilehost.com/?w=files&flid=74636
Click to expand...
Click to collapse
OMG there is a HK 1.21.708.4 ROM! if its stock then should be abel to update all the way to 1.80.708.6!
downloading now! if this works I am going to be over the moon!
just one question, what do I use to restore the zip? flash with twrp?
electric0ant said:
I've found a twrp backup posted from someone else:
http://forum.xda-developers.com/htc...ry-ruu-ota-t3359297/post67760253#post67760253
the working link for the download is on the next page.
this is definitely the HK rom as after a wipe the default language is HK Chinese.
only problem is OTA does not work and when trying to manually flash the OTA manually (using TWRP and stock recovery) the check on the OTA zip passes but the system check fails so it looks like system has been modified.
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
OMG there is a HK 1.21.708.4 ROM! if its stock then should be abel to update all the way to 1.80.708.6!
downloading now! if this works I am going to be over the moon!
just one question, what do I use to restore the zip? flash with twrp?
Click to expand...
Click to collapse
Rename zip file to 2PS6IMG.zip. Place on sdcard. Reboot to download mode and follow instructions. Do full backup before (SD and internal).
purple patch said:
Rename zip file to 2PS6IMG.zip. Place on sdcard. Reboot to download mode and follow instructions. Do full backup before (SD and internal).
Click to expand...
Click to collapse
if i boot to download mode isn't just the page with some options and also the mode to run fastboot commands to?
electric0ant said:
if i boot to download mode isn't just the page with some options and also the mode to run fastboot commands to?
Click to expand...
Click to collapse
Once that file is in correct spot, you will see option to flash it (VOLUp to flash). Been a while since I flashed stock img. Check guide section if you want to confirm.
purple patch said:
Once that file is in correct spot, you will see option to flash it (VOLUp to flash). Been a while since I flashed stock img. Check guide section if you want to confirm.
Click to expand...
Click to collapse
thanks for your help!
purple patch said:
Once that file is in correct spot, you will see option to flash it (VOLUp to flash). Been a while since I flashed stock img. Check guide section if you want to confirm.
Click to expand...
Click to collapse
just wanted to thank you again,
I'm totally stock now with working OTAs!!
electric0ant said:
just wanted to thank you again,
I'm totally stock now with working OTAs!!
Click to expand...
Click to collapse
Awesome, no problem, happy to point you in the right direction.
electric0ant said:
just wanted to thank you again,
I'm totally stock now with working OTAs!!
Click to expand...
Click to collapse
Please help the Hong kong community by backing up the system image and boot for 1.80.708.6 . I already provided the stock recovery file. It shouldn't take too long.
pro nexus said:
Please help the Hong kong community by backing up the system image and boot for 1.80.708.6 . I already provided the stock recovery file. It shouldn't take too long.
Click to expand...
Click to collapse
I would love to help but I've already sold the HTC 10 on already.
But with the RUU linked by purple patch you can get to stock completely. And it's so easy!
electric0ant said:
just wanted to thank you again,
I'm totally stock now with working OTAs!!
Click to expand...
Click to collapse
OMG, how the hell did i miss such important thing!!! I will try it right away! Thank you!!VERY MUCH!!!!
Sorry to bother you again, I put the 2PS6IMG in the external card, but it show an error message:" FAIL19 RU_MAIN_VER_FAIL os-version in android-info missing."
Maybe the IMG version that i downloaded us higher than my phone currently running? I'm running 1.53.XXX now.
Well, nevermind, I S-OFFed my htc10 and flashed the zip, now I'm using stock firmware and able to receive OTA, Thanks a lot man! You are my HERO!!
I encounter the same situation and like to return to Stock ROM, but my firmware version is 1.92.708.3. Searched over Internet and can't find the corresponded RUU. Anyone have it and can share to me?
antonyyip said:
I encounter the same situation and like to return to Stock ROM, but my firmware version is 1.92.708.3. Searched over Internet and can't find the corresponded RUU. Anyone have it and can share to me?
Click to expand...
Click to collapse
you don't need the same version of RUU, just flash the old version. I always flash the 1.53 RUU
DummyPLUG said:
you don't need the same version of RUU, just flash the old version. I always flash the 1.53 RUU
Click to expand...
