Has anyone tested the latest ROM from the Club I-mate site ?
http://www.clubimate.com/index.asp?PageAction=PDA2K
Not quite sure whether this update supersedes the previous BT patches (#1&2) or whether I still need to download BT Patch #2.
Anyone in the know ?
gp
This ROM contains old BT stack: 1.0.0 Build 2400. After upgraiding you'll need to install BT update #2.
that is not this way, it takes the 3500 of BT
Hi guys!
First of all my very atmost gratitude to all people bringing the right knowledge to this forum! It has given me a lot of ways to tweak and upgrade my MDA Pro (Universal). Thanks again. I upgraded my MDA pro in 30 minutes to the latest iMATE WWE + radio 1.04.02!!
Main benefits for me: built-in SKYPE (that works), Built-in Pocket MSN and NOT built-in, but working now: MS voice command (v1.5)
Since it took me a while collecting all relevant info for upgrading and tweaking my MDA pro, i wanted to share my experiences with you and let you know how i finally managed everything. Also because some posts contain outdated info about the upgrade process. So here we go:
UPDATE MDA PRO (NL) -> iMate Jasjar WWE + radio 1.04.02
----------------------------------------------------------------------
First of all get the right files from:
ftp://xdaupload:[email protected]/Universal
Get the files:
* JASJAR_WWE_11353_137_10301.exe
(from /Universal/Shipped%20ROM/JASJAR_WWE_11353_137_10301/)
and the file:
* UNIVERSAL - JASJAR - Radio Version 1.04.02.rar
(from /Universal/)
- Unpack both files into a separate directory (use WINrar for both)
- Unplug universal (MDA pro) from USB
- In activesync, under connection settings, disable USB en COM connections
- Put MDA pro in bootloader by pressing LIGHT button + Power + RESET
(you can see USB vaguely on your screen, since you don't have backlight on)
- Connect MDA pro on USB; Windows will recognize new USB device
- Launch the file from the WWE update: MaUpgradeUt_noID.exe
- Preform the upgrade (this process takes about 15 to 20 minutes)
(I didnt get any country error here as some described earlier, it went smoothly)
- After it finishes, do not disconnect the MDA pro and DO NOT reset it. Immediately preform the next upgrade:
- Run MaUpgradeUt_noID.exe from the radio 1.04.02 directory
- This will take about 10-15 minutes
- After it finishes, disconnect from USB and give cold reset: POWER + reset
- You'll see the new iMATE splash screen, and then the Windows Mobile screen (first boot will take some time)
- Then the device will ask to first-setup and you're IN!
I did NOT have to install anything from the extended ROM, as others posted. The only thing i needed to do after upgrade was:
* Make new 'GPRS, 3G' connection for T-mobile, using the settings: APN: internet, user/pwd: tmobile
Then I deleted my old partnership on the ActiveSync, and activated USB and COM connections again, and synchronised my device! Et voila!!!
Then I installed my previous apps (see tip list on end of posting) and made the essential registry tweaks to my device, which can be found on:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Alrighty, hope this will bring the same smile to your face as it did on mine
Take care,
Guido
---------------------------------------
Some other tips I'd like to share:
* install Microsoft Portrait v2.3 for audio/video conferencing!! On GPRS is works better then skype for me! Audio is perfect, video connection (even at lowest settings) scrambles the audio a bit!
* Magic Button is top app!
* VNCviewer does a sweet job on the VGA screen (terminal services works fine too, but doesn't go fullscreen)
* of course Tomtom 5.1 + checkpoint 5.02 and/or POIedit
* Resco File explorer + Registry editor (must have!)
* Upgrading to Skype 1.2 beta did not work for me, stick to the default one!
Guido, execellent post!!!
---------------------------------------
Some other tips I'd like to share:
* of course Tomtom 5.1 + checkpoint 5.02 and/or POIedit
* Upgrading to Skype 1.2 beta did not work for me, stick to the default one!
Click to expand...
Click to collapse
Having a diferent build (please see below), I'm very much interested to see your tips on the above, TomTom (normal installation doesn' go...!?!) and skype (pre-installed in my JASJAR, but I haven't been able to have it working at all...!?!)
