Develop Bugs

Where the 3500 patch BT ???

Can anyone tellme where i can find the patch for 3500 BT.
I have Qtek 9090 (Italian Version) with many problem with some headset bt...
Thx
Alex

Yep, and I need it to...who can help?

Tofffy said:
Can anyone tellme where i can find the patch for 3500 BT.
I have Qtek 9090 (Italian Version) with many problem with some headset bt...
Thx
Alex
Click to expand...
Click to collapse
Here it is...it is in Dutch...but it works!!!
http://groups.msn.com/QTEK9090/gene..._Message=153&LastModified=4675501466007212641

what does this do exactly?

I have a copy in English which you can get from here[/url]

ProphetX said:
what does this do exactly?
Click to expand...
Click to collapse
This update patches Bluetooth BT -PPC/PE version: 1.0.0 Build 2400 into BT -PPC/PE version: 1.0.0 Build 3500.
# First install WWE_124_008.sa.CAB
# Than install OEM_Patche_12100401.sa.CAB
# Soft reset your device and you're ready.
After the patch the Bluetooth works better!!!

THANKS!
Thank you for this post, finaly my BT is working. GREAT.

Here it is from Dangaard:
New Bluetooth stack for Qtek 9090!
As some users have experienced problems with Bluetooth connectivity in Qtek 9090, we now offer an upgrade of the Bluetooth stack from Build 2200 to build 3500. This upgrade fixes most of the Bluetooth problems in the device.
Please note: Installation and use of this upgrade is entirely at your own risk. Dangaard Telecom disclaims all liability issues.
To install the upgrade, download the two files;
- OEM_XXX (matching the language of your Qtek, e.g. OEM_WWE = World Wide English)
- OEM_Patche_12100401.sa.CAB
- Copy both files into a temporary folder on the Qtek
- Open File Explorer on the Qtek and find the temporary folder
- Tab on OEM_XXX… and wait till it is installed
- Tab on OEM_Patche… and wait till it is installed.
- Make a soft reset (small hole next to battery lock) and wait for the device to reboot.
To check if the update was successfully installed, enter;
Start -> Settings -> Connections -> Bluetooth
Find the “About” screen and check the build version. It is supposed to be 3500.
The files can be downloaded from this link:
http://www.dangaard.com/qtek 9090 bluetooth patch/
Carlis

Universal Broadcomm Stack (Test)

Universal Broadcomm Stack (Test)
This is an earlier stage of porting Broadcomm Stack to universal device so something might not work, or not work very good...hopes that I didn't forgot something... and dont expect everything to be perfect... its still on test stage...
Tested Operation (On My AKU3.5/Crossbow):
- Headset/Handsfree (Tested With Nokia BH700)
- A2DP (Tested With My PC)
- File Transfer (Tested With Nokia phones, Desktop PC, PocketPC, HP Ipaq)
- Networking / LAN Access with my pc
- Bluetooth ActiveSync
- Bluetooth Serial Port
- Business Card Exchange (Object Push)
- Connect to internet via other Mobile Phone (BT DUN With Nokia 6165i CDMA Phone)
Untested operation:
- Bluetooth SAP Profile (Broadcom Version)
- Bluetooth PAN Profile
The instalation is quite complicated a bit, I've already talk with vijay about this,
hopes that he'll come out with app that will switch between the two stack only with soft-reset (app that will read *.ini input is enough, or read *.reg is more cool), cos My v1.1 crossbow is hv this stack built in (Dual bluetooth stack capability), u just need to activate it, so user might switch between the two stack easily with softreset only.
Instalation:
1. Install SIGN_UNIBR176.0500.CAB
2. Restart.
Uninstall:
1. Install ActivateMSBT.CAB FIRST.
2. Restart
3. Uninstal/remove Broadcomm Stack.
I need everyone to be involved with this one... any input is more then welcome... lets work together guys and make this stack better...
Get the file here:
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNIBR176.0500.zip
Unsigned
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNSIGN_UNI1.7.6.0500.zip
UnRoute.exe are taken from superdave. Some parts of the stack is taken from Fujitsu Siemens T830, some from ASUS P525.
I still need couple of files, Anyone have T830 rom dump??
I've some work with apache device, from its configuration, it should work also with apache... I dont know, I dont hv the device..
regard,
Helmi