Click to collapse
but I'm still S-ON, not yet purchased Sunshine:crying:
antonyyip said:
but I'm still S-ON, not yet purchased Sunshine:crying:
Click to expand...
Click to collapse
I assume you had unlock it, then it may already lost the warrant(not sure for this in HK), so why not s-off it via htc?
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
sandy108 said:
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
Click to expand...
Click to collapse
Is this ok to install on the US variants?
Sent from my iPhone using Tapatalk
From what I understand, I'm just supposed to download this and then go to my recovery and update from recovery right?
As in like update from internal storage right?
What version is this from?
hey bro did you have the flashligt icon and gesture in the new update?
Anyone flashed this with flash fire?
How to install on rooted devices???
sandy108 said:
I managed to capture the OTA link and get the file guys
https://drive.google.com/open?id=0B_as3y0lZtevWkR5NjgzU0h1cTQ
Click to expand...
Click to collapse
You didn't tell us what variant of the phone you have
How to install???
zimplemeh said:
Is this ok to install on the US variants?
Click to expand...
Click to collapse
No this is not recommended to install on US variant
saqlainrattansi said:
From what I understand, I'm just supposed to download this and then go to my recovery and update from recovery right?
As in like update from internal storage right?
Click to expand...
Click to collapse
Yes you got it right
olive23 said:
What version is this from?
Click to expand...
Click to collapse
It's from build number *67
Jayesh Nirve said:
How to install???
Click to expand...
Click to collapse
Either use stock recovery or use Flashfire
zeft64 said:
You didn't tell us what variant of the phone you have
Click to expand...
Click to collapse
Indian Variant
Flash fire ain't working phone just reboots with no changes
can i install on retbr?
I think the location version does not matter as long as you have the right build number. I had retla .15 and tried to flash .35 in order to update to .67 (fail), the ota ask for .14/.15. So I had to install stock .15 again and redo the process.
Something I'd like to add is the stock recovery did not recognize internal or sd storage, so I had to push ota via ADB.
*Also my warning bootscreen changed from N/A to Bad Key multiple times for apparently no reason. But everything is working fine.
Pls tell me how u went back to 15 plsss
Aredhelelen said:
I think the location version does not matter as long as you have the right build number. I had retla .15 and tried to flash .35 in order to update to .67 (fail), the ota ask for .14/.15. So I had to install stock .15 again and redo the process.
Something I'd like to add is the stock recovery did not recognize internal or sd storage, so I had to push ota via ADB.
*Also my warning bootscreen changed from N/A to Bad Key multiple times for apparently no reason. But everything is working fine.
Click to expand...
Click to collapse
Exactly what I have been trying to tell. There is a fingerprint mismatch that happens. On a side note how did you manage to take yourself back from .35 to .15 and then update to .67. I get the last part, but downgrading with a higher bootloader; and where did you get the .15 build
You can simply install one of the stock versions already posted here in the forum, I just downloaded the .15 and installed it again via fastboot with the command lines (also explained in that post, in comments) like any other stock rom. Then, after starting the phone you must activate USB debbuging mode to be able to use ADB commands, so you can restart the phone in stock recovery and activate the push ota update via ADB.
Anyway, if this sounds complicated I think there is already a flashable .zip to apply ota, you can give it a try.
Hey guys. Today I tried rooting for the first time using this guide
In the third step of the article "3.Flashing TWRP and Rooting via TWRP" I pressed cancel when it asks for an encryption password(I hadn't put one yet). I also flashed the english TWRP( Recovery file) and not the one provided in the article . Now the phone just wont boot. Whenever I try to boot it, it gives me the error message:
"Your device has been unlocked and cannot be trusted.
ID: N/A"
And TWRP comes up everytime .
When i try booting from factory it shows:
"Your device has been unlocked and cannot be trusted.
ID: bad key"
and TWRP comes up.
The phone is still recognized in adb.I still haven't flashed SuperSU if that helps.
Should i Flash stock recovery and try again ?