Thanks in advance.
_________________
BetoX
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER MANUAL UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE (installed manually using Total Commander)
zeg.... ik kan de bestanden niet vinden op die ftp servers.
tempelier245 said:
zeg.... ik kan de bestanden niet vinden op die ftp servers.
Click to expand...
Click to collapse
Somebody has deleted all files in the upload section, now the most of the files are reposted again(thanx), i guess, their still are missing some shipped roms.
only rom their is for now; JASJAR_WWE_11353_137_10402.rar(if it is a full rom)
So think for now that you have to browse the ftp upload part.
ftp://xdaupload:[email protected]/Universal
simlock
hi
is the simlock from t-mobile removed after you did the update?
because you also updated the radio version........
ok please help, i cant use my MDA Pro cause i have Vodafone!
Thanks in advance
ROM uploaded / reply to questions
Hi guys,
I just read that someone cleared out some files in the upload dir!
So, as we speak the uploading of the JASJAR rom update is in progress. Should be in shipped rom any moment now.
For further replying on your msgs;
- Haven't checked if the unit is simlock free now, but I think i won't be.. I'll keep you posted.
- I read somewhere that Skype needs a minimum of 18MB program memory to run correctly. Right now I managed to get 21MB free, and everything works smoothly.
- TomTom had to be installed with the 4 cabs files, since the original setup didn't work for me (crashed in installer)
And once more; I really love how MS portrait is working for audio/video conferencing. Especially since of 15-11-2005 I'm using UMTS (!) on T-Mobile NL
Looking forward to your experiences.
Take care,
Guido
thanks guido.... how are you using umts on t-mobile ???
Is it possible to put back the original mda pro rom if something goes wrong... like a registry edit.... I don't really know how everything works and I don't want to destroy my new toy !!!
Reply / Exec ROM update / UMTS / Appz / Reg tweaks
Once you upgrade you go beyond the ** Point of no-return **
But sometimes you gotta take some risks in life to advance
Actually again I took the risk yesterday of trying out the XDA Exec ROM upgrade. And I must say; this one works pretty fine for me too. And right now I gained 22,35MB free RAM memeory, so I managed to get Skype 1.2 beta running!
Furthermore I'm test using the UMTS network of T-Mobile NL. I already clocked speeds up to 320 Kbps in the downstream; pretty neat Skype and Portrait work excellent on these new speeds.
And I've tested if the upgrade unlocked the device; but.... as I've expected: no....
For now I would suggest going for the O2 Exec upgrade, also since it has the 1.04.02 radio builtin. Things I like more about this upgrade:
- More FREE program memory (allowing skype 1.2 to run for example)
- Nicer SPLASH screen
- Seems to operate a bit faster
Once you installed the Exec ROM you can choose 'Install Type' under programs; this is where you select the Corporate Mode, and then give in the code 0506. (This wasn't really described clearly for me in the other posts). Then reset. Furthermore I deleted all other O2 stuff on the device (don't forget the shortcuts under Windows\StartUp). Actually I only left sddaemon in the startup group, giving me max of working RAM.
Thus, now running:
R 1.04.02
D 1.13.48
G 42.37.P8
installed appz:
- Skype 1.2 beta
- TomTom 5.1
- MS Portrait v2.3
- MS Voice Command v1.5
- Resco File Explorer
- Resco Registry Editor
- Magic Button
- Pocket Informant 2005
- Some small utils: 'Running Programs'/'Reset'/'CloseAll'/'TrayLaunch'
- Total Commander (only for vieweing Ext Rom)
and registry tweaks: (see my first post)
- GPS
- Fonts
- Bluetooth OBEX
- data connection always on
- soft buttons changed
- MS voice command for Bluetooth headset
- Glyph cache size
- Terminal Services cache size
- Homepage hardware button change
All works deliciously
cheers,
Guido
Reply / Exec ROM update
Hi,
I just took the risk to advance, however when upgrading to the XDA Exec ROM I got the message that (after doing the hardware inspectation):
ERROR 120: Country ID Error
The ROM image that you are trying to use is not designed to work on your device.....