Lol SWEET
Read your pm just a second ago
Looks like i'm the first to dive in.
It's friday here so I'll prolly install it right away and test it over the weekend.
dips on the work dude

I tried to install it several times, but everytime I get the message 'Installation of SIGN_UNIBR176.0500.CAB was unsuccesful.'
I'd love to give it a try...

I am unable to install the SIGN_uNI cab file, I tried installing to device and storage. I'm using Helmi 3.5 rom 1.3.1.

Looks like I'm not the only one
I'm using the WM6 crossbow rom
I've tried:
Close app
disable BT
install (no success)
soft reset
flight modus on (no success)

hmm... I'll post the unsigned one...
EDIT:
check this setup.
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNSIGN_UNI1.7.6.0500.zip

helmi_c said:
hmm... I'll post the unsigned one...
Click to expand...
Click to collapse
Thank you manyfold

OK, able to install the unsigned one...Thnks

Unsigned version installs fine on my Aku 3.3 Apache. BT starts and the blue light blinks. Unfortunately, my stereo headset is in my car so I can't test it. I'm really confident it will work fine.

Bushrod said:
Unsigned version installs fine on my Aku 3.3 Apache. BT starts and the blue light blinks. Unfortunately, my stereo headset is in my car so I can't test it. I'm really confident it will work fine.
Click to expand...
Click to collapse
If it also work on my AKU3.3 for Apache then maybe I'll built in ROM in my next Apache Custom rom, thats will be cool, with ability to switch between stack, but I just can't find time to create the switching app...

Working with Sony-Ericsson HBH-DS970 (stereo) Fine! Thanks!

Thanks helmi_c, I find it super!!!
It works Perfect with i.Tech Clip R35!

Thanks Helmi
Working perfectly with VC 1.6 as well.

I know I speak for everyone with an Apache when I say that we are eagerly awaiting your next custom rom!

working with cario scala 500. Good range too, a lot better than ms stack.

Hmmm... I get an "BT Radio failed to turn on due to Insufficient driver memory available..." error on a Vanilla AKU3.5 rom (helmi's own vanilla rom). I've got nothing else installed, it's clean...
Strange, does anyone know what to do?
TIA!

hi
please can somebody post the link where can i get the ActivateMSBT.CAB
thanks so lot
regards
nusy

2marianna: download files from first post

Do we install your Bluetooth stack AS WELL AS uninstall the current MS Stack? Or is it OK to leave the MS one installed? Thanks

helmi_c
I have a ppc 6700 running your AKU 3.3. Installed the unsigned BT stack, reset. Program icons all loaded. Tried to start BT, Blue LED flashed once then I got the BTTrayCE error message "BT Radio failed to turn on due to Insufficient driver memory available..." I reset again, same thing happens again...

Wm6 Usb/bluetooth Modem. Help!!!!!

Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated

leoni1980 said:
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
Click to expand...
Click to collapse
This has to do with the fact that ics doesn't work with the toshiba bluetooth stack.... If you change to the microsoft stack on yout XP laptop you will be able to use ICS.
Cheers,
HJ

only problem is, that not all PC bluetooth device have this choice, I mean change stack to microsoft.... before you buy any BT stick, look at manufarcuter web, if it is possible to use MS stack. I dont want to make propaganda for MSI products, but there is few BT, which have this choice. actually I using THIS one, and here is possible to install MS stack. here is manual, how to install this device with MS BT stack.
PS: this question has been answered XXX times, so try to search before ask

my bluetooth is integrated into my laptop, hence the convenience. why have microsoft taken a seemingly downward step in windows mobile 6 and made it even LESS compatible than before?!? seems a bit stupid to me.
Also this doesn't answer the question of why I am unable to connect my device via USB. I need this function for work. is there any way of installing the old wireless modem app as a simple solution?
thanks everyone for your help so far

i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX

vdavide said:
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
Click to expand...
Click to collapse
Care to tell us what laptop are you using and what bluetooth stack involved because some hardware could be forced to be supported by the MS driver.

sorted
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.