Please send help, guys.
porthumor said:
Hey guys. Today I tried boot for the first time using this guide
In the third step of the article "3.Flashing TWRP and Rooting via TWRP" I pressed cancel when it asks for a password. I also flashed the english TWRP( Recovery file) and not the one provided in the article . Now the phone just wont boot. Whenever I try to boot it, it gives me the error message:
"Your device has been unlocked and cannot be trusted.
ID: N/A"
And TWRP comes up everytime .
When i try booting from factory it shows:
"Your device has been unlocked and cannot be trusted.
ID: bad key"
and TWRP comes up.
The phone is still recognized in adb.I still haven't flashed SuperSU if that helps.
Should i Flash stock recovery and try again ?
Please send help, guys.
Click to expand...
Click to collapse
I have similar problem like yours. The solution to boot your drvice. If your in twrp go to advance - reboot - bootloader. And in bootloader menu click start. And your phone now is booted
This is a alternative solution. But it wont damage your device. Trust me
Kap_Tutan said:
I have similar problem like yours. The solution to boot your drvice. If your in twrp go to advance - reboot - bootloader. And in bootloader menu click start. And your phone now is booted
This is a alternative solution. But it wont damage your device. Trust me
Click to expand...
Click to collapse
Tried this . It displays :
"Your device has been unlocked and cannot be trusted.
ID: bad key"
Reboots to show :
"Your device has been unlocked and cannot be trusted.
ID: N/A"
and goes into TWRP .
I think you need to flash new logo bin from here
https://forum.xda-developers.com/moto-z-play/themes/logo-bin-t3538153
mijing said:
I think you need to flash new logo bin from here
https://forum.xda-developers.com/moto-z-play/themes/logo-bin-t3538153
Click to expand...
Click to collapse
How will flashing a new logo help me get out of boot loop ? AFAIK it only replaces the warning.
porthumor said:
How will flashing a new logo help me get out of boot loop ? AFAIK it only replaces the warning.
Click to expand...
Click to collapse
I am not sure but
Yes
If showing "Your device has been unlocked and cannot be trusted"
I fix my device flashing new logo bin .
mijing said:
I am not sure but
Yes
If showing "Your device has been unlocked and cannot be trusted"
I fix my device flashing new logo bin .
Click to expand...
Click to collapse
Well thank you for the tip but that's not the problem here.The problem is that my phone never boots into OS ,it is stuck in recovery.Any Indication as to why would be a huge help !
porthumor said:
Well thank you for the tip but that's not the problem here.The problem is that my phone never boots into OS ,it is stuck in recovery.Any Indication as to why would be a huge help !
Click to expand...
Click to collapse
Are you sure OS is even there?
flashallthetime said:
Are you sure OS is even there?
Click to expand...
Click to collapse
I don't think I messed with the OS . I just unlocked the bootloader and flashed TWRP without flashing SuperSU.(done it for the first time for my Moto Z play). Used Wipe to clear davlik,cache and that's it.haven't done anything in the recovery since then.
The only thing i remember messing up was to not input the encryption key when it prompt me for it by clicking cancel.
I've read in some forums that it doesn't boot if it doesn't have SuperSU flashed,but I'm not sure if it's safe since i don't exactly know what might or might now permanently brick my phone.
Also some forums had something to do with patching the kernels (don't know if that's what you call it) but i don't know if it's a safe thing to do since it might also permanently brick my phone.
Running Nougat April Security Patch.
porthumor said:
I don't think I messed with the OS . I just unlocked the bootloader and flashed TWRP without flashing SuperSU.(done it for the first time for my Moto Z play). Used Wipe to clear davlik,cache and that's it.haven't done anything in the recovery since then.
The only thing i remember messing up was to not input the encryption key when it prompt me for it by clicking cancel.
I've read in some forums that it doesn't boot if it doesn't have SuperSU flashed,but I'm not sure if it's safe since i don't exactly know what might or might now permanently brick my phone.
Also some forums had something to do with patching the kernels (don't know if that's what you call it) but i don't know if it's a safe thing to do since it might also permanently brick my phone.
Running Nougat April Security Patch.
Click to expand...