I have an MDA Pro.
Anyone have useful ideas?
Thanks in advance.
Greetz,
Ramoray
Re: Reply / Exec ROM update
ramoray said:
Hi,
I just took the risk to advance, however when upgrading to the XDA Exec ROM I got the message that (after doing the hardware inspectation):
ERROR 120: Country ID Error
Click to expand...
Click to collapse
I read this before in other posts. It seems that when you launch the updater the 2nd time, it doesn't produce the country error anymore
Hope this will be the same in your case!
And another important thing mentioned before; I used MaUpgradeUt_noID.exe (from the Jasjar file or Radio 1.04.02 file) to preform the upgrade. Just copy this file in the Exec directory and launch it; it will display another xda, but this is normal and will work fine for the universal
Good luck!
Cheers,
Guido
umts and simlock
Hi Guido,
thanks again for your cool posting every time! You keep us informed.
First off all pretty that the Simlock isn't removed after the update! I want to update too but first i want to remove my simlock. After that i will do an update and use my device just like i used mine Qtek 9090 before!
1 More question is about Tom Tom 5.1 when i try to install it i get an error is there an guide out there to install Tom Tom 5.1 on WM 5 ?
Ok thanks for now and keep us informed!
Surinamer!
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
upgrade MDA Pro rom
Hi Guido,
Thanks for your useful info. The MaUpgradeUt_noID.exe did the job, my T-Mobile settings are gone now.
However I didn't had the time to do the XDA upgrade yet, but will do tonight.
Anyway thanks.
Greetz,
Ramoray
Re: upgrade MDA Pro rom
ramoray said:
Thanks for your useful info. The MaUpgradeUt_noID.exe did the job, my T-Mobile settings are gone now.
However I didn't had the time to do the XDA upgrade yet, but will do tonight.
Click to expand...
Click to collapse
Congratulations! Welcome to the other side
I'm curious what you'll think about the Exec in comparison to the Jasjar.
Keep us posted.
Cheers,
Guido
Update 21/11: Video calling is supported now; call T-Mobile NL helpdesk to activate it (see my further posting for other tips)
tempelier245 said:
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
Click to expand...
Click to collapse
Will you go for the Exec or the Jasjar upgrade?
Concerning UMTS; I'm test using it on T-Mobile NL. Officially it will be launched in 2006. I'll keep you informed about the progress.
Video Calling isn't yet supported on the MDA, but the data connection is! Topping at 340 Kbps, which is pretty fast for a mobile device
Cheers,
Guido
gnuijten said:
tempelier245 said:
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
Click to expand...
Click to collapse
Will you go for the Exec or the Jasjar upgrade?
Concerning UMTS; I'm test/beta using it for T-Mobile NL. Officially it will be launched in 2006. I'll keep you informed about the progress.
Video Calling isn't yet supported on the MDA, but the data connection is! Topping at 340 Kbps, which is pretty fast for a mobile device
Cheers,
Guido
Click to expand...
Click to collapse
Hi There,
From today i noticed that I have an UMTS connection on my MDA PRO. I have flashed my MDA pro with anouther rom. UMTS is working fine. Making a videocall is not successfull. Do you have any tips to make it work or is it not supported by T-mobile
Qtek 9000 error and upgrade to imate latest firmware?
Hi,
Have been reading through all of your responses. Very impressive.
Today i received my Qtek 9000.
It seems to be a wonderful phone and with the subscriptions vodafone has in sweden i get free calls and free downloads. Looked great.
Now to my problem.
I´ve put in all settings that vodafone provides for other ppc´s and it´s working on them.
It connects, dissapears, connects again.
And i get:
Cannot Connect:
Dialed: services.vodafone.net
Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer´s documentation and try again.
I´ve downloaded these 2 files:
JASJAR_WWE_11353_137_10301.exe
UNIVERSAL - JASJAR - Radio Version 1.04.02.rar
Will an upgrade remove my problem?
But my question is, i bought it at expansys, why buy qtek if i could have bought an iMate instead? I mean will i now rebrand it to be an imate?
Are there no software updates from qtek?