---deleted---

leoni1980 said:
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
Click to expand...
Click to collapse
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again

vdavide said:
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
Click to expand...
Click to collapse
Connection through USB supposed to be ok, hmm... but you can try to force the bluetooth hardware to be supported by the MS driver. Could you please do this and give me the details.
The step:
1. Start > Control Panel > System > Hardware > Device Manager
2. Find the unknown USB driver ( The one with the ? beside it)and right clicking on it > Properties > Details > Click the dropdown option and select 'Hardware Ids'
3. You will see something like 'USB\Vid_044E&Pid_300c&Rev_1915' and maybe 'USB\Vid_044E&Pid_300c'.
4. Write down the Ids. and post it here.

@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX

vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I hope you've given me the complete Ids.If so then try this one. Backup the original bth.inf inside \windows\inf\ folder and replace with the one from this archive. Now try to install again by pointing to the new bth.inf. But please uninstall any previous installation first. If not success then tell me since I'm trying to use the widcomm stack.

thx CYPHOL , i will try tomorrow
i'm added the original inf file for this device ...

vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I tried the Internet Sharing facility on my XP tower upstairs (which has never had Activsync on it) and it works just the same - no need for drivers - it's as if I'm just plugging an ethernet cable in.
Be interested to know if the same will be true of old laptops with SP1, as is mine at work.

I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?

lanwarrior said:
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
Click to expand...
Click to collapse
WM6 is using PANU whereas WM5 is using NAP as to connect through Bluetooth but if you use USB it should connect as is only that you have to switch the bluetooth off before making the connection.
FYI, I'm using Vaio VGN-TX37GP and can connect through both the USB and Bluetooth conns. after modifying the infos on the MS inf driver file.

@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !

vdavide said:
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
Click to expand...
Click to collapse
Nice to hear that but sorry for my careless mistakes done in doing the scripting.

I got ths same issue.
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.

briols6 said:
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
Click to expand...
Click to collapse
Check this post:
http://forum.xda-developers.com/showthread.php?t=298691#10

old new Problem Bluetooth

Hi,
i have problemes with my Bluetooth: license is expired
i found this in this forum:
http://forum.xda-developers.com/showthread.php?t=228486&page=8
But im not sure if this is the right way to do it?
can someone helf PLEASE

Hi
Just do a soft reset then it wil work for awile again,a lot fo them have it sometime.
PS . wat is jou'r widcomm bluetooth version

qtek 9090 upgrading problem

Hi, im newbe so, please be patient.
i've upgraded mi qtek 9090 frow win 2003 se to win mobile 6 but i have some problem
the phone module is not working anymore ( it's no possible to turn phone on)
the pda do not save the gps settings after it discover by blutooh ( every time i turn off the gps reciver and turn on again i have to set again the serial port, the passkey etc ).
i've tryed to upgrade the radio but i'm not able do download file from ftp at the following link because ftp doesn't work:
ftp://xda:[email protected]/BlueAngel/Radio_Roms/Radio_1.15_Type_II/BA_RRPT_Radio_11500.exe
at the moment my configuration is:
rom vers 5.60.00.wwe
rom date 03/02/05
radio verison 1.13.00
protocol version 1.337.42
ext rom version none
at the time im writing it seems that phone module is working again( ghosts in my pda ? )....anyway
can someone help me suggesting something or can someone send my the file i need to upgrade my radio or blutooh version (if this can help ) by email?([email protected])
thank you in advance and sorry 4 my english.

i think this is a wrong place to post.
i'll post it again in bluangel 3d
sorry