Click to collapse
You used the Chinese TWRP originally? Now you have alberto97 TWRP? Is this correct?
I would flash a custom ROM, why I'm saying that is it's far safer flashing a zip ROM than trying to flash the stock firmware.
Again I will remind people the flashing bootloaders on moto devices will inevitably cause hard bricks if you downgrade and the accept an ota.
---------- Post added at 06:47 PM ---------- Previous post was at 06:39 PM ----------
The only solution and this applies only if you want to remain on the stock ROM.
Download the retail firmware and only manually flash the boot.img, the 10 sparsechunks and the OEM.img.
Do not use rsdlite!!
This should boot your phone.
flashallthetime said:
You used the Chinese TWRP originally? Now you have alberto97 TWRP? Is this correct?
Click to expand...
Click to collapse
Yes,exactly.
flashallthetime said:
I would flash a custom ROM, why I'm saying that is it's far safer flashing a zip ROM than trying to flash the stock firmware.
Click to expand...
Click to collapse
Which Custom ROM do you think is the safest possible alternative?
flashallthetime said:
Again I will remind people the flashing bootloaders on moto devices will inevitably cause hard bricks if you downgrade and the accept an ota.
Click to expand...
Click to collapse
Can you explain this a bit better ? I would like to understand what i'm getting into !
flashallthetime said:
The only solution and this applies only if you want to remain on the stock ROM.
Download the retail firmware and only manually flash the boot.img, the 10 sparsechunks and the OEM.img.
Do not use rsdlite!!
This should boot your phone.
Click to expand...
Click to collapse
Could you,if possible, link to me to the respective article ? Do I need to Get the firmware for Nougat or does it depend on security patch as well?
Gotcha,No rsdlite !
porthumor said:
Yes,exactly.
Which Custom ROM do you think is the safest possible alternative?
Can you explain this a bit better ? I would like to understand what i'm getting into !
Could you,if possible, link to me to the respective article ? Do I need to Get the firmware for Nougat or does it depend on security patch as well?
Gotcha,No rsdlite !
Click to expand...
Click to collapse
I would install the aosp ROM as it is bare bones android.
As for bootloaders, when you receive an ota it flashes a new bootloader.
What some folks have done is because they feel like a new ota isn't working to their liking, they have downgraded their firmare, either by flashing the firmware package that can be downloaded. They flash the entire package including bootloader, what this does is set up a perfect hard brick scenerio for moto devices.
They accept an ota or for reasons that are beyond uderstanding, sideload the package and bam as soon as they restart there device it bricks their device due to the mismatched bootloaders.
You are unlocked and the easiest way to prevent hard bricks is to for go flashing firmware.
I'm running validus 7.1.2 on the original bootloader that was installed on MM.
---------- Post added at 07:19 PM ---------- Previous post was at 07:17 PM ----------
I'm attempting to build a stock flashable TWRP stock 7.1.1 ROM.
You may also flash any flashable TWRP stock 7 rom, either bye me or dedracks
flashallthetime said:
I would install the aosp ROM as it is bare bones android.
As for bootloaders, when you receive an ota it flashes a new bootloader.
What some folks have done is because they feel like a new ota isn't working to their liking, they have downgraded their firmare, either by flashing the firmware package that can be downloaded. They flash the entire package including bootloader, what this does is set up a perfect hard brick scenerio for moto devices.
They accept an ota or for reasons that are beyond uderstanding, sideload the package and bam as soon as they restart there device it bricks their device due to the mismatched bootloaders.
You are unlocked and the easiest way to prevent hard bricks is to for go flashing firmware.
I'm running validus 7.1.2 on the original bootloader that was installed on MM.
---------- Post added at 07:19 PM ---------- Previous post was at 07:17 PM ----------
I'm attempting to build a stock flashable TWRP stock 7.1.1 ROM.
You may also flash any flashable TWRP stock 7 rom, either bye me or dedracks
Click to expand...
Click to collapse
Is it fine if i go ahead with this and see if it works ?
I will try to flash a custom ROM if it doesn't.
porthumor said:
Is it fine if i go ahead with this and see if it works ?
I will try to flash a custom ROM if it doesn't.