Since this one is brand new, should i return it and get an iMate instead?
I will also need to get the regfix for swedish keyboard, would be entirely greatful if it could be arranged.
Very first message from a brand new forum member!
Best regards,
Daniel Eriksson
Guido,
Is it possible for me to get acces to the umts from t-mobile.. Furthermore I'm thinking that I will install the exec rom on my mda pro. I'll receive my device tomorrow so I'll see. Do you think its a good purchase ??
Thanks
guido.... btw ik snap echt geen f*ck van dat editen van je registry.... kan je me misschien in het nederlands uitleggen wat het inhoud/betekent ?
Hello
I have a Siemens SX66 with the much talked about Bluetooth issues I'm trying to resolve:
1. BT Activesync connection cuts out when uploading/downloading
2. BT connection cuts out when connected to my HF820 BT Moto Speakerphone
I'm attributing this to problem of the PDA going into "sleep" mode. I heard clubimate.com has the BT patches but I cannot register on the website because I have a Siemens and not an I-Mate PDA. Please, if you can provide a link to the patches (all other links I've found on this site or web have been dead) or if you could email me the .cab file. I would really appreciate it - [email protected]
Unless of course you think it may be another problem.
I am most appreciative.
Nick
Clubimate published "PDA2k UniDirectional Patch.sa.cab", it is for 1.40 ROM or older. This is for resolving problem with no sound when someone calls/you calls someone disappeared. I've never heard abut BT updates from Clubimate.
I have a BroadcomCorp_BT1.0.0.3900.cab and can send it to you. What is your version of BT?
Yes. Supposedly this Clubimate produced patch solves a lot of BT issues. Please, see the following links:
http://forum.xda-developers.com/viewtopic.php?t=14277
http://forum.xda-developers.com/viewtopic.php?p=73927
But like I said all the links are dead and I can't get an account on clubimate.
BT Build 3900 would be great! [email protected]
Rom version: 1.40.00 WWE
Radio version 1.15.00
ExtRom version: 1.40.125 WWE
Hi guys,
I got my HT820 stereo headphone.
Everything is okay, except the Audio interruptions (5-8 seconds) I face once in every 25-30 seconds.
I am sure, many of you would have gone through this issue and got it solved.
Find below my ROM configurations and let me know how to overcome this problem.
-Ari
Search Zoki A2DP hack
Is this the ZoKi BT Hack?
http://blog.waynezhang.com/index.php?tag=d900
A2DP registry hack to avoid Audio Interruptions
Hi James72,
Many thanks for your reply. When I could not copy .ddl files into windows.
It says "read only" or "no memory". I tried it by exploring in Activesync.
I also uploaded the tornado's registry hack files in this message.
-Ari
I use this:
Re: Tornado A2DP Registry hack in JasJar - To use Motorola H
i have the QTEK ROM, and i get the same thing with WIFI enabled. just a guess.
James72 said:
I use this:
Click to expand...
Click to collapse
Doesn't work on the AKU 3.2 ROM by Lt.Cmdr.Ivan
richardlai said:
James72 said:
I use this:
Click to expand...
Click to collapse
Doesn't work on the AKU 3.2 ROM by Lt.Cmdr.Ivan
Click to expand...
Click to collapse
Does this mean, even Lt.Cmdr.Ivan's ROM with AKU 3.2 still experiences the BT lag issue?
I wanted to try his ROM, but if this problem is there too then I'll wait a bit till December to do a full install.
Universal Broadcomm Stack (Test)
This is an earlier stage of porting Broadcomm Stack to universal device so something might not work, or not work very good...hopes that I didn't forgot something... and dont expect everything to be perfect... its still on test stage...