Click to expand...
Click to collapse
That's fine and it's my ROM lol.
You may want to format your data but first try to flash the ROM and see if it boots.
That Chinese TWRP is a nasty thing
porthumor said:
How will flashing a new logo help me get out of boot loop ? AFAIK it only replaces the warning.
Click to expand...
Click to collapse
Bro are you sure you followed my instruction? In twrp menu click on reboot>bootloader
Then it will boot the device in bootloader mode. And in the bootloader menu click on "start" using the power button. Then it will boot your phone. Everytime you reboot your phone do the same step. If you want to get rid of that thing you need to flash official rom via rsd lite
Kap_Tutan said:
Bro are you sure you followed my instruction? In twrp menu click on reboot>bootloader
Then it will boot the device in bootloader mode. And in the bootloader menu click on "start" using the power button. Then it will boot your phone. Everytime you reboot your phone do the same step. If you want to get rid of that thing you need to flash official rom via rsd lite
Click to expand...
Click to collapse
Rsdlite sucks, never flash any firmware with resdlite unless you know which lines need to be removed from the text file that tells rsdlite what to flash.
manually flashing firmware is IMO much safer and all you need to flash is the boot.img all the spareschunks and oem.img
Kap_Tutan said:
Bro are you sure you followed my instruction? In twrp menu click on reboot>bootloader
Then it will boot the device in bootloader mode. And in the bootloader menu click on "start" using the power button. Then it will boot your phone. Everytime you reboot your phone do the same step. If you want to get rid of that thing you need to flash official rom via rsd lite
Click to expand...
Click to collapse
I did what you had asked me to ,unfortunately it doesn't work. I would be happy just being able to boot using the above method.
Thanks for the suggestion tho !
flashallthetime said:
That's fine and it's my ROM lol.
You may want to format your data but first try to flash the ROM and see if it boots.
That Chinese TWRP is a nasty thing
Click to expand...
Click to collapse
I'll try to get this done by tomorrow and see if it helps !
porthumor said:
I did what you had asked me to ,unfortunately it doesn't work. I would be happy just being able to boot using the above method.
Thanks for the suggestion tho !
I'll try to get this done by tomorrow and see if it helps !
Click to expand...
Click to collapse
Hopefully it does
flashallthetime said:
Rsdlite sucks, never flash any firmware with resdlite unless you know which lines need to be removed from the text file that tells rsdlite what to flash.
manually flashing firmware is IMO much safer and all you need to flash is the boot.img all the spareschunks and oem.img
Click to expand...
Click to collapse
When flashing the boot the sparsechunk and the oem then can i able to receive a OTA in my device? Or do i need to flash the recovery.img also?
Anyways thanks bro i learned again something from you
Kap_Tutan said:
When flashing the boot the sparsechunk and the oem then can i able to receive a OTA in my device? Or do i need to flash the recovery.img also?
Anyways thanks bro i learned again something from you
Click to expand...
Click to collapse
You also need to flash the recovery image as well
Good news, global ROM receives New update today.
Lenovo Z6 Pro.
Ok, so what's new / improvements ?
benjieb said:
Ok, so what's new / improvements ?
Click to expand...
Click to collapse
I don't know, I reinstall the firmware and lose the package, now system update refuse to give me again OTA ;-;
benjieb said:
Ok, so what's new / improvements ?
Click to expand...
Click to collapse
I don't have any idea how to recover my update ota, lenovo is trolling me.
I don't understand what your issue is. But if you missed OTA, is will come again soon.
I think one way to help that is to clear cache of update app. Just google it.
While you are there, once the OTA is downloaded to your phone AND before actually upgrading, it would be good to copy the update file to your PC and share it with others who don't get the OTA.
benjieb said:
I don't understand what your issue is. But if you missed OTA, is will come again soon.
I think one way to help that is to clear cache of update app. Just google it.
While you are there, once the OTA is downloaded to your phone AND before actually upgrading, it would be good to copy the update file to your PC and share it with others who don't get the OTA.
Click to expand...
Click to collapse
I found the solution, I'll repost the fastboot link that alexeei provided.
The overall improvements I've been noticing:
Connection problems that sometimes occurred in my region, are no longer giving.
Battery I noticed is lasting about 45 minutes longer.
PT-BR was basically 100% implemented in every layout.
The 4G connection has been improved.
I also believe that they have made some changes in the kernel, because the way the cores are working, is different gives version 284, ie better, I'll find out if in Benchmark improved anything.
And the audio in dolby atmos, I'm feeling that the audio has improved, it's louder and clearer.
camera haven't tested yet
However this is it: D
Here the link
Thanks for @alexeei
https://androidfilehost.com/?fid=1899786940962594224
hehk1234 said:
Here the link
Thanks for @alexeei
https://androidfilehost.com/?fid=1899786940962594224
Click to expand...
Click to collapse
this fastboot requires open bootloader?
x-geo said:
this fastboot requires open bootloader?
Click to expand...
Click to collapse
yes
alexeei said:
yes
Click to expand...
Click to collapse
And i can close it again after install it?
x-geo said:
And i can close it again after install it?
Click to expand...
Click to collapse
No, it's not neccessary
ok, i'll install it after it charges... this version comes with the new 4D Utouch?
In first Thank's a lot for the file !!!!
But after the flash , my phone don't reboot, hopefully reflash Alexeei Twrp solve my problem, evrithing seem ok now.
More info when more tested the rom
@alexeei, the file you shared is full ROW rom?
If so, when flashing with TWRP over an older version of ROW, will it keep data and apps?
Thanks!
I flash over my 284st the alexeei fastboot rom, but with the fastboot .bat.
And i have keep all my app,data and setting.
But the phone don't work in first attempt, must reflash the twrp for fix boot.
Don't know if this problème is only for me or more general.
My config before flash. Rom 11.0.284st + twrp alexeei + magisk 19.3.
Now everything seem ok and perf is good, except aod still dont work.
benjieb said:
@alexeei, the file you shared is full ROW rom?
If so, when flashing with TWRP over an older version of ROW, will it keep data and apps?
Thanks!
Click to expand...
Click to collapse
yes
---------- Post added at 08:27 PM ---------- Previous post was at 08:24 PM ----------
wlcbtd said:
I flash over my 284st the alexeei fastboot rom, but with the fastboot .bat.
And i have keep all my app,data and setting.
But the phone don't work in first attempt, must reflash the twrp for fix boot.
Don't know if this problème is only for me or more general.
My config before flash. Rom 11.0.284st + twrp alexeei + magisk 19.3.
Now everything seem ok and perf is good, except aod still dont work.
Click to expand...
Click to collapse
You only need flash vbmeta with --disable-verity option, i make it default in installer script in future releases.
Ok , thank's for the info !
How can I install this update?
Brillant !
Do you think it can be flashed over CN rom and keep data and apps?
Also, do you know where to find same type of rom file with latest CN rom?
I want to try latest ROW, but I know I will revert back to CN.
ManCast said:
How can I install this update?
Click to expand...
Click to collapse
See post #30 on these tread
https://forum.xda-developers.com/android/help/rom-lenovo-z6-pro-l78051-qpst-edl-t3947149
, same thing for these update.
But only if you already are in raw rom, update from chinese is untested by now.
RAW WW 1910.44 download
Link download: https://mega.nz/#!EwoXiSyK!KNprkA40oUHce-jl7WeHp9g-BohEVL--99_0klhm1go
Thanks to Vietnam ROG II telegram!
Root & boot stock WW19010.44
Link download: https://mega.nz/#!owR2BQJD!2ALZBYAYoSubuqUOZOQyg6R6YzFOub8Eus9bib9g00s
anyone got the CN version ? ty
How to update from 10.35 and stay rooted without losing data ?
If I use cmd "flashall-AFT" will it update my rom or i will b wiping my data too ?
Kindly point me in the ri8 direction.
zohaibshafijutt said:
How to update from 10.35 and stay rooted without losing data ?
If I use cmd "flashall-AFT" will it update my rom or i will b wiping my data too ?
Kindly point me in the ri8 direction.
Click to expand...