Tested Operation (On My AKU3.5/Crossbow):
- Headset/Handsfree (Tested With Nokia BH700)
- A2DP (Tested With My PC)
- File Transfer (Tested With Nokia phones, Desktop PC, PocketPC, HP Ipaq)
- Networking / LAN Access with my pc
- Bluetooth ActiveSync
- Bluetooth Serial Port
- Business Card Exchange (Object Push)
- Connect to internet via other Mobile Phone (BT DUN With Nokia 6165i CDMA Phone)
Untested operation:
- Bluetooth SAP Profile (Broadcom Version)
- Bluetooth PAN Profile
The instalation is quite complicated a bit, I've already talk with vijay about this,
hopes that he'll come out with app that will switch between the two stack only with soft-reset (app that will read *.ini input is enough, or read *.reg is more cool), cos My v1.1 crossbow is hv this stack built in (Dual bluetooth stack capability), u just need to activate it, so user might switch between the two stack easily with softreset only.
Instalation:
1. Install SIGN_UNIBR176.0500.CAB
2. Restart.
Uninstall:
1. Install ActivateMSBT.CAB FIRST.
2. Restart
3. Uninstal/remove Broadcomm Stack.
I need everyone to be involved with this one... any input is more then welcome... lets work together guys and make this stack better...
Get the file here:
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNIBR176.0500.zip
Unsigned
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNSIGN_UNI1.7.6.0500.zip
UnRoute.exe are taken from superdave. Some parts of the stack is taken from Fujitsu Siemens T830, some from ASUS P525.
I still need couple of files, Anyone have T830 rom dump??
I've some work with apache device, from its configuration, it should work also with apache... I dont know, I dont hv the device..
regard,
Helmi
Lol SWEET
Read your pm just a second ago
Looks like i'm the first to dive in.
It's friday here so I'll prolly install it right away and test it over the weekend.
dips on the work dude
I tried to install it several times, but everytime I get the message 'Installation of SIGN_UNIBR176.0500.CAB was unsuccesful.'
I'd love to give it a try...
I am unable to install the SIGN_uNI cab file, I tried installing to device and storage. I'm using Helmi 3.5 rom 1.3.1.
Looks like I'm not the only one
I'm using the WM6 crossbow rom
I've tried:
Close app
disable BT
install (no success)
soft reset
flight modus on (no success)
hmm... I'll post the unsigned one...
EDIT:
check this setup.
ftp://xda:[email protected]/Universal/Cooked_ROMs/helmi_c/UNSIGN_UNI1.7.6.0500.zip
helmi_c said:
hmm... I'll post the unsigned one...
Click to expand...
Click to collapse
Thank you manyfold
OK, able to install the unsigned one...Thnks
Unsigned version installs fine on my Aku 3.3 Apache. BT starts and the blue light blinks. Unfortunately, my stereo headset is in my car so I can't test it. I'm really confident it will work fine.
Bushrod said:
Unsigned version installs fine on my Aku 3.3 Apache. BT starts and the blue light blinks. Unfortunately, my stereo headset is in my car so I can't test it. I'm really confident it will work fine.
Click to expand...
Click to collapse
If it also work on my AKU3.3 for Apache then maybe I'll built in ROM in my next Apache Custom rom, thats will be cool, with ability to switch between stack, but I just can't find time to create the switching app...
Working with Sony-Ericsson HBH-DS970 (stereo) Fine! Thanks!
Thanks helmi_c, I find it super!!!
It works Perfect with i.Tech Clip R35!
Thanks Helmi
Working perfectly with VC 1.6 as well.
I know I speak for everyone with an Apache when I say that we are eagerly awaiting your next custom rom!
working with cario scala 500. Good range too, a lot better than ms stack.
Hmmm... I get an "BT Radio failed to turn on due to Insufficient driver memory available..." error on a Vanilla AKU3.5 rom (helmi's own vanilla rom). I've got nothing else installed, it's clean...
Strange, does anyone know what to do?
TIA!
hi
please can somebody post the link where can i get the ActivateMSBT.CAB
thanks so lot
regards
nusy
2marianna: download files from first post
Do we install your Bluetooth stack AS WELL AS uninstall the current MS Stack? Or is it OK to leave the MS one installed? Thanks
helmi_c
I have a ppc 6700 running your AKU 3.3. Installed the unsigned BT stack, reset. Program icons all loaded. Tried to start BT, Blue LED flashed once then I got the BTTrayCE error message "BT Radio failed to turn on due to Insufficient driver memory available..." I reset again, same thing happens again...