Click to collapse
Download the RAW, running flashall_AFT.cmd won't delete your data, phone will restart once done. takes about 5 mins. let phone reboot and finish updating in os then turn device off, boot back to fastboot and flash rootWW191044.img from post 2. Done, all up to date with latest rom, data intact and root back
(i did it myslef just moments ago, so it definitely works fine
reg66 said:
Download the RAW, running flashall_AFT.cmd won't delete your data, phone will restart once done. takes about 5 mins. let phone reboot and finish updating in os then turn device off, boot back to fastboot and flash rootWW191044.img from post 2. Done, all up to date with latest rom, data intact and root back
(i did it myslef just moments ago, so it definitely works fine
Click to expand...
Click to collapse
Thank you
reg66 said:
Download the RAW, running flashall_AFT.cmd won't delete your data, phone will restart once done. takes about 5 mins. let phone reboot and finish updating in os then turn device off, boot back to fastboot and flash rootWW191044.img from post 2. Done, all up to date with latest rom, data intact and root back
(i did it myslef just moments ago, so it definitely works fine
Click to expand...
Click to collapse
ota update works after flashing this?
arxxx said:
ota update works after flashing this?
Click to expand...
Click to collapse
Same as before, manual updates either ota or raw, i'm guessing...
reg66 said:
Same as before, manual updates either ota or raw, i'm guessing...
Click to expand...
Click to collapse
do you try manual update? with adb sideload or....?
con_sau_may_tinh said:
do you try manual update? with adb sideload or....?
Click to expand...
Click to collapse
the other guy was asking if i/we can get ota's after this update, but i don't know, this is the current latest... i used fastboot/adb to flash raw...
reg66 said:
the other guy was asking if i/we can get ota's after this update, but i don't know, this is the current latest... i used fastboot/adb to flash raw...
Click to expand...
Click to collapse
hi reg
if i want flash raw rom in page one n root..can i use this same method with this link?
i flash from ww1908.12 to ww1910.35 with this method.
my devices now in ww1910.35 witch lock bootloader n unroot.
https://forum.xda-developers.com/ro...check-change-fingerprint-cn-to-t4002279/page2
wilsen1985 said:
hi reg
if i want flash raw rom in page one n root..can i use this same method with this link?
i flash from ww1908.12 to ww1910.35 with this method.
my devices now in ww1910.35 witch lock bootloader n unroot.
https://forum.xda-developers.com/ro...check-change-fingerprint-cn-to-t4002279/page2
Click to expand...
Click to collapse
yes you can just straight away download the ww1910.44 raw, extract it, run flashall_AFT.cmd then wait (around 5-10 minutes) with cmd window open and later your phone will restart by itself and upgraded to ww1910.44 version
v3ll said:
yes you can just straight away download the ww1910.44 raw, extract it, run flashall_AFT.cmd then wait (around 5-10 minutes) with cmd window open and later your phone will restart by itself and upgraded to ww1910.44 version
Click to expand...
Click to collapse
my all data is lose?i dont want my all data lose.
this method no need unlock bootloder?
wilsen1985 said:
my all data is lose?i dont want my all data lose.
this method no need unlock bootloder?
Click to expand...
Click to collapse
no the data is not lose, just like OTA update. no need to unlock bootloader.
v3ll said:
no the data is not lose, just like OTA update. no need to unlock bootloader.
Click to expand...
Click to collapse
oh nice info bro thx
Thank you so much
Not sure what happened. Updated this via flash but this rom seems to freeze my phone every now and then.
lavenderyew said:
Not sure what happened. Updated this via flash but this rom seems to freeze my phone every now and then.
Click to expand...
Click to collapse
A few others have reported this on telegram, not sure how to fix it, seems to only affect a few... Perhaps try flashing again?
lavenderyew said:
Not sure what happened. Updated this via flash but this rom seems to freeze my phone every now and then.
Click to expand...
Click to collapse
Someone on telegram group reported that disabling 'Always-on panel' and 'Lift to check phone' under display settings seems to have fixed it for them... might wanna try that
Edit : no it wasn't, it was disabling pocket mode in Settings
Thanks for all the sharing.
But looking at the problems of .44 , is it advisable to perform the update?